Mastering Media Quality - Help please!
Hi, this is a little off topic but we would really value the opinions of other Pro users who master DVD's on Superdrive Mac's with DVDSP. We have increasing problems with DVD-R Masters created over the last couple of years in that when new they duplicated fine in our duplicator but now when we re-visit them to run further copies (using a Siren Technology 1-9 duplicator with Pioneer drives) they are increasingly failing to copy.
Previously we have used Verbatim media but had a bad batch and switched to Fuji. Now both brands of disc are starting to fail after short periods in storage (on a shelf in proper library cases out of direct sunlight, not near moisture etc - next to BetaSP and DVCAM tapes that are lasting far far longer!).
We are getting lots of conflicting advice and thoughts, from people blaming the Powerbook and PowerMac that created the masters to a potential problem with the duplicator and blank media.
So I would really like to know what other semi-pro people use as their mastering media, and is anyone else getting problems with older projects?
I think a switch to some high quality media (I'm thinking HHB) would be a good place to start - any suggestions most welcome! Thanks in advance.
Hi Iain-
Many professionals choose to master down to DLT tape. Many of the large replication houses require this as the master format. The dlt drives are not very cheap, but if you are in a location in which tapes seem to last longer, this may be a better option. However, I still master to dvd-r and have not seen the same type of problems. I use a bravo duplication system and have got consistently even results. I make sure that all the dvd-r masters are stored vertically to prevent warping. It may be advantageous to use good cases as well. We've been using RiTek media for the duplication and even though its cheap it seems to be holding up well. However for the masters out of the computer we use apple blank dvds just to insure maximum compatibility with the machines. Hope this helps!
Justin S.
Similar Messages
-
My finished DVD is always of a poor quality, help please?
(Encore cs5.1)
My finished dvd normally is always:
Very quiet / Poor sound quality
Large black bars at the top and bottom of the screen
Menu doesn't quite fit on the screen (even though it did within encore)
Reduced video quality (pixelated)
Can anyone please help me out the best export settings
to combat these problems?Well the video it's self is generally fine until i put it into encore and it gets transcoded and what not and i was wondering what's teh best transcode / export setting for encore basicly but i've answered your questions anyway
What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
Cs6
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
Yes
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Windows Ultimate 64-bit (Service Pack 1?)
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
usually .avi however i always experiment for the best result, i'm not sure what codec
If you are getting error message(s), what is the full text of the error message(s)?
No error messages
What were you doing when the problem occurred?
well there isn't one
Has this ever worked before?
never hasn't just poor quality after exproting and transcoding
What other software are you running?
well most other Cs6 programs
Do you have any third-party effects or codecs installed?
Nope
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
intel i5 2500k
8gb Ram
1 terrabyte hdd
2 terrabyte external hdd
nvidia gtx 570
guess that's all the important stuff
Are you using Mercury Playback Engine GPU Acceleration?
don't think so but don't know how to check
Does the problem only happen with your final output, with previews, or both?
Generally final output, howver sometimes the previews are off to
I hope that's what you where asking for
Message was edited by: ConnorJoe_97 -
Zen X-Fi Streaming Music from a media center Help Please
Hi,
I just opened brand new Zen X-Fi 6GB checked out it's playback installed Creative Centrale and was ready to test media streaming. Here it is where my frustration started and I hope somebody can help me.
The system:
Windows XP Pro SP3
Antivirus Kaspersky Internet Security 2009 (tried switching off during tests as well);
Windows Firewall switched off;
PC Connected through cable to wireless router Linksys WRT54GX-v2
MAC filtering is off in router
X-Fi obviously connected via wireless. Sofware version on X-Fi: .03.0 ( I know there is newer version, haven't tried that one yet)
Media Server is enabled in Creative Centrale, name to server is given. Instructions on http://support.creative.com/kb/ShowA...aspx sid=52949 have been read, everything seems to be set according to description.
Zen X-Fi finds my Wireless network and connected after I initially entered wireless password. When searching for Media Server, only Creative MediaBox comes up. This proves that Zen X-Fi is able to connect to router and that it talks to media server on internet. However, it does not see my Media Center provided by Centrale. I have also J.Ri'ver Media Center running on another PC at home that also has UPnP server running ( which I tried to switch off and on during tests). Not sure if this inmpact Centrale MEdia Server in any way. I have also found UPnP Enable/Disable option in my router setup, again traid enabling and disabling it, not sure what should be the set up.
