Master Recipe by LSMW

Hello gurus,
Is it possible to use the LSMW for Master Recipe (TCODE c201) data migration? If so, is there a document or a web site which can guide me? Please help

Hi,
Unfortunately, i could not found any LSMW for master recipes.
What I have done past is in LSMW create a screen recording of C201 and use the LSMW structure to do the rest (the mapping, conversions, etc). This work very well. It may take a few recordings to get all the data loaded (one for the operation/phases, one for the material assignment, etc) but it will work.
Or you can try with BDC For master recipe both in creation and change mode.
hope you will find this useful !!
Pradeep

Similar Messages

  • In LSMW which method is exactly suits for Master Recipe Creation (TC-C201)

    Hi All,
    I am unable to find which method suits for Master Recipe Creation in LSMW.
    Please send me in detail if any method suits.
    Can any body help me in this.
    Points will be awarded for correct answer which helps me come out of this problem.
    Regards,
    Shobha

    Hi shobha,
    if  there is code u have to do before uploading go for BDC or BAPI,
    it not go for LSMW (recording method) --> in this its very difficult to code.
    Thanks

  • LSMW FOR MASTER RECIPE

    Hello
    Iu2019m working in lsmw master recipe "standard" by using object "0170" and method : batch input "0001"
    when i want to create the structure I don't find same zone like "PVZNR" "PHFLG"...
    Please note that i have master recipe contained more than 25 operations and 25 phase it's hard to created manually.
    is there an easy solution to load MR by lsmw.
    i will be thankful if you help me
    Foued

    HI Foeud,
      Please post your question here:
    ABAP Connectivity
    Best Regards,
    Ravi

  • Mass creation of BOM and Master Recipe for Plants

    My client wants to do Mass BOM creation and Mass Master Recipe Creation from a Generic BOM and Generic Master Recipe for all 10 Plants by just a click of button.
    He does not want to use copy function using CSO1 or C201, and do for plants 'one by one'. He finds it very time-consuming. He wants to copy for all ten plants all at once. Please advice how this can be accomplished in the best possible manner, and if by standard SAP.
    Thanks,
    Sac

    Dear Sir ,
    What is LSMW ?
    I want to Copy some bill of material from another plant .I had used T code CS01 for it but only the header bill of material is copied .
    The copy field in CS01 is only for first level boms the subsequent Boms are not copied .
    so is there any other way to do it ? if possible please give the detail procedure .
    Regards
    Pankaj .
    Edited by: pankaj.001 on Mar 9, 2011 10:55 AM

  • Deleting operations in master recipe of process orders

    Dear Guru's,
           I want to delete the operations in master recipe of process orders. The operation numbers are different in different process orders. This activity has to be performed on bit large number of process orders. Can anyone help me in providing the process for doing this activity in mass. Any suggestions?
    Thanks in advance.
    Regards
    Kalyan

    Dear Kalyan,
    Why do you want to delete the operations(basically phases)at process order level?
    If it's really required to execute the Shop floor activties and if the order numbers is huge in number means then in my
    understanding only a LSMW/BDC can help you,but technically I'm concerned about selecting the operation/phases for deletion
    by passing on the confirmation number or operation number for a particular process order.
    If it would be the latest operation/phase for a product means then make the changes in the master recipe so that the same is
    getting copied into the process orders in the future.
    Check and correct me if I'm wrong.
    Regards
    Mangalraj.S

  • Material Assignment in Master recipe

    Hi,
    Is there any FM/BAPI to assign material into a master recipe? Currently, we are using BDC to call C202 transaction for this purpose. This process takes long time for material assignment which leads to performance issue.
    Thanks in advance
    Senthil Kumar A

    In LSMW , object BUS1012 is offered for routing creation and change .
    Unfortunately there is no object for master recipe creation & change and there is no standard batch input, nor BAPI/IDOC, nor   direct input. You should create your own batch input or CATT.
    Here is a possible procedure:
    Please record a Batch-Input with transaction SHDB and try if this work. If not please try with TOFF as described in the notes.
    Read carefully SAP note 142022.

  • How to load Master Recipe into SAP

    Hi SAP gurus,
    Can somebody give some inputs on how to load Master recipe from legacy to SAP.
    Do I have to use LSMW or eCATT? If LSMW, can i use Routing Direct Input method or Do I have to use Recording.
    How will the source structure look like?
    What all fields I should maintain in these structures?
    How many data load files I should Maintain? What is there format?
    I would really appreciate if some can give step by step procedure for either LSMW or eCATT.
    Thanks in advance
    Kole

    We never store master data in InfoCube.
    refer How to Implement Flexible Master Data Staging:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412
    Edited by: sam hennry on Feb 23, 2008 3:18 PM

  • Master recipes operations not getting transfered in SNP PDS to APO from R3

    Hello APO Gurus,
    I am trying to transfer SNP PDS for master receipes from R3 to APO.
    Issue description::
    The operation is not getting transfered correctly , some system default operation "010 generated Operation (from Planned Delive)" is getting generated in APO, also activity and resource capacity is not getting transfered. This situation exist for one plant 1000, for other plant 1100 the SNP PDS created correctly.
    i have following points:
    1. Is there some customizing setting missing on R3 or APO side  for plant 1000 tbefore SNP PDS transfer
    2. What need to be checked on master recipes data in R3,
    i have checked on below points
    1. FG Materials and all the Component Material to be in APO in a Active Integration Model.
    2. BOM & Routing and Production Version setup correctly.
    3. The Routing Operations have to Relevant to 'SCHEDULING'.
    4. Try deleting the existing Integration model for materials & re-create new IM & activate.
    Please help me to send SNP PDS correctly to APO to take heuristic run.
    Regards
    Gajendra
    Edited by: Gajendra_APO on Aug 23, 2011 1:14 PM

    Hi,
    It is good that you have given your already checked points.
    Please check the following things also and try to retransfer the PDS.
    1. Check your resource in ECC, whether you have maintained the Process formula.
    2. Check you have maintained some values in Master Recipe for processing time
    3. Check whether the resource has been transferred for your plant 1000 to APO and an active IM exists.
    4. Also check the type of the resource transferred to APO. It should be a single-mixed/ multi-mixed or bucket resource.
    Hope this will help you to solve the issue.
    Regards,
    Manimaran M.

