Match/copy option while installing BC
Hi All,
I would like to know the exact functionality of Match/copy option while installing Business content.
Thanks in advance
regards,
Ali
hi Ali,
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡ the match indicator is not set and
¡ the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
a. Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
b. Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
hope this helps.
Asign points if helpfull
regards
KP
Similar Messages
-
How to provide terms & conditions option while installing an AIR application
Hi
I have an AIR application which is developed using flex SDK. I have got an requirement that when the user tries to install the AIR application, I need to display the terms & conditions details. If the user accepts the terms & conditions, it need to be install the application. Is it possible to do?
And also i need to set the expiration date (i.e. trial period) so the application gets expired on the specified date in the user's machine. I am not sure whether these two things are possible? Please advice.
ThanksHi Douglas,
Thanks very much (and to Chris) for getting back to me.
I attached a zip file that is a small 'hello world' AIR application that I
compiled using FlashBuilder 4, configured to use the 4.1 sdk. I also
attached the self-signed certificate I used when exporting the release
build. The password for this is dogdish. This application gives the error
messages I indicated in my post when attempting to install on the Mac where
the AIR runtime is not yet installed.
We recently upgraded from FlexBuilder 3 to FlashBuilder 4, which I believe
is when this issue started. I followed the instructions for doing a side-car
installation and had no problems with either Mac or Windows when using
FlexBuilder 3.
Thanks for any help you can provide! -
Errors encountered while installing EBS 11.5.10.35 on Windows XP Pro
I have been trying to install 11i on my desktop running Windows XP Pro SP2 follwoing another thread by naveed27c. I can pass all the pre-installation check but the same error messages always come up when I reach step 2 of 5. The short version of the error message is like this:
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
There are more in the log but it is too long and I hate to copy all of them here.
I don't know what causes the problem. Within the preparation process there are a few steps where I am not sure that I have done correctly. I guess one or all of them could cause troubles.
1. In his thread, naveed27c mentioned the need to "opt for Register Environment Variables while installing VC++", but I don't see such an option while installing the package.
2. When setting path to include c:\cygwin\bin, I can add it and see it using echo %path%. But once I close the command window and reopen it, echo %path% does not return c:\cygwin\bin anymore. Also, I can't find c:\v98\bin, but c:\v98\vc\bin. Shall I add c:\v98\vc\bin to be included in PATH?
3. My hosts file is like this:
127.0.0.1 localhost ben.oraclef.com
192.168.1.11 ben.oraclef.com
I added "oraclef.com" as the Primary DNS Suffix at both places (Computer Name and Network Connections. I can ping both "ben.oracle.com" and "ben".
Are the above settings correct?
4. When installing 11i, I entered the following in Express Configuration Information screen:
MKS directory=c:\cygwin\bin
MSDEV directory="c:\v98" (Here, shall I put "c:\v98\vc\bin"?)
Domain=oraclef.com
I am the only user and administrator. Do I need to create extra users?
I do apologize for this lengthy message. But I am so desperate to install this software. I would GREATLY appreciate your help.Hi hsawwan,
I have added c:\cygwin\bin to the path following your instruction and can see it in a command window.
Tried to install 11i again just now but failed again. It is a clean system, I reitaled the OS. Got Microsoft Visual C++ 6 from Microsoft Visual Studio 6.0. While installing I chose to install VC++ only to c:\v98. Also installed Service Pack 6. After that I can see c:\v98\bin in the path.
Downloaded CYGWIN and installed the selected components to c:\cygwin. HOWEVER, I can not find the specified "diffutils".
In the 11i Express Configuration I filled the following:
MKS directory=c:\cygwin\bin
MSDEV directory=c:\v98
Domain=oraclef.com
I added "oraclef.com" as the DNS suffix. My hosts file looks like this:
127.0.0.1 localhost ben.oraclef.com
192.168.1.11 ben.oraclef.com
I can ping both ben and ben.oraclef.com
Here are the error messages I got:
[b]There was an error while running the command - c:\oracle\visdb\9.2.0\temp\VIS_ben\adrun9i.cmd APPS APPS
There is no such global user or group: BEN\XXXX.
There is no such global user or group: XX.
More help is available by typing NET HELPMSG 3783.
c:\oracle\visdb\9.2.0\temp\VIS_ben\adrun9i.cmd APPS APPS has succeeded
Step 1 of 5
Command: c:\oracle\visdb\9.2.0\temp\VIS_ben\adrundb.cmd
Processing Step 2 of 5
Executing: c:\oracle\visdb\9.2.0\temp\VIS_ben\adrundb.cmd APPS APPS
Where XXXX is my first name and XX stands for my last name. I am the only user and also the administrator of my desktop.
In addition, I got the following error:
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
I apologize for bothering you again. Please give me some light on how to resolve these errors. -
I have downloaded Windows 8.1 standalone updates from Microsoft Download Center. I don't want them to be separately installed on Windows 8.1 Copy. I want to keep the updates somewhere in Windows 8.1 setup USB/DVD so that while installing using that USB/DVD,
the updates should be automatically installed.Hi,
Operating system package-servicing commands can be used offline to install, remove, or update Windows® packages provided as cabinet (.cab) or Windows Update Stand-alone Installer (.msu) files.
Dism /Image:C:\test\offline /LogPath:AddPackage.log /Add-Package /PackagePath:C:\packages\package.msu
Details you can refer to:
DISM Operating System Package Servicing Command-Line Options
http://technet.microsoft.com/en-us/library/hh825265.aspx
Kate Li
TechNet Community Support -
Resrtict - copy from option while creating Production order
Dear all,
I want to know how to Block the "copy from" option while creating Production order(CO01).