I have probably tried to start server 25 times. There were four possible outcomes:
. Finds only Creative Media Box. Happened mostly
2. Gets stuck while searching, nothing happens. Basically have to soft reset to start it again. On/Off does not work. This happened probably 2 times during my test.
3. Once I go back from list of media servers (with only Creti've MediaBox in a list) , and try to hit Media Server again, player freezes. I get almost black screen with little backlight, which can only be seen in dark environment. Again, no other option than to soft reset. This happened 5 times
4 It found Media Server from Centrale as well as my Media Center from J.Ri'ver MEdia Center. This happened once... during my tests. Almost felt like I won lottery... Kaspesky was on during this test, by the way. Connected to Centrale and heard music, it was fine. Could not connect to J.Ri'ver media center, but that is another topic probably.
To summarize. This is not acceptable if I have to try 25 times, with 7 soft resets and hope for one succesfull connection. Certainly there is something wrong and I can't figure it out. Can you please help meSame problem on my laptop at work, at home it just hangs looking for media server. The media server name shows up in my network devices. I turned off my firewall, etc.
I can't believe there's no response yet, I just emailed customer support. -
Titles and Photo Quality - help please
I have created a movie for work in iMovie.
Exported to .DV [full quality] (i tried other formats but .DV gave me the best viewing quality - nearly perfect when viewing with QT Player).
I take this .DV file and load it into iDVD with another movie and form a menu with them. The DVD menu looks great (sharp). However when you play the 2 movies the quality of the video has degraded. How did i lose this quality going to iDVD?
Mostly, it is just my sub-titles that appear more fuzzy. I would like to be able to keep them as sharp and clean as possible for viewing on TV.
Does anyone know and can explain how to keep my sub-titles to as best quality as possible?
The movies are 3 minutes and 5 minutes. I used Professional Quality on iDVD.
Thanks for any help.Yes
There seems to be a problem when going from iM08 to iDVD. Work around is described as:
(not tested full out)
One must open the iMovie movie project with QuickTime (probably -pro)
Not really sure how - most probably exporting as full quality or if using
iMovie 1 - 6 open the project (ctrl-click and Show content of package)
Then when it is opened in QT show info and select the small box "full/high quality"
Next save and close.
Not tested this though I still stay in iM6 or FCE/P.
But this behaviour (or very similar) is described in this forum.
AND - try to do a DiskImage instead of burning away DVD discs. Cheaper.
(Down in the File menu)
Yours Bengt W -
Adobe Media Downloader Help Please
I've needed to restart my download many times which wouldn't be so bad if I could continue from where it left off. I have 40,000 files and each time it's after more than 24 hours of downloading (over 7000 successful downloads), it boots me off to the sign in screen. I'm getting really frustrated but want to archive my files while photoshop.com is still available. Please help. Are there any other options besides individual downloads? I have too many files to do that. This downloader has been running all week and I only get through about 25% each time. Please help?
Hello,
To investigate this further :
Can you send me the Log.txt placed here
WIN : C:\Users\<Username>\AppData\Roaming\com.adobe.px.Downloader.<some-number>\Local Store
MAC : /users/<username>/Library/Preferences/com.adobe.px.Downloader.<some-number>/Local Store
You can send the log file to [email protected]
Regards
Amreek -
<PRE>Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DR012 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\RABBI_~1\AppData\Local\Temp\{4F15139D-81FC-4E9A-92EE-1FE3DF3E3613}\Flash_Profes sional_14_LS20\Adobe Flash Professional CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Adobe Flash Professional CC 2014 14.0.0.0 {AA704223-E11C-11E3-8A38-C09A633B72AF} -----------
ERROR: DR012: Check for Registry permissions. (Setting Registry Value Failed. Error 5 Access is denied.)(Seq 153)
</PRE>ChaosKeetonie the Microsoft Visual C++ 2012 Redistributable Package (x64) component of your operating system has been damaged. I would recommend following the recommendation of the error message, "download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com."
You can download the redistributable at Latest Supported Visual C++ Downloads. -
DynamicLink Media Server is not available. I can't open any video file in Photoshop CC and when it does, Photoshop freezers and I can't do anything else. I'm using OS X 10.9.4-3.1 GHz Intel-16 GB DDR3. Any help please?
Indicas que no puedes abrir ningun archivo de video, se supone que has probado varios formatos, mp4, mov,..
Has actualizado el OSX a 10.9 ?, funcionaba antes? La versión de Photoshop es la CC, no la CC 2014?
En el menú de Ayuda>Actualizaciones, cual es el resultado, dice que esta al día?
