Master Templates come out white

Hi FCP editors,
I am having trouble in adding Master Templates into my project. I was able to do it before I re-installed FCP for another error. I go to my effects tab, go to master templates, choose one loads in the viewer and I get a white screen. I add it to my timeline and I still see the white screen before and after I render it. I also tried going under the sequence pull down menu and choose, "add master templates" here I see the templates and when I try to add the one with the correct settings for my project, I still get this annoying white screen.
Has anybody else had this problem?
WHAT CAN I DO TO FIX IT IN POST? Are some of my settings messed up? I tried deleting the user preferences folder therefore re-setting it to default setting.
Can someone please help me out?
Thanks,
Scott

ok... it´s a update!
if you bought 6 and updated to 6.0.4 it´s an update, correct?
there are several updates from 6 to 6.0.3, and if 6.0.4 is out there should be more!
alessandro, don´t get me wrong... read the post(s) and then reply to them,
"During certification i had this problem in a MAC because we´ve updated QT with version 6.0"
i said that!
I had other problems than white... they would not load at all, for me worked uninstalling FCP, install the new version of QT and then install FCP again (and update it)
Can you open some templates in Motion?
Can you open other templates in your computer (Livetype / Motion / ... - fcp studio 2)
You said:
"re-installed FCP for another error"
What was the error?
Are you reinstalling app´s because of errors?
Hum...!?!
You should se what you´re doing with your FCP2 and other app´s!
I´ve installed and formated my macbook once in one year and since then no updates or "extra programs", i use it for work... you should now what you´re doing with your mac! Update sometimes is a risk, QT 7.3 (for exp) was a flop and caused a lot of problems, if you need to finish a work the last option is to "downgrade" your software, use the original one (v6) and stay there... finish the work and then play with your app´s!
HBars

Similar Messages

  • Final Cut Studio 3 installed - and in FCP and Motion, video comes out white

    My system meets all the requirements, I've got QT 7.6.4 (and it is pro registered). I did a fresh install of FCS3. When I load anything into an FCP project, the audio plays but video just comes out white (with the exception of an mpg I tried bringing in that did show properly). Also, in Motion, when I load a template, it shows drop zones but all of the graphics are not visible, even when going into "layers".

    The video is QT clips and FCP movie (QT exports) from previous work in older versions. It does play fine in QT, so that's not the problem. I also checked and indeed RGB is selected, so it's no an alpha problem.
    When I import an mpg, it shows fine in the Viewer. When I import a jpg picture into a new project, it shows as a multicoloured rough image. Video clips just show as white. If I drag that jpg down to the timeline, it shows as White in the Canvas.

  • Master Templates are ALL WHITE

    When I go to load a Master Template in FCP. The template just loads as a white screen. Anyone else having this problem?

    duplicate post from CINEARTISTS
    duplicate post from JR
    another duplicate post from JR
    Any plugins installed?
    Remove them and see if it helps as it has for others in similar situations.

  • Sometimes I take a photo on 4S and it comes out white with no picture.

    Sometimes I take a photo from my 4S and even with removing the cover, the photo still appears blank - a white screen.
    Anyone can advise why this is happening?

    Hello rebeccay1,
    Thanks for using Apple Support Communities.
    It's hard to say exactly what is causing the issue without doing any troubleshooting.  The article below has great troubleshooting steps to go through in order to resolve this issue.
    Camera
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Take care,
    Alex H.

  • Colours come out as white when rendering?

    Hi everyone,
    I'm new to AR and was wondering if someone could help me out with this problem? I've made a composition that uses the "shift channels" effect to get colour aberration for my text. The three colours are of course red, green, and blue. Everything looks fine when I'm editing, but as soon as I render the video (I've tried H.264, Custom RGB, Alpha only etc.), the three colours for my text come out white. This is only a problem for the "colour aberration" portion of the video. It would be great if someone could help me out.
    Thanks

    This is what I mean... Still can't tell a single thing about your project. Dont' worry about the size of the screenshot, just give us some info.
    http://forums.adobe.com/message/5755690?tstart=0#5755690
    Notice how I'm showing all the pertinent information. You can completely duplicate my comp by just looking at the screen shot.
    Seeing that you have blend modes set to ADD it's possible that you have the composition set to Ray-traced rendering.
    If so, that would cause the problem because you didn't read the warning that pops up when you enable Ray-traced rendering about blend modes and effects.
    I've re-created a comp that works in 3D. It looks like this:
    By simply pressing the u key twice I've revealed everything that anyone would need to know about the composition. It makes it very easy to find the problem.

