Master table for fetching Shipping Type Discription.
Hi ,
I can poplulate the Shipping type value from VBKD in field VSART.
But it is providing me values in Numbers which user cant understand.
I want to know from where i can fetch the proper Discription of Shippin types.
In table T173 (check table) i can see discription but in actual structure there is no field as such BEZEI.
thanks,
Edited by: Kumar_rohitkg on Jun 11, 2010 11:24 AM
Hi,
Please check the field in table T173T -Routes: Mode of Transport by Shipping Type: Texts
and in table T173 -'Routes: Mode of Transport for Each Shipping Type' You wont find field BEZEI.
But that field is of description and available in t173T only.
Hope this will resolve your issue.
Regards,
Krishna O
Similar Messages
-
Master table for RFQ(Request For Quotation). Field name is RFQ
hi,
I need to know the master table for RFQ(Request For Quotation) number . The field name is ANFNR . In the T.code ME42, i found that it is using the structure RM06E. But i need to know its corresponding master tablethe table EKKO (EKPO Items table) and you can find the Quote number in EBELN field. Don't go by the structure / field name on the screen
Forgot to metnion that you need to use the right document category and the document type.
Regards,
Ravi
Note : Please mark the helpful answers
Message was edited by: Ravikumar Allampallam -
Material Master views for every material type
HI Expertis,
I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
As an example, for the material type "FGTR" what should be the required views to create material master?
From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
I would be gratefully thank u, if u can guided me on this matter.
Thanx & Regards,
Rashika.Hi,
You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T .From this tables ,for each material type, you get all views.
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
hopw this will help you.
With Regards,
Jaheer -
Master Table for Work Items from BSP Application
hello guys,
just want to ask if there is a master table for work items (and other details) from BSP application?Hi,
Ya its true but i want to connect my customized application to UWL in Enterprise Portal and there after approval i want my workitems to be punched in R/3 system.Is there any source code available,so that my application directly contact UWL in sap enterprise Portal as a link or workitems where user should have an option to approve or reject.
If u have any idea plz let me know.
Thanks in Advance
Regards
Santosh Saraf -
Master table for the field BSART
hi friends
pls tell me, which is the master table for the field BSART.
because i want to get the search help fo that field....Hi babu,
If u want know what the table and where the fields are resued go to T-code SE15. u can find ...
Regards,
Bharani. -
Master table for Qualification ID (In SERVICE Product)
Hi friends,
Could you please help me out with master table for Qualification ID and its description?
Thanks,
DebasishHRP1000
-
Table for fetching GL Information.
Hi,
Could any one help me out to find the table for fetching the GL information which is not yet posted..ie parked.
Thanks & Regards,
Sudheer.hi see this link
http://www.sap-img.com/financial/important-tables-in-sap-fi.htm
with regards
and cheers
s.janagar -
What to know the master table for the following fields
I want to know the master table for the following fields.
Company code ( BUKRS )
Chart of depreciation ( AFAPL)
Main Asset Number (ANLN1)
Asset Sub Number ( ANLN2 )
Asset Class ( ANLKL )hi,
1) t001 (<b>for assets T093C</b>)
2) t096
3 and 4) anla
5) anka
rgds Andreas
Message was edited by:
Andreas Mann -
Tables for Documents&doc. type assigned to Equipment master
Hi
I need a table for Documents&d oc. type assigned to Equipment master .I have tried in ITOB, EQUI, DRAW. i could not find this
Thanks
Seenuhi
yes you can use object key, it is the one which relates with the equipment ( object key <b>EQUI</b>)
regards
thyagarajan -
Sales Order Unable to Use New Condition Tables for Tax Condition Type
Dear All,
I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
I wonder if anyone encountered the same problem as me.
Kindly advise.
Thank you.
Regards,
YvonneHi
Yvonne
I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
Secondly for tax purposes I suggest Try to have Customer and material tax classification approach this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
This information can be passed on to FI using Different Tax code for Different combination.
I hope this helps
Regards
Mandar -
Cost center (KOSTL) is not updating in HR master table for infotype 0001
Hi ABAP gurus,
We have one interface where we are posting the HR master data using the IDOC (IDOC_INPUT_HRMD) into SAP.
