Mat4Shift - ConvertTo-NcVhdx failing with Object reference not set to an instance of an object
Hi, We're just trying to use Mat4Shift 1.7 to convert some VMware VMs into Hyper-V format and it's randomly failing at the conversion stage when running the ConvertTo-NcVhdx command. It seems to be hit and miss with VMDK files of around 40GB - it usually fails the first time around with the error above, so you clean the environment up and rerun and it will work. However, we've got a few VMs with large VMDK files - one in particular was originally a 1.2TB RDM which we connected to the VM in virtual mode and cloned. This one seems to fail pretty regularly and we cannot get it to convert. The progress bar for ConvertTo-NcVhdx (just checking but is that exactly the same command as ConvertTo-NaVhdx) somtimes doesn't get past 0%, othertimes it bombs out at 3% and the furthest it got was 20% after which it bombed out after ten minutes with the same error as above. Any ideas please or is there a limit of what the maximum size VMDK this can handle is? I've stripped off the Out-Null statement at the end but there's no other output - I've also tried manually adding the -SkipUnmap command in case it wasn't being handled properly via the Splat variable but no difference there. I've attached a redacted screenshot which also shows that the first disk (41GB) converts without issue but then the next throws a SIS clone error - is there any way to get more verbose output from this at all please? Thanks in advance!
Have you tried converting the RDM LUN directly into a VHDX without the middle step? See example 4. PS C:\Users\administrator.SMIS-RTP1> get-help -examples ConvertTo-NcVhdxNAME
ConvertTo-NaVhdxSYNOPSIS
Convert a VMDK file, a fixed VHD file, or a Data ONTAP LUN into a VHDX file.-------------- Example 1 --------------C:\PS>ConvertTo-NaVhdx -SourceVhd F:\VHD\win2k8r2.vhd -DestinationVhdx F:\VHDX\win2k8r2.vhdx
Convert a VHD file to a VHDX file. Mode LastWriteTime Length Name
-a--- 8/16/2012 3:05 PM 26847739904 win2k8r2.vhdx
-------------- Example 2 --------------C:\PS>ConvertTo-NaVhdx -SourceVMDK X:\VMDK\Monolithic\win2k8r2.vmdk -DestinationVhdx X:\VHDX\win2k8r2.vhdx
Convert a VMDK file in a CIFS share into a VHDX file. Mode LastWriteTime Length Name
-a--- 8/16/2012 3:00 PM 26847739904 win2k8r2.vhdx
-------------- Example 3 --------------C:\PS>ConvertTo-NaVhdx -SourceVMDK /vol/vol2/cifs/VMDK/Monolithic/win2k8r2.vmdk -DestinationVhdx
/vol/vol2/cifs/VHDX/win2k8r2.vhdx
Performs the same operation as Example 2, except it uses the direct path on the controller to the file. This is
useful if there is no CIFS share providing access to the VMDK file. Name Type Size Created Modified Owner Group Perm Empty
/vol/vol2/cifs/VHDX/win2k8r2.vhdx file 25 GB 8/16/2012 8/16/2012 0 0 1077
-------------- Example 4 --------------C:\PS>ConvertTo-NaVhdx -SourceLun /vol/vol2/luns/lun0 -DestinationVhdx F:\VHDX\fromLUN.vhdx
Convert the Data ONTAP LUN into a VHDX. Mode LastWriteTime Length Name
-a--- 8/16/2012 3:38 PM 10775166976 fromLUN.vhdx
Similar Messages
-
Hi All,
Could you please help me here? On my Laptop which is running on windows 8.1 Operation system, I enabled the Hyper-V client feature and setup the Windows Fail-over Clustering using Windows 2012 Standard Edition. So, there are three machines which are running
on the Hyper-V. Below are the machine details;
1st machine - Working as Domain controller and its name is "ACONDomainGroup" and allocated to
1GB RAM to use.
2nd machine - Working as Node1 and its name is "AconNODE1W2K12STD"
and allocated to 2.5GB RAM to use.
