Master table for RFQ(Request For Quotation). Field name is RFQ
hi,
I need to know the master table for RFQ(Request For Quotation) number . The field name is ANFNR . In the T.code ME42, i found that it is using the structure RM06E. But i need to know its corresponding master table
the table EKKO (EKPO Items table) and you can find the Quote number in EBELN field. Don't go by the structure / field name on the screen
Forgot to metnion that you need to use the right document category and the document type.
Regards,
Ravi
Note : Please mark the helpful answers
Message was edited by: Ravikumar Allampallam
Similar Messages
-
Master table for the field BSART
hi friends
pls tell me, which is the master table for the field BSART.
because i want to get the search help fo that field....Hi babu,
If u want know what the table and where the fields are resued go to T-code SE15. u can find ...
Regards,
Bharani. -
How to find the Check table for a field ?
Hello All,
I have the filed name f1.
Now I want to know the check table of this field programatically and if this field has a configuration table then I need that table also.
eg: if werks is the field the Master Table is : MARC
and Configuration Table is : T001W.
Is this possible first of all programatically ?
If yes can anyone help me out ?
Regards,
Deepu.KHi again,
1. I don't know the master table for the field werks
A field is never independent. It is always linked to a table,
otherwise the information is only half.
2. So incase if we do not know the tablename,
its best to query the table DD03L with WERKS,
and filer out CHECKTABLE with *,
and take any one record.
regards,
amit m. -
What to know the master table for the following fields
I want to know the master table for the following fields.
Company code ( BUKRS )
Chart of depreciation ( AFAPL)
Main Asset Number (ANLN1)
Asset Sub Number ( ANLN2 )
Asset Class ( ANLKL )hi,
1) t001 (<b>for assets T093C</b>)
2) t096
3 and 4) anla
5) anka
rgds Andreas
Message was edited by:
Andreas Mann -
tell me the tables and fields for quotation and how to find the lost quotations.
Table for Quotation VBAK. Document type is QT.
-
R/3 tables for the fields of 0fi_gl_40
How to find the r/3 tables for the fields of the datasource 0FI_GL_40.For example this datasource has ANLN1(Asset),ANLN2(Asset Subnumber) and AUFNR(Order)
fields.Is there any tcode or table that gives the r/3 tables for the the fields of the above datasource?Sometimes the help really does provide the information
http://help.sap.com/saphelp_nw70/helpdata/EN/88/3c36861f874739a916df63ab6d7ca0/content.htm -
Maintain separate table for these fields
I want to maintain separate table for this fields.
1. Sales order number
2.item number
3.material
4.qty pricing date price change date if u user changes price manually.
5. Order price
6.sales value
Where will we get these fields from which table.Hi,
1. Sales order number = VBAK-VBELN
2.item number = VBAP-POSNR
3.material = VBAP-MATNR
4.qty pricing date price change date if u user changes price manually.
Qty from VBAP-KWMENG
Price date = VBKD-PRSDT
Change Date = VBAK-AEDAT
5. Order price = VBAK-NETWR
Thanks,
Mandar -
Hi Experts,
I am working on an ESS MSS project. Currently I am working on a report in which I have to find the expenses of an employee.
The field BETRG gives me the expenses for that employee. but I am unable to find a table for this field.
Does anybody know how to extract fieldHi Mukul,
Goto SE11 and give this data element and try a where used list.
U can get list of tables which uses this field.
Here are some list of tables which uses this field.
HRP1501(DB Table for Infotype 1501)
HRP1502(DB Table for Infotype 1502)
PA0021(For infotye 0021)
PA0052(Wage maintainence)
I thnk u shuld use these tables since ur looking for employee expenses.Still there are many PA tables associated with it .
Chk which table suits ur requirement.
P01CBF
P01CEF
P01CGP
P01CSL
P01CSO
P01Y15
Regards,
Lakshman. -
Master Table for Work Items from BSP Application
hello guys,
just want to ask if there is a master table for work items (and other details) from BSP application?Hi,
Ya its true but i want to connect my customized application to UWL in Enterprise Portal and there after approval i want my workitems to be punched in R/3 system.Is there any source code available,so that my application directly contact UWL in sap enterprise Portal as a link or workitems where user should have an option to approve or reject.
