Master Vs Transactional

How do I distinguish between a master and a transactional table by just looking at the technical name in SAP R/3?
Thanks

This is not possible !!!
Bye,
Roberto

Similar Messages

How to use ale/idocs in sap crm to transfer master and transactional data

hi all,
I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
pls help..
regards,
kavita chaudhary

Kavita,
In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
You can extend the standard XIF IDOCs using Transaction BDFg as well.
Thanks,
Ravi

To put a new button in std Device master data (transaction IQ03)

Hello Experts,
Can you tell me how cqn i add a new button in the Std Device master data,transaction IQ03,IQ02 etc.
I got an exit menu exit +ZUD and function exit EXIT_SAPLIPW1_003 but dont know how to use it.
is there any customising where i can make the button visible in the transactions.
Regards,
Bigy

Hi Iulia,
I created implementation for the Badi EQUI_SCR_03. This is will bring up
a new tab in the Device/Equipment master.
You can check in system E5M/300.
I Implemented methods : INIT_SCREEN, PUT_DATA_PBO.
In the subscreen tab of Badi I gave my subscreen name and screen number.
Hope it helps
Regards,
Bigy

Some Master and transaction loads taking long time in R/3 extraction andBW

Hi Experts,
We have some Master and transaction loads which takes long time in source system(R/3) in BW as well in daily process chains.These loads are happening in daily basis.
In Extraction ,they takes long duration to finish.
And then BW also takes much time.....
So pls give some suggestions ,by which we can reduce this duration....
And what can we do improve these loads perfomances......
your small suggestion can improve loads performance......
thanx in advance.....

hi naveen,
go back and have a look at ur infopackage .. for the no of data packets it is picking up for each time ....
this can be done by going to scheduler in the menu and u can find the no of data packets and the size as well....
hope this works ...
snigdha >>>

Import master and transaction data

Hallo,
I need the information, how I can import master and transaction data.
I fellow the introductions from SAP.Help (see Link), but the Programm UPB_DATA_IMPORT
is failed. (See point 3 in Link):
http://help.sap.com/saphelp_nw04/helpdata/en/7a/6d313f8815d036e10000000a114084/frameset.htm
If I want to try point 3. The error massage.
Program UPB_DATA_IMPORT does not exist Message no. DS017
will result.
What I can do? Who can me say why I havent the Programm UPB_DATA_IMPORT?
What is wrong?
Please help me.I need Data to make a demo planning
thanks

Hi,
There is a set of objects in business content (check under SAP DEMO in business content). You can activate some or all of these demo objects (for example demo cubes).
There are programs which you can then execute to create the datafiles which can then be loaded to these demo cubes.
" Start report RSO_BC_FILES_IN_BDS (Transaction SE 38), specify the required (Demo) InfoObject/InfoCube and choose the "Start BDN" button. The system will display all (generally one) CSV files which were supplied with the InfoObject/InfoCube. You can either export this CSV file into a local directory or you can write it directly onto the application server. For loading, proceed as described under section 1. " --- from OSS note 370397

Transfering Master and Transaction data to active and non active versions

Hi Gurus,
I am planning to transfer ECC master and transaction data to APO active and simulation versions.My question is
1. Is it possible to release Master and transaction data to active and non active versions ?
2. How i need to config if i want to release Master and Transaction data in version 001?
Please let me know .
Thanks in Advance
Regards,
Raj

Hi Raj,
1) Once you create active integration models for master data and
transactional data, the data will get updated in active version 000
2) For creation of non active version use transaction
/SAPAPO/MVM
3) For copying of data from active to non active version, use
transaction /SAPAPO/VERCOP
Regards
R. Senthil Mareeswaran.

DP-Master data & transactional data

Hi all,
Can someone help me in differentiating between Master data & Transactional data in Demand Planning (DP) & Supply Network Planning (SNP)..
How do we create both of them in DP & SNP..& how do we use them for Planning.
Regards,
Vishal.S.Pandya.

hi vishal,
Because master data is always loaded before transactional data, ... SAP Advanced Planning and Optimization Demand Planning allows you to forecast your .Assignment of customer requirements to planning product Sales orders (customer requirements) consume the planning products forecast in the planning without final assembly segment. The forecast released from Demand Planning is for the planning product and the forecast consumption of the planning product is carried out whenever a sales order is received for one of the real products linked to the planning product via the hierarchy
see this link
http://datamanagementgroup.com/Resources/Articles/Article_LongWindingRoadToSAPMDM.asp..
Sales & Operations Planning
main process
The continued pressures on performance, including shrinking margins, inventory expense, and pressure to better utilize assets require an evolved Sales and Operations Planning process.
This process now needs to integrate not only the pictures of demand and supply, but to evaluate the effects on the financial plan for the company.
To support this business process, SAP xSOP provides analytic tools as well as process management and data maintenance tools.
Processes such as Demand Planning, Supply Planning and Strategic Financial Planning feed into the Executive S&OP process where the plans are analyzed and adjusted to match the strategic goals of the company.
Demand Analysis and Update The process of analyzing and updating the demand plan provides the most accurate projection of product sales with input and buy-in from sales, marketing, and channel partners. The xSOP tool can be used to show plans from Sales, Marketing and the Demand Planning group along with promotional plans.
These plans can be analyzed from an S&OP perspective and the S&OP demand plan can be updated to reflect the strategic goals.The follow-up process is to balance demand with supply and resolve supply issues.
Generate Demand Plan, Sales Plan and/or Marketing Plan
Load Master Data into xSOP
Load transactional data (plans) into xSOP
Analyze using Demand Analytics

Master data & transactional data

explain the difference between master data & transactional data

Hi Mayuri
master data is a header data it is rarely updated
transaction data is a item data which is always updated..
please close ur previous thread and reward points.
reward points to all helpful answers
kiran.M

TO FIND TABLES FOR MASTER DATA TRANSACTIONS

HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
How can we find the tables for master data transactions.?
please reply...
thanks.

