Master page using two different number counts

I'm working on a book for teachers and have the students book side by side with the teacher advice page. I want the page numbers of the students book to match the students workbook. Is there a way to set this up?

Hi Harkirat,
Yes it is possible to achieve what you want and that is where correlation comes into picture.
You need to promote both the fields in pro;perty schema but tied to common name. Have look at following article , which should clear all your doubts : https://social.technet.microsoft.com/wiki/contents/articles/13729.walkthrough-correlations-in-biztalk-orchestration.aspx
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

Similar Messages

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

Using Two different drivers simultaneously

I want to use two different type 4 drivers i.e. one driver of ms-access and one of ms-sql server 7 simultanoeously in one java program.please tell me how can i do this ?

i need to load two drivers for my java program. i need to connect to oracle database and count the no of rows and then connect to sql database and count number of rows.print them on command prompt.
can someone simplify this code??
package connectDatabase;
* @author
import java.sql.*;
public class ConnectTo
     public void OracleDB()
          Connection dbconn;
          try {
            DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
            String connString="jdbc:oracle:thin:@SYS_IP:1521:oracl";
            dbconn = DriverManager.getConnection(connString, "uname","pwd" );
        catch(SQLException sqlex)
             sqlex.printStackTrace();
        catch(Exception excp)
            excp.printStackTrace();
     public void SqlDB()
          Connection conn;
          try {
            Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
            String url = "jdbc:odbc:connectDB";
            conn = DriverManager.getConnection(url,"uname","pwd");
          catch (Exception e)
            System.err.println("An Exception occured! " +e.getMessage());
}

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

How do I use a different number for imessages than the one for my phone?

I use two different phone numbers. My main number is not the one associated with my iphone. I want imessages to be sent from my primary number, not the one assigned by default by my phone. I see in settings where I can add another email address, but not where I can add another phone number. How can I change the default number to the one I actually want people to use?

You can't add another phone number.

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

Report that uses two different queries

I need to make a Report that uses two different queries. It would do one query, then the second, putting the results one after the other on the page.
Using the wizard, I put in the first query, and it will generate output from this first query.
I am able to put the second query in the Report, but when I try to use something from the second query, it gives a message about accessing a field below its frequency.
In the Reports forum, there is a reference to
tons of samples available in
builing reports doc 1. http://download.oracle.com/otn/other/general/B10310_01.pdf
But the link is broken.
What can you tell me?
Thanks, Wayne

What you're trying to accomplish is possible. Now that you've got the second query, add a new repeating frame in the layout editor below the first area. Open the property palette for the new repeating frame and set the source to the second query. Then add fields from the second query.
Also, remove the fields you have for the second query from the first frame that was created by the wizard; that's what's causing the error about accessing a field below its frequency.

How to maintain two different number ranges in OM for positions?

I have a requirement where i want to create two different number ranges for Positions in OM. Please also explain me the process ?
Edited by: priyeshosi on Feb 22, 2010 3:46 PM

yes the enhancement for this transaction code is RHIV0001 & the user exits are as follows :
1. EXIT_SAPLRHIN_001              Customer exit: Check number ranges for integration.
2. EXIT_SAPLRHIV_001              Customer exit: Internal number assignment
3. EXIT_SAPLRHIV_002              Customer exit: Check external numbers
4. EXIT_SAPLRHIV_003              Customer exit: Check whether internal number assignment
which one to use from the above four & in what order

Use two different printer services in one web template?

Hi!
Is it possible to use two different help services for printing in the same web template (for the same table item)?
Print1:
<param name="HELP_SERVICE" value="HELP_SERVICE_PRINT"/>
<param name="HELP_SERVICE_CLASS" value="ZCL_RSR_XLS_HELP_WINDOW_PRINT"/>
Print 2:
<param name="HELP_SERVICE" value="ZPRINTING"/>
<param name="HELP_SERVICE_CLASS" value="ZBW_PRINT_HELP_SERVICE"/>
I was thinking that you maybe could change the param name values for the "Help_service" and the "help_service_class" at runtime using the properties for the table item, so that you could choose which one to use, but I havne't been able to do that so far.
Does anyone have an idea?

This is not a problem. Just put the print service for the print to excel on an object other than the table web item. As long as these print services exist on any web item, you should be able to invoke them. I've tested this with putting the "Print with Excel" service on the Navigation Block Web Item and the other print service on the table web item. Hope that helps!
Prakash

SBO - How to use two different Stock Account within the same Item Group

Hi,
I'm currently stuck within one of my implementation.
I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
Do you have any clue so i can please them and keep using at the same time the item group ?
Thanking you in advance
Stephane

Hi,
In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
As such, we can, somehow handle two different chart of accounts.
In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
1 - Duplicate the HQ accounts
In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
Regards
Stephane

Can you use two different apple ID's on one Ipad?

I would like to use two different apple id's on one IPAD. One apple ID is for work and the other is for personal use.

Read this.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
 Cheers, Tom

How to link the same horizontal page for two different vertical pages without duplicate them?

Hey guys,
Is there a way to link the same horizontal page on two different vertical pages without duplicate the horizontal page?
I have a doublepage of a book splitted in two parts in different vertical pages but i want link the fullsized image in the horizontal page for both of them. Got that? hahaha
Thank you all

Confusing But interesing.
I think it's possible. I have a idea. It will need one advanced trick.
To explain it, I need test simply haha.

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Can I use two different itune accounts on one computer?

Can I use two different itune accounts on one computer?

1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
(125941)

Master page using two different number counts

Similar Messages

Maybe you are looking for