Master Slide will Not unlock
Master Slide will Not unlock, I need to edit a bullet point style and I cant seem to edit it.
I can see the master slide and when I goto arrange unlock, it is all greyed out.
I tried to select different pages in the master select and it still does not work.
any suggestions?
What am I doing wrong?
I don't think you are doing anything wrong. The Master Slides are not locked, per se, although certain elements within the Master might be. The Arrange and Format menus are context sensitive.
Try this:
Open the Master Navigator (slide the navigator view down with the handle at the top (looks like two parallel lines) to expose the Master Slides.
Select the Master Slide you wish to modify and select a line of bulleted text then Text Inspector > Bullets > select the bullet style you want.
Return to normal editing (close the Master Slide navigator) and create a new slide and then select the modified bulleted master from the toolbar pull down menu.
I think you will find that the bullet has changed to your new style. It works for me.
Good Luck.
Similar Messages
-
My 'slide to unlock' sometimes will not unlock when trying to answer a call. How do I stop that happening?
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data. -
My Ipad will not unlock. When I 'slide to unlock it speaks 'unlock key', if I touch the date it 'speaks the date', when I turn it on is 'speaks the time', but I cannot get into this ipad at all. It was working correctly yesterday, any idea's would be appreciated.
Your iPad is likely stuck in in VoiceOver mode. Try triple-clicking the home button or connecting your iPad to iTunes on your computer. You can disable VoiceOver in iTunes from the iPad's summary page by scrolling down to the Options box and clicking on Configure Accessibility.
Good luck! -
My IPod Touch has a small crack at the top of the screen and now the slider will not work to unlock it. Is the cracked screen the problem?
To get pass the passcode lockscreen, recovery mode and restoring should help: iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document. -
HT201401 My iphone will NOT unlock with my CORRECT passcode.
My iphone will NOT unlock with my CORRECT passcode. I can't even backup and restore on itunes because it's locked. What can I do? Does anyone have experience with this and know how to fix it?
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
hi my iphone 4s is unlock to orange uk i left orange gon to tesco o2 i have unlock sim but orange will not unlock my phone because i left will you unlock it for me
<Personal Information Edited By Host>Apple does not unlock iPhones - only the carrier to which the iPhone is
locked can initiate the unlock. You will have to work with Orange UK to
get your iPhone unlocked and there is no other legitimate way to get the
iPhone unlocked.
Enjoy the spam the spiders will send you - not wise to put your email
in a public forum. Same for publishing your phone number.
Forum etiquette is that your question will be answered
in the forum and not emailed to you. That procedure is used so that someone
else searching for the same problem will see any responses here while
they would not see anything emailed to you. -
HT4061 icloud says my ipad has not been backed up in 5 weeks it will not unlock
serial #DMPJL4HUF18P MY I PAD WILL NOT UNLOCK AND KEEPS SAYING IT HASNT BEEN BACKED UP IN 5 WEEKS I HAVE LOCKED IT PLUGGED IT INTO MY COMPUTER AND IT STILL WILL NOT BACK UP.HOW DO I UNLOCK MY I PAD?
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
HT201401 the slider will not work for iphone 3gs
My iphone 3GS slider will not respond.
i have done reset, update to current Firmware, ios, nothing seems to work.If nothing seems to work, there is a hardware problem.
-
PPT slides will not advance on their own, pausing automatically in Captivate 6 import
So frustrating, This was working around 8 pm lst nite, then all of a sudden the slides will not advance on their own. I've read several posts and tried most. I've unchecked the compression settings in Captivate 6, made sure I have the patch, I uninstalled 6 and tried using 5.5, then reinstalled 6 with the patch update. I've used Continue on enter and Go to next slide on Exit. NOTHING WORKS! and I need this by noon! what am I doing wrong!! This is Powerpoint 2007 slideshow with animation but no slide transitions going into Captivate 6. Please help I hvave 4 more to do this week by Wednesday.
Hi,
Can you check this in your PowerPoint.
Go to a slide select the object(s) that has animation applied, go to Animation tab and check if the animation is timed to appear ON CLICK with the Slide, that property would not migrate, you should change the drop down to With Previous .
Repeat this for all the animations. Go to Captivate library, if the Presentation is linked you can update it (if it is not linked switch to link from embed)
Thanks,
Anjaneai -
Upgraded to OS X 10.9 and Slideshow in iPhoto stopped working (stays on first slide; will not advance)
Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database followed by Option #1 to reapair permissions if #4 doesn't help.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If still not working log into another user account on your Mac and try a slideshow from there. If it works there then the problem is limited to your account. If it fails there it's system wide and may require a reinstall of iPhoto or the system. -
I purchased a game from iTunes Store thru Big Fish ad. Received receipt for full game. Game will not unlock. Says no purchase recorded. I have deleted and reinstalled. No help. Having serious reservations about buying another game for my IPad from Big Fish.
For customer service issues, go here...
https://expresslane.apple.com/Issues.action -
Iphone 4 will not unlock but the same portion of the screen is active using SMS or any other feature. What is the issue?
It won't recognise it at all, but luckily I backed up very recently.
I've booked an appointment with an Apple store who promise a working iPhone within 10 minutes of your appointment, whether fixed or a brand new iPhone.
Thank you both for your suggestions. I'll leave the question unanswered incase people have any other suggestions or similar issues.
Cheers. -
Ipod Nano Will NOT UNLOCK No Matter What I Do
My mom's green Ipod nano is going crazy it locked itself and no matter what I do it will not unlock. I restored it, I let the battery rundown, I pushed the menu and center buttons and nothing I can't even get it to restart that way. Please help!! thanks.
Hello kcbarker50,
Voiceover can be disabled by quickly pressing the home button three times. Alternatively, accessibility options (such as Voiceover) can be configured via iTunes.
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
Cheers,
Allen -
Iphone 3 frozen will not unlock
iphone 3 frozen will not unlock by pressing the home key and top right button together for ten seconds
hello slick try hard resetting your iphone (by holding both power button + home button untill the device restarts and shows the apple logo) if that didnt work try a fresh restaure in itunes
Maybe you are looking for
-
Hi Experts Does the partner profile created in R3 and the business system created in SLD needs to be the same for any idoc scenario. If yes why do we need to do so? and is it applicable for all types in partner profile? thkx
-
Vertical line on my ipod nano 3rd gen?
Yesterday my ipod was fine, last night i added some songs to it and then after when I was listening to music i noticed a very tiny vertical line up top above the title of the song playing.. it didn't look too out of place so i thought maybe i'd just
-
Stock On Hand vs Stock Allocated Report
I know that both of these can be found in one report for a single item with MD04. Can this be done for multple materials in one report so that we can plan replenishment over a whoel range? I have asked my superiors but they say it can't be done. Colm
-
Error in Database Studio: Connect to user management database not possible
Hello, Everytime I start the Database Studio 7.9 (the latest version 7.9.08.18) it show me the following error: Could not access to user management See Window -> Show View -> Event Log Viewer for more details In Event Log Viewer I see the following i
-
When i plugged a projector into my iMac the resolution changed on my desktop
I'm a relativly new user to mac. When i plugged a projector in through an adapter via HDMI the resolution changed on my iMac & I am unable to set it back to the way it was. Am i missing something?