Master slides I created and saved as a theme won't work

I've created a set of Master Slides for Keynote and saved the file as a .kth file per the Help function in Keynote. However, whenever I try to use them (apply a theme to a slide) I get this message when I try to edit the slide: "The object you are trying to select can only be edited in the master slide." Apparently I've done something wrong.....but what?
Any help would be greatly appreciated.

Hello Roccitygem,
Since this forum is specifically for questions pertaining to our Illustrator getting started project, I am going to move this question to the main Illustrator forum after I post my reply, where you'll have a much better chance at getting assistance.
Thank you,
Ed Sullivan

Similar Messages

Send as email attachment the billing document as pdf when created and saved

HI All,
I have already searched the forum but could not find a satisfying answer so i am posting this question,
The requirement is to send an email containing biiling document converted to pdf format when a billing document
is created and saved in VF01 transaction.
I have already converted the output to pdf format in my driver program and also know how to send an email containing the same ..but this works only when user prints using VF31 .
Kindly tell the configuration steps which are required...and hot to achieve the same.
Regards,
Prateek

Hi Prateek,
There is a blog on a similar topic which explains how to email purchase order in SAP to the vendor. The settings are required in Vendor Master, NACE and SCOT.
Following is the link to it.
http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/
It has given steps to trigger the output.
Its not exactly what you require, but might be helpful.
Regards,
Abhijeet Kapgate

From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

Welcome to the Apple Community.
What exactly do you mean by 'it doesn't save'.
Does this mean it doesn't save at all, doesn't save to the iCloud folder or doesn't sync with other the devices or iCloud.com.

When saving documents in PDF format a .txt document is also created and saved

When saving documents in PDF format to the my documents folder on a PC a .txt document is also created and saved, does anybody know the where the setting is that allows this functionality (duplicate document in txt format) to be switched off thanks.

When saving documents in PDF format to the my documents folder on a PC a .txt document is also created and saved, does anybody know the where the setting is that allows this functionality (duplicate document in txt format) to be switched off thanks.

How should we be going about creating and saving and/ or exporting our ODC files using Excel 2013 for use in Project Server 2013 Online?

Hi I need your guidance on how I should go about setting up my Excel 2013 reports so that others in our Project Online 2013 environment can access and updates these reports of mine.
My questions are as follows:
I presume I need to create and save my ODC files in a PWA > Data Connections folder. I have English and French users in our environment. Do I need save them twice? Once in the French and again in the English Data Connections folder?
Likewise for the Excel file?
How should I go about creating my ODC files within Excel? By default, the ODC files are being created on my PC's > My Documents > My Data Sources folder. I presume I need to get them saved or exported to the PWA > Data Connections
folder. So, How should I be going about creating and saving and/ or exporting the ODC files???
FYI...My oData Feeds that I wish to use and join in this particular Excel file are as follows:
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/AssignmentTimephasedData01T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Projects()?$select=ProjectId,ProjectName,CAS_Classification,CAS_PCO,CAS_IT_Department,CAS_Program,CAS_SubProgram
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/TimeSet()?select=TimeByDay,TimeDayOfTheWeek$filter=TimeByDay ge datetime'2014-10-19T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Resources()?$select=ResourceId,ResourceName,Programs,Supplier,Source,Role,CostType
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Thank you Guilaume. May I ask you to help clarify a bit more for me? If I have to do it for both languages (the reports and ODC files), do I simply copy the same ODC files from e.g., the English to French folder in PWA (Odc files)? Or does
that defeat the purpose? Or, do I need to create a new set of oData Feed Connection files with a French version of Excel 2013 and save them to the French Data Connections folder in PWA? Do I need to have a French version of Excel 2013 to create
French ODC files and ultimately French based reports and/ or vice versa?
I did notice that the following oData metadata command from within a browser produces different results (ie., English versus French metadata returned) depending on who runs it (i.e., French or English user, etc). As you can see I am a bit confused.
Any help you can provide would be greatly appreciated.
https://XXXXX.sharepoint.com/sites/pwa/_api/projectdata/$metadata
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

A file which was created and saved using Adobe Photoshop CS6 is not opening anymore HELP

Hi, please help with my issue which is as follows:
A file which was created and saved using Adobe Photoshop CS6 is not opening anymore and sends a message saying that the file is not compatible.
What should I do, I have invested so much in that file and I dont think i will be able to do it all over again.

That's why people do incremental saves and use backups... You could try to open the file in an image viewer like IrfanView and see which parts are salvagable, but that's as good as it gets most likely...
Mylenium

HT202879 I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?

I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?

I'm not sure what you mean by it making accessing files more complicated. I have both Pages 4.3 & Pages 5.1 icons in my Dock as well as Numbers 2.3 & Numbers 3.1. I continue to use the iWork '09 versions for my everyday needs. As long as the new versions are in your Applications folder & the '09 versions in the iWork '09 folder, Software Update will not have a problem updating them even if Apple should come out with a new update for the '09 versions.
Because I have moved the new versions to an external drive & renamed the apps because I want '09 to be the default apps, I do have to remember to move them back to my applications folder & restore the original names before updating. But since you like the new versions this "complication" doesn't apply to you.

