Master Template, How To?

Hi,
I have large document, I've created two different masters, one with a logo at the top the other without. When I create a new page inbetween other pages, how do I get it to change all pages after it to the correct master automatically. It's setup as single pages, using InDesign CS3 on Mac.
Basically so it always goes, logo page, no logo page and so forth.
Hopefully this makes sense.

You can use the Apply Master to pages command from the panel menu. Select the pages first and the numbers will be in the dialog already.
But this won't maintain an automatic pattern.
I don't see making the switch as being that hard, though. Just pick one of the masters and convert to two pages. Copy everything from the other master and paste intothe second page, then delete the second master. File > Document setup aand check the Facing pages box.

Similar Messages

How to install downloaded free master templates in FCP 7?

I have downloaded some free "master templates to create lower thirds in FCP 7. I can open them one by one in FCP, but I can't install them into any specific folders of my MacBook OS (so that they can be accessed directly from FCP 7 browser or short cuts). I could not find - Library - Application Support - Final Cut Studio - Motion - Templates. Could any one tell me how to install them?

What do you mean previewed, do you mean the small preview window in Final Cut’s Master Templates browser or the rendering on the timeline itself?
If it is the rendering the following link contains a short tutorial on a few things you may do to speed up renders in motion: http://motion-master-templates.com/free-templates/reflective-flooring-template
It is the second video from the top. Let me know if this helps.
Have a wonderful day
Message was edited by: Deyson

How to apply a master template in a built webI report

Hi Experts,
I have around 60 webI reports already built in WebI (BO 4.0 with BICS conection). Now, my client wish to change the lay out in order to adapt to new visual requirements.
I was wondering if is there any way to apply a master template and minimize the effort because for while the unique solution for this is change the xml file.
Any ideas?
thanks in advance,
Eduardo Moreno

Hi Eduardo,
Master template or Template is npt possible for Webi reports in BO 4.0..

I am having issues placing digital pictures in master templates in FCP 6

Hello everyone, this is my first post but I have been using Mac's for some time now with basically no issues.
I have two major issues:
First off, I am trying to place digital pictures which are enormous in the master template drop boxes, when I do this it cuts off the top and bottom of the image but the image still looks clear. The pictures I am importing are 1200 x 1800 jpg files, and were shot with a Canon EOS 30D. What I did was take all the images I needed and used Motion Pictures from Toast Titanium 8 and made a slideshow which I then exported as a QuickTime movie. I didn't know how to encode it so I used the DV/DVCPRO - NTSC codec and the dimensions were set to 3240 x 2430 since I thought that should give me the best quality image right?
Anyway, after doing this I have imported this QuickTime movie into Final Cut Pro and then I cut it up and placed little clips into each drop box. This makes it so I can see the whole picture now, but it still is not as high quality as the original pictures.
So, I have tried many times to export this master template with the pictures in the drop boxes and the finished QuickTime file looks terrible. I have not changed anything in the settings and when I export the quicktime movie I keep all the settings the same.
What do I need to do to get this to look better? Any ideas?
The other thing is that I have noticed a big reduction in quality from when I have the unrendered master template with the digital images in the drop boxes to when it autorenders after I have been away from the computer since I am stressing from this.
I am trying to take these pictures of high school basketball players and use the master template to have all the players pics and names come flying on the screen before the game comes on.
Any ideas? Why is the quality so bad? Am I doing something wrong? I have searched throughout the forums and found little information for digital images being imported into master templates, and I do not know if I am using a lossy format or something?
Any help is extremely appreciated!

First off, I am trying to place digital pictures which are enormous in the master template drop boxes, when I do this it cuts off the top and bottom of the image but the image still looks clear. The pictures I am importing are 1200 x 1800 jpg files, and were shot with a Canon EOS 30D. What I did was take all the images I needed and used Motion Pictures from Toast Titanium 8 and made a slideshow which I then exported as a QuickTime movie. I didn't know how to encode it so I used the DV/DVCPRO - NTSC codec and the dimensions were set to 3240 x 2430 since I thought that should give me the best quality image right?
Digital pictures are no different than any other still images, or movies, for that matter, as fas as Motion or FCP are concerned, they're just pixels.
Your image are way too big for video. Even if you're doing high def, you're scaling them down to fit many on the screen. Thye don't need to be an larger than, say, 1k on the long side.
You blew them up by a factor of 300% to get them out at 3240 x 2430 so now you've made all the pixels bigger than they used to be, you haven't added any pixels. Now you're biring that huge movie into FCVP and scaling it down by a factor of about 90%, wasting huge processing time and muscle and tons of disk space, totally wasted, and every scaling operation has introduced tons of artifacts.
Throw it all ways. Batch your photos through Photoshop to change them all into 1k jpegs and start over.
The templates are fun places to start but the mattes are (mostly) designed to crop and scale. so if you have images that are huge, they just get scaled to fit. You want to start with an image that requires the least amount of scaling.
Welcome to the family. Video is hard.
bogiesan

Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

So here's what I've got: one of the first gen Intel Macbooks with 2gb RAM, running a fresh install of FCS2, fully updated. I pulled out my external with my project on it (saved in the same version), that I keep my demo reel updated on. I've always used the motion text master template files to label each clip and for some reason, this round the text isn't appearing. Let me be clear just how weird this is: the template file will show up in the viewer, but any file set in this sequence will be blank. If there is any graphics to the file, IT shows up, but not the text. I opened up a new sequence and and first added a new master file to it, and it showed up on that sequence. I then went to the old sequence and copy/pasted the clips in it to the new sequence and the text shows up as well. What is up with the original sequence that is causing this issue??? Any thoughts? (unfortunately, my copy of Final Cut is a "Not for Resale" (NFR) so I can't call in for support.
Thanks in advance!!!