If u have any idea plz let me know.
Thanks in Advance
Regards
Santosh Saraf -
Master table for Qualification ID (In SERVICE Product)
Hi friends,
Could you please help me out with master table for Qualification ID and its description?
Thanks,
DebasishHRP1000
-
Use 'SDPARTNERLIST' as a table for pick fields
Hi Experts,
can we use 'SDPARTNERLIST' as a table for pick the fields paertenr function, partner and name1 in scripts,
or is any reference table for these fields,,, if any could u tell me fields and tables
Edited by: Alvaro Tejada Galindo on Feb 25, 2008 5:46 PMHi,
You acn code your select in the following no>
select single vorna nachn from PA0002 into
(gv_vorna , gv_nachn )
where pernr = ......
subty = ...... and
OBJPS = ...... and
SPRPS = ......and
ENDDA = ......and
BEGDA = ......and
SEQNR = ........
Whatever key fields data available you can pass it in the where clause of the select query.
Then after the select query, you can pass in the same variables in the script gv_vorna , gv_nachn to print the data.
Hope this helps.
Regards,
JLN -
Function Module/Table to retrieve check table for standard fields
Hi,
Is there any function module or database table that holds the check table for standard field? Ex. BUKRS = T001.Hi MArc,
Goto DD03L table
Enter fieldname and tablename, you will get check table in CHECKTABLE field.
e.g. fname - MATNR, tbname MARD then CHECKTABLE - MARA
Reg,
Sachin -
Cost center (KOSTL) is not updating in HR master table for infotype 0001
Hi ABAP gurus,
We have one interface where we are posting the HR master data using the IDOC (IDOC_INPUT_HRMD) into SAP.
While updating cost center, We have one issue regarding infotype 0001.
It is working fine for all the fields except: KOSTL, ORGEH, STELL. Surprisingly the created IDOC contains the value in these fields but it is not getting updated in master table PA0001. I have tryied inserting the value manually and it is working fine and tried with BDC Programming and no issues. Only we have this issue while we want to use the IDOC. This is mandatory in our interface.
While debugging the IDOC function module I found that one condition is there for these three fields.
CHECK NOT inte IS INITIAL. where inte value is being fetched from table t77s0 based on
GRPID = PLOGI
SEMID = ORGA
In this condition I see no value for this combination and hence it is not getting further. I am not sure how this condition does exist for only these three fields and not for others.
Can any please provide the reasona and solution for this.
Appreciate the help in advance.
Thanks,
JitenderDear Mohan,
Try assigning your cost center to position it will default both your org unit and cost center.
Cheers! -
Hi,
In creation of MAINTENANCE ORDER, I need to create a Search help for Work Center and Plant based on :
1. Order type
2. Planning plant
3. Business area
Could you help me out by letting me know what are the master tables having these fields.
Regards,
Srilakshmi B* Validate Work Centre
if not ZES_PO_ITEM-ST_ARBPL is initial.
clear : T399X.
select single * from T399X where WERKS = ZES_PO_ITEM-ST_SWERK
and AUART = ZES_PO_ITEM-ST_AUART.
if SY-SUBRC = 0.
call function 'CR_WORKSTATION_READ_ROUTING'
exporting
ARBPL = ZES_PO_ITEM-ST_ARBPL
DATE = SY-DATUM
PLNTY = T399X-PLNTY
WERKS = ZES_PO_ITEM-ST_SWERK."L_SWERK. "Changed on 27th Feb
if SY-SUBRC <> 0.
message E138(ZSM) with 'Work Centre not maintained for plant' ZES_PO_ITEM-ST_IWERK.
endif.
endif.
endif.
Regards
Gopi -
Table for Screen Field Properties
Hi Guys,
I have strange requirement.
Lets say i have designed 5 fields in the Dialog Program. 2 fields belongs to Group1,another 2 fields belongs to Group2 and 3rd field is belongs to group3.
Where can i find those values (I mean which table). I belive it should be Program,screen no and data type.
Note : Groups you can set in Attributes of the field in Dialog Program.
