Match Merge error after migrated to OWB 10.1.0.4

My old mappings which were running fine are giving match merge errors after uograded from 10.1.0.2 to 10.1.0.4.
getting following error while deploying into new repository (10.1.0.4).
any suggestions please....
ORA-06550: line 856, column 17:
PLS-00103: Encountered the symbol "=" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null was inserted before "=" to continue.
Thanks
Arvinda

I did some more analysis. The error does not occur with new repositories, that are created with the Repos-Wizard after Software was upgraded to 10.2.0.2.
However, it does occur with all repositories that were migrated from 10.2.0.1 to 10.2.0.2, using the upgrade script as described in the patch set's installation notes.
The problem persists, even when the profiling user (i.e. schema) is removed, and a new one is initialised by the Design Client.

Similar Messages

Configuration Frozen Error after migrating to Weblogic 11g console extensio

We are using the console extension property of weblogic.
The jar used to deploy the same works fine with weblogic9 but gives the below error after migrating to Weblogic 10.3
The project also uses struts-Tiles configuartion. Is there any specific configuration to do after migration with respect to console extension?????
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at org.apache.beehive.netui.util.internal.ServletUtils.throwServletException(ServletUtils.java:165)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:582)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1230)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
... 63 more
Caused by: java.lang.IllegalStateException: Configuration is frozen
at org.apache.struts.config.ForwardConfig.setPath(ForwardConfig.java:191)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processForwardConfig(ConsolePageFlowRequestProcessor.java:145)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
... 72 more

After more investigations I have more details:
1. the error does not occur if the base table does not have rowSelection=”single”
2. the error does not occur if the base table has rowSelection=”single” but the popup is raised with showPopupBehavior
3. the error only occurs when the base table has rowSelection=”single” and we call the popup as inline popup (taskFlow with jsf page)
I could not reproduce the error on a newly created application in Jdevelope 11.1.2.1, it only happens to migrated applications.
We can not give up to rowSelection=”single” because of master-detail structures.
Thank you,
Monica

Dump error after migration.

Dear Members,
The driver program for the smartfrom which I have created is throwing a dump error after migration to another server, please suggest me a solution.
Thanks,
Subhendu Gouda

Hello Subhendu,
Just pass the FM name of your smartfom using a variable like "w_fmodule".
* Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSUBHENDU_TEST',
w_fmodule TYPE rs38l_fnam,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION w_fmodule
EXPORTING
control_parameters = w_cparam
output_options = w_outoptions
IMPORTING
job_output_info = t_otf_from_fm
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this solves your issue.
Cheers,
Suvendu

Session expired error after migration 11.1.1.1

We are taking a lots of session expired error after migrating our projects from 11.1.1.1. to the 11.1.1.0
How can we control session parameters in Jdev 11.1.1.1 and Web logic 10.1.3.1 ?
Thanks.

Hi,
its still the same setting in the web.xml file. However, I think the expiry you mean is the one raised by the client framework. As far as I remember there is no way to configure itslength. I'll take a not to see what the plans are in this regards. Can you confirm that its not the serve expiry but the message you get from ADF Faces RC?
Frank

The value returned from the load function is not of type numeric errors after migration to Coldfusion 11

I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?

This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">

<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>


<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>

<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>

<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
   this.sCountryName = "";
   this.sISOCode = "";
   this.sDHLCode = "";
   this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>


<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     if(isDefined("session.afr")){
      whichOne = "#session.afr.getsAFRNumber()#";
     } else {
      whichOne = "";
     iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
    </cfscript>
   <cfset this.iErrorID = iErrorID>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="get" datasource="#sDatasource#">
    SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: get: #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>

<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>

<cfif not checkID.recordCount>
   <cfreturn this.add()>
<cfelse>
   <cfreturn this.update()>
</cfif>
</cffunction>

<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>
<cftry>
   <cfquery name="add" datasource="#sDatasource#">
    SET nocount on
    INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
    VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
    SELECT @@identity as autoID
    SET nocount off
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: add: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>

<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
    AND idCountryID <> #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="update" datasource="#sDatasource#">
    UPDATE tblCountry
    SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
    sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
    sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: update: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>

