Master page is shown in the document

Hello There.
I have a document with one empty page (first page). I am not able to delete this page.
I allready fade in the command structure (Hierarchie). By clicking on this empty page the master page is activated.
Is it possible to hide the master page (out of the structure) or is there any other possibility?
Thank you very much!
silvia

Silvia - I selected the form (that was on the second page) and click on Palettes - object - select subform tab. changed content dropdown menu from Flowed to Positioned and click on check box (allow page breaks within content).
that actually get rid of blank master page showing up as actual form.
Sarah

Similar Messages

  • Custom master page is showing inside the dashboard designer

    I have some issues with Dashboard designer, when i am creating a new report ,my custom master page is showing inside the designer. How i can remove this?
    the same issues of this post ->
    http://sharepoint.stackexchange.com/questions/109218/custom-master-page-is-showing-inside-the-dashboard-designer-pps
    Thanks

    But here's a few more things:
    When I click on the page 1, the Master Page view is shown.  When I click on Master Pages, the Master Page view is shown, also when I click on
    untitled Content Area, the Master Page view is shown.  All these made me think that extra page is the Master Page.
    When I look at pagination for page1, here's what there:
    When I click on the (untitledSubform) (page1) pagination, here's what's there
    I can't get this page to go away. Thanks.

  • How to find out if the "Services" page is shown on the phone?

    Hello! I have a application that pushes a page(which is actually a picture) to the user's Cisco phone, at certain time, I'll need to remove that page from the screen. To push a "Key:Services" works, but only when the page is currently displayed. If the page is pushed back, or if the page has already been removed (by user select a "Clear" soft button), then pushing "Key:Services" from server will cause strange and inconsistent behavior. Bascially I'll need to know if the "Services" page is shown on the phone screen, probably by visiting the phone's web server somewhere(just don't know where).
    I managed to get around a problem like this a while back but not that lucky this time... Any ideas? Thank you very much for your help!

    alright, this is the url I had in mind: http:/IP_PHONE_ADDRESS/CGI/ModelInfo
    See http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=IP%20Communications%20and%20Video&topic=IP%20Phone%20Services%20for%20Developers&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddb6101 for a discussion.

  • When I open the Page Thumbnails panel, all the document's thumbnails are blank.  How do I restore the ability to see page material in Page Thumbnails?

    When I open the Page Thumbnails panel, all the document's thumbnails are blank.  How do I restore the ability to see page material in Page Thumbnails?

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • My master pages have disappeared from the View menu in Frame Maker and I can't get to them. View does show body pages and reference pages.

    Master pages went missing from my FrameMaker 12 setup about 4 days ago. I can see body and references pages. I have tried reinstalling. The master pages are missing from all of my FrameMaker documents, absolutely all of them. I have done two new installations of FM 12, no fix.

    Does the old shortcut still work? [Esc, v, M plus its close kin Esc, v, R for Reference pages and Esc, v, B for Body pages – all case-sensitive]
    Also, does "missing" mean you select View master pages and get a blank screen? while double-checking the view shortcuts, I discovered this can be replicated by turning off borders [Esc, v, b] in Master page view … if you happen to be using a Master page layout with no header or footer. But I have also, occasionally, ended up with blank master pages even when they should have had content. It's a mystery.

  • When I try to open any kind of links, the page first shows me "the document has moved" and then goes on to some advertisement page.

    When I follow any kind of links or try to open something in another window or new tab, the browser first shows the white page with text "the document has moved", and then moves to advertisement page of some sort. Usually in the small box where the page description is it says "Jump". I don't know how to disable it, it is really irritating.

    Sounds like Malware.
    Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
    Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]
    If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
    [http://www.spywarewarrior.com/index.php] <br />
    [http://forum.aumha.org/] <br />
    [http://www.spywareinfoforum.com/] <br />
    [http://bleepingcomputer.com]

  • When viewing documents on a Web Server, IE automatically opens a blank page and then opens the document in the default program. The blank screen should close automatically but isn't happening.

