Match-Frame with merged clip doesn't work

I have a merged clip forged from one video clip (with four channels of audio) and two audio clips, so the resulting merged clip has six channels of audio.
Merged via in-point, everything's in synch, fine.
Edit the merged clip into timeline.
Match frame.
Problem:
It matches to a clip with the same name as my merged clip... but it's not my merged clip because it's only got the four audio channels from my video source clip.
I've tried different clips, tried linked or unlinked, same result.
To boot, if in the timeline I select only audio channel #5 (which was from one of the audio source clips) and match-frame, it matches to the same pseduo-master clip, but, is several frames or seconds off.
Ideas anyone?
thanks!

Interesting... if I make a merged clip and name it "Apple" then place it in the timeline, the timeline clip is also named Apple. If I then in the browser change the clip's name to "Brother" and put it again in the timeline, it puts in a clip called "Apple"; and the first clip in the timeline is also still called Apple. But if I delete the Apple clips from timeline, and now put in Brother clip, it puts in a clip called Brother..... as if it's not updating the name-change. So that's weird.
But, none of the name-changing affects the match-fame problem; it still fails.

Similar Messages

No three point edit with merged clips in Premiere Pro CC 7.2?

Hello Premiere Folk,
I've recently, as of last night, updated to Premiere Pro CC 7.2. I'm currently cutting a feature using merged 5K red raw clips. We were expereicning some weird things but were able to work around them. The update fixed to major problems we were having;
1. Bloating projects going from 808kb to 5mb for no reason.
2. Not being able to perform a match frame on merged clips.
The update fixed these issues, but don't throw on your party hats just yet. Within this update a fuction CRUCIAL to any editor has been taken away after you've performed a merged clip function... THE EDIT! Any time I make an in and out point in my source with a merged clip and an in and out in my timeline and try to do an insert edit via a hotkey, it just edits the entire clip in the timeline starting with a radnom in point! I was able to set an in and out in my source and just edit into the timeline but even that function has been taken away. Adobe please fix this! Yes the match frame with a merged clip works but dont take away editing basics!

This bug is NOT FULLY FIXED. I'm on a tight deadline so i'm not looking very hard online to see if i'm alone - so please forgive me for just posting here...
I'm using CC7.2.1 it's 1/21... very grateful that match frame FINALLY works on merged clips, but, again, this insert/overwrite bug is only PARTIALLY FIXED.
Insert/overwrite with merged clips on 3-point edit now works, but ONLY when cutting in BOTH merged video+audio... if you're just trying to cut in the audio from a merged clip using a 3-point/4-point edit via hotkey, it's a no-go.
I, for example, needed to re-cut in audio under some video with effects on it. So, I unpatched the video source completely and patched source audio tracks 1-4 to the appropriate sequence tracks. Upon hitting insert or overwrite multiple times, nothing responds. The only way to cut anything in from the source (merged clip) was to patch the source video back into the timeline on an unused video track, then cut ALL the tracks from the source in, I then had to delete the video track re-link the now free audio to the original video. Not a big deal, but annoying enough & waste of precious time on tight deadline.
So, yeah, I have a workaround but is still not appropriate to have a core function not work properly. Especially when I'm working with a very complicated timeline.
That said, thanks for keeping on top of our gripes, Mark.

Premerie Pro CC - have sound on timeline, yet when I export file i am missing sound in one tiny clip. Can I be related to working with Merged clips?

Hello Premerie Pro CC community,
I need help, I am working with merged clips (the video footage shoot with a DSLR and different audio recorders). I have a timeline in premerie with sound all finished. Everything was fine until I when and fine tuned some of the audio, just added key frames to correct and now when I export my sequence I am missing sound in one little clip of the entire mov.
Does it have to do with sound and editing with a merged clip?
I have tried to export in several different settings and still the same result, and when I look at my timeline the sound is all there.
I have until the end of Monday to figure what I have done incorrect
thanks
-DragonFly

In case it is a phase problem, try adding fill left effect to the faulty clip.

Out of sync indicator with merged clips?