While updating cost center, We have one issue regarding infotype 0001.
It is working fine for all the fields except: KOSTL, ORGEH, STELL. Surprisingly the created IDOC contains the value in these fields but it is not getting updated in master table PA0001. I have tryied inserting the value manually and it is working fine and tried with BDC Programming and no issues. Only we have this issue while we want to use the IDOC. This is mandatory in our interface.
While debugging the IDOC function module I found that one condition is there for these three fields.
CHECK NOT inte IS INITIAL. where inte value is being fetched from table t77s0 based on
GRPID = PLOGI
SEMID = ORGA
In this condition I see no value for this combination and hence it is not getting further. I am not sure how this condition does exist for only these three fields and not for others.
Can any please provide the reasona and solution for this.
Appreciate the help in advance.
Thanks,
JitenderDear Mohan,
Try assigning your cost center to position it will default both your org unit and cost center.
Cheers! -
Hi,
In creation of MAINTENANCE ORDER, I need to create a Search help for Work Center and Plant based on :
1. Order type
2. Planning plant
3. Business area
Could you help me out by letting me know what are the master tables having these fields.
Regards,
Srilakshmi B* Validate Work Centre
if not ZES_PO_ITEM-ST_ARBPL is initial.
clear : T399X.
select single * from T399X where WERKS = ZES_PO_ITEM-ST_SWERK
and AUART = ZES_PO_ITEM-ST_AUART.
if SY-SUBRC = 0.
call function 'CR_WORKSTATION_READ_ROUTING'
exporting
ARBPL = ZES_PO_ITEM-ST_ARBPL
DATE = SY-DATUM
PLNTY = T399X-PLNTY
WERKS = ZES_PO_ITEM-ST_SWERK."L_SWERK. "Changed on 27th Feb
if SY-SUBRC <> 0.
message E138(ZSM) with 'Work Centre not maintained for plant' ZES_PO_ITEM-ST_IWERK.
endif.
endif.
endif.
Regards
Gopi -
Master table for HR PD process
Dear Friend,
I need a list of all the master tables ( infotypes) for HR Personal Development process .I know the PA process bt PD nt waare abt that so plzzzzzzzzzzzzzzz .....
asap.
thanx
regrds
sandeep dabral
Edited by: SANDEEEP DABRAL on Feb 7, 2009 10:21 AMHi,
Hoping that this will help you out
HRP1000 Infotype 1000 DB Table (Objects)
HRP1001 Infotype 1001 DB Table (Relationships)
HRP1002 Infotype 1002 DB Table
HRP1003 Infotype 1003 DB Table
HRP1004 Infotype 1004 DB table
HRP1005 DB Table for Infotype 1005 (Planned Compensation)
HRP1006 Infotype 1006 DB table
HRP1007 Infotype 1007 DB Table
HRP1008 Infotype 1008 DB Table
HRP1009 Infotype 1009 DB table
HRP1010 Infotype 1010 DB table
HRP1011 Infotype 1011 DB Table
HRP1013 Infotype 1013 DB Table
HRP1014 Infotype 1014 DB Table
HRP1015 Infotype 1015 DB table
HRP1016 Infotype 1016 DB Table
HRP1017 Infotype 1016 DB Table
HRP1018 DB Table for Infotype 1018 Cost Distribution
HRP1019 DB Table for Infotype 1019 Required Positions
HRP1020 Infotype 1020 DB table
HRP1021 INFOTYPE 1021 DB TABLE
HRP1023 Infotype 1023 DB table
HRP1024 INFOTYPE 1024 DB TABLE
HRP1025 INFOTYPE 1025 DB TABLE
HRP1026 Infotype 1026 DB table
HRP1027 Infotype 1027 DB table
HRP1028 Infotype 1028 DB Table
HRP1029 Infotype 1029 DB table
HRP1030 Infotype 1030 DB table
HRP1031 Infotype 1031 DB table
HRP1032 Infotype 1032 DB Table
HRP1033 DB table for infotype 1033
HRP1034 Infotype 1034 DB table
HRP1035 Infotype 1035 DB Table