3rd machine - Working as Node1 and its name is "AconNODE1W2K12STD"
and allocated to 1.5GB RAM to use.
and the windows virtual cluster name is "AconWinCLTR". While I am doing the SQL Cluster Installation, I am getting below mentioned error. all systems have 4.5 .net installed. May you please guide me where and what i am missing to complete sql clustering.....
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL
Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft
SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network
Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule
rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule
rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String
ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1
ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()Dharmendra, the log details are incomplete are not sufficient enough for I guess anyone to help. Besides, from the details above, I can see that the Failover Cluster Disks are not selected:-
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana -
SQL 2012 install fails with 'Object reference not set to an instance of an object.'
Hi, I'm trying to install SQL 2012 RTM Enterprise on a Windows 2008 R2 single node cluster.
The installer starts goes through some checks and then fails with the message 'Object reference not set to an instance of an object.' It happens while the small 'wait while...' dialog box is
showing, another window pops up briefly (I think the feature selection window - can't really tell as it doesn't draw before disappearing). Then the ‘Object reference not set’ message comes up.
From the summary log file..
Overall summary:
Final result:
Failed: see details below
Exit code (Decimal):
-2147467261
Exit facility code:
0
Exit error code:
16387
Exit message:
Object reference not set to an instance of an object.
Start time:
2012-09-26 08:52:53
End time:
2012-09-26 08:54:08
Requested action:
InstallFailoverCluster
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x9AF1AE5E%400x44A889F9&EvtType=0x9AF1AE5E%400x44A889F9
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()
I have rebooted, tried different media, tried uninstalling the setup files and rerunning but always get the same result.
Any help would be gratefully accepted.
Thanks,
Bruce.Hi Alberto,
Whenever I am trying to install SQL 2012 with SP1 clustering, I am getting below error. Can you please advise on this.
Additional information are
Windows Servers Version and Edition - Windows 2012 Strandedition
SQL Server Version and Edition - SQL 2012 with SP1
All the machines are running on Hyper-V and Passed the cluster validation test successfully. there is no issue. The servers' (Nodes) names are;
DomainServerName - ACONDomainGroup (1gb ram allocated)
Node1 - AconNODE1W2K12STD (2.5gb ram allocated )
Node2 - AconNODE2W2K12STD (1.5 ram allocated allocated)
WindowsClusterName - AconWinCLTR
Below is Summary.txt Error
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize() -
I have installed Project Server 2013 on SharePoint 2013, and installed the first PWA which worked. But I needed to change some configurations and so I deleted the PWA instances, but now I cannot delete the Project Server Service Application. Every attempt
to delete the Service Application it gives the error above, namely:
Sorry, something went wrong
Object reference not set to an instance of an object.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: ecaeaf9c-9fec-3049-ba23-d9a18337b9e2
Date and Time: 8/18/2014 12:55:31 PM
I'd urgently appreciate help.Thanks Paul for the reply. Here's the error, and the logs below covering the time the error occurred.
I've tried to extract a section of the log file below:
==========================================================
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm.
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
08/18/2014 19:20:19.07* w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
08/18/2014 19:20:19.07 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
af4yd High [Forced due to logging gap, cached @ 08/18/2014 19:20:18.99, Original Level: Verbose] TenantAppEtag
record requested but there is no sitesubscription or tenantId for site {0} so we will use the WebApp Id for the cache. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.07 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Asp Runtime
aj1kp High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PreSendRequestHeaders f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.10 w3wp.exe (0x7240)
0x7370 Project Server Unified Logging Service
b8fx High ULS Init Completed (w3wp.exe, Microsoft.Office.Project.Server.Native.dll) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.15 w3wp.exe (0x7240)
0x7370 0x6FB7007
6t8h High [Forced due to logging gap, cached @ 08/18/2014 19:20:19.07, Original
Level: Verbose] {0} f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.15 w3wp.exe (0x7240)
0x7370 Project Server Provisioning
9or8 High [Forced due to logging gap, Original Level: Verbose] Unprovisioning service app {0}
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.16 w3wp.exe (0x7240)
0x7370 Project Server Provisioning
8ig5 High Unregistering project psi shared application timer job. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.21 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
8nca Medium Application error when access /_admin/ServiceApplicationDelete.aspx,
Error=Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob() at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication
psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData) at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender,
EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyn... f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.21* w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
8nca Medium ...cPoint, Boolean includeStagesAfterAsyncPoint)
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.23 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Runtime
tkau Unexpected System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob()
at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData)
at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoin... f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.23* w3wp.exe (0x7240)
0x7370 SharePoint Foundation Runtime
tkau Unexpected ...t) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.24 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception
of type 'System.Web.HttpUnhandledException' was thrown. ---> System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob()
at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData)
at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.Rais...
