Master Page Header and Footer in Page Viewer Web Part

Hi.
I created a View in Pages Library to view specific folders.
After that i added one Page Viewer web part to one of the aspx page.
There in the Page Viewer web part properties Link i have provided the url of the view.
It is displaying the folders but at the same time it is displaying the master page header and footer inside the web part.
Now i need to display the folders alone inside the Page Viewer web part.
Please let me know how to exclude the master page header and footer inside the Page Viewer web part?
Regards,
Sudheer
Thanks & Regards, Sudheer

I think that is the default behavior of the page viewer webpart.
In the page viewer web part,your just enter the url of the website.So that is treated as webpage and it is displaying as per page.
http://meritsolutions.com/meritmatters/archives/576-Displaying-a-File,-Folder-or-Web-Page-in-the-Page-Viewer-Web-Part.html
If you want to display a folder, type in a network path to that folder under Link and the folder content will be displayed.
Find the more details about page viewer webpart in msdn
http://office.microsoft.com/en-in/sharepoint-server-help/page-viewer-web-part-HA010024045.aspx

Similar Messages

Removing the header and footer in Pages

I just began to use Pages after purchasing a new ibook. In AppleWorks, headers and footers were never inserted by default. In Pages, how can I remove the header and footer in Pages so I can have more space for the body section of the document?

I had already set page margins to zero, and I disagree with you: Headers and footers still appear with a height of approximately 1/8 inch.
SInce I posted my previous message, I have experimented a bit. I was able to (almost but not quite) totally eliminate the header and footer by clicking into the header and footer area and reducing the font size to the absolute minimum. After having done that, the body was basically in-line with 0" on the vertical page ruler.
Also, in my opinion, whether or not most printers do a full page bleed is irrelevant. I should be able to work with the page body without its being offset from the page ruler if I don't want to employ a header or footer.
Rusty

Page Header and Footer in Printer Friendly mode

Hi,
I have a report which has more than 500 rows and I want to print them.
The printer friendly mode works fine, but is it possible that there is a page "header" and "footer" on every page which is printed?
For example, that the column headings are on every page which was printed?
Or that at the bottom of each page is the page number displayed?
Does anyone have an idea?
Thanks,
Tim

IE and Firefox are designed for WEB pages.
WEB pages are on Internet. Security is important and browser should not compromise user to use it.
Many users=Many printers!
If you want to write app for especially one printer and know users (Intranet application) then here is what you can do:
1) Use IE
2) write your own ocx with interface for your needs.
3) every user should implement this ocx in their browser.
4) When they accept your ocx, then in this "small app" you could do as much as this user can do on their own windows. So setting printer, orientation and size is a peace of cake.
5) make your report regarding this printer
And this is it!
And few other things...
If user choose larger font then your HTML is broken!!!
For that I think that PL/PDF or Mail merge is better solution!

How to set a page header and footer of an excel file i'm creating

Hello !
SORRY MY ENGLISH is very BAD.
I tried to set page header and footer in Excel sheet with ABAP ole
DATA : BEGIN OF enter,
x(1) TYPE x VALUE '0D',
END OF enter.
DATA : format(255) TYPE c.
FORM set_page_sheet.
CALL METHOD OF excel 'ActiveSheet' = sheet.
CALL METHOD OF sheet 'PageSetup' = pagesetup.
SET PROPERTY OF pagesetup 'Orientation' = xllandscape.
SET PROPERTY OF pagesetup 'PrintTitleRows' = '$9:$12'.
CLEAR format.
ERROR
CONCATENATE 'PAGESHEET' enter-x 'PAGE &P/&N' INTO format.
ERROR
SET PROPERTY OF pagesetup 'RightHeader' = format.
CLEAR format.
CONCATENATE ' Text 1 ' enter-x 'Text 2'
enter-x 'Text 3 ' INTO format.
SET PROPERTY OF pagesetup 'RightFooter' = format.
FREE OBJECT pagesetup.
ENDFORM. " set_page_sheet
Activate report -
ERROR - The enter-x must by data type c or another then data type x
Thanks for answer.

Try to define ENTER this way & try
class cl_abap_char_utilities definition load.
DATA : BEGIN OF enter,
x type c value cl_abap_char_utilities=>cr_lf,
END OF enter.
PS : I am not 100% sure about this.
a®

Header and Footer on Page '09

Hello all,
Is it possible to have, within the same document, header and footer that are different for each page?
If yes... how??
Thanks
Dan

Welcome to Apple Discussions
Yes, but how do you want them different? Right & left pages mirrored or completely different headers & footers on every page?
Right & left mirrored headers/footers can be done using the layout inspector > Section. Different headers & footers can be done by inserting section breaks & unchecking use previous headers & footers or using text boxes for the information.

