Mastering templates logic 9 how to use, how to do mastering

I somehow got my Logic Pro 9 in a state where there were inserts in masters channel slider and you could try preset masterings. I cannot find that now. I found templates to start with e.g. stereo mastering but have no idea how i get my arrangement there. Or should I have started with this template and do all the stuff with those two channels "waiting" to be used and if, how?

You don't typically master an arrangement - you master the final stereo mix of your song. Mix your song and then bounce it down to a stereo WAV first, then import that into the stereo mastering template.
(Note that standard practice is to never master a song that you recorded and/or mixed yourself, especially if it is destined for release to the general public).

Similar Messages

  • Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

    Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

    Here's the short-cut solution:
    Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
    HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
    Make sense?

  • Can anyone tell me how to install logic 8 on lion using pacifist step by step in simple terms please

    can anyone tell me how to install logic 8 on lion using pacifist step PLEASE

    Both psd and tiff are the two formats to use for your master file. Saving as a jpg will flatten the layers and remove any trace of transparency. Tiff has an option in the save as dialog box to compress the file.
    If you find it necessary you could zip older files for archiving.
    Once the raw file has been opened in photoshop, it is no longer considered a raw file, as photoshop has no way to save to that file. Which is why you need to save as a psd or tiff.
    That said, camera raw dialog box and Lightroom will save its edits to a sidecar file, which is why they are considered to be non-destructive. Since you can delete the side care file and start again. It is the combination. Of the raw file and the side car file that ends up in photoshop. Which is one reason why it is recommended to do as much as you can in camera raw or Lightroom first. But the latest version of photoshop allows your photoshop filets be loaded into camera raw as a filter. So that recommendation is not as important as it once was.

  • How to install logic 8 on lion using pacifist

    how to install logic 8 on lion using pacifist for dummies Please

    Hi,
    You don't need to uninstall it, but you can drag the old application to the trash when you're sure you're through with it.
    I hope you have the full Logic 8 - if you have bought the upgrade from 7 to 8 you would still need the XS key to install it.
    HTH

  • How to confirm if Web Logic Portal Application is using NETUI PageFlow?

    How to confirm if Web Logic Portal Application is using NETUI PageFlow?

    One easy way is:
    View Page Source via Browser and search for Javascript method getNetuiTagName.

  • If I buy Logic pro, how many computers can I install it on?

    if I buy Logic pro, how many computers can I install it on? will the spp-store let me download again if get new computer?

    The license agreement for the DVD version of Logic is different... and  only allows for you to install it on two computers (Specifically one desktop and one laptop) In additiont you are supposed to only actually run Logic on one of them at a time and not both at the same time...
    So in your instance, you should, according to your license agreement, remove Logic from your older Macbook in order to install it on your new MacBook Pro....
    However, if I were you, I would contact Apple to confirm this as there is some discussion as to if this license agreement is still in force or if Logic, once it is updated via the App Store Update routines in Mountain Lion, then is covered by the App Store agreement which allows unlimited installs of Logic Pro on any computer you own...
    It's a very grey area... and there is nothing stopping you from installing Logic on all three Macs except for that license agreement as the physical check that used to be present in Logic Pro, to prevent you using it on more than one Mac at a time, was removed a while back... so read into that, what you will.
    Again, to be absolutely sure, legally speaking, contact Apple and ask them for guidance... (and if possible get it in writing from them, if they give you the go ahead to install and use Logic Pro on a third computer)

  • Hello i just bought the new 15'' retina macbook pro and i also own logic pro9. how do i transfer logic to my new macbook?

    hello i just bought the new 15'' retina macbook pro and i also own logic pro9. how do i transfer logic to my new macbook?
    do i have to some how ask apple to send me a download link? will apple try to get me to buy another copy?
    thanks for your reply.

    openlampost wrote:
    ...  im thinking that i need to download it from apple ...
    The only way to do that is to Purchase it from the Mac App Store.
    openlampost wrote:
    ... i bought the boxed set logic 9 as an upgrade from logic express9 ... i simply installed logic using dvd drive. ...
    In that case... Install it on your New Mac using the Disc(s) and have all your Serial Numbers handy in case you are asked for them during the Install.
    After the successful install... run Software Update to get any and all Updates... Then Restart your Mac and you should be good to go.
    PS:
    Make sure your MBPr is connected to the Mains for this Long process...

  • I have several custom templates in the my templates/templates chooser. How do I remove and/or delete them.

    I have several custom templates in the my templates/templates chooser. How do I remove and/or delete them?