<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="checkDependancies" datasource="#sDatasource#">
    SELECT idCountry
    FROM tblAddress
    WHERE idCountry = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("That Country is being used by an address, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="delete" datasource="#sDatasource#">
    DELETE FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent>

Open role permission error after migration EP6 to EP7

Hi all,
After migration from ep6(WAS 620) to EP7, there are some roles which can't edit permission by content administration.
The error message appears when open edit role permission.
========================= Error Start Line=========================================
ERROR: updateParentData - aclHandle is null for objectID - null
Exception ID:05:29_23/06/08_0006_9615650
EXCEPTION
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.aclEditor
Component class : com.sap.portal.admin.acleditor.ACLEditor
User : Administrator
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NullPointerException
at com.sap.portal.admin.editor.pane.OutPane.calculatePEObjectId(OutPane.java:210)
at com.sap.portal.admin.editor.pane.OutPane.createEditorLayout(OutPane.java:256)
at com.sap.portal.admin.editor.pane.OutPane.setupComponent(OutPane.java:150)
at com.sap.portal.admin.editor.pane.EditorPaneWrapper.mySetupComponent(EditorPaneWrapper.java:143)
at com.sapportals.admin.wizardframework.components.FlowContainer.setupComponent(FlowContainer.java:129)
at com.sapportals.admin.wizardframework.core.TrivialPaneFactory.getComponent(TrivialPaneFactory.java:35)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:229)
at com.sap.portal.admin.editor.Editor.doWizard(Editor.java:605)
at com.sap.portal.admin.editor.Editor.run(Editor.java:150)
at com.sap.portal.admin.editor.AbstractEditorComponent.doContent(AbstractEditorComponent.java:59)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
========================= Error End Line=========================================
Does anyone have idea about this problem ?

close

Buffer to small ORA-22835 error after migration from 9i to 10g

Hello Oracle-Experts,
I had to calculate hash-values for a corresponding clob-field which worked with oracle 9i (9.0.2.1)
After migration to oracle 10g (10.2.0.1.0) I get an ORA-22835 error (Buffer too small for CLOB to CHAR conversion.
Here is the output for the 10g version:
     SQL*Plus: Release 10.2.0.1.0 - Production on Mi Jun 13 16:19:28 2007
     Copyright (c) 1982, 2005, Oracle. All rights reserved.
     Verbunden mit:
     Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
     With the Partitioning, OLAP and Data Mining options
     SQL> CREATE TABLE test_conv (value CLOB);
     Tabelle wurde erstellt. (Table created.)
     SQL> DECLARE vLong LONG:= LPAD('M',4400,'M');
     2 BEGIN
     3 INSERT INTO test_conv(value) VALUES (vLong);
     4 END;
     5 /
     PL/SQL-Prozedur erfolgreich abgeschlossen. (PL/SQL procedure successfully completed.)
     SQL> SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv;
     SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv
     FEHLER in Zeile 1:
     ORA-22835: Puffer zu klein für Konvertierung von CLOB zu CHAR oder BLOB zu RAW
     (tatsächlich: 4400, maximal: 4000)
     (Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 4400, maximum: 4000))
This is the result with     9i
     Verbunden mit:
     Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
     With the Partitioning, OLAP and Oracle Data Mining options
     JServer Release 9.2.0.1.0 - Production
     SQL> CREATE TABLE test_conv (value CLOB);
     Tabelle wurde angelegt.     (Table created.)
     SQL> DECLARE vLong LONG:= LPAD('M',4400,'M');
     2 BEGIN
     3 INSERT INTO test_conv(value) VALUES (vLong);
     4 END;
     5 /
     PL/SQL-Prozedur wurde erfolgreich abgeschlossen. (PL/SQL procedure successfully completed.)
     SQL> SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv;
     DBMS_UTILITY.GET_HASH_VALUE(VALUE,1,POWER(2,30))
     478332438
Any help is appreciated.
Best Regards
Matthias

You have hit a bug, 3984527 - CLOB LARGER THAN 4000 INSERTED INTO VARCHAR2(4000) COLUMN IS.
You may want to check this metalink note: Note:388512.1 for further explanation and workarouds.
From the error message manual, Verbatim:
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: string, maximum: string)
Cause: An attempt was made to convert CLOB to CHAR or BLOB to RAW, where the LOB size was bigger than the buffer limit for CHAR and RAW types. Note that widths are reported in characters if character length semantics are in effect for the column, otherwise widths are reported in bytes.
Action: Do one of the following:
1. Make the LOB smaller before performing the conversion, for example, by using SUBSTR on CLOB
2. Use DBMS_LOB.SUBSTR to convert CLOB to CHAR or BLOB to RAW.
~ Madrid.