I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly. please help.

I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly. Please help.

Remove preferences on Mac OS
Quit Dreamweaver.
In the Finder, navigate to /Users/Your User Name/Library/Application Support/Adobe.
Rename the Dreamweaver preferences folder:
Dreamweaver CS5: Rename the Dreamweaver CS5 folder to, for example, Old Dreamweaver CS5.
Navigate to /Users/Your User Name/Library/Preferences.
Rename the Dreamweaver preferences file:
Dreamweaver CS5: Rename the Adobe Dreamweaver CS5 Prefs file to, for example, Old Adobe Dreamweaver CS5 Prefs.
Try to re-create problem
After you have removed your existing preferences, restart Dreamweaver. The application creates new preferences files, folders, and registry entries, as applicable, using the default settings.
Then try to re-create the problem that you had before.
If the problem was resolved, then damaged preferences was the cause.
If the problem persists, then the preferences are not the cause and you can replace the original preferences.
To replace the original preferences:
Quit dreamweaver.
Delete the new preferences folder and restore the original name of the previous folder.

TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

Same question Wish someone had replied!
I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

I installed iTunes 10.5.3.3 and now my DVD player won't work.

I installed iTunes 10.5.3.3 and now my DVD player won't work and has this error:
This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
Any ideas why iTunes renders my DVD drive unusable? I have uninstalled and reinstalled iTunes and when reinstalling I had my device manager open and saw during the installation how my DVD player went from accessible to not being able to start.
Why is this happening?
Here is my computer information:
Dell
Latitude D630
Intel Core Duo CPU T770 @2.40 Hz
4.00 GB RAM
32-bit Operating System
Thank you,
Kelly

There's a few different possibilities with a code 10, Kelly. To narrow in on the likeliest culprits it would help to have a closer look at your system.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

I have Macbook Pro and Adobe CC. 3D won't work.. I can open the 3D panel options but clicking ok or even choosing preview brings up an error message [can't]

I have Macbook Pro and Adobe CC. 3D won't work.. I can open the 3D panel options but clicking ok or even choosing preview brings up an error message [can't]
My friend has exact same Mac and CC and he has the same problem. We both have up to date Yosemite and CC versions.
Any ideas?

Hi,
Could you please confirm the CC application you are using.
It would be great if you post a screenshot of the problem.
Regards,
Sumit Singh

HT2486 I just upgraded to 10.6.3 and now my address book won't work (4.1.2) how to I upgrade it?

I just upgraded to 10.6.3 and now my address book won't work (4.1.2) how to I upgrade it?

Software Update (under the Apple menu).
Current Snow Leopard version is 10.6.8.

I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

Visit HP's support site to see about downloading an updated driver. Or you can check at support.apple.com/downloads/ for new HP printer drivers package.

Had to purchase two OS X system upgrades, new iPhoto etc. just to connect new iPhone 5 and now half my apps won't work. No rosetta and missing lost dogs pics from iCloud...HELP!

I had to purchase two OS X system upgrades, snow leopard and mountain lion, just to connect my new iPhone 5 and somewhere between uploading iPhone 4S pics to iCloud some important pics disappeared then installed new iTunes and purchased new iPhoto all just to connect new iPhone 5 and now half my apps won't work. No Rosetta to make apps work but its not as simple as upgrading apps and missing lost dogs pics from iCloud...HELP!

File a complaint with Apple for not giving adequate warning before upgrading OS X that it would render PPC programs dead.
That someone at Apple said requiring the iPhone 5 to have 10.8 (10.6.8 is the minimum actually) and in order to remain a loyal Apple customer they need to fix this mess and revert your machine and software back to 10.6.8
You see, 10.6.8 would have ran your iPhone 5 and ran your PPC based software, so whoever told you to upgrade to 10.8 was wrong and they need to fix your machine.
It can be reverted to 10.6.8 yourself.
How to revert your Mac to Snow Leopard
Most commonly used backup methods

Windows 7 and dv4-1125nr TrackPad - scrolling won't work

I have installed all the latest drivers via HP support's website and the trackpad's scrolling won't work on my dv4-1125nr when in Windows 7. It works fine in Vista, so I'm wondering if there is a way to get it working properly in Win 7. Also the software update manager is not available for download under my model number. If that was available, perhaps that would find a necessary download and install accordingly. Any help is greatly appreciated as this is a major annoyance!! Thanks!

Hi Daniel, thanks for your post, recently I also upgraded my laptop(dv4-1125nr) from vista to Win 7 ultimate, after then my touchpad(touch keys just above the keyboard, it contain mute, vol. up or down, wireless active or inactive) is not able to work.
You informed that we need uninstall and then install Synaptics touchpad for Win7 by HP here
I would like to know which driver i need to uninstall and then install above one and even i attached my laptop contral panel screen shot for your reference. your help is highly appreciated.
Thanks,
Praveen Kumar. K

Master slides I created and saved as a theme won't work

Similar Messages

Maybe you are looking for