Mat Mast Consumption Data Upload

Hi,
Can you suggest how do I use Program# RMDATIND to upload Consumption data?
On my another thread I got answer to check SAP Note# 200547 and the reference details in it. However, on surfing more I got to know that i can still use above mentioned program to upload consumption data Ref. SAP Note# 555197.
Please let me know if I need to provide more details to get above query answered.
Rgds
KK

Hi,
Y'day I did lot of work on fil format and data upload via program MVER_DI. I am actually not getting correct file format. What I did is i created a file considering below format and wherever i had these fields with no data i left those many spaces. I am also surprised to see that there is no separator allowed between data.
mandt
LIKE
mveg_ueb-mandt,
3
matnr
LIKE
mveg_ueb-matnr,
18
werks
LIKE
mveg_ueb-werks,
4
ertag
LIKE
mveg_ueb-ertag,
8
gvbwrt
LIKE
mveg_ueb-vbwrt,
13
gkovbw
LIKE
mveg_ueb-kovbw,
13
gantei
LIKE
mveg_ueb-antei,
5
uvbwrt
LIKE
mveu_ueb-vbwrt,
13
ukovbw
LIKE
mveu_ueb-kovbw,
13
uantei
LIKE
mveu_ueb-antei.
5
I am uploading data for only one particular period in total consumption. However, when i checked internal table:  MVER_INS_TAB I found that all fields of total consumption: GSV05 and MGV05 are getting updated. Whereas. latter is blank in my file. Also system populates some random value for unplanned consumption: UNV05 and MUV05. I again mention that in the file i have data only in GSV05.
Please let me know what further checks are required for this from my side. Or please let me know if I need to provide any further details on the same from my end.
Rgds,
KK

Similar Messages

  • Vendor Master - Purchasing Data Uploading...very...very urgent.

    Dear sapians,
    Is there any tcode for uploading the vendor master purchasing data (only)? like FK15 and FK16 for uploading company code data and general data in Vendor master.
    Please it is very urgent.....
    Thanks to advance
    Senthil

    hi
    go for LSMW , there is no TCODE for uploading data .
    regards
    ravikant dewangan

  • Mat master -excise data

    HI,
    in material master -foreign trade/exports tab control code is coming
    BUt at bottom
    Excise data section is not coming
    Chapter ID
    No. GRs per EI
    Valid from
    Currency Key
    Net dealer price
    PL suggest

    hi
    1.     Go to IMG  Logistics General  Material Master  Configuring the Material master  Define Structure of Data Screen for each  Screen Sequence.
    2.     Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3.     Once the data screens are exhibited, select data screen no. 12, ie. SSq. 21and Scrn 12, which is  u201CForeign Trade: EXport Datau201D. Select the same and click on Subcreens in the left frame.
    4.     Go to the last  sub screen i.e. 21-12-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
    5.     Now in the last sub screen i.e. no.6 you delete SAPLMGD1 u2013 0001 and instead add SAPLJ1I_MATERIAL_MASTER  and in the screen no. 2205.
    6.     Save the setting.
    7.     Create a Material Master and check whether in Screen  Foreign Trade u2013 Export, Excise related subscreen appears

  • Upload historical material consumption data

    I have my material master up and running.
    Now I need to update the material master with the historical material consumption data.
    Can someone help me out as to how to carry out this exercise.
    I need to upload monthly consumption data of past 5 years for around 40,000 material.
    Regards
    Sridhar

    You can use report MVER_DI
    Please read the documentation of this program, and SAP note 200547.

  • Consumption data material master

    hi can any one tell how to upload consumption data in material master  using BAPI or any other method..
    regards,
    deepthi

    Hi Deepthi,
    Please check this FM <b>MB_UPDATE_MATERIAL_CONSUMPTION</b> perhaps it may help.
    Regards,
    Ferry Lianto

  • Master data upload into SAP system

    Hello,
    I want to know if there is any standard method to upload material master, customer master, vendor master and finance master data into SAP system.
    I am not referring to LSMW's, BDC's and using BAPI's. I am aware of standard programs like RMDATIND for material master upload, RFBIDE00 for customer master upload and RFBIKR00 for vendor master upload. But these are using direct input method and SAP recommends this only for testing purpose. I am not sure if this could be really used in actual live scenarios.
    From some other posts in the forum, I came to know about some transactions like BDLR, SXDB and BMVO. Can some one tell me how to use these T.Codes?
    If some one has any detailed documentation on these T.codes or in general standard master data upload techniques please send it to [email protected]
    Thanks in advance,
    CMV