Error after migrating new copy control routine

Hi,
I have created a new copy control routine in dev environment. It works fine there. When we migrated the transport to all QA environments getting dumps that the form is missing. I checked the routine and form in VOFM and it does exists. Am I missing a step here or need to do something after migration?
-Minhaj.

go to se38 enter program name RV80HGEN - execute.
You need to generate newly created routines
You have to do this in each client where you transport this.
Edited by: Sampath Kumar on Nov 5, 2009 10:36 AM

Profiling Error after Upgrade to OWB 10.2.0.2

Hello,
I upgraded a 10.2.0.1 OWB installation to 10.2.0.2 and the database used for design to 10.2.0.3 with the respective OWB- and DB-patch-sets. At first everything looked fine, but when I tested the data profiling I ran into an error. Here's the excerpt from the OWB log file:
2006/12/10-14:44:44-CET [64F6CD] AuditId=1646: Request completed
2006/12/10-14:44:47-CET [60E128] Thin driver connection time - 3235 millisecond(s)
2006/12/10-14:45:32-CET [1EC8909] java.sql.SQLException: ORA-00942: table or view does not exist
ORA-06512: at "OWB10201.WB_RT_PROFILE_SERVICE", line 1617
ORA-06512: at "OWB10201.WB_RT_PROFILE_SERVICE", line 1263
ORA-06512: at line 1
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:743)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:215)
     at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:954)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1168)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3285)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3390)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4223)
     at oracle.wh.runtime.platform.operator.data_profile.NativeDataProfileOperator.execute(NativeDataProfileOperator.java:395)
     at oracle.wh.runtime.platform.adapter.rtp.NativeExecutionAdapter.execue(NativeExecutionAdapter.java:43)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:70)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:534)
2006/12/10-14:45:32-CET [1EC8909] report_execution_result auditId=1626
2006/12/10-14:45:32-CET [64F6CD] Free Memory(bytes)=715328 Total Memory(bytes)=2883584 Used Memory(bytes)=2168256 Used Memory(percent)=76%
2006/12/10-14:45:32-CET [64F6CD] AuditId=1626: Request completed
Some table or view that's called in the wb_rt_profile_service package is not there or at least not accessible by the profile user.
The error occurs only when referential analysis is done. I tried it on different DB instances and OWB repostitories. I consistently got the same error.
Did anybody experience that already? Any explanations or workarounds for me? Help and/or advice are appreciated. Thanks in advance.
Regards Holger

I did some more analysis. The error does not occur with new repositories, that are created with the Repos-Wizard after Software was upgraded to 10.2.0.2.
However, it does occur with all repositories that were migrated from 10.2.0.1 to 10.2.0.2, using the upgrade script as described in the patch set's installation notes.
The problem persists, even when the profiling user (i.e. schema) is removed, and a new one is initialised by the Design Client.

Error after migration to Crystal Reports 12 for existing reports

Hi,
We had reports written using Crystal Reports Version 8.5. These reports were not modified for a long time. Recently, we had migrated to Crystal Reports 12 (2008). Some of the these existing reports were modified using the Crystal Reports 2008 designer. After installing our application (we ship Merge Module of Crystal Reports 12 i.e. 2008 which gets installed in GAC)
1) If we create new reports in 2008 designer and try to view these reports, it works as expected without any issue(s).
2 ) However, if these modified reports are tried to be viewed, there is an error which states "Database Logon Failed".
Details:
CrystalDecisions.CrystalReports.Engine.LogOnException     {"Database logon failed."}
ErrorID     CrystalDecisions.CrystalReports.Engine.EngineExceptionErrorID.LogOnFailed
InnerException     {"Database logon failed."}
Message      "Database logon failed."
Source     "CrystalDecisions.ReportAppServer.DataSetConversion"
Stack Trace        at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
TargetSite     {Boolean ThrowDotNetException(System.Exception)}
Also, it is worth to note that if we try to view these modified reports from any environment which has both Crystal Reports 10 and Crystal Reports 12 in GAC, then these reports work as expected.
P.S. We have mechanism in application's code to reset the database connections when any report is being viewed using ReportDocument class' method.
From the above scenario I believe issue is specific to migration to Crystal Reports 12 (2008). Any help /workaround to solve this problem will be highly appreciated.