Hi Miro,
I was just experiencing a similar problem today. In my situation I was getting the diagonal lines and the new project wasn't actually being trimmed, it was the same size as the original with all of the media from the original project .
It turns out that even though I was selecting 3 specific sequences out of 20 the Project Manager was ignoring that selection, it brought over those 3 sequences but all of the media from the other sequences. I think this is what was creating the problem.
The trim unused media box (or whatever the check box says) was greyed out.
My solution was to create a new clean project and import the 3 sequences I wanted to create a new trimmed project from.
Then using the Project Manager everything worked as expected, the project was trimmed down and there were no diagonal lines. I unchecked the "rename media" option, not sure if that was necessary part of the solution.
This seems like a bug to me, we shouldn't have to create a new project, it's an extra unwanted step and clutter on our systems.
Hope that helps!
I'm on Mac 10.8.5 and Premiere 7.0.1, eagerly awaiting to update once the bug fixes to the bug fixes are fixed.
Gerry

Can DW apply a 'master' template ACROSS sites?

Hi,
I'm using DW8.02 to manage several sites.
While each site does have its own 'local' template in the
Templates directory, I want to implement the idea of a 'master'
template that applies to ALL sites. This master template will
contain stuff common to ALL my sites, and each individual site's
template will be nested within this master template.
What I'd really like to be able to do is to define this
'master' template once only (in one of my sites) and have it update
ALL sites (not just the one I've defined it in) when I change it. I
can't find a way of doing this -- does anyone know how to, please?
The problem I seem to be having is that DW seems to treat different
sites completely separately, and that there seems to be no notion
of considering other sites during template updates.
(I know I could have a duplicate copy of the 'master'
template for EACH site, but then I would have to update it in
several places whenever there are changes!)
Many thanks in advance, and I hope someone has an idea about
how to do this!
Kind regards,
Nick

> What I'd really like to be able to do is to define this
'master' template
> once
> only (in one of my sites) and have it update ALL sites
(not just the one
> I've
> defined it in) when I change it.
You cannot.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"nheaps" <[email protected]> wrote in
message
news:ecvca4$19m$[email protected]..
> Hi,
>
> I'm using DW8.02 to manage several sites.
>
> While each site does have its own 'local' template in
the Templates
> directory,
> I want to implement the idea of a 'master' template that
applies to ALL
> sites.
> This master template will contain stuff common to ALL my
sites, and each
> individual site's template will be nested within this
master template.
>
> What I'd really like to be able to do is to define this
'master' template
> once
> only (in one of my sites) and have it update ALL sites
(not just the one
> I've
> defined it in) when I change it. I can't find a way of
doing this -- does
> anyone know how to, please? The problem I seem to be
having is that DW
> seems
> to treat different sites completely separately, and that
there seems to be
> no
> notion of considering other sites during template
updates.
>
> (I know I could have a duplicate copy of the 'master'
template for EACH
> site,
> but then I would have to update it in several places
whenever there are
> changes!)
>
> Many thanks in advance, and I hope someone has an idea
about how to do
> this!
>
> Kind regards,
>
> Nick
>

Master Templates in FCP all gone Black

The Master Templates (under Effects) in my FCP have all gone Black.
But everything else under Effects are ok.
What happened and how to I revive the Master Templates?

Thanks for the link but it hasn't solved our problem.
We had to reload our software two weeks ago and that's when the problem started. We've done all the updates and trashed preferences but still black frames. Most of the past discussions end with users having no resolution.

FC Studio 2 - Effects Master Templates

Gang, a little help on how to use the new Master Templates in FCStudio2 such as the 3D Text Projects, Blocks, Fire, Water, etc. If there's a video tutorial some where this would be cool. Thanks.

I do see the drop zone clip icon, and yes I have dropped several different video clips in it. The problem is that I see no effect when I play back the clip in either the viewer or from the timeline in the canvas. It's as if the effect isn't working at all. All I get is a white screen.

Can I load FCP 7 without master templates loading?

Master Templates are causing 10 min start up times. How do I either move them to a location where they won't load on startup or is there a way to disable them from loading while keeping them there for Motion to find? And yes I added a bunch of custom ones as well some time back from various freebie sites. Thx

Thx, yup that was it. Back to 30 sec startup. I had over 10 gigs of template stuff. I don't know if this was from when I dabbled with X over the Summer or what. But a huge thx, I kinda figured that was the only real solution, just didn't know I could keep them in the FCS folder.
Message was edited by: TimeKoder13
Heck everything is spiffier now. The interface itself feels like a new sports car now. It had gotten sluggish at some point and seeing how I've been in and out of the hospital the last year I couldn't pinpoint when. No more spinning balls and the menus open immediately. Wow!!!