  • How to install downloaded free master templates in FCP 7?

    I have downloaded some free "master templates to create lower thirds in FCP 7. I can open them one by one in FCP, but I can't install them into any specific folders of my MacBook OS (so that they can be accessed directly from FCP 7 browser or short cuts). I could not find - Library - Application Support - Final Cut Studio - Motion - Templates. Could any one tell me how to install them?

    What do you mean previewed, do you mean the small preview window in Final Cut’s Master Templates browser or the rendering on the timeline itself?
    If it is the rendering the following link contains a short tutorial on a few things you may do to speed up renders in motion: http://motion-master-templates.com/free-templates/reflective-flooring-template
    It is the second video from the top. Let me know if this helps.
    Have a wonderful day
    Message was edited by: Deyson

  • Final Cut Pro 7 Master Templates are white!

    I can't get Master Templates working in FCP 7. I see the templates if I browse them, I can load them up in Motion no problem. But if I try and view them in the viewer, or add them to the timeline, they come up white. I have uninstalled and reinstalled FCP 7 3 times today now, and can't seem to figure out why this feature doesn't work. I've trashed preferences, everything I can think of. Anyone else having this issue?

    After upgrading from FCS2 to the current studio, All video placed in Final Cut Pro or Motion shows up as either black or white, sometimes with a few small color artifacts- as if the contrast had been turned up to maximum. This issue affects even the bars and tone generator in Final Cut Pro. Audio is unaffected.
    I removed all installed files and receipts and reinstalled, issue is still occurring. I've also updated to 10.5.8 and run Final Cut under another user.
    This issue is occurring on an iMac Intel Core 2 Duo. I have a fresh install on my Macbook Pro which is running without any issues.

  • Why does a black and white picture come out with a tint?  iPhoto, Canon

    When I print a black and white picture from iPhoto, it comes out with a tint.  How do I prevent that? iPhoto, Canon MX310

    Hey neil293,
    Thanks for the question. If I understand correctly, when you print a photo in iPhoto it has a tint. I would recommend that you read this article, this article explains how to adjust the tint in a photo. 
    iPhoto '11: Adjust exposure, contrast, colors, and other qualities
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • I am using the trial version of pages. how do i transfer the letter heading i have created to Word as a template? comes out fuzzy in Word when i try.

    i am using the trial version of pages. how do i transfer the letter heading i have created to Word as a template? comes out fuzzy in Word when i try.

    IP = Intellectual Property.
    You want to take the artwork from Pages, which you haven't paid for, into a competing product?
    Peter

  • When will a white ipod touch come out?

    when will a white ipod touch come out?

    Noone really knows, Apple keeps it's secrets very close, although it's rumoured that iPT5 will have a white edition.

  • When did the white ipod touch 4 come out?

    When did the white ipod touch 4 come out? Anyone know?

    KT_Beast wrote:
    well cause somebody said that ipod touch 4g is the last ipod touch !
    and you believed them? Why?

  • What to do about white, whispy smoke coming from slot where paper comes out?

    After a false paper jam message (the paper was sticky from humidity and only partially left feed tray), the printer prints fine, but thin, whispy white smoke comes out with the printed sheets. I don't know if it has a smell as I have little sense of smell.
    Help!
    Printer is a Laser Jet 1020 bought in 2004
    This question was solved.
    View Solution.

    This is likely water vapor (steam) from humid paper and not a cause for concern.  See the page here for information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • When will white ipod touch come out?

    I just came from the nyc 5th ave store and couldnt find it so i asked the lady and she said dont have it yet. when will it come out? i saw the presentation and the guy said the 12th i also saw on apple website the 12th also so when will it come out thanks so much!!!!

