Master Report on persons in R12
Hi All,
I am working in R12 implementation project. I need to kno, is there any responsibility , standard report available for following reuiqrement:
# Master Report to print the required details like
1) Person Details
2) Addresses
3)Phones
4)Salary
Kindly reple me for above requirement. Your help will be greatly appreciated.
Regards,
Basaw
Hi All,
I need the report which can give personnel details, address, contacts and salary information for all the employees.
I found the report like Worker Summry Report and Full Person Details Report which give the information for single employee by passing parameters like Effective date and Employee name.
But i need to know the report which gives me the information for all employees in the oraganization or organization hierarchy.
Kindly reply me for the same
Thank You
Basaw
Similar Messages
-
Discoverer report with PO_RELEASES in R12
Hi all,
I'm migrating a Discoverer report from 11i to R12. The query of the folder uses the po_releases and this join condition "and rcv_transactions.po_release_id = po_releases.po_release_id(+)". When I run the report I get the error "invalid number" but when I tried the same query but using the po_releases_all it seems to work. Is this ok? I saw that in R12 po_releases is just a synonym, is this correct? I would appreciate your comments.
Thanks in advance.
GabrielaThanks Hussein. Yes, I've checked the document you recomend, but the problem seems to be when I try to use po_releases, the synomy) and I don't know why it work with the _all table but not work with the synonym.
-
Dynamically select detail report for a master report link item or button?
I'm still new to APEX, so apologies if this sounds like a stupid question, but so far I can't find anything online about how to do the following.
I have a simple report, and I want to be able to drill down from here to a detail report via a link item (or a button) in each row. The problem is that the specific detail report to use depends on a combination of values in the parent record.
So if I have a parent record in the master report with values for columns 1/2/3 of A/B/C, I would drill down to a detail report against table X. If my parent record has values of D/E/F, I might drill down to a different detail report against table Y.
I can build the individual reports easily enough, and I can set up a link item in the master report to drill down to a hard-coded detail report page. I can even generate the name (alias) of the relevant target report as an extra non-DB item in each row of the parent report. But I can't figure out how to allow each row in the parent report to actually link to a different detail report dynamically, depending on the contents of the parent row.
Can anybody suggest an easy way to do this, or point me towards an online resource that would explain how to do this (preferably in basic terms that this APEX-newbie can understand)?
Thanks for your help!Hi,
When you say "Detail report" do you just mean a normal report of the child records for the selected master record or a tabular form style "Details report"?
Using different reports on a page would, typically, depend on the value in a hidden page item - for example, P1_REPORT_TYPE. Your link could pass an appropriate value into this item and the second page would then use this as a Condition for each of the report regions - each region being conditionally displayed when the hidden item is a specific value.
Andy -
Passing the values from subreport to master report in JasperReports
Hi All,
I want to pass the values from subreport to master report, but my subreport is without any query.
Please help me in this regard. its urgent.
Thanks & Regards
KrisHi,
Below link may help you
http://jasperreports.sourceforge.net/tips.tricks.html#returnvalues
regards
MJ -
How to call a detail report from a master report in 11g?
How to call a detail report from a amster report in 11g?
We have a requirement to call a detail report based on the invoice id that will parsed from the master report in OBIEE 11g. Any ideas sugegstions will be greatly appreciated.
Thanks,
Edited by: user8957415 on Jul 31, 2012 9:04 AMCheck these links
http://gerardnico.com/wiki/dat/obiee/master_detail
http://prasadmadhasi.com/2011/11/13/master-detail-event-in-obiee-11g-and-pass-multiple-events-to-one-detail-report/
Hope these helps -
Vendor Master report with address, telephone number & email ID
Dear All,
Kindly provide to me T Code for Vendor master report along with vendor address,Telephone number & email ID.
KrajeshHi Rajesh .... in case customer require specific information, you can also try using sap queries (trust me it is not as difficult as it sounds but the results are just great ;-):
queries
Table SZA1_D0100 have the following fields
SMTP_ADDR (E-mail Address) ; TEL_NUMBER ; MOB_NUMBER ; FAX_NUMBER
For address check table ADDR1_DATA
Common join should be Vendor among these 2 tables
Hope this helps !!!
Edited by: m_n_novice on Aug 7, 2009 11:08 AM -
Customer Master Report needed for jurisdiction, tax code, and district
I am trying to pull a customer master report and need to include the following fields:
Name (NAME1)
Account (KUNNR)
Jurisdiction ( TAXJURCODE)
Tax Code (TAXKD)
District, which is County for US addresses (CITY2)
I haven't seen a report with CITY2 and have tried S_ALR_87012180 or opening KNA1, KNVI, etc.
Any ideas?
Thanks,
MichelleNo there is not such report or transaction.
You may look at tables KNA1 + ADRC.
In table KNA1 there are fields ORT01, ORT02, COUNC and CITYC that could help
Otherwise you must link KNA1 and ADRC with field KNA1-ADRNR = ADRC-ADDRNUMBER
Sorry
BR
Alain -
Customer master report and printing
hi
pls advice any customer master report and how to print the record. thanksHi,
Have you tried with Report: MCTA?
You may add more key figures by F6.
Also, you may check report: FBL5N
You may change Layout by Ctrl+F8.
Hope this may help you.
Best Regards,
Amit -
How can we pass the master report value in to detail report
Hi All,
My question is how can I pass the master report value in to detail (Child) report filter?