    So here is the situation, my company uses a third party scanning software, that puts documents scanned or created onto a webserver. We use a program that grants a user access to view the documents on the webserver. The user will have to log into the system
    using credentials, we have Kerberos doing this. Once the user is logged onto the system they navigate to the document they want to view or edit. So the user wants to view a .pdf file, they click the document they want, and it is supposed to open in the default
    program associated with file extension. ie: .doc would open Word, .xls would open Excel. When the document is loading in the default program Internet Explorer opens a blank page, this page is supposed to prompt the user if they want to open or save the document.
    (I changed the registry to have the files selected to automatically open without this prompt.) The blank screen generated is still staying open, this screen is supposed to close automatically after the prompt or close automatically after the document is opened.
    So when a user is looking at several documents, this floods the screen with all these blank Internet Explorer pages. This problem is only occurring for users that have Windows 7 PC's, XP users do not have this problem at all. My PC is the only one in the company
    that is Windows 7 64-bit, and working properly with the IE blank page automatically closing. I'm wondering what can be done to fix this problem, is it as simple as registering some .dll files or do I need to make a registry change? Any help would greatly be
    appreciated.

    What is the registry change exactly?  Sounds like one which is supposed to avoid the prompt.  I know
    that there used to be such a thing, before the new prompt and I know that some users think that there should be such a thing for any program but I'm not sure if that expectation is valid or not.  I think this may also be related to a concurrent change
    in the OS.  E.g. in XP we had File Types Options editor but starting in Vista that was removed.  You might get some more clues on this tack from NirSoft's FileTypesMan utility.
    The registry change that I did was to remove the open and save prompt. I will be sure to look into that. Our company
    isn't worried about the user's automatically opening the files since they are all trusted. They also do not have the ability to install anything, so if they were to download a potentially harmful file they could never install it. We monitor downloads as well,
    if they download files off the internet that aren't work related we remove their download capabilities.
    Sounds like a scenario for using ProcMon to take two traces and compare them for their essential differences.
    I talked to my boss about using this tool and he is worried about using it. I'm only an intern at my office and do not have the authority to use a program without their knowledge or consent. I will run the idea by them again and see if it's okay I use this.
    I'll maybe make some presentation about how it can help us with our problem and how much time and money it will save. Because I really want to get down to the bottom of this.
    Probably the most significant thing is going to be the Content-type that the files are being served by. 
    You could use the Developer Tools, Network Capture to check on that and ProcMon could help explain what happens after that.  A related workaround to change the symptom when the Content-type is not what is expected is to disable MIME Sniffing (e.g. in
    Security options, Miscellaneous section).  In fact, perhaps that could explain your machine's difference with anyone else?  MIME Sniffing is a default, previously known as "save according to type not extension" (or some such wording).
    Okay I will be completely honest I have no idea how to use Developer Tools (F12), yes I could google it, when I tried using it on the blank pages it would never work, I also have no idea what I'm looking at. I should mention that I do not have access to
    the web server. Our programming and development side only has access to our AS400, which is where the web server is located. I do have MIME Sniffing enabled and so does everyone else. I may be wrong but, I believe it is needed in order to open the file extension
    in the correct default program, yes? I thought MIME Sniffing would see a .docx file and then find the appropriate program to open that .docx file in. I may be wrong but I know it's used somehow along these lines.

  • Pages returning error message "The document (name) couldn't be opened"

    Okay so here is my problem: I made a document in Pages the other day (a list of books I own) and after spending an hour or so on it I saved, closed Pages and went and did something else. The next day I came to open it again to add something and Pages came up with this message "The document (document naem) couldn't be opedned". That it, nothing else, no reason why or anything. I tried again and again, the same thing happednd. I tried to open it with Text Edit and got this error: "The document (document name) could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format."
    Okay so something is wrong. The weird thing is I can quick look it, I can open it in Preview fine.
    So after trying everything I could think of I decided a few days later to just remake the document, I had all the information there so it was a bit easier this time. I started afresh. I frequently saved, quited and re opened just to make sure everything was okay, after a while I stopped doing this as it seemed everything was okay. I finished, saved and then tried to reopen it to make sure it was fine. It wouldn't open and returned the same error as before!!!
    This is utterly preplexing and extremely frustrating. I have no idea what might be causing this. If anyone can offer some help that would be great.
    Thanks in advance :-)

    Where are you saving the files to?
    Peter

  • Index generation pushing master page first to end of document

    Hi.
    I've created templates in Frame 10 for a book that include TOC, index, and chapters. When I generate my book, the index generates, but it pushes my master page with the header to the end of the index instead of starting the index on the first master page. Does that make sense? Is there a tweak I can do or a step I left out that will keep the first master page at the front of the index?
    Thanks.

    FWIW, I've grown accustomed to having to apply a First page manually in various situations; most often when I split a file into two, but also (I think) at least the first time I generate a ToC or LoF page. Completely off the top of my head, do you have any non-generated content (such as a title "Index") at the start of your generated index? considering the behaviour I'm used to from my ToC, this might be enough to "fix" your master page choice.