  • Master Recipe without material

    Dear PP Gurus,
    I have one query.
    I want to create master recipe without material, i have created the same.
    Now while creating process order it is giving error,
    BOM for material 500000010 does not contain any valid items
    Message no. CO636
    please guide
    thanks in advance
    kailash thakkar

    Hi Kailash,
    What is mean by
    I want to create master recipe without material, i have created the same.
    What's the reason behind it.
    Regarding error CO636,
    - Check your BOM of that 500000010 might be components are missing over here.
    or
    - might be From to To lot size of BOM is not match with your Process order qty.
    or
    - Also check Valid From to To Date of your BOM.
    Regards,
    Dhaval

  • Error While Uploading GL Master Data in LSMW

    Hello Experts,
    I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
    Your help would be highly appreciated.
    Regards
    Muhammad Yousuf Ali
    SAP FI Consultant

    Hi,
    first can you pls check your Hierarchy mode setting in FS00 -  before executing Batch input session -
    Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
    then Now Run fresh LSMW - your issue will resolve
    Mahesh

  • Error while changing the master recipe (C202)

    In transaction C202 (Material master recipe), I am trying to make a change but getting error message :Update was terminated.
    I am trying to change a  master recipe which contains an error. Recipe: A61234 transaction C202.
    Thanks.

    Hope, By this time you must have resolved this issue at your end. Due you know any root cause, If yes, could you please share it with us.

  • Do you know the idoc for master recipe?

    Hi all.
    Do you know the idoc for maintain master recipe?
    I am looking for the idoc.
    I would like to create, update and delete master recipe with idoc.
    I have investigated about idoc,but can't find suitable idoc.
    (I did find it for BOM, but for recipe is nothing.)
    Thank you in advance..
    Satoru

    Hello,
    As far as I can see there are no BAPI's or IDOC's available to upload Master Recipe data.
    A suggestion would be to use the batch input technique to upload the master recipe master data. You find the documentation of the batch input recorder etc. via the menu path System -> Services -> Batch input -> Recorder
    I hope it helps,
    Regards,
    Marcelo

  • Creation of Process Order without assigning master recipe

    Hi,
    I want to create a process order without having default master recipe for the given material or default operation for the given order type. I want the user to select the master recipe manually in process order. We do not want to use production version also.
    We can define the default operation for the order type (OPJG) so that we can create a process order. I do not want a default operation in the process order but the user should select a valid master recipe. If we have default operation in the process order, it serves no purpose as it is never used anywhere.
    Is there any way we can achieve this?
    Regards,

    Hi,
    Please find the required details and conditions for creating process orders without master recipe.
    http://help.sap.com/saphelp_47x200/helpdata/en/89/a42cb3461e11d182b50000e829fbfe/frameset.htm
    Regards
    Kannan

  • How to upload different views of customer master data using LSMW-IDOC

    I need to upload customer master data  using LSMW Idoc method for my client. Now customer will have different views like main view, Sales data, Company code data, Partner function data etc. And except main data all other data can be multiple for each customer. We are going to upload data from tab delimited .TXT file. Should I propose different LSMW for upload different views for the customer from different .TXT files? or we can upload all the customer related data (like main view data and partner function data )from a single .TXT file. Kindly suggest which one in convenient and how we can prepare the data file in both cases.

    convinient is the method that you can handle.
    but as the guy who loads the data you have to load the data like they are available, like it is convinient for others to prepare the data.
    In general there is no problem to use an IDOC method to load a customer master with multiple comany codes and several sales orgs in one shot.
    the data can be in one source file, but need then to be maintained in a certain way
    Example1: all data in 1 structure
    GD1 - CC1 - SO1
    GD1 - CC2 - SO2
    GD1 - CC2 - SO3
    in this case the GD (general data) is redundand in each line which has different Company code data or different Sales Org data
    Example2: all data in 3 sturcures but one file
    GD1
    .CC1
    .CC2
    ..SO1
    ..SO2
    ..SO3
    Example3: data delivered in 3 files - you join the files in LSMW, they must have a common identifier like the old customer number in the beginning of each file
    FILE General data:
    GD1
    GD2
    GD3
    file Compamy code data:
    CC1
    CC2
    CC3
    file Sales org data:
    SO1
    SO2
    SO3
    LSMW is flexible and can handle each of this scenarios, are you flexible too?

  • Master recipe Batch-input / Bapi / Fct

    Hi,
    Does anybody have a program to insert data for master recipe ?
    I didn't understand how to use fct MRTRS300_MASTER_RECIPE_SAVE and the Batch-input on C201 have oss note ...
    Rgd
    Frédéric

    Frédéric,
    I tackle the same question, I will let you know when I find something. Please post your findings here as well.
    Regards,
    Serge

Maybe you are looking for