Make sure you have the latest SP for CR 2008 installed;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ensure you are deploying SP 2 runtime;
MSM
https://smpdl.sap-ag.de/~sapidp/012002523100009159092009E/cr2008sp2_mm.zip
MSI
https://smpdl.sap-ag.de/~sapidp/012002523100009159002009E/cr2008sp2_redistinstall.zip
If that does not help;
1) Do these reports work in the designer?
2) What database are you using and what is the connection type?
3) Compare the dlls loading on the systems where this app works (environment which has both Crystal Reports 10 and Crystal Reports 12 in GAC) and a system that is giving you the error. Use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
4) Open the reports in the designer and look at the properties in the Database menu -> Set Datasource Location. Check to see if there are any differences between the two reports.
5) If there is a subreport in the report that causes the issue, remove it and see if the report works without the subreport.
Ludek

SBS 2008 - SBS Console and AD errors after migration to new hardware

Hi there,
I'm trying to work out how to fix some of the errors and random behaviour I'm experiencing with the SBS 2008 console and AD related matters since I had to quickly migrate SBS 2008 to new hardware using Windows Server Backup after a failure of the old server.
In my haste to get our email and ftp services back up and running (which use Smartermail and Filezilla respectively instead of Exchange etc) I overlooked the fact that the new server had 3 NICs installed and not one and so restored SBS 2008 and loaded up new
drivers for those and other hardware that had changed (such as the graphics card and mobo. I have since removed the two additional NICs by disabling them on the mobo).
Whilst I got the server up and running again with email and ftp services, even though I currently don't use any AD related stuff directly I have since noted that if I try to say view a list of users that I had previously created via the SBS console, more often
than not it will show no users, and then randomly it will (but when you do see them you can't edit or delete them. I'm aware that I have probably broken a number of golden rules in doing this 'migration' but having a metaphorical gun to my head meant that
I rushed things out of desperation.
Common errors that I experience generally will say things like 'Current security connect is not associated with an Active Directory domain or forest' if I try to list users, or DC not found for domain "xyz.local' etc. I have been searching the net and
trying out some things to fix this but I'm like a dog chasing its tail as I'm not so clued up on server related issues as I am with workstation problems, so if anyone could at least point me in the right direction I would be very grateful. If you require any
info from me (eg diag logs etc) I will be happy to provide them!
Regards,
Dave

Hi Dave,
Based on current situation, please run SBS BPA and fix all that it can find, then monitor the result. For more details, please refer to the following KB.
Windows SBS Best Practices Analyzer (BPA)
Meanwhile, please refer to the following article and repair SBS console.
Repair the Windows SBS 2008 Console
By the way, I noticed that you had got some error messages (such as: “DC not found for domain” and so on). Would you please let me know complete error messages? In addition, when you migrate SBS 2008 to the new hardware, had you done any preparation for
that Source Server? For more details, please refer to the following article.
Migrate Windows Small Business Server 2008 to New Hardware
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Assertion failure error after migration to 11g (11.1.1.5)

Hi All,
I am facing an issue here after we migrated from 10g to 11g (11.1.1.5). Few reports shows following error.
Error Codes: OAMP2OPY:ACIOA5LN
Assertion failure: isXsiTypeSqlExpression(rExpr) at line 67 of /scratch/aime1/adestore/views/aime1_dadvfa0112/bifndn/analytics_web/main/project/webreport/exprformulautils.cpp
Any workaround/fix for this error?
Regards,
Rajesh

Hi Rajesh,
We had the exact same issue occur in 11.1.1.5 as well. Our problem was due to the fact that our report was referencing a saved filter, and in that saved filter, we had a line that was a SQL based filter just like Haris mentions in this thread. We could not get a saved filter with an SQL filter line to work (even creating it from scratch), so I believe this is an 11.1.1.5 bug.
We got around the problem by applying the contents of the saved filter, instead of the filter reference itself. Once we did that, the SQL filter line worked just fine.
Please let me know if this works for you.
Thanks,
Jeremy
Here's the first thread I posted this to:
Re: Drill not working after miagrating (from 10g to 11.1.1.5 )

IMessage error after migrating from old hard drive

After I used migration assistant to transfer my user account from my old hard drive to my new one, every time I try to use iMessage, I get this error
Does anyone know how I can fix this?

