"Match Hue" tool not working on FCP 7 (OS 10.9.2).

I have reset my preferences using Preference Manager. Restarted my computer. It worked fine on my old OS, but for some reason, cannot get it to work. If I use the eye dropper on white, or any color, it reads "black"... anybody else having the same problem? Anybody find a fix?

Unfortunately FCP7 is not really dependable in Mavericks. I tried for a while, but went back to SnowLeopard on my "vintage" MacPro. You don't say what computer you're working with. If possible, you might want to have an alternate boot drive for SnowLeopard for those times when you need this particular functionality.

Similar Messages

I just got a new macbook pro. How do I get the 900 songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

I just got a new macbook pro. How do I get the 900+ songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

Converting WordPerfect to PDF with desktop printer tool: Not working

I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
Please help again and soon, :).
Date: Tue, 7 Jan 2014 11:52:08 -0800
From: [email protected]
To: [email protected]
Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
    Re: Converting WordPerfect to PDF with desktop printer tool: Not working
    created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Please do following
(A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
(B). If you have not installed Adobe Postscript driver yet then please install one as below:
How to Install PS printer:
1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
2. Select "Add a local printer"
3. Select "Use an existing port: LPT1: (Printer port)
4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
Adobe PS driver files:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
(C) Go to the printer configure port and verify your Adobe ID and password
1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
2. Click right mouse to open “Printer properties”.
3. Select “Ports” tab
4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
5. Click “Configure Port…” button at the bottom
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
When printing to PDF you will see below and an email is delivered to your email inbox. The converted PDF file will be stored at https//files.acrobat.com.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
Thank you
Hisami
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Content aware move and extend tool not working in PSE12

Photoshop Elements 12 content aware move and extend tool not working with Yosemite upgrade.

Have you deleted the preferences and the saved application states?
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

CS5 Refine Edges tool not working how its suppose to

Hello everyone - well I like the title says refine edges tool not working right -
I open an image in photoshop - make a quick selection of a part of the image and then go into refine edges - Click on smart radious and when I use the brush to get a better selection that part becomes transparent - I tried seaching everywhere for an answer but noone seems to know
Thank you

Could you please post a screenshot with the pertinent Panels visible?
The videos you might have seen might simply be using images that lend themselves to the task better than your image.

Adobe XI - Hightlight text tool not working

Just downloaded adobe XI and the hightlight text tool not working. How can I get this to work.

I guess you can always use the box tool in drawing markups to draw a box around the text then play with the colors until you get close to what you want.
The only thing I don't like about that (besides it being a PITA) is that it covers the text with color as well where the highlight tool does not.

Paste and match style does not work in some cases

Dear Sir
My "Paste and Match Style" does not work with some sites.

What happens if you put table Table_1 into the Analytic View?
Also go ahead and and update HANA, Rev.60 is very old by now.

Shape Builder tool not working on shapes in a clipping mask

Hello again,
Why is the Shape Builder Tool don't work on shapes inside a Clipping Mask? The Pathfinder does work but for the Shape Builder Tool: NADA!
Thank's for answering,
Lindberg

Hi,
Thank you for answering. No it will work correctly. The Pathfinder work inside a clipping path and in any situation but not the Shape Builder Tool. Unless this is normal, I think that the specialist at Adobe should have a look at this annoying behavior and try to release an upgrade with this behavior corrected in a near futur.
Thank’s again for answering,
Robert Marchand
[email protected] <mailto:[email protected]>
Le 8 avr. 2015 à 10:41AM, Larry G. Schneider <[email protected]> a écrit :
Shape Builder tool not working on shapes in a clipping mask
created by Larry G. Schneider <https://forums.adobe.com/people/LarryG.Schneider> in Illustrator - View the full discussion <https://forums.adobe.com/message/7418340#7418340>
If you release the Clipping Mask and try the Shape Builder tool then, does it still balk at making the shape?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7418340#7418340 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7418340#7418340
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Visual admin tool not working

hii guys,
in my netweaver system visula admin tool not working .when ever im trying to connect with user id and password its showing like this.how can i solve this issue.plz help me

Hi,
Try to login to system info page with administrator or j2ee_admin for java and dual stack respectively to check if the password is correct.
If the password is incorrect, then check if you have any alternate admin ID. Change the administrator or j2ee_admin password, then try to login with the new password. Change the password of SDM and securestore to the new one.
If this is not the case, then check the log files in visual admin directory. Please post the same.
Cheers...,
Raghu

Why is Rectangle Tool's matching dimension feature not working?

With the Rectangle Tool's cursor is clicked in the document.
The Rectangle Panel appears.
A height dimension is entered.
With the pointer, the Width field is clicked.
Usually, the Height Value gets automatically entered in the Width field.
In this case it does not.
This same behavior is occuring in the Ellipse Tool.
What has changed?
Thanks
iMac 3.4Ghz 32 GB
OSX 10.8.2
Illustrator CS6

I may not have been clear on what is not working... the feature I am trying to create has been in Illustrator for several versions... another discusion on this site deals with the same problem...
see http://forums.adobe.com/message/4910715... it is explained...
'There has always been a one click solution, just like the help file says. Try it in CS5, click once with the tool, enter your width value, click on the word height, ill copies the width value into the height field, hit enter and you are done.'
it is this function that I have used for years.

Focusrite Saffire interface not working with FCP 4?

I can't seem to get my focusrite saffire audio interface to work properly with FCP? It works fine with all other apps (itunes, QT, Logic etc) and all the other Studio apps (Motion, DVD Pro and Soundtrack Pro) - but in Final Cut the sound is 'distorted' and 'jumpy'? All focusrite and FCP software is upto date.
Has anybody else had this sort of problem? Is anybody happily using the saffire with fcp? (I can't seem to find any on the search!)
it seems strange that it wont work with fcp but work with the other apps of the package? I can't see any sort of settings in fcp to solve this issue? Any help?!

I am actually only using it to play back audio 'syncd' with picture straight off camera or importing clips from quicktime/DVD's etc. in FCP - it is this that I can't hear correctly? (all the clips are fine by the way played in other aps etc)
Yes, editing is done in Soundtrack Pro or Logic Pro (used to have pro-tools mbox - but decided to ditch it and go down the Logic route with another interface!) - but I expect to be able to hear basic audio with picture in FCP?
Sample rates are matched?...

Polygonal lasso tool not working with stylus on Surface Pro 2

Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scott

same problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly

Adobe photoshop tools not working on a Surface tablet randomly?

I just installed CC Adobe photoshop on my Surface Pro 3 tablet and it has been nothing but frustration. For reasons I cannot discern, the tools do not work on my image at random times. I'll have smudges on one of the layers, and I choose the eraser tool and it won't erase anything in any layer. I can't draw anything with a brush or pencil either. In fact the tools stop working altogether. Yes the layer is active and visible, no it's not locked. Very frustrating, and I'm at wits end. The only thing I've been able to do is save my work in stages, and go back to the previous stage if this happens. Is there a glitch on the Surface pro 3 with photoshop that causes it to not respond?

I was having the same trouble, so i went to Adobe Help's Preferences > General Settings and switched to Display Local Help content only = Yes. As it says there, it disables the online links, but if you have an updated version of Help downloaded, it's easier and quicker anyway than the online system, and likely all you were needing anyway. You can always turn it back on later.
Brad

"Match Hue" tool not working on FCP 7 (OS 10.9.2).

Similar Messages

Maybe you are looking for