    Hec23 wrote:
    I just came from the nyc 5th ave store and couldnt find it so i asked the lady and she said dont have it yet. when will it come out? i saw the presentation and the guy said the 12th i also saw on apple website the 12th also so when will it come out thanks so much!!We
    Well, like Patrick Copeland said, if it (website) said it came out the 12th, then it must have. One thing you might want to think about is this: shipping takes time. What if it's available the 12th, but not in most stores yet?

  • I am having issues placing digital pictures in master templates in FCP 6

    Hello everyone, this is my first post but I have been using Mac's for some time now with basically no issues.
    I have two major issues:
    First off, I am trying to place digital pictures which are enormous in the master template drop boxes, when I do this it cuts off the top and bottom of the image but the image still looks clear. The pictures I am importing are 1200 x 1800 jpg files, and were shot with a Canon EOS 30D. What I did was take all the images I needed and used Motion Pictures from Toast Titanium 8 and made a slideshow which I then exported as a QuickTime movie. I didn't know how to encode it so I used the DV/DVCPRO - NTSC codec and the dimensions were set to 3240 x 2430 since I thought that should give me the best quality image right?
    Anyway, after doing this I have imported this QuickTime movie into Final Cut Pro and then I cut it up and placed little clips into each drop box. This makes it so I can see the whole picture now, but it still is not as high quality as the original pictures.
    So, I have tried many times to export this master template with the pictures in the drop boxes and the finished QuickTime file looks terrible. I have not changed anything in the settings and when I export the quicktime movie I keep all the settings the same.
    What do I need to do to get this to look better? Any ideas?
    The other thing is that I have noticed a big reduction in quality from when I have the unrendered master template with the digital images in the drop boxes to when it autorenders after I have been away from the computer since I am stressing from this.
    I am trying to take these pictures of high school basketball players and use the master template to have all the players pics and names come flying on the screen before the game comes on.
    Any ideas? Why is the quality so bad? Am I doing something wrong? I have searched throughout the forums and found little information for digital images being imported into master templates, and I do not know if I am using a lossy format or something?
    Any help is extremely appreciated!

    First off, I am trying to place digital pictures which are enormous in the master template drop boxes, when I do this it cuts off the top and bottom of the image but the image still looks clear. The pictures I am importing are 1200 x 1800 jpg files, and were shot with a Canon EOS 30D. What I did was take all the images I needed and used Motion Pictures from Toast Titanium 8 and made a slideshow which I then exported as a QuickTime movie. I didn't know how to encode it so I used the DV/DVCPRO - NTSC codec and the dimensions were set to 3240 x 2430 since I thought that should give me the best quality image right?
    Digital pictures are no different than any other still images, or movies, for that matter, as fas as Motion or FCP are concerned, they're just pixels.
    Your image are way too big for video. Even if you're doing high def, you're scaling them down to fit many on the screen. Thye don't need to be an larger than, say, 1k on the long side.
    You blew them up by a factor of 300% to get them out at 3240 x 2430 so now you've made all the pixels bigger than they used to be, you haven't added any pixels. Now you're biring that huge movie into FCVP and scaling it down by a factor of about 90%, wasting huge processing time and muscle and tons of disk space, totally wasted, and every scaling operation has introduced tons of artifacts.
    Throw it all ways. Batch your photos through Photoshop to change them all into 1k jpegs and start over.
    The templates are fun places to start but the mattes are (mostly) designed to crop and scale. so if you have images that are huge, they just get scaled to fit. You want to start with an image that requires the least amount of scaling.
    Welcome to the family. Video is hard.
    bogiesan

  • Master Templates is crashing FCP 7, In Maverick

    I just updated my iMac from Lion to Maveric. I was very disapointed that all the Master Templates HD are crashing FCP 7. Its amazing that Apple did not fix this issue with FCP7 upgrade. To get FCP X is out of the question.
    Is there a solution thanks.

    Have you tried trashing your FCP  Preferences? This is a common first step when you get unexpected performance from Final Cut Studio components.
    You can download Preference Manager from Digital Rebellion (free) and it will do it for you:
    http://www.digitalrebellion.com/prefman/
    Your preferences will be reset to default settings the nest time you launch the applications.
    MtD

Maybe you are looking for