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.24* w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajlz0 High ...ePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm. 67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32* w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.38 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Upgrade
aiaih High [Forced due to logging gap, Original Level: Verbose] desiredVersion: {0}
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.41 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
aat87 Monitorable f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://sharepoint:48488/_admin/ServiceApplicationDelete.aspx?id=24024e6bfd8f486ea7ab0b68658ce165&IsDlg=1
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.46 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Monitoring
b4ly Medium Leaving Monitored Scope (Request (POST:http://sharepoint:48488/_admin/ServiceApplicationDelete.aspx?id=24024e6bfd8f486ea7ab0b68658ce165&IsDlg=1)).
Execution Time=550.415729455012 f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm.
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
08/18/2014 19:20:20.08* w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
08/18/2014 19:20:20.30 OWSTIMER.EXE (0x09C4)
0x09F8 SharePoint Foundation Monitoring
nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish). Parent No acba9844-723f-4477-901c-adfdcae98e4e
08/18/2014 19:20:20.30 OWSTIMER.EXE (0x09C4)
0x09F8 SharePoint Foundation Logging Correlation Data xmnv
Medium Name=Timer Job SchedulingUnpublish f1c4af9c-ffd4-3049-ba23-d4fe1cc1d1d7
08/18/2014 19:20:20.31 OWSTIMER.EXE (0x09C4)
0x0A10 SharePoint Foundation Monitoring
nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish). Parent No 5dbf5387-ba14-4980-bc61-5ba5490870fa
==============================================
Thanks for the attention. -
Object reference not set to an instance of an object error with Import data
Hi Experts,
We are using BPC 7.5M with SQL Server 2008 in Multiserver environment, I am getting an error "Object reference not set to an instance of an object." while running Import data package, earlier we use to get this error sometime(once in a month) but it goes away if we reboot the application server but this time I have rebotted the Application server multiple times but still getting the same error.
Please Advice.
Thanks & Regards,
RohitHi Rohit,
please see the sap note 1615837, maybe this help you.
Best regards
Roberto Vidotti -
hi,
We have deployed Sharepoint 2013 in hosting mode. And i followed this
guide. And i have 1 web server, 1 app server and 1 DB server. My Application server is logging 2 critical event after every 15 min.
Event ID: 1502, Task Category: Timer Job, Source: SharePoint Translation Services
"Timer job '735da5fd-a74a-46b8-9a75-70e85d125eb2' for service application 'Translation Service Application' is failing to execute. More information is included below.
Object reference not set to an instance of an object. "
Followed by this one one more critical event,
Event ID: 6398, Task Category: Timer , Source: SharePoint Foundation
"The Execute method of job definition Microsoft.Office.TranslationServices.QueueJob (ID 735da5fd-a74a-46b8-9a75-70e85d125eb2) threw an exception. More information is included below.
Object reference not set to an instance of an object."
I tried to search everywhere, but no solution. Because of this two critical events AppFabricCaching service is also crashing.
Any suggestion how i can fix this?
SaMHi SaM,
According to your error message, it says that the Timer job '735da5fd-a74a-46b8-9a75-70e85d125eb2' for service application 'Translation Service Application' fail to create due to some referred object cannot
be found. For this issue, it can be caused by missing assembly .