HRP1036 Infotype 1036 DB table
HRP1037 Infotype 1037 DB Table
HRP1038 Infotype 1038 DB table
HRP1039 Database Table for Infotype 1039
HRP1040 Database Table for Infotype 1040
HRP1041 DB Table for Infotype 1041
HRP1042 Infotype 1042 DB Table
HRP1043 DB Table for Infotype 1043
HRP1044 DB Table for Infotype 1044
HRP1045 DB Table for Infotype 1045
HRP1046 Database Table for Infotype 1046
HRP1047 DB Table for Infotype 1047
HRP1048 DB Table for Infotype 1048
HRP1049 Database Tables for Infotype 1049
HRP1050 DB Table for Infotype 1050 (Job Evaluation Results)
HRP1051 DB Table for Infotype 1051 (Survey Results)
HRP1060 DB Table for Infotype 1060
HRP1061 DB Table for Infotype 1061
HRP1062 DB Table for Infotype 1062
HRP1063 DB Table for Infotype 1063
HRP1201 Infotype 1201 DB Table
HRP1205 Infotype 1205 DB Table
HRP1206 Infotype 1206 DB Table
HRP1208 Infotype 1208 DB Table
HRP1209 Infotype 1209 DB Table
HRP1210 Infotype 1210 DB Table
HRP1211 Infotype 1211 DB Table
HRP1212 Infotype 1212 DB Table
HRP1213 Infotype 1213 DB Table
HRP1214 Infotype 1214 DB Table
HRP1215 Infotype 1215 DB Table
HRP1216 Infotype 1216 DB Table
HRP1217 Infotype 1217 DB Table
HRP1218 DB Table for Infotype 1218
HRP1220 DB Table for Infotype 1220 Activity Profile
HRP1221 DB Table for Infotype 1221 Excluded Activities
HRP1222 Infotype 1222- General attribute maintenance
HRP1230 DB Table for Infotype 1230
HRP1240 DB Table for Infotype 1240
HRP1250 DB table for infotype 1250
HRP1251 DB table for infotype 1251
HRP1252 DB table for infotype 1252
HRP1253 DB table for infotype 1253
HRP1254 DB Table for Infotype 1254
HRP1260 DB Table for Infotype 1260
HRP1270 DB Table for Info Type 1270
HRP1403 DB table for infotype 1403
HRP1404 DB table for infotype 1404
HRP1500 DB Table for Infotype 1500
HRP1501 DB Table for Infotype 1501
HRP1502 DB Table for Infotype 1502
HRP1503 DB Table for Infotype 1503
HRP1504 DB Table for Infotype 1504
HRP1505 DB Table for Infotype 1505
HRP1506 DB Table for Infotype 1506
HRP1507 DB Table for Infotype 1507
HRP1518 DB Table for Infotype 1518
HRP1519 DB Table for Infotype 1519
HRP1520 DB Table for Infotype 1520
HRP1600 Database Table for Infotype 1600
HRP1601 Database Table for Infotype 1601
HRPAD21 Additional data PAD21
HRPAD22 Additional data PAD22
HRPAD23 Additional data PAD23
HRPAD25 Additional data PAD25
HRPAD27 Additional data PAD27
HRPAD31 Additional data PAD31
HRPAD34 Additional Data for Relationship 'has attended'
HRPAD44 PAD44 Additional Data
HRPAD47 PAD47 Additional Data
HRPAD48 Additional Data PAD48
HRPAD50 Additional Data PAD50
HRPAD51 Additional data PAD51
HRPAD53 Additional Data PAD53
HRPAD63 PAD63 Additional Data
HRPAD77 Additional data for PAD77
HRPADBLIST Additional Data Databases
HRPADD2 Additional Data PADD2
HRPADD3 Additional Data PADD3
HRPADIC Additional Data PADD2
HRPADNLIST Additional Data Number List
HRPADNN General Additional Data Table
HRPADP1 Additional Data PADP1
HRPADP2 Additional Data PADP2
HRPADPM Additional Data PADPM
HRPADTI PADTI Additional Data
HRPADUZ PADUZ Additional Data- Requirements Assignment of Persons
HRPADXN Additional Data PADXN
HRPS_T012K For Decoupled Access to T012K (House Bank and Account)
HRPVAC List of vacant positions
HRPXXXX DB Table for Infotype XXXX
HRPYYYY DB Table for Infotype YYYY
Warm REgards,
Kapil -
Creation of New Table for Delivery Output Type.