    Hi,
    Define the following attributes, using the F4 input help and F1 field help:
    Report
    Name of a registered program for this program type
    Variant
    You can only specify a variant with programs that are started directly.
    With direct input, data from the data transfer file undergoes the same checks as with the online transaction and is then transferred directly into the SAP System. The database is updated directly with the transferred data.
    For the documentation of other transactions please refer the correponding program documentation..which is more helpful,
    <b>Reward points if helpful,</b>
    Regards,
    jinesh

  • Consumption data in the material master

    Dear All,
    Can anyone explain me about consumption data in the material master?
    1.     How the consumption datau2019s are automatically updated in the material master?
    2.     List of movement types, that creates consumption data in the material master
    Thanks in advance
    Regards,
    Krishna samy

    Krishna Samy wrote:
    Dear All,
    >
    >
    > Can anyone explain me about consumption data in the material master?
    >
    >
    > 1.     How the consumption datau2019s are automatically updated in the material master?
    >
    > 2.     List of movement types, that creates consumption data in the material master
    >
    >
    > Thanks in advance
    >
    >
    > Regards,
    >
    > Krishna samy
    Hi,
    When a PO is created (say for Cost Center(s)), and if the material has a Material Master record, after the goods are received the same goes directly into Consumption account and not in stock account since it is meant for direct consumption by Cost Center(s). (Ex`s. of consumables are Office supplies).
    Please go thru this document to understand how automatic postings works: [CLICK HERE|http://help.sap.com/saphelp_46c/helpdata/en/12/1a39516e36d1118b3f0060b03ca329/content.htm]
    Reetesh
    Edited by: Reetesh on Nov 27, 2011 7:47 PM

  • FI Master data upload sequence

    Experts,
    Please excuse me if my post sounds vague. I am a Technical Consultant working off-site independently. I couldn't think of a better forum to get functional advice.
    Please look at the below list of FI Master data upload objects, and suggest:
    a. the recommended sequence in which the objects are to be uploaded
    b. points to consider/tips for uploading/recommendations (LSMW/BUS*/BAPIs, etc)
    FI Objects:
    1. Cost Centers
    2. Profit Centers
    3. GL Accounts- COA,CC
    4. Fixed Assets
    5. Bank Data
    6. Cost Elements
    7. Activity Groups
    8. Activity Types
    9. Activity Prices
    Thanks in advance.
    NW

    Hi,
    we have to upload first the Master such as G/l Accounts , Primary Cost Elements & Secondary cost elements.then upload the open items , then p/l balances, then B/S balances , finally asset master with balances
    Pre-Check LSMW: To-Do-List Before Using the Tool
    The LSM Workbench is a tool that supports the transfer of data from non-SAP systems to R/3. Basic functionality of the LSM Workbench:
    1. Import old data from spreadsheet tables or sequential files.
    2. Convert the data from source format into target format.
    3. Import the data into R/3.
    Before using the LSM Workbench, you need a concept for data migration. In particular, note the following items:
    · Make sure that R/3 customizing is complete.
    · Analyze the data existing in the legacy system to determine which data will be needed in the future (also from a business-operational point of view).
    · Consider whether usage of the tool makes sense with regard to the data volumes to be transferred. In case of very small data quantities, it may be easier to carry out the transfer manually. With very large data volumes, however, batch input technology may lead to excessively long runtimes. Rough estimate for the required time: 10000 records per hour; this value, however, may vary strongly depending on the hardware.
    · Identify the transaction(s) in R/3 you want to use for bringing the data into the SAP System. Here, it may also be relevant whether the data is required for statistical (evaluation) purposes or for further processing in the system.
    · Test the relevant transaction in R/3 manually with test data from the old system and make sure that all required fields are filled. There may be required fields that do not correspond to any data window in the legacy system. In such a case, assigning a fixed value or defining the field as optional for data transfer may be appropriate.
    · Check the interfaces provided by the application. Is there a batch input program and an IDoc (for example)? Which method should be used in your project?
    · Develop a mapping plan in written form: Assign the legacy system fields to the R/3 fields.
    · Determine the form (e.g. via u201EMOVEu201C or assigned according to a rule) in which the legacy system data shall be transferred to the SAP System.
    · If applicable, define the allocation rules (LSM-internal name: u201Etranslation rulesu201C).
    · Define the way for extracting the data from the legacy system. (Note: LSMW does not extract data.)
    · Describe the form in which the old data are available: Will the host or the spreadsheet interface of the LSMW have to be used?
    · If only a part of your legacy system will be replaced by R/3, define the functionalities to be provided by the SAP System and those to be provided by the legacy system. If required, create a concept of the data flows and interface architecture.
    These questions can only be answered individually for every customer; as a matter of course, this should be done before the tool is used!
    SKS