  • How can you get get two master pages to repeat in a document with one of them having numbering.

    How can you get two master pages in Indesign to repeat when one of them has a numbering section and the back side is a common back. For example, Master A has numbering 001-500 and Master B is the common back for all 500 pages.

    My guess is you either want to use a numbered list for the numbering, rather than a page number marker, or you want to make two files and print a single page file with the static text 500 times, then flip the stack and print the 500 page file.
    What are you trying to do?

  • Using Custom css in master page but it changing the alignment when some user log in

    Hi all,
    I created a custom css and i applied on master page,this css is good for admin log in,but other group users are loges in,  css is  changing in Alignment of Pictures how to solve this issue ,  I given the permission for the style library where
    i placed the images and css file 

    hi,
    This usually happens to me when the CSS file is not published or approved yet. Where is your new CSS located? Have a look
    with SharePoint Designer or browse to it and publish/approve it.
    use refrence from below links
    http://sharepoint.stackexchange.com/questions/53565/css-and-js-files-work-for-admin-but-not-for-members-and-visitors-sp-2013
    http://sharepoint.stackexchange.com/questions/20558/sharepoint-2010-branding-i-see-it-as-site-admin-but-rest-users-dont
    Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

  • Will Pages allow me to insert page numbers later in the document?

    I want to add the page number in my document and send electronically. But, I want page numbering to begin on the third page. When I add the page insert function, it doesn't (?) allow me to reset the page number. Certainly there is a way, please help.

    Hi EC3MKTG,
    Page numbers can begin at 1 in any Section.
    Menu > Insert > Section Break after the end of the second page. Then click in that Section and
    Inspector > Layout > Section > Page Numbers > Start at > enter 1
    Inspector is your friend.
    It may help if you go to Menu > View > Show Invisibles to see the formatting characters such as Section Breaks (blue horizonal lines), paragraph marks, spaces, tabs...
    If you have inserted any Page Breaks, it may help to delete them and let Section Breaks control the pagination.
    Regards,
    Ian.

  • How do you highlight text in Pages for iPad? The document I want to create and highlight is a pages document

    I am trying to create a document in Pages for iPad and want to highlight various bits of text but can not find a function in the inspector for this. Can anyone help,please?

    Hi stuartdj,
    I'm not finding a way to highlight text as one can do with iBooks (hold and swipe for black text, background yellow for example).
    One option is to actually color the text itself.
    Select the text, then in Style tools, tap the Font name at the top which shows the Text Options sheet where there is a Color option.  Would changing the font color to Red, Green or Purple accomplish your goals?
    If you do want black text on a colored background (highlighted) it would need to be text in a text box where you can change the fill (background) color.  Style, Style Options, Fill.  But this is not inline text and doesn't flow like just coloring the font itself.
    ivan

  • Preflight settings work at the page level but not the document level?

    Greetings all,
    Just wondering if anyone has run into this: I'm running Acrobat 10.1.3 on Lion and I've been struggling with getting my preflight settings to work. I can get a simple fixup (convert all to grayscale, for example) to work on a page or two extracted from a large document (800 pages), but I can't get the same fixup to successfully fix the whole document.
    I've tried this on several different large documents with the same results. And yes, I did try all the usual stuff...quitting, restarting, rebooting, different docs, different fixups, duplicated a known working fixup...
    I'm at my wit's end with it. Any ideas?
    Best,
    Dave

    Do your settings work on small or medium size documents? Such as, instead of 800pgs, how about a 2 page file, a 4 page file, a 16 page file? In order to diagnose, you have to start a systematized test procedure to see where it fails. FWIW, I don't use that feature, but is Preflight even supposed to work on whole documents, not just the current page?

  • I have a Macbook pro thats prints fine to my HP printer, but when I try and print from my iMac it doesnt see the pages and just prints two blank pages. Even thou the document is a number of pages

    I have a HP Officejet Pro 8500A and I had no problems printing to it from my Mac or Macbook pro. The macbook is wifi and the Mac is cable, I have recently had the printer replaced with an exact model. Since doing that I can only print from the macbook pro, when I try and print from teh mac it doesnt see the pages. It could be a 10 page document and it will just show two blank pages. I have googled the question and have tried deleating the printer and reinstalling without any luck. When I got the new printer I insalled all the latest drivers thats the only thing different.
    Could you please help
    Michelle

    Right click the printer in System Prefences -  Print & Scan and use Reset Printing System... and then reinstall the printer, should take less than 5 minutes. Here is a photo showing how to Reset Printing System....

Maybe you are looking for