Could you please provide detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Here is a blog you can have a look:
http://powerpivotgeek.com/2010/10/04/bug-cannot-install-powerpivot-if-a-sql-server-shared-folder-has-been-specified-in-a-previous-installation-to-other-than-the-default-folder/
Best Regards,
Eric
Eric Tao
TechNet Community Support -
I am running a custom workflow to create volumes that has worked since WFA 2.x, and which works well in 3.0P1. With WFA 3.1RC1 it throws this error when attempting to apply a quota to the volume: INFO [Apply Quota Policy to Volume or Qtree] Started Quota resize on volume post_wfa31rc1_test2_w_mirror on vserver MySVM ERROR [Apply Quota Policy to Volume or Qtree] Command failed for Workflow 'Create Volume (Schwab)' with error : Object reference not set to an instance of an object. INFO [Apply Quota Policy to Volume or Qtree] ***** Workflow Execution Failed ***** I have executed the PS commands from this code block in a PS shell with no errors. Has anyone else seen a similar issue with 3.1RC1? Scott Lindley
I have narrowed the problem down to a single command and can reproduce the problem very easily. However, I can't seem to fix it. But I believe importing this single custom command into both a WFA 3.0P1 and WFA 3.1RC1 system will easily show that it works in 3.0P1 and throws the odd 'Object reference not set to an insance of an object' error. I say that is an odd error because I'm only used to seeing that error at Preview time referring to an object reference in a Command Parameter field of a workflow. I know how to deal with that issue. However here, the error appears at the end a PowerShell command. Actually, the PowerShell command appears to me to execute entirely and correctly. It is just that at the end of running this exception error is thrown and that causes the command (and workflow if running within a workflow) to fail. But the comamnd correctly adds the 'default' quota policy to the volume and even enables quota resize as it should. So it works, but still blows up the workflow it is within. I'm going to attempt to attach these three things here: 1) screenshot showing the command running (with Command Test Button) fine under WFA-3.0P1, 2) a screenshot showing the command running but throwing the error on a WFA-3.1RC1 system 3) the ,dar file holding just the command: "Apply Quota Policy to Volume or Qtree" (I added .txt to the end of .dar file name) ------1) running OKay on 3.0P1 -------------------------- 2) running with the ERROR on WFA 3.1RC1 SOME NOTES: My lab environment where I re-created the problem: The WFA 3.0P1 system is a Windows 2008R2 server that happens to have the original PowerShell 2.0 on it The WFA 3.1RC1 system is a Windows 7 system that I have updated PowerShell to 4.0. The customer environment: I'm less certain of details (maybe Scott can fill in) The version of PowerShell is TBD (guessing 2.0) , but they are running the same PS version for both 3.0P1 and 3.1RC1 because they are upgrading/downgrading WFA on the same system
-
Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx Autodiscover: Web service request. Success 46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint : autodiscover.domain.com
Id : Autodiscover
ClientAccessServer : CAS01.domain.com
Scenario : Autodiscover: Web service request.
ScenarioDescription :
PerformanceCounterName :
Result : Success
Error :
UserName : Gazpromuk.intra\extest_645e41faa55f4
StartTime : 8/21/2013 4:08:50 PM
Latency : 00:00:00.1250048
EventType : Success
LatencyInMillisecondsString : 125.00
Identity :
IsValid : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867 -
"An error has occurred:Object reference not set to an instance of an object."
This error message comes up with a user in InfoView. The user schedules a report, updates parameters, and the report kicks off successfully. But then a few minutes later, this error is received. This occurs sporadically, regardless of the length of time of report or amount of data being retrieved. Sometimes the report runs to completion. Other times this error message occurs.
Has anyone seen this before and have any thoughts?
Thank you.
“An error has occurred:Object reference not set to an instance of an object.”Are you able to replicate the issue both in Java and .NET InfoView?
For .NET InfoView, sometimes the "An error has occurred: Object reference not set to an instance of an object" error shows up after the .NET Framework is upgraded to 2.0 -
"Object reference not set to an instance of an object" in WAD
10:45:09.659 ########## --> com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable ##########
-EXCEPTION-START- 10:45:09.659: DEBUG ### Browser Init failed. 2nd try will be proceeded. ---
Exception Message: Object reference not set to an instance of an object.