Hi. I'll edit a fifteen minutes short film soon and I'd like to work with Première CC.
The film will be shooted with the new Sony F55 so I'll have to manage RAW files and xavHD files. I made some tests and Premiere read them perfectly.
But ... My problem is this:
I'll use the automatic audi sync to match my audio and my video. Then I'll merge them to have synced files.
I noticed that, once merged, there is no more out of sync indicator! Or is it?
I can't edit a complete short film if I don't have the out of sync indicator. It would be too dangerous.
It means that I'll have to work with the dinausor fcp7 with transcoded Applepro res files ... again!
I read that I could use Pluraleyes first, then bring the synchronized rushes into Premiere CC. But I think that it's a little bit stupid to be obliged to spend 200 euros and to loose time copying all the rushes knowing that Premiere could do it immediately
Any solution?
Thanx for help
Marc

That's not the only thing missing with merged clips. Copied from my previous discussion:
No Match Frame
No Replace Edits (picture matches, but audio gets out of sync)
And for that matter, NO out-of-sync indicators at all. None.
No making SUBCLIPS in the project panel (via source panel ins and outs). A subclip gets created, but it's not the part you selected.
No retention of MARKER comments. Once you select a new clip, the comments go POOF! Gone.
I just cut a 10 minute dialogue short with merged clips, and I can't think of a single time I knocked audio out of sync. But I was prudent in my technique.
If you need the functionality, 1) file a bug report and 2) use the PluralEyes method.

Trimming tool problems with merged clips

I'm trying to edit a filmstyle sequence with merged clips (created video and audio synched, then merged into new clips). This works fine, except when I try to trim edits in the sequence - the trim tool works, but the picture in the left and right trim windows jump to different parts of the clips being trimmed, and do not show the correct frames being trimmed. The trim tool works fine when used with unmerged clips, but somehow can't seem to work with the synched up clips
The footage being edited was shot on RED and is in pro rez 4:4:4 format.
Has anyone else experienced this problem? Is this a bug, or is there a way around this? Thanks for any pointers...

I created a new user account and trashed my preferences and I have the same problems. I created a new project, and new sequences. Same problems.
It only happens with 23.98 (batch reverse telecined using Cinema Tools) NTSC DV clips that have been merged with separate 24-bit 48 khz Quicktime audio clips (converted from BWF using BWF2XML). Clips that were captured from the tape with audio and video simultaneously don't have this problem. The discrepancies between the actual amounts trimmed and the white numbers in the trim windows are consistent. If it's off by 6:10 on a clip, every time I try to trim that clip it will be off by the same amount. But the number varies from clip to clip. It's generally 5-8 seconds.
If I try to trim only the audio, I don't have any trouble. If I trim the audio and video at the same time I don't have any trouble. It's only when I trim the video on its own. If I use the original video clip before it's merged with an audio track then it trims fine. If I cut the merged clip into a sequence then delete the audio track from the sequence the problem remains.

Help with merged clip decision for a short film

Greetings and thanks in advance for any perspective you can offer.
I've begun to edit a short film (10 minutes) that has 3 hours of dailies. The clips are all merged clips, created with dual system audio and synced with Plural Eyes 3.
However, before setting to what's sure to be months of work, I wonder if there was a better workflow. Bear with me. To begin with, marker comments do not stick with merged clips. As soon as you select another clip - poof! They're gone. And there are other limitations that may or may not affect me down the road. I guess I'm saying I'm not completely sure what I might want or need to do at some point, but I'm concerned that I'll be limited for using merged clips.
I've realized I can use Plural Eyes to merge my clips and audio fully outside of Premiere CC. Those clips, once imported, retain marker comments and suffer no other "unique" limitations.
It will be a massive undertaking to resync, re-import, and retag and organize everything - but perhaps in the long haul this is prudent? Or not?
I'm cutting with Prores 422 at full size 4K, so replacing media isn't a concern. Anything else I should be worried about? There's always a chance I'll use a 3rd party to color-correct with a DaVinci.
Thanks again.