Regs.
S.RDear Ramesh,
You can do this Via SHD0
Just check the below link
[Regarding Backflushing(MFBF) fields making display;
Regards
kumar -
Which SLD option should be used while Installing BI in SAP
hi all,
I had installed my BI development server with local SLD. now while installing quality server i want to use the same SLD which is there in development.now while installation its ask for the option of choosing SLD.
can i choose use central SLD and give the host name of development SLD.is this the correct procedure or should i install using the option
"Configure a local SLD"
Regards,
PriyaIf you want to use the Development SLD then for QA you need to select the Central SLD option and then provide the host name and the port no of the Development server.
Decision of Local SLD vs. Central SLD totally depends on the system load. For PI systems generally it is recommended to have local SLD for each D, Q and P.
Hope this helps.
Thanks,
Naveed -
Error while installing SAP Enterprise 4.70 for Oracle
Hi all,
While installing R/3 4.7 on Windows 2000 with oracle database ,while installing database instance i encountered the following error message.
CJS - 00084 SQL statement or Script failed
Error Message: Executable D:\oracle\ora92/bin/sqlplus.exe returns 3
FJS - 00012 Error when executing script
I am copying the contents of the sapinst.log and sapinst_dev.log for reference.
sapinst.log:
TRACE
receiving on port 21212
TRACE
sending on port 21213
TRACE
host name is sapsrv
TRACE
effective user corresponds to real user
TRACE
Administrator has SID S-1-5-21-1085031214-413027322-839522115-500
TRACE
account Administrator exists with parameter domain="SAPSRV"
TRACE
existence check for user Administrator returned true.
TRACE
inserted account (Administrator, S-1-5-21-1085031214-413027322-839522115-500, USER) into the accountcache.
TRACE
java has been started with the following command line: "C:\j2sdk1.4.2_15\bin\javaw.exe" -cp jar\instgui.jar;jar\inqmyxml.jar -Dsun.java2d.noddraw=true com.sap.ins.gui.Main -port 21212
TRACE
guiengine: waiting for connect on ports 21212 and 21213
TRACE
got notification...
TRACE<i>
got notification...
TRACE
signaling connect answer...
TRACE
releasing notifyLock
TRACE
trying to aquire notifyLock...
TRACE
running...
TRACE
showing dlg diInit
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
releasing notifyLock
TRACE
Opened iaccdlib.dll
TRACE
Calling m_pGui->showLicenseAgreement()
TRACE
got notification...
TRACE
ACTION_OK received
TRACE
releasing notifyLock
TRACE
Opened iamodwas.dll
TRACE
The controller registered the module CIaWapsSystem
TRACE
The controller registered the module CIaWapsInstance
TRACE
The controller registered the module CIaWapsSystem
TRACE
The controller registered the module CIaWapsInstance
TRACE
The controller registered the module CIaWapsDBName
TRACE
The controller registered the module CIaWapsDBName
TRACE
The controller registered the module CIaWapsDBName
TRACE
Opened iamodora.dll
TRACE
The controller registered the module COraInputChecker
TRACE
Opened iamodos.dll
TRACE
The controller registered the module CIaOsPorts
TRACE
The controller registered the module COraInputChecker
TRACE
The controller registered the module COraInputChecker
TRACE
The controller registered the module CIaOsCheckJava
TRACE
The controller registered the module CIaOsCheckJava
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|dAskWhat
TRACE
showing dlg dORA_R3E_What
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
releasing notifyLock
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : INST
TRACE
The step dAskWhat with key R3E|ind|ind|ora|R3E|47|0|dAskWhat has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|dAskInstanceType
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : INST
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : INST
TRACE
showing dlg d_SAPComponent_InstanceType_ABAP
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
releasing notifyLock
TRACE
The step dAskInstanceType with key R3E|ind|ind|ora|R3E|47|0|dAskInstanceType has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|dAskDbType
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : INST
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : DB
TRACE
showing dlg dORA_R3E_dbType
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
releasing notifyLock
TRACE
The step dAskDbType with key R3E|ind|ind|ora|R3E|47|0|dAskDbType has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|dFillChildContext
TRACE
Opened iamodutl.dll
TRACE
t_SAPComponent_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
The step dFillChildContext with key R3E|ind|ind|ora|R3E|47|0|dFillChildContext has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dSetDbInfoContextParam
TRACE
The step dSetDbInfoContextParam with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dSetDbInfoContextParam has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dGetHostInfo
TRACE
Processing row CONDITION=TRUE HOSTADDRESSES=value(NEEDED) HOSTALIASES=value(NEEDED) HOSTCPUCOUNT=value(NEEDED) HOSTCPUFAMILY=value(NEEDED) HOSTNAME=value(NEEDED) HOSTNAMELENGTH=value(NEEDED) HOSTOSFANAME=value(NEEDED) HOSTOSTYPE=value(NEEDED) HOSTPLATFORM=value(NEEDED) HOSTRAM=value(NEEDED) HOSTSWAP=value(NEEDED) OPMODE=GETINFO
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
INFO 2007-08-14 18:02:32
Processing of host operation t_HostInfo_SHARED succeeded.