Exception at SAPWADMXHTML.IWADMXBrowser2.AttachAnnotator(Boolean On)
at com.sap.bi.et.wad.AxSAPWADMXHTML.AxCWADMXBrowser2.AttachAnnotator(Boolean on)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable(Boolean iBool)
Full Stack:
at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
at com.sap.bi.et.wad.Debug.Exception(Exception, String)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable(Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.set_BrowserDesignMode(Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.Navigate(String, Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SetHTMLsafe(String, Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SetHTML(String, Boolean)
at com.sap.bi.et.wad.man.WADctlEditViewLayout.SetDocumentHTML(String)
at com.sap.bi.et.wad.man.WADctlEditViewLayout.TemplateXML2HTMLEdit()
at com.sap.bi.et.wad.man.WADfrmTemplateMDIWindow.UpdateView(Int32, Int32, Boolean)
at com.sap.bi.et.wad.man.WADfrmTemplateMDIWindow.tabLayoutTab_Switch(Object, EventArgs)
at System.Windows.Forms.TabControl.OnSelectedIndexChanged(EventArgs)
at System.Windows.Forms.TabControl.WmSelChange(Message&)
at System.Windows.Forms.TabControl.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.SendMessage(HandleRef, Int32, IntPtr, IntPtr)
at System.Windows.Forms.Control.SendMessage(Int32, IntPtr, IntPtr)
at System.Windows.Forms.Control.ReflectMessageInternal(IntPtr, Message&)
at System.Windows.Forms.Control.WmNotify(Message&)
at System.Windows.Forms.Control.WndProc(Message&)
at System.Windows.Forms.ScrollableControl.WndProc(Message&)
at System.Windows.Forms.ContainerControl.WndProc(Message&)
at System.Windows.Forms.Form.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr, IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.NativeWindow.DefWndProc(Message&)
at System.Windows.Forms.Control.DefWndProc(Message&)
at System.Windows.Forms.Control.WmMouseDown(Message&, MouseButtons, Int32)
at System.Windows.Forms.Control.WndProc(Message&)
at System.Windows.Forms.TabControl.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
at System.Windows.Forms.Application.Run(Form)
at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----Hello Dieu,
Have you found a solution of this exception?? i also come across this one.
Kind Regards,
Clark -
I'm running this command in the Azure PowerShell to deploy my node project as a service:
Publish-AzureServiceProject -ServiceName <name> -Location "East US"
Using my service name instead of <name>.
Each time I run this, I get an error:
Publish-AzureServiceProject : Object reference not set to an instance of an
object.
At line:1 char:1
+ Publish-AzureServiceProject -ServiceName <name> -Location "East US"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (:) [Publish-AzureServiceProject], N
ullReferenceException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.CloudService.Pub
lishAzureServiceProjectCommand
I have added my certificate and verified it with Get-AzureSubscription.
Can anyone help?When I run Get-AzureSubscription, the subscription already seems to be set. I assume this happened when I imported my publish settings. I tried your suggestion to do it manually, but this didn't fix my problem.
I've started implementing the deployment script linked in the blog post, but I'm running into all sorts of problems as I try to do so. First, this seems to assume I have a service package and publish settings. I'm guessing the package is going to need to
be generated for each deployment, but the script doesn't handle this. How can I also have the script generate the new package so that the service can be deployed? I've currently hard-coded the path of cspack into the script, but this seems like a bad way to
do it.
Since the publish settings have the certificate, I imagine I don't want to commit those to version control. Can I also generate this as part of the script? I want the script to be as hands-off as possible.
Thank you for your help! -
Hi, My name is Leonard and I am studying SQL. I have downloaded the newest MS SQL 2012 and also MS 2012 Hyper-V. I have set a MS 2012 Hyper-V on a laptop with AMD Turion 64 X2 and 3G of RAM (Planing
to add more to max at 8G).
Following the instructions in the free online
Administering Microsoft SQL Server 2012 Databases” Training Kit, I have set 6 virtual machines as instructed in the Training Kit. While the installation of the MS Server Core 2008 R2 SP1 completed with no
problem, the same cannot be said for the SQL Server 2012 installation. I have encountered an error that I have not seen anyone address in any of the SQL web forums.