    Hi Muizen,
    Your remark that Yvan's "remarks are completely useless to (you)" may be correct, but that's hardly his fault.
    Your question was posted in the Numbers community, a place for discussions of issues and techniques specific to the Apple spreadsheet application Numbers, part of the iWork set.
    This community is one of several at the Apple Support Communities site, a place for discussion of technical issues specific to Apple hardware and software.
    Your question regarding removing unwanted templates, posted in the middle of a discussion of Numbers templates (with a side trip to templates made with Pages, the word processing and page layout application that is also part of the iWork set) contained no reference to any application other than Numbers having produced those templates.
    Yvan may have added 'unclearness' to your understanding of the issue, but the origin of that unclearness is your initial post. In case you've forgotten it, here is that post again, quoted in its entirety:
    "Hi Edgar,
    I am struggling to remove custom templates that I don't need.
    The advise is:
    Use the Finder to navigate to the templates and send them to the trash. Look in:
    Username/Library/Application Support/iWork/Numbers/Templates/My Templates.
    However after Application Support iWork does not show up.
    Do you have a solution?"
    Where in that post do you make it clear that the custom templates you are talking about are "MS Word" templates? Where do you even mention that fact?
    In your most recent post you state: "I tried this approach but reported that there is no iWork in my system."
    Actually, you did not report "there is no iWork in (your) system,"t. You did report that "iWork does not show up" when you followed the path given.
    You had made no mention to that time that iWork was not installed on your computer, and the fact that you had posted a question about removing templates in a forum(and in a discussion thread) specifically for one of the iWork applications would lead any reasonably intelligent reader to assume that the application was on your computer, and that, like the other users in this discussion, you were asking about Numbers templates, or at least about templates for one of the iWork applications.
    Given that assumption, and given that the supplied path was the correct path to a user's custom templates for numbers, the most likely explanation of iWork's name missing from the path would be the one Yvan assumed—a misstep by the user at the beginning of the path.
    Regards,
    Barry

  • Logic Pro how to record bass guitar

    Logic Pro how to record bass guitar any tips?

    What's up with this is you don't know what you're doing. Obvuoisly if it was the program's fault a few major motion pictures would have never been scored. Garageband was free with the system, it's made for beginners.
    You've purchased a professional program, now you're going to have to educate yourself, enjoy!
    Oh, you might start with the manual.
    http://documentation.apple.com/en/logicpro/
    Choose the document  "Exploring Logic Pro"  Read through it.
    And from the main manual-
    http://documentation.apple.com/en/logicpro/usermanual/#chapter=10%26section=0
    Don't worry, it won't hurt too much.

  • I have a usb to 14" cable and want to record my guitar through in on logic. How do I do so?!?

    I have a usb to 1/4" cable and want to record my guitar through it on logic. How do I do so?!?

    Hi,
    Interesting cable you have there but, unless it's also and analog to digital converter, it may not work. 

  • The logic of how sap identifies the hardaware key?

    hi,
    When we run 'slicense' transaction code, we can then get the hardware
    key.
    does anybody know the logic of how sap-ag identifies the hardware key?
    is that from motherboard? or harddisk? or OS?
    If we later change something on hardware like memory, harrdisk , will the key then change?
    any comments is appreciated

    Hi Shishir,
    Look at note 174911. It explains where Sap finds the HK, depending your OS.
    Best Regards,
    JC Llanes.

  • I Logic 9 I bought at appel store installed and want to install the new Logic X, how do I uninstall Logic 9 and have the whole program?

    I Logic 9 I bought at appel store installed and want to install the new Logic X, how do I uninstall Logic 9 and have the whole program?
    Message was edited by: davidjsousa

    Of course

  • Is there some logic to how iTunes app rearrangement works with iPhone?

    In iTunes I rearrange apps and delete apps and then apply and a bunch of apps which are unselected and deleted from various home screens re-appear on my iPhone 5 anyway.
    Is there any logic to how it works?
    Thanks,
    doug

    Siri will do that. All you have to do is hold the home button down to activate it, then say 'read me my new text messages'.
    Keep in mind that in some jurisdictions, this is illegal as they don't distinguish between hands free texting and regular texting. If you're pulled over and they determine text messages were sent from your phone while you were driving, you're guilty.

  • I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twa

    I'm new using Logic, i've been using garageband for quite awhile now though but my question is just basic. When i want to record electric guitar while clicking the software option it brings me to alot of guitar sounds that i want to chose. I chose the twangy electric or the distorted strat but i only hear clean sounds. No matter what kind of guitar sound i chose in the library it only produces clean guitar. How can i make it sound like it supposed to? Did i miss something i should do?

    This definitely has me stumped as I'm unsure as to why your guitar can be heard, but with none of the channel strips plugins applied to the sound.
    On the record enabled channel strip that contains your guitar input, is the "I" button located near the "R" active? Also, if you record your guitar, can you hear the FX applied to it when you play back the recorded track?

  • Syncing Logic and multitrack tape using smpte/mtc

    Hi,
    Has anyone managed to sync Logic to multitrack tape using smpte/mtc without major drift ? If you've tried this, let me know your experience.
    Many thanks.

    Never had a problem with wow and flutter - but I guess it depends on how good the tape machine is. I use a Studer A827, so it's not been an issue for me. I just use striped tape, usually at 15 ips, to record the basic tracks, and transfer a reference mix to PT and/or Logic, and transfer those files to Logic and carry on with overdubs, and only use the 24 track tapes again when it's time to mix. I'm not doing anything complex like sound to picture, or chasing the tape in the rest of the recording, so there may be issues lurking which I don't encounter.

Maybe you are looking for