TRACE
The step dGetHostInfo with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dGetHostInfo has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dGetCurrentProcessInfo
TRACE
effective user corresponds to real user
TRACE
account Administrator exists with parameter domain="SAPSRV"
TRACE
effective user corresponds to real user
TRACE
account Administrator exists with parameter domain="SAPSRV"
TRACE
account Administrator exists with parameter domain="SAPSRV"
TRACE
t_HostInfo_SHARED.updateRow(, WHERE HostRole='LOCALHOST'), updating
TRACE
The step dGetCurrentProcessInfo with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dGetCurrentProcessInfo has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dCompleteContextWithHostInfo
TRACE
The step dCompleteContextWithHostInfo with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dCompleteContextWithHostInfo has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|makeSystemRowDB
TRACE
t_SAPComponent_Waps_System_SHARED.completeRow(, WHERE WapsSystemName='V11'), inserting
TRACE
t_SAPComponent_Waps_System_SHARED.completeExpression(, WHERE WapsSystemName='V11'), completing
TRACE
The step makeSystemRowDB with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|makeSystemRowDB has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|askForKeyParameters
TRACE
t_SAPComponent_Private.updateRow(, WHERE ROWNUM=0), updating
TRACE
showing dlg d_SAPComponent_DBInstance
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
releasing notifyLock
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
t_HostInfo_SHARED.updateRow(, WHERE HostRole='LOCALHOST'), updating
TRACE
The step askForKeyParameters with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|askForKeyParameters has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|cleanTables
TRACE
The step cleanTables with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|cleanTables has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|makeInstanceRow
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceType='DB' AND WapsInstanceNumber='' AND WapsInstanceHost='sapsrv'), inserting
TRACE
t_SAPComponent_Waps_Instance_SHARED.completeExpression(, WHERE WapsSystemName='V11' AND WapsInstanceType='DB' AND WapsInstanceNumber='' AND WapsInstanceHost='sapsrv'), completing
TRACE
The step makeInstanceRow with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|makeInstanceRow has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dFillContextTablesOfOtherChildren
TRACE
t_SAPComponent_Waps_System_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
t_DatabaseSystem_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
tCheckLibPath_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Accounts_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
t_SAPComponent_Exports_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Stop_Services_CONTEXT
TRACE
t_SAPComponent_Filesystem_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
t_SAPComponent_Ports_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Profiles_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Services_CONTEXT
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_MMC_CONTEXT
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Program_Items_CONTEXT
TRACE
t_SAPComponent_Archives_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Pre_Steps_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Post_Steps_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_General_Environment_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Permissions_CONTEXT
TRACE
t_DatabaseClient_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
found a match, deleting rows
TRACE
disabling branch t_DatabaseClientDB2_CONTEXT
TRACE
t_DatabaseServer_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseLoad_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabasePostLoad_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPInstancePrepare_context.updateRow(, WHERE ROWNUM=0), inserting
TRACE
t_SAPInstanceDbActions_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_DatabaseExport_context
TRACE
t_SAPComponent_Rfc_Jobs_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_InQMy_CONTEXT
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Enable_Java_CONTEXT
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Waps_System_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
The step dFillContextTablesOfOtherChildren with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dFillContextTablesOfOtherChildren has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|AskForAbapOrJava
TRACE
The step AskForAbapOrJava with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|AskForAbapOrJava has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|makeCIRow
TRACE
t_SAPComponent_Waps_Instance_SHARED.completeExpression(, WHERE WapsSystemName='V11' AND WapsInstanceType = 'CI'), inserting
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceType = 'CI'), updating
TRACE
t_SAPComponent_Private.updateRow(, WHERE ROWNUM=0), updating
TRACE
showing dlg d_SAPComponent_CentralInstance
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
releasing notifyLock
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceType = 'CI'), updating
TRACE
The step makeCIRow with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|makeCIRow has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|convertExpressions
TRACE
t_SAPComponent_Waps_System_SHARED.updateRow(, WHERE WapsSystemName='V11'), updating
TRACE
The step convertExpressions with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|convertExpressions has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|propagateContext
TRACE
t_SAPComponent_Waps_Instance_Dirs_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
The step propagateContext with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|propagateContext has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|calculateRamDistribution
TRACE
found row
TRACE
found row
TRACE
myPart: 2, allParts: 5
TRACE
t_SAPComponent_Waps_Instance_SHARED.completeRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv'), completing
TRACE
The step calculateRamDistribution with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|calculateRamDistribution has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|invokeHostDialog
TRACE
showing dlg dNT_SAPComponent_Waps_Instance_Hostinfo
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
releasing notifyLock
TRACE
The step invokeHostDialog with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|invokeHostDialog has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|tweakWindowsDomain
TRACE
t_SAPComponent_Waps_System_SHARED.updateRow(, WHERE WapsSystemName='V11'), updating
TRACE
The step tweakWindowsDomain with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|tweakWindowsDomain has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|completeContexttableHack
TRACE
t_SAPComponent_Waps_System_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseSystem_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
tCheckLibPath_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Accounts_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Exports_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Filesystem_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Ports_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Profiles_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Archives_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Pre_Steps_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Post_Steps_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_General_Environment_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseClient_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseServer_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseLoad_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabasePostLoad_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPInstancePrepare_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPInstanceDbActions_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Rfc_Jobs_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
The step completeContexttableHack with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|completeContexttableHack has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE[E]
Node F:\ does not exist.
TRACE[E]
Unable to determine used space on drive F:/: The device is not ready.
TRACE[E]
Unable to determine free space on drive F:/: The device is not ready.
TRACE[E]
Unable to get user quota on drive F:/: The device is not ready.