After running the unattended setup instruction (Setup.exe /qs /ACTION=Install /FEATURES=SQLEngine /INSTANCENAME=MSSQLSERVER
/SQLSVCACCOUNT="Njowa\Pa$$worD>" /SQLSVCPASSWORD=" Pa$$worD” /SQLSYSADMINACCOUNTS="Njowa\lenny#4!@" /AGTSVCACCOUNT="NT AUTHORITY\Network Service"
/IACCEPTSQLSERVERLICENSETERMS) this is what I get after a series SQL setup
initiation windows popups then disappears.
The following error occurred:
Object reference not set to an instance of an object.
Error result: -2147467261
Result facility Code: 0
Result error Code: 16387
Please review the summary.txt log for further details
My question is: What instance of an object is not properly initialize in the Setup instructionsHello,
Please note that SQL Server requires at least 1 GB of RAM. The operating system (Windows Server) requires 2 GB of RAM (recommended) or 512 MB (minimum). This means any virtual machine that will receive the installation of a SQL Server instance requires 1.5
or 2 GB at least.
The behavior of SQL Server setup tells me that the virtual machine does not have enough memory assigned or .NET Framework 3.5 was not enable on Control Panel->Program
and Features before trying to install SQL Server.
The following thread is about another possible cause of this error:
http://social.msdn.microsoft.com/Forums/mr-IN/sqlsetupandupgrade/thread/575d3025-69f5-4152-a473-44496b008811
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Object Reference Not Set To An Instance Of An Object - Outlook Add-In - Add-In Express
Hi,
My Add-In has been developed in VS2010 using the Add-In Express pack.
Its a very simple add-in that shows an IT support ticket email detailing PC information. To use it, following installing the add-in, the user must select the tab in outlook and click on the Send IT Support Email button which will generate an Outlook Email
Template with specific information about the PC that I pull using VB.
It works fine in Windows 7 & 8, but throws an 'Object Reference Not Set To An Instance Of An Object' exception in Windows XP. Screenshot is shown below:
The code is below
Imports System.Runtime.InteropServices
Imports System.ComponentModel
Imports System.Drawing
Imports System.Windows.Forms
Imports AddinExpress.MSO
Imports System.Object
Imports System.Net
Imports System.Environment
Imports System.Net.NetworkInformation
Imports System.Windows.Forms.Application
Imports Microsoft.Office.Interop.Outlook
Imports outlook = Microsoft.Office.Interop.Outlook
'Add-in Express Add-in Module
<GuidAttribute("735B7BC8-DD2F-44D8-BC37-30D86769C065"), ProgIdAttribute("$safeprojectname$.AddinModule")> _
Public Class AddinModule
Inherits AddinExpress.MSO.ADXAddinModule
#Region " Add-in Express automatic code "
'Required by Add-in Express - do not modify
'the methods within this region
Public Overrides Function GetContainer() As System.ComponentModel.IContainer
If components Is Nothing Then
components = New System.ComponentModel.Container
End If
GetContainer = components
End Function
<ComRegisterFunctionAttribute()> _
Public Shared Sub AddinRegister(ByVal t As Type)
AddinExpress.MSO.ADXAddinModule.ADXRegister(t)
End Sub
<ComUnregisterFunctionAttribute()> _
Public Shared Sub AddinUnregister(ByVal t As Type)
AddinExpress.MSO.ADXAddinModule.ADXUnregister(t)
End Sub
Public Overrides Sub UninstallControls()
MyBase.UninstallControls()
End Sub
#End Region
Public Shared Shadows ReadOnly Property CurrentInstance() As AddinModule
Get
Return CType(AddinExpress.MSO.ADXAddinModule.CurrentInstance, AddinModule)
End Get
End Property
Private Sub AddInModule_AddInInitiatize(ByVal sender As Object, ByVal e As EventArgs) _
Handles MyBase.AddinInitialize
'Outlook 2010 = 14
If Me.HostMajorVersion >= 14 Then