Hi,
I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
Thanks
SK SIDDIQUI

Delete ERMS master- and transaction data

Hi all,
I was wondering if it is possible and if so, how, to physically delete emails. So not only setting some sort of status, but actually delete the emails including the attachments etc. belonging to these emails. Is it possible via a (simple) transaction were one can do a search and delete, or via the WebClient itself, or....whatever.
We're about to quit using ERMS, and as a consequence, we would like to clean up everything related to ERMS like master data, transaction data and customizing.
Kind regards,
Micky.

Hello Micky,
Unfortunately there does not seem to be a good solution for archiving ERMS / Agent Inbox emails that come in via SAP Connect interface. As you probably know, once an email arrives via SAP Connect, the email is converted into an SAP workflow workitem. Once the email is processed from the IC Agent Inbox, the workflow item is completed and the email is converted into an SAP Office document. From what I have heard, there is a possibility to do a "reorganization" in SAP Office to get rid of the SAP Office documents. I have also heard that customers have had success archiving the completed SAP workflow workitems. In case you are interested I think the tables that are used for ERMS related SAP Office documents are SOFM, SOOD, SOC3, SOFFCONT1 (if it is binary data), SOOS, SOST, and SOES (send external).
The issue rather seems to be that there is no possibility to archive the attachments of the SAP Office documents! My recommendation is to store the attachments on an external content management server as described in SAP note 904711. I am aware of a few other obscure reports (e.g., report RSSOAPUT) that are supposed to archive certain types of attachments (i.e., RAW and SCR), but I haven't heard of any customers who have successfully used these programs so I don't recommend them.
Best regards,
John

Hi gurus what is master data & transaction data

hi gurus what is master data & transaction data

MASTER DATA
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
TRANSACTION DATA
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
Regards,

ALE'ing master and transactional objects from DEV to TST to PRD

Experts,
I did see a lot of posts on the same topic but none happened to be answered completely/they do not answer my query.
I am looking for a step by step approach/guide to migrate master & transactional data between SAP environments using ALE/IDOCs
Thanks in advance

Figured it out

LSMW for master data & transaction data

Hello Experts,
We have master data :
1)Material
2)Vendor
and
Transaction data
3)Open PR
4)Open PO
5)Stock Posting
Can we use LSMW for all these?
Or which one is recommended for each one of them...
Whether BDC or LSMW recommended ?
Kindly suggest...
Regards
Mahesh

alternativ you can use standard reports:
RFBIKR00 fpr vendors
RMDATIND for material
RM06BBI0 FOR PR
RM06EEI0
RM06EEI1
RSTXLITF
for PO
and RM07MMBL for material (transaction data)
hope that helps
Andreas

Master Data/transactional Data Loading Sequence

I am having trouble understanding the need to load master data prior to transactional data. If you load transactional data and there is no supporting master data, when you subsequently load the master data, are the SIDs established at that time, or will then not sync up?
I feel in order to do a complete reload of new master data, I need to delete the data from the cubes, reload master data, then reload transactional data. However, I can't explain why I think this.
Thanks, Keith

Different approach is required for different scenario of data target. Below are just two scenarios out of many possibilities.
Scenario A:
Data target is a DataStore Object, with the indicator 'SIDs Generation upon Activation' is set in the DSO maintenance
Using DTP for data loading.
The following applies depending on the indicator 'No Update without Master Data' in DTP:
- If the indicator is set, the system terminates activation if master data is missing and produces an error message.
- If the indicator is not set, the system generates any missing SID values during activation.
Scenario B:
Data target has characteristic that is determined using transformation rules/update rules by reading master data attributes.
If the attribute is not available during the data load to data target, the system writes initial value to the characteristic.
When you reload the master data with attributes later, you need to delete the previous transaction data load and reload it, so that the transformation can re-determine the attributes values that writes to the characteristics in data target.
Hope this help you understand.

DP - Master Data & Transaction Data mapping

Hi APO Gurus,
I need to create a document for mapping APO DP master & transaction data to the fields of a logical modelling DB.
I would appreciate if any of you have any information as to how to go about it or if you have any similar doc, please email me at [email protected]
All your help is highly appreciated.
Regards,
Ritu

Hi ritu,
What exactly is your requirement. Unfortunately I am a functional consultant and not the best person to give technical details. However please note that APO especially DP does not store data in only DB tables (like R/3), instead uses liveCache which is based an OODB. The transactions access data in liveCache through standard COM routines. The SAP suggested way to access data to and from liveCache is through use of BAPIs.
The other point to note is that APO-DP is totally customisable as per client requirement. That is to say while there is some standard business content provided (by way of some characteristics, keyfigures and couple of planning areas) most clients created their own content - starting from characteristics, keyfigures, planning object structure, planning area, planning book/data view etc. As a result it is difficult to give standard field names for mapping.
DP Master Data is actually Characteristic-Value-Combinations (CVCs) that are based on the custom characteristics defined in the Master Planning Object Structure. Transaction data is timeseries data in keyfigures which is defined in the Planning Area. Since all these objects are customisable - standard field level mapping may not be possible.
Hope this helps.
Thanks,
Somnath

Master Vs Transactional

Similar Messages

Maybe you are looking for