Master Templates content

Im getting to grips with the new Master Templates in FCP6 and have a problem where the templates appear with what looks like unrendered white/red checkered layers, even once rendered.
I have my Motion content on an external drive, but I dont think that is an issue because the templates work fine in the Motion application.
Any ideas on how to get rid of the checkered layers???
Thanks
Nev

If someone is struggling with the Templates like me, you can workaround it using Reusable Content.
Edit Wiki Page -> Insert -> Reusable Content -> More Choices -> Open List -> New Item / Edit Items
You can create Templates here for detailed Wiki parts .
Be carefull when creating new Content, there is a option for read only / editable Content.

Custom display template - how to add anothe display template for refimement item?

Custom display template - how to add anothe display template for refimement item?
I add a new filter_default_custom.html file and want to create new refinement item display template to point to it
keren tsur

Not 100% if I understood the question, but if you uploaded your template to the Master Gallery and the corresponding .js file has been created, you can open the refinement config panel and specify the result type you want to map to your custom template.
http://www.eliostruyf.com/part-1-create-first-search-refiner-control-template/
Kind Regards
Bjoern
http://www.sharepointviking.com
Twitter: Follow @bjoern_rapp

Master Template

Hi Friends
Can any one please guide me Calibration Master Template with QM flow because here PM module is not implemented.
Thanks & Regards
Gajendranath

hi
Gajendra
I will tell you in brief about how QM calibration is related to PM.
we have 14 inspection type which is used for calibration purpose.
A equipment is created as Equipment master IE01.
Scheduling is done through IP01 for which you have to create a task list in IA01 or IA05.
on QM you have to use sampling procedure with plant maintenance with inspection points for plant maintenance in task list(IA01 or IA05)
A Maintenance order in IW31 gets create which in turns create inspection lot 14 type in background.
Refer following link
Re: QM-TEST EQUIPMENT MANAGEMENT & CALIBRATION
Regards
Sujit

FCP 7.0.3 Crashing/Not responding while importing master templates

Hi
I have Apple Motion 4 , Apple Motion 5 and Final Cut Pro 7.3.0 in my old mac mini. All were working fine (Not sure about FCP7).I recently installed some Master Templates (Motion 4 & 5) under username1. Now when I try to drag and drop master template to FCP timeline its showing the spinning wait cursor..and its not loading anything even after one hour.
One interesting thing is FCP master templates are working fine without any issue in other logins like username2.
I would like to mention some points here
1. Motion 4 installed under root folder so it will be available for all users
2. Motion 5 installed under username1 so it will not be available for others
Is there a solution for this issue..i tried trashing preference and all..but no use.
Pls help me
Thanks,
Praveen N U

http://www.digitalrebellion.com/promaintenance/
Has a crash analyzer. Pretty sure there's a free demo
And delete your preferences
https://discussions.apple.com/docs/DOC-2491
and here are some other troubleshooting tips
https://discussions.apple.com/docs/DOC-2591

Vendor Master Management - How to make 'Corporate Group' field an autoupdat

Vendor Master Management - How to make 'Corporate Group' field an automatically updated field
Frnz,
I am doing a Spend Analysis and thereby restructring some aspects of SAP and business processes. One of the intiatives is to leverage the 'Corporate Group' field in Vendor Master for getting the consolidated spend visibility at the corporate group level of vendors. So far this field wasn't been used to effect. I can update it manually, but the question remains is how do I do with the change management of the corporate group of large vendor base in the scenario of everhappening Mergers and Acquisitions. Are there any alternatives anybody can suggest ? (Like linking D&B numbers etc)
Thanks in advance for your suggestions..

Hi Shiv,
Let me elaborate the purpose of using this field. I want to have a consolidated spend visibility across a corporate group which has multiple vendor codes. Its difficult everytime to group the spends of these vendors manually especially when the number of vendors are too high. Also sometimes the names of vendor companies may not indicate that these are from same corporate group but in fact they could be. In order to have the reports generated on corporate groups, I must maintain this field in vendor master or a Z table. But the problem here is, it should be possible to update this field as and when there are any mergers or acquisitions at vendor side and the corporate group of a particular vendor gets changed due to this. So this has to be effected in vendor master or Z-table automatically. I do know that there are certain agencies like Dunn & Brad (DNB) which provide possibly the details on corporate group of a company but its not fully effective for Indian Vendors as its not mandatory on them to have DNB number & also its a disconnected process and I was looking to connect it seamlessly to Corporate Group field so that I need not bother to update these things manually everytime. I also wanted to explore various possibilities of doing this.
I hope I have spelled it out correctly.

When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed. But importing them results in no control over my template How do I get my chapter into my template without copying

When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed. But importing them results in no control over my template How do I get my chapter into my template without copying?

Try just Opening the Word .doc from within Pages and see if that gets closer to what you want, then copy the chapter you want from the Pages version.
Peter

Master Template, How To?

Similar Messages

Maybe you are looking for