AdxOlExplorerCommandBar1.UseForRibbon = False
End If
End Sub
Public ReadOnly Property OutlookApp() As Outlook._Application
Get
Return CType(HostApplication, Outlook._Application)
End Get
End Property
'Gets the MAC Address from the NIC Information
Function getMacAddress()
Dim nics() As NetworkInterface = _
NetworkInterface.GetAllNetworkInterfaces
Return nics(0).GetPhysicalAddress.ToString
End Function
Sub CreateTemplate()
Dim sHostName As String
Dim sDomain As String
Dim sUserName As String
Dim sOS As String
Dim s64 As String
Dim sMAC As String
Dim host As String = System.Net.Dns.GetHostName()
Dim LocalHostaddress As String = System.Net.Dns.GetHostEntry(host).AddressList(1).ToString()
Dim MyItem As Outlook.MailItem
'Finds the PC Number
sHostName = Environ$("computername")
'Finds the Domain
sDomain = Environ$("userdomain")
'Finds the Username logged into the PC
sUserName = (Environment.UserDomainName & "\" & Environment.UserName)
'Finds the Operating System
sOS = (My.Computer.Info.OSFullName)
'Shows the results collected from the getMacAddress Function in the sMac variable
sMAC = getMacAddress()
'Finds the Architecture of the Operating System - x86 or x64
If (Environment.Is64BitOperatingSystem) Then
s64 = ("64bit")
Else
s64 = ("32bit")
End If
'Creates a Template Email
MyItem = OutlookApp.CreateItem(Outlook.OlItemType.olMailItem)
'Configures the Sender as [email protected]
MyItem.To = "[email protected]"
'Shows the template
MyItem.Display()
'Shows all of the string in the Email Body
MyItem.HTMLBody = String.Concat("<b><u>IT SUPPORT TICKET</u></b>", "<br/><br/>", "<tr><b>PC Number: </b></tr>", sDomain, "\", sHostName, "<b></b>", "<br/><br/>", "<b>Username: </b>", sUserName, "<b></b>", "<br/><br/>", "<b>OS Version: </b>", sOS, s64, "<b></b>", "<br/><br/>", "<b>IP Address: </b>", LocalHostaddress, "<b></b>", "<br/><br/>", "<b>MAC Address: </b>", sMAC, "<b></b>", "<br/><br/>", "<b>Comment:</b>", "<br/>", "<i>Please give a brief description of your problem attaching a screen shot if possible</i>", "<br/><br/>") & MyItem.HTMLBody
End Sub
Private Sub AdxRibbonButton1_OnClick(ByVal sender As Object, ByVal control As IRibbonControl, ByVal pressed As Boolean) Handles AdxRibbonButton1.OnClick
'Runs CreateTemplate
CreateTemplate()
End Sub
Private Sub AdxCommandBarButton1_Click(ByVal sender As Object) Handles AdxCommandBarButton1.Click
'Runs CreateTemplate
CreateTemplate()
End Sub
End Class
I would appreciate any help with this whatsoever as I am pulling my hair out!!
Many Thanks!!
ChrisHi,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your Add-in is developed using Add-in Express which is third-party, I suggest consulting Add-in Express forum:
http://www.add-in-express.com/forum/index.php for better support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"Object reference not set to an instance of an object" when using Sheel Shah's example
I am attempting to use a custom add dialog as in http://blogs.msdn.com/b/lightswitch/archive/2011/07/07/creating-a-custom-add-or-edit-dialog.aspx and
I get the error "Object reference not set to an instance of an object." when clicking my button to AddEntity(). My code to call the control is:
User u = new User();
userdialoghelper.AddEntity(u);
Any ideas as to why I'm getting this error? I "think" that I've set up the class properly?
ScottI may be a couple of years late to the party here (using VS2013) but I also had some issues adapting to Yann's improvements over Sheel's code.
Sheel's screen code as provided has the word "Old in the InitializeDataWorkspace and the created methods. this does not work when copy/pasted. ALso removed the "UI" from "InitialiseUI()"
Following code can be used with Yann's Helper Class.