TRACE
t_DriveMapping_SHARED.completeRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv' AND Key='WAPS_SapDir'), inserting
TRACE
t_DriveMapping_SHARED.completeRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv' AND Key='WAPS_SapTransHost'), inserting
TRACE
The step GetMountInfo with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|InvokeDialog
TRACE
t_DriveMapping_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv' AND Key='WAPS_SapDir'), updating
TRACE
Opened iajsmod.dll
INFO 2007-08-14 18:02:38
The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
TRACE
t_SAPComponent_Private.updateRow(, WHERE ROWNUM=0), updating
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
showing dlg dNT_SAPComponent_Waps_Instance_Dirinfo
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
releasing notifyLock
TRACE
t_DriveMapping_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv' AND Key='WAPS_SapTransHost'), updating
TRACE
The step InvokeDialog with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|InvokeDialog has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|writeTable
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateExpression(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv'), updating
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv'), updating
TRACE
The step writeTable with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|writeTable has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|fillContextOfSubcomponents
TRACE
The step fillContextOfSubcomponents with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|fillContextOfSubcomponents has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|DatabaseCommonParameters|ind|ind|ora|ind|ind|0|dialogGetCommonParams
INFO 2007-08-14 18:02:40
Copying file D:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2007-08-14 18:02:40
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
TRACE
Getting OraVolatileDatabaseParameters.xml from CD: D:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml
TRACE
Reading volatile database parameters from 'OraVolatileDatabaseParameters.xml'.
TRACE
tGlobalDbParameters.completeRow(, WHERE dbSid = getContextParameter('dbSid')), completing
TRACE
CDomainObjectCache::readFromKeyDb: Reading from tGlobalDbParameters WHERE dbSid = 'V11'
TRACE
tGlobalDbParameters.updateRow(, WHERE dbSid = getContextParameter('dbSid')), updating
TRACE
tGlobalDbParameters.updateRow(, WHERE dbSid = getContextParameter('dbSid')), updating
TRACE
tORA_DriveSelect.completeRow(, WHERE key = 'sapdataHome'), inserting
TRACE
tORA_DriveSelect.completeRow(, WHERE key = 'oraArch'), inserting
TRACE
<table name="tGlobalDbParameters">
<!--
points to base table :tGlobalDbParameters
belongs to client :R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|DatabaseCommonParameters|ind|ind|ora|ind|ind|0
Row count of client table :1
Row count of base table :1
-->
<columns>
<column name="dbSid"><!-- points to base table attribute :dbSid-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="DbHostname"><!-- points to base table attribute :DbHostname-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbServerVersion"><!-- points to base table attribute :dbServerVersion-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbServerBit"><!-- points to base table attribute :dbServerBit-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbClientVersion"><!-- points to base table attribute :dbClientVersion-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbClientBit"><!-- points to base table attribute :dbClientBit-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbHome"><!-- points to base table attribute :dbHome-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbHomeName"><!-- points to base table attribute :dbHomeName-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbSchema"><!-- points to base table attribute :dbSchema-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="OraStageDir"><!-- points to base table attribute :OraStageDir-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column&gand look for
sqlplus.exe returns 3
this should help - issue was posted multiple times -
Error 1305 while installing Crystal Reports 2008, JavaSDK
While installing Crystal Reports from the original media on a new Lenovo Thinkpad running Windows XP Pro SP3 I get the following error while installing:
Error 1305: Error reading from File: c:\program files\Business Objects\javasdk\jre\audio\soundbank.gm. Verify that the file exists and that you can access it.
I have the option to retry or cancel, obviously cancel exits the installer. Retry just fails again. I have tried to access the file (which does exist) and I cannot because it is in use. I used Sysinternals process explorer to find out what has the file in use and it is msiexec.exe which is the Microsoft Installer service which is running in order to install CR2008.
I have tried restarting, setting permissions on the file and folder, uninstalling and reinstalling Java VM from Sun. I even tried killing msiexec (which killed the install). I even tried taking out all reference to java in a custom install.
I am at a loss on what to do next. Any help would be appreciated.
-MichaelI found that if I installed it from a copied local directory instead of the CD Rom that it worked
-
Error while installing service registry
Hi,
Don't know if this is the right part of forum to ask this query, sorry for that
I have SOA 10.1.3.3 installed on my XP machine
I am tring to install Service Registry 10.1.3.1 ( this is the latest verison available from oracle site).I am choosing standalone registry install and after that
I am choosing option of creating new database and selecting olite 10g db
( other db available are XE and oracle 10g)
Authentication account info as database.
While installing , system installer gives error at 62% saying build failed.
the error being cannot delete Windows/polite.ini
When I stop the olite service( The read me file provided says that we need to have appserver and db running) , the installer moves 1 mm ahead.It starts writing polite.ini file , but immediately gives error as
java.lang.UnsatisfiedLinkError
The log file content related to this error is as follows:
[java] database:
[java] database.createComplete:
[java] database.create:
[java] account_core:
[java] account_core.database:
[java] [echo] Preparing database account backend ...