Tienes abiertas otras aplicaciones?
Prueba a cerrar todo, espera media minuto y abre Photoshop a ver que ocurre.
(Estas utilizando un MacBook Pro?) -
My media is not being recognized by Final Cut! HELP PLEASE!
My media is not being recognized by Final Cut it was there yesterday and today it is not recognized by FCPX
it looks like this now>>> but it is I cans see it in Finder and Quicktime? HELP PLEASE!That's a compound clip. Not sure what you've done, but that's not a clip icon. Where did this media come from? How did it get into your computer? Is it really HDV? Was it captured using FCP?
-
In Data Quality transform please explain Associate transform with the help of any example.
In Data Quality transform please explain Associate transform with the help of any example.
Hi Neha,
If we are using multiple match transforms and consolidate the final output we will use associate transform .
Let me explain with one example based on data quality blue prints for USA .
We have customer/vendor data . We need to find the duplicates .
1. First we will find the duplicates on Name and Address
2. Second we will find the duplicates on Name and Email
3. Third we will find the duplicates on Name and Phone
Here why we need to find the duplicates in multiple stages . If we are finding the duplicates on combination of Name, Address, Email and Phone we may not get proper duplicates as we are finding the potential duplicates . That's why we are finding the duplicates on different combinations .
In this case we will get the different group numbers for each match combination . Each combination name is there .
We want to consolidate and give the group number to the whole set of duplicates . We will pass these 3 match groups to associative transform and generate the consolidated match group for the input data.
I hope you understand the concept .
Thanks & Regards,
Ramana. -
Hi, Im trying to convert a PDF into a weblink that I can post onto social media but dont know how, can you help please?
You need to upload it to some kind of public server, or file-sharing site (like Google Drive, Dropbox, etc.), and then post the link to it.
-
New iTunes on Mac doesn't allow me anymore to select all songs and 'Get info' to adjust the volume, like the old one. It says"your selection contains more than one type of media". They are all songs! Help please!
Raya Alfa wrote:
...there are some that are mp3 and it will be extremely hard to pick them from the lot.
Not true. Select "Kind" as a sort category by right clicking the headings
Then click to sort by Kind
If your Import Settings are for Apple Lossless, AIFF, AAC or whatever the majority of your files are, convert MP3s to that file type.
I've presently got 17,000+ files in my library, and they're ALL MP3 or M4B(Audiobooks). If they weren't when I got them, I converted them. Saves a LOT of hassels with just this type of situation. Besides I have two non Apple MP3 players that WON'T work with other file types besides MP3 so, EVERYTHING I have has to be MP3. -
We're having an issue with a couple of users who cannot access the Recordings section of the Calabrio Quality Management web interface. Other users can login and view Recordings just fine and they seemingly are configured the same. Here is what the failed user experiences:
1) User logs in to Calabrio Quality Management (Separate Logins) via the Cisco Unified Workforce Optimization page.
2) User clicks Recordings button on the top part of the page
3) After accepting a couple of Java Security prompts and enabling pop-ups, it just hangs on the following prompt:
Initializing Media Player Applet, Please Wait...(This may take several minutes)
What's odd is that on the same PC, I will log in with another user that is known to work, and they can access the page with no problems.
Here are things I have tried to rectify the problem but have not succeeded:
- Tried on IE 8, 10 and 11, Firefox, and Chrome
- Cleared Java Temporary Internet Files
- Checked users permissions Under Quality Manager Administrator
- Validated PC settings (where the login is), all checks have passed
We are running Calabrio One Quality Management 9.0.1.57.
Any ideas?
Thanks,
JohnHey all,
I spoke to Calabrio Support and this is a known issue with all versions of QM to date. The problem is when sometimes user searches are too big. The QM C1 auto-executes the most recent search and will cause the page to never load.The fix as follows:
1) Log into the Windows Server that has the QM Software installed.
2) Open "Quality Management Administrator" and log in. Expand 'Site Configuration', then click 'System Database' to find the SQL Instance Hostname/IP. You'll need it for Step 4.
3) On Windows, Click 'Start >> All Programs >> Microsoft SQL Server 2008 R2 >> SQL Server Management Studio'
4) SQL Server Authentication. Input the following:
Server Type: Database Engine
Server Name: <SQLInstance>\QM
Authentication: SQL Server Authentication
User: sa
Password: *********
Log in.