Namespace LightSwitchApplication
Public Class EditableCustomersGrid
Private customersDialogHelper As ModalWindow
Private Sub EditableCustomersGrid_InitializeDataWorkspace(saveChangesTo As System.Collections.Generic.List(Of Microsoft.LightSwitch.IDataService))
customersDialogHelper = New ModalWindow(Me.Customers, "CustomerViewDialog")
End Sub
Private Sub EditableCustomersGrid_Created()
customersDialogHelper.Initialise()
End Sub
Private Sub gridAddAndEditNew_CanExecute(ByRef result As Boolean)
customersDialogHelper.CanAdd()
End Sub
Private Sub gridAddAndEditNew_Execute()
customersDialogHelper.AddEntity()
End Sub
Private Sub gridEditSelected_CanExecute(ByRef result As Boolean)
customersDialogHelper.CanView()
End Sub
Private Sub gridEditSelected_Execute()
customersDialogHelper.ViewEntity()
End Sub
Private Sub EditDialogOk_Execute()
customersDialogHelper.DialogOk()
End Sub
Private Sub EditDialogCancel_Execute()
customersDialogHelper.DialogCancel()
End Sub
End Class
End Namespace -
"Object reference not set to an instance of an object" on loading reports
Hi,
I get "object reference not set to an instance of an object" for some charts in a report.
Software: SQL Server 2008 R2 SP2 & SharePoint 2010
I have 2 reports each with multiple graphs & tables. The reports are used in SharePoint integrated mode.
3 months back Report1 gave the error for 4 specific charts. After a few days, the error vanished magically & all charts displayed correctly.
I recently deployed Report2 which also contains charts & tables. After a few days, the 1st chart itself would not display throwing this error. I deleted the Report2 from SharePoint and redeployed it. Now the error is shown for 2 charts in between &
I again see the error for the same 4 charts of Report1.
Since deleting and redeploying the Report2, moved the error to a different chart, it does not look like a problem with the chart itself. Please suggest on what I can do further.Hi,
This is a general error message. I would ask the following questions to verify the issue:
1. Are these charts inside the table?
2. Does the table display fine? What’s the size of the report and charts?
Please try download the latest cumulative update package for SQL Server 2008 R2 Service Pack 2 from the following link and see if it address the issue:
http://support.microsoft.com/kb/2730301/en-us
You can also capture the screenshots regarding the issue so that I can understand
problem in more details.
Thanks.
Tracy Cai
TechNet Community Support -
Hi,
(1) I am trying to get the data from a database table and import into a text file.
(2) If the record set have the data then it runs ok
(3) when the record set not having any data it is giving the below error
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object
Could you please let me know why this is happening?
Any help would be appriciated
Thanks,
SIVYou might ask them over here.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral%2Ccsharpgeneral%2Cvcgeneral&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Maybe you are looking for
-
Hi, I've searched for threads on this, but nothing came up with my particular situation. First, I'll state my specs iMac 24" (aluminum) 3.06GHz Core2 Duo 4GB RAM 500GB HDD So, after much procrastinating, I decided this weekend that I would organize m
-
S400 unable to turn off wireless
Hi , I am unable to turn off or on wifi/bluetooth with the f7 key(alternatiely the wireless key). wifi and bluetooth are enabled always whch i feel is power consuming when not required. the key seems to be unusable. netbook config is : i3, 2gb ram, a
-
PVDM2-12DM compatibility with HWIC-1CE1T1-PRI
Hi there, I'm hoping someone can assist. The setup i am trying to get working is the following User dials in over POTS to an ISDN30 Line. The ISDN30 line (3rd Party Supplier) is connected to our 2911 via a HWIC-1CE1T1-PRI module.
-
EPM Architect not showing in Shared Services Application list
I have installed and configured system 11.1.1.3 and created and deploy applications in Workspace using EPMA. However when I open the Foundation list, I do not see EPM Architect in the list. Is there something I need to do to create EPM in shared serv
-
XY Graph with No Lines, Just Points?
Hi All, I want to build a Pressure vs. Temperature graph. This should be a standard XY graph, but I just want to see the point scatter with no lines connecting the points. Is there a way to eliminate the lines between the points (or make them invis