[java] [style] Processing C:\WINDOWS\OracleServiceRegistry10131\app\uddi\conf\account_core.xml to C:\WINDOWS\OracleServiceRegistry10131\app\uddi\conf\account_core.xml.new
[java] [style] Loading stylesheet C:\WINDOWS\OracleServiceRegistry10131\etc\bin\account_core_backend.xsl
[java] [style] Processing C:\WINDOWS\OracleServiceRegistry10131\app\uddi\conf\group_core.xml to C:\WINDOWS\OracleServiceRegistry10131\app\uddi\conf\group_core.xml.new
[java] [style] Loading stylesheet C:\WINDOWS\OracleServiceRegistry10131\etc\bin\group_core_backend.xsl
[java] [move] Moving 1 files to C:\WINDOWS\OracleServiceRegistry10131\app\uddi\conf
[java] [move] Moving 1 files to C:\WINDOWS\OracleServiceRegistry10131\app\uddi\conf
[java] server.database:
[java] [echo] Copying JDBC drivers ...
[java] db.create.complete:
[java] uddi.class.path.jars_zips:
[java] olite.database:
[java] polite_ini:
[java] [echo] Installing polite.ini into Windows directory ...
[java] [move] Warning: Could not find file C:\WINDOWS\polite.ini to copy.
[java] [copy] Copying 1 file to C:\WINDOWS
[java] create_db:
[java] debug_print:
[java] [echo]
[java] [echo] UDDI_DB : ;DataDirectory=C:\WINDOWS\OracleServiceRegistry10131\olite;Database=uddinode
[java] [echo] UDDI_USER : uddiuser
[java] [echo] java.library.path : C:\Program Files\Java\jdk1.5.0_10\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Oracle9iclient\bin;C:\Program Files\Java\jdk1.5.0_10\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\oraclexe\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\Oracle\jdk\bin;C:\WINDOWS\Oracle\ant\bin;C:\product\10.1.3.1\OracleAS_1\jdk\bin;C:\product\10.1.3.1\OracleAS_1\ant\bin;C:\Program Files\Java\jdk1.5.0_10\bin;C:\apache-ant-1.6.5\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\;C:\WINDOWS\system32\Wbem;C:\Program Files\WinZip;C:\Program Files\Visual Networks\Dial Analysis\;c:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\product\10.1.3.1\OracleAS_1\MOBILE\sdk\bin;C:\WINDOWS\Oracle\MOBILE\sdk\bin;C:\xmlbeans-2.3.0\bin;C:\WINDOWS\Oracle\OPatch;;C:\WINDOWS\OracleServiceRegistry10131/etc/olite
[java] [echo]
[java] [echo] Creating new database ...
[java] [copy] Copying 1 file to C:\WINDOWS\OracleServiceRegistry10131\olite
[java] create_input_quiet:
[java] [java] Exception in thread "main" java.lang.UnsatisfiedLinkError: jniGetDbCharEncoding
[java] [java] at oracle.lite.poljdbc.LiteEmbJDBCConnection.jniGetDbCharEncoding(Native Method)
[java] [java] at oracle.lite.poljdbc.LiteEmbJDBCConnection.connect(Unknown Source)
[java] [java] at oracle.lite.poljdbc.LiteEmbJDBCFactory.createConnection(Unknown Source)
[java] [java] at oracle.lite.poljdbc.POLJDBCConnection.<init>(Unknown Source)
[java] [java] at oracle.lite.poljdbc.OracleConnection.<init>(Unknown Source)
[java] [java] at oracle.lite.poljdbc.POLJDBCDriver.connect(Unknown Source)
[java] [java] at java.sql.DriverManager.getConnection(DriverManager.java:525)
[java] [java] at java.sql.DriverManager.getConnection(DriverManager.java:140)
[java] [java] at com.systinet.uddi.database.util.CreateSchema.setUpConnection(CreateSchema.java:266)
[java] [java] at com.systinet.uddi.database.util.Connector.init(Connector.java:133)
[java] [java] at com.systinet.uddi.database.util.CreateSchema.main(CreateSchema.java:349)
[java] BUILD FAILED
[java] file:C:/WINDOWS/OracleServiceRegistry10131/etc/db/olite/installOliteDB.xml:173: Java returned: 1
COuld anybody help me out?You could try the Database Lite forum.
-
Hi all,
OS: OEL 6.3 64 bits
DB: 11.2.0.3
Grid: 12.1
While installing Grid Control 12c, the following error appears to me:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: no env vars set, no envVars.properties file is generated
INFO: none of the components are configurable
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /gridControl/WLS/jdk16/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Install Finished at: 2013-07-04_11-12-49-PM
INFO: The ARU ID found in shiphomeproperties.xml file is 226
INFO: ARUId present in shiphomeproperties.xml matches with the 64 bit OMS Platforms ARU ID 226, so -d64 is passed for wls install.
INFO: Executing the command /gridControl/WLS/jdk16/jdk/bin/java -d64 -Djava.io.tmpdir=/gridControl/WLS/.wlsinstall_temp -Xms128m -Xmx1024m -jar /u01/binaries//wls/wls1035_generic.jar -mode=silent -silent_xml=/gridControl/WLS/.wlsinstall_temp/wls.xml -log=/u01/oraInventory/logs/installActions2013-07-04_11-07-45PM.log.wls -log_priority=debug
INFO: Extracting 0%....................................................................................................100%
INFO: ERROR STREAM: *sys-package-mgr*: skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'
INFO: #
INFO: # A fatal error has been detected by the Java Runtime Environment:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0x0000003a23689cdc, pid=24834, tid=139710737405696
INFO: #
INFO: # JRE version: 6.0_24-b50
INFO: # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
INFO: # Problematic frame:
INFO: # C [libc.so.6+0x89cdc]
INFO: #
INFO: # An error report file with more information is saved as:
INFO: # /tmp/hs_err_pid24834.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
INFO: Return value is 134
INFO: POPUP ERROR:Installation of Oracle WebLogic Server has failed, check log files for more details.