I shoot for about -6dB, with no peaks above 0dB.
Sounds like you have a very weak signal. I'd set away from PrPro and handle this in SB, or Audition. Listen carefully with a good pair of noise-canceling headphones first, and then test on monitors.
Are you working in mono, stereo or 5.1 SS?
Good luck,
Hunt

Video clips doesn't work in new keynote

I recently upgraded keynote after installing os x maverick.
When I opened my previous keynote presentation, the new keynote asked to upgrade the movie quality.
And you have to click this option, otherwise the video clips will only come out as pictures.
But now, some of the video clips doesn't work. The thing is, I do not have the original video files as these are presentations given to me by others.
What's next for me?

Having the same problem, would greatlyu appreciate a fix. does it matter if one upgrades to the iOS or Mac Keynote options?

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card

LAN with TCP/IP doesn't work

Hello,
I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
Thank you very much

Perhaps you could describe you network in a little more detail.
Is this a Workgroup home network or are you connected to a Domain server?
If this is a workgroup are you connecting to the internet via a cable or DSL router?
Do other computers on your network connect OK?
Has your S10e ever worked properly on the network?
Are you connecting via a wireless access point or LAN cable?
What do you Ping on and from where?
Can you Ping OK on another networked computer?
Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address.

In day 4, video # Creating "pages" with Flex states doesn't work

i can't open video training http://www.adobe.com/devnet/flex/videotraining in day 4. it's name( Creating "pages" with Flex states ) doesn't work, it report error. supporter can look it and solve problem

Hi,
I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

More information please.
Version of Reader? OS? Can you open reader by double-clicking on its icon? Can you open reader by double-clicking on a pdf file? What programs are trying to open reader? Some programs might be restricting your ability to view pdf files using the Reader plug-in due to security concerns. If this is the case you need to find out how to enable the plug-in in the case of each application.

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Hello lila54,
It sounds like your Wi-Fi network is working if your desktop works with it, we just need to get the Wi-Fi on your iPhone and iPad connected to it. I found a couple of resources to help with not being able to connect to Wi-Fi on an iOS device.
I recommend following the steps in this tutorial first (the steps should work on the iPhone and iPad):
Join a network
http://www.apple.com/support/iphone/assistant/wifi/
If you are still having trouble connecting to Wi-Fi, follow the steps in this article (you can skip any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

12 tracks of audio on match frame to a clip captured with 2 tracks of audio

Hi. I'm new to FCP 5.1.4 but am very experienced in 4.5. My problem is the following:
Some of the clips I've captured using a Blackmagic DV NTSC Easy Setup appear to have captured correctly in the browser with 1 Video track and 2 audio tracks. They even open into the Viewer as such. When I drop the clip into a sequence and match frame back to the viewer, the clip suddenly has 12 mono audio tracks. Has anyone run into this?
The number 12 makes sense, because the Blackmagic DV NTSC setup gives me no other option than to have 12 tracks of audio, but when the footage is logged, it is logged as 1V, 2A.
I hope I'm providing enough info. Please let me know if you need to know anything else. Any ideas?

Might be the same, but I used to get 8 tracks in AJA. Turn off the tracks 4-12 in the clip settings tab in the log and capture window. You basically captured 10 empty audio tracks. Do this by clicking the green speakers next to the tracks. They should be grayed out, except the ones you want to capture.

CS6 Match Frame Problem, Sequence Clip vs Source Clip issue

Hey folks.
So, I'm on Windows 7, Premiere Pro CS6.
I've found an issue with Match Frame (Control F), it seems to be acting inconsistently. Sometimes when I double click on a clip in my sequence and hit F it brings up the sequence clip, other times it brings up the source clip (in the Source Monitor)
The problem here is that I'm placing markers on my sequence clips to line them up based on visual cues in the scene. This work fine for a while, but then, seemingly randomly, I'll double click a sequence clip and when I hit F it brings up the source clip, not the sequence clip. Now when I place markers they do not show up in the sequence because I'm marking the source clip not the sequence clip.
Anyone else encounter this? If needed I can try to capture video of this happening.
Thanks all,
~ James

Does this mean that it isn't possible to "Reviel in project", or otherwise locate a merged clip in the project window?
So far "Reveal in project", and "match frame", point to the same subfile of a merged clip... not very useful. What other options are there?
... A sad workaround is to type in the name of the merged file in the search frame at the top of the Project pain.
I guess this one for the feature request list.

Match-Frame with merged clip doesn't work

Similar Messages

Maybe you are looking for