Hi Guys,
I need to replace an existing table by creating a new Table in the existing Access Sequence with the combination of "Ship to Party/Product Hierarchy".
Logistics>Shipping>basic Shipping functions>Output determination>Maintain Condition Tables-->maintain output condition table for deliveries.
I am choosing a new table by the name 902, but i am not getting the field " PRODH Product Hierarchy" on the right hand side to choose from.
I checked the field catelog also. Firstly the field catelog was also not having the field, and then i added the field in it by choosing new entries.
I guess i am missing some step in between, thats why the new field (PRODH) is not showing on the right hand side while creation of the condition table.
One more thing, when i am seeing the Field Catelog, i am able to see a very large number of fields, then why only a few are appearing during creation of a new table??????
Can you guys correct me and let me find a way.????
Thanks very much indeed.
Regards,
VivekHi If u have already the field in FC u can add with new entries .
Try with ,enter t- code <b>SE11</b>, enter <b>KOMB</b>- it will ask for access key get from basis and add u r Field catalog
Field catalog for condition key: output determination
If at all u want a new field tao add to u r FC u Can try with userexit.
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields.
The fields which are not in either of the two tables KOMK and KOMP
cannot be used in pricing .Sometimes a need arises when the pricing
is to be based on some other criteria which is not present in the form of fields in either of the two tables.
This problem can be solved by using USEREXITS which are provided for pricing in SD.
Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP
program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely
created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that
has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose
includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:<b></b>
Message was edited by:
SHESAGIRI GEDILA -
Hi All,
I am creating a report to display the stock information of a material. In that i need to include all the special stocks also.
Can anyone please tell me the table containing the data for special stock type E,K,M,O,P,Q,V,W,YCheck these tables.
MSCA Sales Orders on Hand with Vendor
MSCD Customer stock with vendor
MSCS Customer stock with vendor - Total
MSFD Sales Order Stock with Vendor
MSFS Sales Order Stock with Vendor - Total
MSID Vendor Stock with Vendor
MSIS Vendor Stock with Vendor - Total
MSKA Sales Order Stock
MSKU Special Stocks with Customer
MSLB Special Stocks with Vendor
MSOA Total Sales Orders on Hand with Vendor
MSPR Project Stock
MSRD Project Stock with Vendor
MSRS Project Stock with Vendor - Total
MSSA Total Customer Orders on Hand
MSSL Total Special Stocks with Vendor
MSSQ Project Stock Total
Maybe you are looking for
-
I have an ipod touch 2gen.
I have an ipod touch 2gen. I tried to upgrade to itunes software 10 on my computer. Upgrade failed. My ipod now appears as a camera in my computer. I removed all apple software, as instructed on the apple site. I then tried to reinstall the software
-
Display Color Profile For iiyama HM903DT
I've just been given an iiyama HM903DT monitor but it doesn't want to play with my mac mini The trouble is this:- If a turn on my mac with the screen powered on my machine creates a color profile for it (from monitor dcc information I suspect). That
-
Computer not recognizing ipod, and getting music off it
first, i want to put my music from ipod onto new computer....but i dont want to pay for that yami thing...anyway to do it free??? and my computer wont even recognize my ipod when i plug it in? i have already installed itunes, so im confused
-
How to configure the Access point 1602 that I just purchased
Hi Everyone, Hope you can help. I just purchased a AIR-SAP1602I-A-K9 from one internet vendor. Along with it I also purchased an power injector. I tried to use it as a standalone AP. It does not come with any instruction and I am not good at Wifi con
-
Safari, Secure connection to sites, and Parental Control
I'm setting up Safari for a child, and have Parental Controls enabled and am customizing the list of sites that can be visited. I'm allowing Netflix.com and have multiple http and https Netflix URL's allowed. However, when I test accessing this site,