The line "skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'" is the one that's worring me. Can it be corrupt? Or it is something else?
Thanks in advance.Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause. If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.
-
Error while installing SAP 4.7 using Oracle on windows 2000 Server
Hi friends,
I am installing 4.7 SAP R/3 SR1 Server on Windows 2000 SP4. The installation of Oracle DB, Patch for Oracle 9.2.0.2.1, and Central instance were successful.
The Database instance fails at phase 16 of 34 (DB creation) with the following error message
WARNING 2007-01-11 11:10:49
Execution of the command "C:\oracle\RQ8\920/bin/oradim -NEW -SID RQ8 -STARTMODE manual -SRVCSTART system" finished with return code 35. Output: DIM-00035: You have entered and invalid option for the -EDIT command
ERROR 2007-01-11 11:10:49
CJS-00095 Error return code.<br>DIAGNOSIS: Return code 35 of executable C:\oracle\RQ8\920/bin/oradim indicates an error.<br>SOLUTION: See log file oradim.log for details.
The content of oradim.log is:
DIM-00035: You have entered and invalid option for the -EDIT command
I have reviewed all the install notes, tried to upgrade to 9.2.0.4.1, and repeated the install several times but nothing works.
Regards,
Praveenhi geeks..
i am having some Data in SAP 4.6 C and here Oracle 8i is the database instance .
Now i am installing 4.7 E in another system and i want to use the same database (4.6 C)where all of my data is there and i hv to use the Oracle 9i this time.
Can i directly copy the database directly from 4.6 C and give the path while installing 4.7 E
Whether this will work here ???
Pls let me know the solution for this.......
Solution will be rewarded..
Thanks in Advance,
Srini. -
Error while installing APEX3.2
Hi,
FYI, I do not know about database and APEX.
But I have to install APEX3.2 on my team linux server.
I got an error while installing APEX3.2.
The installation guide says as below.
Run apex_epg_config.sql passing the file system path to the base directory where the Oracle Application Express software was unzipped as shown in the following example:
On UNIX and Linux:
@apex_epg_config /tmpUsing Putty, I moved to the folder where APEX3.2 is unzipped on the server and connected it sysdba.
From there I ran apex_epg_config.sql as below and got an error.
I'm confused with /tmp.
If I am already in the current folder, should I again define the path? If yes, how it should be?
FYI, APEX3.2 is unzipped in "/home/oracle/apex" of the Linux box.
Would appreciate your help.
SQL> @apex_epg_config
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as '/tmp/apex/images'
Directory created.
old 47: if '&IMGUPG' != '' then
new 47: if '' != '' then
old 48: l_mv_folder := '&IMGUPG';
new 48: l_mv_folder := '';
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 18
Commit complete.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
timing for: Load Images
Elapsed: 00:00:00.07
Session altered.
PL/SQL procedure successfully completed.
Commit complete.
Session altered.
Directory dropped.
SQL>Thanks,
Guy
Edited by: GUY3 on Jun 24, 2009 12:25 PMHi,
APEX team successfully installed APEX3.2 on the linux box with the following steps.
1. Dropped user APEX_030200 and flowxxxx user with cascade option
2. ran the apex installation SQL
3. ran the following post installation process from sql prompt to copy the images
@apxldimg.sql /home/oracle
4. ran the apxchpwd.sql to change the password of 'Admin' user.
It seems I skipped dropping flowxxxx user option.
Thanks,
Guy -
Problem while installing ECC6.0 IDES with EP
Hi,
I have successfully installed ECC6.0 IDES with ABAP+JAVA.
Now while installing the same with ABAP+JAVA and with EP &EPC , I am getting the following error while installing.can any one tell me how the problem can be resolved?
Jan 6, 2009 9:54:45 AM Info: End of log messages of the target system.
Jan 6, 2009 9:54:45 AM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jan 6, 2009 9:54:45 AM ***Error: Aborted: development component 'irj'/'sap.com'/'SAP AG'/'7.0014.20071112134549.0000'/'1', grouped by software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.14.0.20071210152326''/'1':***
***Caught exception during application deployment from SAP J2EE Engine's deploy API:***
***com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: java.lang.NullPointerException***
***Exception is:***
***java.lang.NullPointerException*** at com.sap.engine.deploy.manager.DeployManagerImpl.deployUpdateAction(DeployManagerImpl.java:666)
at com.sap.engine.deploy.manager.DeployManagerImpl.deploy(DeployManagerImpl.java:513)
at com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performDeployment(EngineJ2EE620OnlineDeployerImpl.java:332)
at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:128)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:97)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:68)
at com.sap.sdm.control.command.cmds.Deploy.execute(Deploy.java:179)
at com.sap.sdm.control.command.decorator.AssureStandaloneMode.execute(AssureStandaloneMode.java:53)
at com.sap.sdm.control.command.decorator.AssureOneRunningSDMOnly.execute(AssureOneRunningSDMOnly.java:61)
at com.sap.sdm.control.command.decorator.SDMInitializer.execute(SDMInitializer.java:52)
at com.sap.sdm.control.command.decorator.GlobalParamEvaluator.execute(GlobalParamEvaluator.java:60)
at com.sap.sdm.control.command.decorator.AbstractLibDirSetter.execute(AbstractLibDirSetter.java:46)
at com.sap.sdm.control.command.decorator.ExitPostProcessor.execute(ExitPostProcessor.java:48)
at com.sap.sdm.control.command.decorator.CommandNameLogger.execute(CommandNameLogger.java:49)
at com.sap.sdm.control.command.decorator.AdditionalLogFileSetter.execute(AdditionalLogFileSetter.java:65)
at com.sap.sdm.control.command.decorator.AbstractLogDirSetter.execute(AbstractLogDirSetter.java:54)
at com.sap.sdm.control.command.decorator.SyntaxChecker.execute(SyntaxChecker.java:37)
at com.sap.sdm.control.command.Command.exec(Command.java:42)
at SDM.main(SDM.java:21)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jan 6, 2009 9:54:45 AM Info: Starting to save the repository
Jan 6, 2009 9:54:46 AM Info: Finished saving the repository
Jan 6, 2009 9:54:46 AM Info: Starting: Initial deployment: Selected software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.14.0.20071210152326''/'1' will be deployed.