Delete pages header and footer

icloud pages...how do I delete header and footer

Hello Gene,
welcome to the Pages Discussions. On which pages do you want to delete the headers/footers. Pages gives you the option to have different headers/footers on the first page then on the following pages of a section. That means you can have a header/footer on the first page but not on the following or vice versa. You can find the settings in the layout inspector under the tab button "section". There you can set "The first page is different" and "Use previous header and footer". Like the placement of this options tells, this settings are for sections.
But if you want to have different headers/footers in the middle of a section, you have to cover them like Magnus posted before. Or like John posted to insert new section breaks, but that breaks the text flow, too.
Frank.

Hide footer in List View web part

I've created a custom content type for a custom list (News stories.) I can add the custom list to my page as a list view web part and display only the latest article, but it also displays "1-1" at the bottom of the web part. I'm able to cycle through
the news stories by hitting "1-1" (changes to "2-2", etc...), but I'd like to have the option of taking it out completely.

Found how to remove header as well.
<br><style><br
/> tr.ms-viewheadertr {<br /> display:
none<br
/> }<br /></style><br>

Last Page Header and Footer in XML Report

Hi
I have one requirement , where except last page for an invoice, all other pages should have one header.
Last page should have nothing header and in Body some information(Total details) should be displayed and in footer terms and conditions should be displayed.
if one page is there for invoice , in second page (total details) and terms and conditions should be displayed.
Any one who already faced this issue please suggest how can proceed for requirements
Advance thank you

I need a large footer to appear at the bottom of the last page
I have made a section break: new page
I have created a field with the contents <?start@last-page-first:body?><?end body?>
I have run the report to create an RTF file and the last page footer appears on all the pages
But if I run it to PDF the footer does the right thing and only appears on the last page
If I create a Powerpoint document it works OK
It only fails in the format that I require, RTF?
Any ideas how to fix this?
Cheers
Shaky

Need to remove the header and footer regions on one page

Hi,
I have a requirement to remove the header and footer regions on one page only. The regions I'm referring to contain the following:
Header:
Company logo, Home link, Logout link, Preferences link
Footer:
Copyright info, Privacy Statement, Home link, Logout link, Preferences link
These are the standard Oracle header and footer regions/page items, so I am not specifying a particular page name, although it would be the create time cards page we want to modify.
Also, we only want to remove these regions/items from ONE page, not an entire responsibility.
Any help is greatly appreciated.
Thanks!
Suzanne

Hi,
In order to hide,
Home link, Logout link, Preferences link
Use this code in the processrequest of the controller on the page on which you want tohide these
OAPageLayoutBean page = pageContext.getPageLayoutBean();
page.prepareForRendering(pageContext);
page.setGlobalButtons((oracle.cabo.ui.UINode)null);
And for hiding the Copyright info, Privacy Statement:
Click on Personalise page link
then Click on Choose Context
Choose "OAFooter" as Scope
and click "Apply"
and then Personalise the Copyright and Privay Statememnt icon and set rendered as False.
Thanks,
Gaurav
Edited by: Gauravv on Aug 25, 2009 8:36 PM

How to Suppress Header and footer.

Hi,
I have master-Detail report. Report prints One master and all detail records on a page. If detail records are more than to fit on one page, report prints master gaian on next page followed by detail records. For a master record If there are no detail records, I supress the master record also using format trigger.
My problem is how to suppress the Header & Footer information that has to be printed on each page otherwise. When I suppress printing of master, All I get is Page header and footer. This happens only to the master records that fall in between. The pages related to last master records are not printed.
How can I suppress printing of header and footer on blank pages.
Thanks

Thanks Santa & Rohit,
As santa has suggested, I am already suppressing the printing of master record and its column headings based on the count of number of deatil records. If count of detail records = 0, I am suppressing master record.
The problem is with Report header (TITLE etc.) and footer. I have to print TITLE and FOOTER on each an very page. So I have put these into Margins. The Count of master records at the report level, can be used to suppress the master records column headings and also TITLE and FOOTER. So if there is no master records, report does not print anything and that is fine.
Problem comes when there are some master records with "No" detail records. Something like:
-M1
----D1
----D2
----Dn
-M2
----D1
----D2
----Dn
M3
M4
M5
----D1
----D2
----Dn
M6
M7
M8
My report now produces pages for M1, M2 and blank data area (with Title and Footer) for M3, M4 and the M5. It suppresses pages for M6, M7, M8 etc. So if a master record has no detail records, but happens to be the last records that suppresses the TITLE and footer also.
Any Ideas how to suppress TITLE/FOOTER for M3 & M4.
Thanks