  • HR Master  Data Upload

    Hi All,
    I am doing the HR master data upload, I found one idoc HRMD_A but i am unable to find the infotypes  PA2001,PA2002,PA2010,PA2012 in this idoc type.
    Could you please let me know in which type i can get all inoftypes including these .
    Thanks,
    Satheesh

    Check these threads.
    Need ur helps on - HR master data upload Thru LSMW
    about HR data upload

  • Tables used in MM Master Data Upload using LSMW or BDC?

    Hi,
    Can anyone provide me with the following information about uploading MM Master Data using LSMW or BDC :-
    1. What and all tables are used for uploading Material Master, Vendor Master, Info Record, Open PO, Open PR, RFQ, Open Contracts/Agreements ?
    2. What problems are faced during Data Upload ?
    3. What error appears/encouontered during upload ?
    4. What is the diffrence b/w LSMW and BDC ? Both can be used for Data upload so, what differences are b/w them ?
    5. Any other thing to remember/know during Data Upload ?
    Thanks,
    Lucky

    Hi Lucky,
    Dont get angry by seeing my response.
    See each and every question posted by u is available , in this forum,
    u need to do just a search on individual post.
    see what ever ur posted, u r definetly got the solutions through others,
    remember most of these answers are fetching by this threads itself (60-70%)
    a few solutions are there that are given by own,
    so better to search first, in the forum , if not satisfied with the solutions then .........
    Just its an friendly talk
    and Reward points for helpful answers
    Thanks
    Naveen khan

  • Can any one tell me what is the master data upload sequence in sap pm...? i am new to sap pm module..

    Hi experts,
    Please help me to get the sequence for master data upload in sap pm ......

    Probably yet another Blog/Document for someone to create..
    Here's my offerings:
    Finance data: chart of accounts, g/l accounts cost centres, profit centres, activity types, etc
    Configuration data
    Classes/characteristics
    Inspection characteristics
    Master Warranties/Permits/Partners/Documents
    HR masters
    Work centres
    Materials
    Functional locations
    Equipment (serial numbers)
    Measurement points/documents
    BOMs
    Task Lists
    Maintenance items/plans
    Maintenance plan schedule
    Historical orders (if required)
    Historical notifications (if required)
    Historical Measurement documents (if required)
    PeteA

  • Problems in master data upload

    Hi all,
    What r the problem we will face in master data upload?
    Plz  explain this as very urgent.
    Thanks in advance
    Venkat

    Hi Venkat,
    My suugestion is Before Posting a new Post Please close u r previous threads if u r satisfied...
    Then everone will be interested to answer to u r queries..
    Regards,
    Sridhar

  • New SAP Tools for faster Master Data Upload?

    Hi All!
    I am interested in getting some detailed information on different tools that are used for faster master data upload. Please let me know about the tools apart from LSMW, BAPI, eCATT and BDC.
    We basically want to know the following things:
    1.Which are the tools available for this master data upload?
    for eg. SAP MDM, Info Shuttle, other available new age tools etc........
    2. Their performance / feature comparions?
    Please provide performance / feature comparison for different new age tools in detail.
    Thanking you in advance.
    Regards,

    Hi Amar,
    regarding SAP MDM you can read advantages and characteristics here: http://www.sap.com/platform/netweaver/components/mdm/index.epx
    Hope this help you,
    Vito

  • Uploadind consumption data to material master

    Hi Gurus,
    Is there a program to load previous consumption data for a material into the material master as part of data migration, so that it could be used later for forecasting etc.
    Thanks,
    M2202

    Hello,
    Refer the OSS Note: 200547.
    Clear instructions on how to use the OSS Note and the report MVER_DI is given in this..
    Regards,
    Siva

  • Master data Uploading using QTP

    Can any one explain detail about QTP master data uploading.If possible send me the materials abt QTP uploding.

    Hi
    You won't get ready made template.
    You have to prepare the layout according to your requirements.
    First check it with the business requirements, and make note of the details and find the relevant fields in the relevant tables of the master data.
    Prepare the layout as below:
    Say your doing for the Chart of accounts load - Table is SKA1 - take the important fields technical name, character type and length of the field. Enter the data and save it in the desired format.
    VVR

Maybe you are looking for