Thanks
PoornaSetting Screen Field Attributes
Every screen field has attributes that you set in the Screen Painter when you define the
screen. At runtime, you may want to change these attributes, depending on what
functions the user has requested in the previous screen. At runtime, attributes for each
screen field are stored in a memory table called SCREEN. You do not need to declare
this table in your program. The system maintains the table for you internally and updates
it with every screen change.
The memory table SCREEN contains the following fields:
Name Length Description
NAME 30 Name of the screen field
GROUP1 3 Field belongs to field group 1
GROUP2 3 Field belongs to field group 2
GROUP3 3 Field belongs to field group 3
GROUP4 3 Field belongs to field group 4
ACTIVE 1 Field is visible and ready for input
REQUIRED 1 Field input is mandatory
INPUT 1 Field is ready for input
OUTPUT 1 Field is for display only
INTENSIFIED 1 Field is highlighted
INVISIBLE 1 Field is suppressed
LENGTH 1 Field output length is reduced
DISPLAY_3D 1 Field is displayed with 3D frames
VALUE_HELP 1 Field is displayed with value help
To activate a field attribute, set its value to 1. To deactivate it, set it to 0. When you set
the ACTIVE attribute to 0, the system suppresses the field and turns off the ready for
input attribute. The user can neither see the field nor enter values into it.
Note
You can define values for each of these attributes in the Attribs. for 1 field section in
the field list of the Screen Painter. If you need more information about attribute
meanings, see BC ABAP/4 Workbench Tools.
Modifying the Screen SAP AG
Setting Screen Field Attributes
32u20134 May 1997
As an example of modifying the screen dynamically, start with transaction tz50
(development class SDWA).
The transaction consists of two screens. In the first screen the user can enter flight
identifiers and either request flight details (by pressing a Display pushbutton) or press the
Change pushbutton to change the data of screen 200.
The field attributes are now set dynamically, according to whether the Display button or
the Change button was selected. In both cases the same screen is now called, but with
different field attributes.
If the same attributes need to be changed for several fields at the same time, these fields
can be grouped together. For example, in order to change the fields in screen 200
dynamically, we assign these fields in the Screen Painter to the group MOD. You can
specify up to four modification groups for each field. The contents of the Groups field
are stored in the SCREEN table.
The changes to the attributes of the fields in this group can be implemented in a PBO
module:
SAP AG Modifying the Screen
Setting Screen Field Attributes
May 1997 32u20135
MODULE MODIFY_SCREEN OUTPUT.
CHECK MODE = CON_SHOW.
L0OP AT SCREEN.
CHECK SCREEN-GROUP1 = u2019MODu2019.
SCREEN-INPUT = u20190u2019.
MODIFY SCREEN.
ENDLOOP.
ENDMODULE.
The memory table SCREEN contains each field of the current screen together with its
attributes.
The LOOP AT SCREEN statement puts this information in the header line of this system
table.
In this example taken from transaction tz50, if the user chooses Display then SCREENINPUT
is set to u20190u2019 and all fields belonging to the MOD group thus become display-only
fields.
Because attributes have been changed, the MODIFY SCREEN statement is used to write
the header line back to the table.
Modifying the Screen SAP AG
Changing Screen Field Attributes with the Function Field Selection
Maybe you are looking for
-
I've tried syncing with my computer. I've tried almost everything but when i go to update my apps it tells me to give a password for my old aplle ID and won't even take the old password. Help!
-
Can't drag mp3's from itunes library into iphone 3G S
My entire itunes library has been synced with my iphone, however, I cannot remove any of the songs that were automatically synced; when I click on the iphone library in itunes it is all grayed out. Also, I cannot drag songs into my iphone library. I'
-
Hidden element overlaps text when link is clicked to unhide div tag
I am using Dreamweaver CS4 and using the slide effect. When the page loads, the div is initially hidden with (disolay:none). But when i click the link to show the content, the content is displayed but it overlaps the table beneath it. I am using 4 c
-
Trying to install Photoshop Elements 13 - I'm getting an "Exit: 34 code" failure. Adobe Tech support promised 2 weeks ago to research and resolve; nothing done.
-
How to reduce size of time machine partition?
I have a hard drive which is rapidly filling up with TM backups going back 3 years. I would like to reduce the allowable size of the partition without losing the latest backup. How do I do that. Thanks Henry