Jan 6, 2009 9:54:46 AM Error: Aborted: software component 'EPBC'/'sap.com'/'SAP AG'/'1000.7.00.14.0.20071210152326''/'1':
Failed deployment of SDAs:
development component 'irj'/'sap.com'/'SAP AG'/'7.0014.20071112134549.0000'/'1' : aborted
Please, look at error logs above for more information!
Jan 6, 2009 9:54:46 AM Info: Starting to save the repository
Jan 6, 2009 9:54:47 AM Info: Finished saving the repository
Jan 6, 2009 9:54:47 AM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Jan 6, 2009 9:54:47 AM Error: -
At least one of the Deployments failed -
Jan 6, 2009 9:54:48 AM Info: Summarizing the deployment results:
Jan 6, 2009 9:54:48 AM Error: Aborted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/EPBC14_0.SCA
Jan 6, 2009 9:54:48 AM Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/EPBC214_0.SCA
Jan 6, 2009 9:54:48 AM Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/EPPSERV14_0.SCA
Jan 6, 2009 9:54:48 AM Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/EPWDC14_0.SCA
Jan 6, 2009 9:54:48 AM Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/UWLJWF14_0.SCA
Jan 6, 2009 9:54:48 AM Error: Admitted: /stage/stageecc1/AS_JAVA_DVD/51033513/DATA_UNITS/JAVA_J2EE_OSINDEP_UT/SAPEU14_0.SCA
Jan 6, 2009 9:54:48 AM Error: Processing error. Return code: 4
Awaiting for early reply,
Hi ,
I would like to add some of my observations
1. I checked in jcmon that SDM status is showing stopped.
2.I tried to start the SDM by executing the command StartServer.sh and got message that it was started successfully but in jcmon it is still showing as "stopped".
I am not sure whether the above problem is due to this.
Additionally, I would like to mention that my JDK version is 1.4.2_17 and platform is HP-UX11.31
Regards,
Moulinath
Edited by: Moulinath Ray on Jan 6, 2009 8:07 AM
Edited by: Moulinath Ray on Jan 6, 2009 8:08 AMHi,
Thank you very much for your reply.
1. I checked the file system.One file system is showing full.
DevFS 11 11 0 100% /dev/deviceFileSystem
Please let me know how can I reduce it / deletion of which files will not cause any harm?
2. There is space remaining in Database.So, no problem with it.
3. I found the following message from sdm_log
$ tail dev_sdm
[Thr 2] Mon Jan 5 20:47:02 2009
[Thr 2] JLaunchRequestFunc: receive command:17, argument:0 from pid:14451
[Thr 2] JLaunchIShutdownInvoke: set shutdown interval (stop:1231168622/end:1231168742/TO:120)
[Thr 2] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 2] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 2] JLaunchISetState: change state from [Running (3)] to [Stopping (5)]
[Thr 6] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 6] SigISetIgnoreAction : SIG_IGN for signal 18
[Thr 6] JLaunchCloseProgram: good bye (exitcode = 0)
4. In jcmon also, the status is showing as stopped.
5. I tried to start the SDM by executing command Startserver.sh fron /usr/sap/<SID>/DVEBMGS00/SDM/program
But it is not starting.The process is getting hanged.
$ ./StartServer.sh
running on HP-UX better use the '-XdoCloseWithReadPending' option
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/7.0014.20071029094708.0000
JStartupFramework is active
Operation mode of SDM in JStartupFramework is "Standalone". Simply start the server.
Initializing Network Manager (50017)
Starting SDM Server listening on port 50018
SDM started successfully.
Redirecting output to the two files "/usr/sap/IN1/DVEBMGS00/SDM/program/log/sdm_server.out" and "/usr/sap/IN1/DVEBMGS00/SDM/program/log/sdm_server.err" respectively.
6. One more point to mention is that the value of one kernel parameter "nkthread" is not matching with prescribed value>=10000. But I could not change the value and so proceeded with the installation.Can this be a root cause? While installing ECC only with ABAP+JAVA , I did not find any problem but this time I am facing the problem.
Please let me know your valueable inputs.
Thanks and Regards,
Moulianth
N.B. I just now checked the file system size of my ECC6.0 installation with ABAP+JAVA which finished successfully.There also the device file system was full.So, it seems that this is not the problem.
Edited by: Moulinath Ray on Jan 7, 2009 5:21 AM -
Insufficient memory error while installing JRE 1.2.2
At the moment I am having some problems installing JRE 1.2.2 on a HP proliant DL380 G3 machine (with two XEON 2.8Gb processors) with windows 2000 SP 3 installed. The error is �Insufficient memory available to run setup. Close any programs�.. bla bla. Error 111�. While the machine has 4Gb of memory installed and only 200mb is in use.