5) Expand 'Databases'
6) Right-click the database 'SQMDB', then click 'New Query'
7) Enter this command:
delete from Search where name='recentsearchforsystem'
8) Click Execute
9) Log into the Web interface again and test and verify access to Recordings is now working -
Help please -My HQ photos are being rendered in very poor quality in iMovie
Hi there
I have a problem I cannot solve in iMovie (HD 6.0.3).
I am making a movie/slideshow of photos using very high quality photos imported from Aperture. I'm finding them incredibly BAD quality when it comes to the rendering of finished product, the most obvious problem being the pixellation (seen as wavy lines) when the Ken Burns effect is used. It looks the worst on a plasma television, which it is being made to watch on.
I have burned it at the highest quality I can find, but there is still no improvement. Can anyone help please? I'm doing this as a gift for my parents, but don't want to send them something of inferior quality.
Thanks!
Carlyif you've burned it to DVD, then its probably a standard definition iMovie project which means that is 480 lines interlaced. it makes no difference how high quality the originals are, they'll still be re-sized down to 480 lines and since its interlaced, that means that you're only ever showing every-other line. and because standard definition alternates between the odd and even numbered lines, you'll probably see lots of shimmering in the highlights. it will look worse when you try to stretch it across a high-definition TV because there's interpolation going on to up-convert the whole thing back to the 720 or 1080 lines of high definition.
in short, you'll never really get super-high quality from a standard definition TV and you'll only get good results on a high-def TV if you keep everything high def (720p or 1080p) throughout the entire workflow. and until Apple updates its software to handle Blue-Ray or HD-DVD authoring, it'll be very expensive to master those kinds of discs!
best of luck,
scott
PowerMac G5 2.5GHz Mac OS X (10.4.8) MacBook Pro 2.0GHz -
I have a Bose soundtouch system .Until today I could play my iTunes music through it via air player . .I have just uploaded the latest upgrade from iTunes and now I am unable to connect to the Bose system . Can anyone help please? I can connect via my iPad and by using the Bose app so it is not the Bose at fault
@puebloryan, I realize this thread is a bit old, but I have encountered a similr problem and wondered if you had found a solution. I've been using home sharing from itines on my PCs for years, but two days ago, it suddenly stopped. I can share from my Macs, but not from the ONE PC library where I keep all my tunes. I tried all the usual trouble-shooting measures.
After turning home sharing off on the PC's iTunes, turning it back on and turning some other settings off and on, my Macs and Apple TV could briefly "see" the PC library, but as soon as I try to connect -- the wheel spins for a bit and then the connection vanishes. It's as if they try and then give up.
Since this sounds so similar to your problem, I was hoping you finally found a solution. I am also starting a new thread. Thanks! -
Lync Monitoring - Media Quality Diagnostics Reports are empty?
Hi all
We have a working Lync Monitoring solution, which I've used for various troubleshooting. However now for the first time I wanted to view some media quality data and there doesn't seem to be any? I can view the user activity reports and everything just fine,
but any report related to QoE seems to have no data. We have enabled purging and gathering of QoE data and the retention period is 60 days.
I don't know where to go from here. Any ideas? I was thinking about looking in the sql database to see if there is any data, but unfortunately I'm unsure which database to check and what query command i should use on which table.
Thanks for any help you can provide.Hello Casper
my first point of reference would be to take a look into the QOE database to see if there is any information of interest in their.
Also it might be work checking that the backend services are running for the instance to which the QOE database is associated with.
Regards
Iain Smith
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer". Thanks Again!
http://www.northernlync.co.uk or twitter @northernlync
Maybe you are looking for
-
How do I change the default Outlook mailto: account
I just upgraded to a new computer with Windows 7 and Outlook 2010. I'm running Firefox 3.6.9. When I right click on a website and choose "Send link", Firefox correctly uses Outlook as the email client. However, I have several accounts configured in O
-
How do I see what "Other" is in the capacity bar?
Under music in my device, the capacity bar shows that Other has 4GB of space used. What does Other encompass and why is it taking up so much space. This is a 8GB Ipod Nano. Thanks!
-
My iphone could not be activated because the activation server is temporary unvailable
Iphone5 ios7.1.2 my iphone could not be activated because the activation server is temporary unvailable
-
EDI integration w/WHM??
Hello Guys, Anyone plz explain EDI integration w/WHM? appreciate quick reply.?? Thanks. Mohammed.
-
PS CS5 preset sizes, where are they stored?
I recently installed CS5 Extended and I have so many special sizes for images stored for versions in the past and would like to import these so I don't have to start from scratch. Does anyone know where they are stored in the programs? I have 4 for