External List: List View Web Part query never returns

I am experiencing an usual issue in our development SharePoint 2013 environment. I have been troubleshooting it for a couple hours, so thought it is time to post a message here.
I have created a number of external content types and lists on our site. I have validated that the lists display the expected data.
However, when I add a page to our site, and add a list view web part to the page, and point the list view web part at the external list, I get unexpected behavior. While I am editing the page, the web part displays the expected data. However, after
I publish the page, when you browse to the page, all you get is the rotating green arrow gif image, and no data. It displays the image forever. If you then attempt to edit the page, in the editor, you can then see the expected data.
Any thoughts on what might be causing this issue? I have tried switching out web parts, both to the Business Data List and the Content Query web part. The Content Query web part throws an exception if you attempt to point it at any of the external lists,
which after some reading I discovered that this is a known issue with that web part.
The Business Data list web part shows the expected data, but I have been unable to get paging/grouping working with that web part yet.
Greg Pierson

I have recreated this issue on a clean site collection. I have also discovered this issue only occurs with publishing pages, not site pages. next step is to try to reproduce it on another share point 2013 install.
Greg Pierson

Header and Footer in not displaying correctly on each page in Adobe Forms

Hi experts,
   I need your little help on Adobe Form. I have develop a customer account statement and facing problem.
     In header and footer part I have to display customer address. It is ok if data is of one page. But when data is overflowing, customer address is showing only at first page in header, and not displaying address neither in header nor in footer(footer section will print on last page, it may be either first page or third page ) on other pages. (Address is table type data )
       Header and footer Section address has been designed on Master Page.
Please help me to resolve these two problems as soon as possible.
Regards
Piyush

I found this post which I hope helps:
This can be done by bit of tweaking using JavaScript.
Actually the problem was, the header was printing continuously in subsequent pages and once the header data was over the rest of the pages contained blank header. But we need have to print same header for each group of items till that group of items finish in the specific page. And for new group of items different header will be filled and so on.
So to overcome this issue, create the item table in such a way that the header data is also included in the item table for each group of items. In the layout, select your header field and the event READY LAYOUT and write the below JavaScript code. This event is called for each page for that header field, so you can directly map the item table value and put it in your header field.
// Get the current page
var currpage = xfa.layout.page(this);
// variable to store number of fields in that page.
var fields = 0;
// Get the number of fields
        fields = xfa.layout.pageContent(currpage-1, "field", 0);
// Loop on each field on the page
        for ( i=0; i<= fields.length-1; i++ )
// Check if the field is in the item table column (it will be actually header data column in your item table)
            if ( fields.item(i).name == "TL" )
// Fetch that value and store in your header field.
                       this.rawValue = fields.item(i).rawValue;

How to Add Header and Footer to appear on every page

Hi,
I am using Robo Help 7 for generating Help pages. I have to import a wrod document an publish it as online web help html document. I have query as to how added header and footer be configured to reflect on each and every page. I am using Robohelp for first time and tried various options, but am unable to get the above done.
Thanks,
Pallavi

Hi there
Display your Topic List pod. Press Ctrl+A to select all the topics. Then right-click the selection and choose Properties. From the Properties dialog click the General tab. There you may choose the Template/Master Page. When you click OK all the topics should now be associated with the Template/Master Page.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to change the header and footer in the Section Breaks Next Page using OpenXML?

I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.

Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Remove header and footer from blank left-hand pages

Are there any scripts to automatically remove header and footer on a blank left-hand page for an InDesign CS3 document? I have a book with many chapters and it would be more efficient than removing them by hand.

It's a one liner from a much longer script that does quite something else -- this is merely a side effect, a quick way to get a page range (i.e., I need the range "251-256" to appear on my first page, excluding an optional blank last one) [*].
Perhaps I could write a full script, but for that I need a bit more information. Is your document an InDesign Book, with each chapter in a separate document? If so, any empty frame on a last leftmost page can safely be deleted. If your book is in a *single* InDesign document, this line can only be used if a left hand page has *no objects at all* -- not even an empty frame. That's the easy case -- in English "if there are no objects on the page, apply the "[None]" master. If there *is* a frame, however, it cannot be removed right away, even if it seems empty. That's because in that case you probably have inserted a page break somewhere on the previous page, and if the frame is deleted, tht page break will push off the text on the *next* page (the right hand). It also depends on what kind of page break -- as a character or as a paragraph Keep Option; Next Page, Next Frame, Next Odd Page, Next Column. Way too complicated to script right off the bat.
All in all, applying that empty master maually is much easier :-)
[*] Sure, I know how to use the Next Page Number trick. However, I also need the range in my XML output, and the Page Number markers do not play nice when written out in ASCII.

Master Page Header and Footer in Page Viewer Web Part

Similar Messages

Maybe you are looking for