I have tried 1.2.2.011 (Pentium 4 bug solved) and 1.2.2.014, both with the same result. Unfortunaly I need the 1.2.2 and can�t �switch� to version 1.3 or 1.4.
PS I also experienced almost the same problem while installing Oracle 8.1.7 on the same machine. And solved this by renaming symcjit.dll to symcjit.old and use the next installation options : JRE_MEMORY_OPTIONS=-nojit -ms64m -mx128m
Has anyone seen this problem and solved it or is there any way to give some additional options to the JRE installer?
Thanks in advance,
Frank ZomerdijkI found a bug report at: http://developer.java.sun.com/developer/bugParade/bugs/4643265.html
And there by the "work a round";
In order to install j2ee onto your server (with 4Gb or more) you might use one of those:
1) Pull some DIMMs out of your server till the memory is less
than 4g. Install j2ee and than put the DIMMs back.
2) Install j2ee on the other machine and than just copy
installed directories over to your server.
I will test the second option tomorrow.
Frank -
Segmentation fault while install Grid 11.2.0.3
Hi guys.
I try to install a stand alone oracle Database 11.2.0.3 with ASM over a RedHat 6.4 x86_64 Vmware server.
Hardware
4 cores
32 GB RAM
Vmware server 5.1.0
Operating System
RedHat 6.4 x86_64, 2.6.32-358.6.2.el6.x86_64 (update today with yum update).
All needs packages installeds (i think so).
Vmware tools installed and updated.
Software
p10404530_112030 software packages.
Disk are mapping with udev/multipath, not ASM.
Installing steps.
1.- Execute enviroment shell.
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_SID=+ASM; export ORACLE_SID
ORACLE_HOME=/u01/app/11.2.0.3/grid; export ORACLE_HOME
PATH=$PATH:$ORACLE_HOME/bin:$BASE_PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
2.- Execute Grid runInstall
3.- Chose Configurarion Grid for Standalone server.
4.- ASM disk are founded, listed and selected.
5.- Requirement validator only warning pdksh package, but Redhat 6 has ksh package (and it's installed). So, i ignored that warning and continue.
6.- Install process start fine.
7.- Install process want executed root scripts
[root@oraclepruebas ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@oraclepruebas ~]# /u01/app/11.2.0.3/grid/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0.3/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0.3/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'oracle', privgrp 'oinstall'..
Operation successful.
LOCAL ONLY MODE
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Failure with signal 11 from command: /u01/app/11.2.0.3/grid/bin/crsctl pin css -n oraclepruebas
Pin node (/u01/app/11.2.0.3/grid/bin/crsctl pin css -n oraclepruebas) ... failed
So, if i execute crsctl command, i have a nice Segmentation fault error, but if i try to execute another grid command, everyting is fine.
[root@oraclepruebas oracle]# /u01/app/11.2.0.3/grid/bin/crsctl
Segmentation fault
[root@oraclepruebas oracle]#
[root@oraclepruebas oracle]# /u01/app/11.2.0.3/grid/bin/ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 3
Total space (kbytes) : 262120
Used space (kbytes) : 92
Available space (kbytes) : 262028
ID : 756593197
Device/File Name : /u01/app/11.2.0.3/grid/cdata/localhost/local.ocr
Device/File integrity check succeeded
Device/File not configured
Device/File not configured
Device/File not configured
Device/File not configured
Cluster registry integrity check succeeded
Logical corruption check succeeded
This is weird, because i has installed a RAC 11.2.0.3 databases and standalone databases (all with grid) over Vmware and RedHat 6.4 and works fine. I have even compared the rpm packages between a functionally installation with this server and matched all !!!.
I think that i am making a mistake, but i can't see it. I wan't reinstall or clone a funcionally virtual machine, because i want to learn with my mistake.
I has googled too much and i searched into metalink but i can't find something similar.
I apreciate your help, suggestions, anything.I had similar issue while installing 32bit version by mistake. Just to checkyou have x86-64 in the filenames of oracle software distribution
p10404530_112030_Linux-x86-64_1of7.zip
p10404530_112030_Linux-x86-64_2of7.zip
p10404530_112030_Linux-x86-64_3of7.zip
Regards
Ed
http://erudans.blogspot.com
Maybe you are looking for
-
How to export photos from photo gallery to my iPad
How to export photos from photo gallery to my iPad
-
Microsoft TechNet Wiki SharePoint Guru - Winners for November!!
The results for November's TechNet Guru competition have been posted! Sorry for the delay copying over to the forums, busy times indeed! http://blogs.technet.com/b/wikininjas/archive/2013/12/16/technet-guru-awards-november-2013.aspx Congratulations t
-
IPod screen is white with lines
HELP! HELP! anyone? Hi guys i have a problem that i have never experienced before, here goes...i have a 30GB 5th generation iPod, i was playing music when i deceided to sync so music, When i connected it to the PC the screen just went *white with lin
-
APEX 4.0.2 Oracle 11.2.0.1.0 Hello, We are trying to retrieve the XML Schema for a Report Query. The following code example is working, but the 'xsd' parameter for p_document_format is not documented. Is 'xsd' a supported parameter value for APEX_UTI
-
HT1379 The dvd disc is not readable in my dvd superdrive
My macbook pro retina display is less than a year old as well as the external dvd superdrive. The dvd player has worked in the past. Now, when I plug it in to the USB port and put a dvd in the slot, approimately 10 seconds later, the computer repor