I mean I have one master report if I click on employee name then I have to pass the employee id in to details report filter. Then detail report will display data for that particular employee.
How can I achieve this one in OBIEE?
Please help me to resolve this issue. Thanks in advance for your time and support.In that case, you should look at using Go Url. In your column formula for the employee name, create a hyperlink to the detail report and pass the employee id.
Take a look at this post: Re: Dyanmic display of the Image Link URL
Thanks! -
Master Report problem with PL/SQL
Hi Intelligent ones :)
Can anyone help?
I am trying to generate a Master report by generating a report based on a SQL query. The SQL query generates the detail of the report and the Main part of the report is generated using PL/SQL in "after displaying the header". See my PL/SQL below:
DECLARE
v_cloneid Clone.CloneID%TYPE;
BEGIN
htp.p('1: v_cloneid is:');
htp.p(v_cloneid);
SELECT Clone.CloneID
INTO v_cloneid
FROM ClonesDB.Clone;
htp.p(v_cloneid);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
htp.p('No data Error');
WHEN OTHERS
THEN
htp.p('Error Detected');
htp.p('Exception: v_cloneid is:');
htp.p(v_cloneid);
END;
Every time I try to run my report an exception (When others) is generated. In my attempt to debugg my code I have discovered that the correct value is read into the v_cloneid variable. I can print this out within the exception but not before this!!
Also to generate a report for each cloneID entry I assume I will need to use a loop?
Please help...I'm just learning!!
Kirsteen
nullI think you should post it -
Forms
Regards.
Satyaki De. -
How to deployed jsp report to Oracle EBS R12
Hi,
The jsp report deploy using Oracle Report. How to deploy the jsp report to Oracle EBS R12 and calling jsp report through Self-Service Menu.
Thank you.
WilsonHi,
What tool you have used to develop those pages?
Please see the docs referenced in this thread.
I want to start OAF R12 please give me PDF
I want to start OAF R12 please give me PDF
Thanks,
Hussein -
Opening child report through master report using hyperlink
HI Experts,
I have a requirement where, I need to create a child report which will open through a master report using hyperlink.
I have to use BIP desktop (MS word) and need to create a RTF template using XML file.
Can you please guide me, how I can achieve this?
Regards,
Suhasini
Edited by: 942451 on Jun 28, 2012 9:48 PMTake a look at this blog post: http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html
Thanks,
Bipuser -
How can i create Standard master Report with Client standards .
HI Gurus,
We are creating somany reports. for each time we have to redesign same work.. My client has some standards every report should looks same. I mean Logo, Client Name, Color of the bar, font size, Style, Format, back ground color etc......
Is there any way we can create one master report with all my client standards. Then developers no need to do same work again and again in each and every report.
Please help me on this issue it will help lot of our developers time.
Thanks in Advance for your helphi,
even your question is really large and generic,
a very good start is this blog,
http://obiee101.blogspot.com/2008/09/obiee-setting-up-compagny-custom-skin.html
also check from the same blog,all the threads related with skin.
The main idea is to have configured all the views...images,logos,colors...and so on...
As far as presentation of "letters" / "numbers" at reports , in the configuration of each column,you can select to be this style default for the whole scenario..(i,e, always calendar.date column has 11-verdana-bold size...and so...)
Your most valuable tool is firebug,with this you can change the css....(more details in blog...)
hope i helped....
http://greekoraclebi.blogspot.com/
/////////////////////////////////////// -
Hi,
Using Oracle Discoverer 10.1.2 (Plus and Viewer) is it possible to create "Master reports" where sections of the output can be split up and distributed to different groups within an organisation (ie one section of the report has data for Finance dept. and other section of the report has data for HR dept.)?
Is it possible to automate the splitting and delivery of the master report output using scheduled workbooks and sending the output via email?
Kind Regards,
Leigh.John Hagel:
How can a cross-tab report be used as master-detail?
If the row items are treated as detail items, where would the master items be? There should be multiple detail records per a single master record? How can this be possible in a cross tab report?
Thanks. -
Discoverer report not working on R12 !
We have just migrated to R12 from 11i and some of the discoverer query is not working, but the same is working fine when we ran thru SQL Developer or TOAD.
Is there any context (mo_global.set_policy_context) needs to be set in Discoverer report to get the data?
ThanksThanks Srini,
There is no any specific error message, the strange thing is if I run the Discoverer report is not returning any data, but if I set the mo_global.set_policy_context ('S',111) in SQL Developer or TOAD and then run the discoverer report it return data...
Any pointers?
Maybe you are looking for
-
On 10.9 - I can no longer open, copy or preview files on a shared server
I am on a 2007 iMAC and I connect to a shared server in our office. I just upgraded to 10.9 and am experiencing a number of problems: - When trying to open files through finder I get the notification "Application not found" - When trying to copy to/
-
Why is my macbook pro running slow and I can also hear the fan running continuously
My macbook pro started running slow last night. I turned it off and waited til this morning to turn it on again. It is still running really slow when I browse through my dock or apps and everything takes forever to open, my fan is also running pret
-
How can I see thumbnail pictures for Videos like I can see for Jpegs
How can I see thumbnail pictures for videos like I can see for Jpegs in Elements organizer. Thanks BillJa
-
We are running SP 2010 service pack 2. We are seeing the following messages on at least one of our farm machines. I was wondering whether others here have seen these messages and found a solution. The powershell ise was a running task, but not actual
-
Can anyone send me a program on updating database.I am using SQL and microsoft access to create database