Hi,
With that messages there is no other option than doing what it says.
At the beginning of Mountain Lion it was Free, but now people are reporting that Apple are charging for the phone call.
9:50 pm Tuesday; February 18, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

ValueList function error after migrating CF8 to CF10

Hi All,
We are migrating our reports from CF8 to CF10. (uninstalled existing CF8 and installed CF10) in 32bit OS.
After upgradation of CF10, tried to open our report, then we got the below error.
----------------------error --------------------------
The ValueList() function has an invalid parameter: DS_ODBC_LIST.entry.Parameter 1 of function ValueList which is now DS_ODBC_LIST.entry must be pointing to a valid query name.
------------------error-----------------------
-------------original code -----------------------------------
<CFREGISTRY
    ACTION=GETALL
    NAME="DS_ODBC_List"
    TYPE="ANY"
    BRANCH="HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI">
<cfset DSNnames = valueList(DS_ODBC_LIST.Entry)>
-----------------------------original code--------------------------
Then tried to dump / print the DS_ODBC_List using CFoutput/cfdump then we got error like:
Variable DS_ODBC_LIST is undefined
in CF Administrator the tag CFREGISTRY is in enabled tags list.
can some one suggest me what the alternate tag / any patch I can use to solve the issue ?
Thanks in advance!!!

At a guess it may be choking on the underscores in the query name. You could try referencing it like:
<cfset DSNnames = valueList(variables["DS_ODBC_LIST"].Entry)>

Login error after migration from Snow Leopard to Lion

I went through the migration process to get all settings and data over from my MacBook (10.6.8) to my new Mac Pro (10.7.3). During the migration, I was logged into the old MacBook with my FileVault-enabled account. Migration completed successfully, but when I tried to log into the new Mac Pro, I got this error:
"You are unable to log in to the FileVault user account "user1" at this time. Log in to the account failed because an error occurred." [OK]
When I typed a password I knew was incorrect, the login box would do the familiar shaking. When I typed the correct password, I got the behavior above.
I was able to log in to the new Mac Pro as a different user (user2), even though user2 also had FileVault enabled on the old system.
When logged in as user2 on the new system, I was able to escalate privileges by authenticating as user1, so I knew the password for user1 was working. I gave user2 admin privileges and saw that user1's data had been copied over, but not as a sparsebundle - presumably because user1 was logged in at the time of migration.
To fix the login problem, I did the following:
1) Logged in as user2 on both source and target system, then escalated privs to give user2 admin rights.
2) Copied /Users/user1/user1.sparsebundle from source to target system:
     - On target system, in System Preferences -> Sharing, enabled Remote Login for user2
     - On source system, opened Terminal window and typed:
     $ sudo -s
     > [password for user2]
     # cd /Users/user1
     # scp -rp user1.sparsebundle user2@IP_address:
    (where IP address is the actual IP address of the target system)
     > [password for user2]
3) Moved aside the unencrypted files in user2's home directory:
     - On target system, logged in as user2, in Terminal:
     $ sudo -s
     > [password for user2]
     # chown -R user1 ~/user1.sparsebundle
     # mkdir /tmp/user1
     # chown user1 /tmp/user1
     # cd /Users/user1
     # mv * /tmp/user1
     # mv .[a-zA-Z]* /tmp/user1
4) Moved the user1.sparsebundle into place (in same Terminal window on target system):
     # chown -R user1 ~/user1.sparsebundle
     # mv ~/user1.sparsebundle /Users/user1
5) Logged out of user2 account and logged back in as user1
6) Securely deleted the unencrypted files for user1 (in Terminal window as user1):
     $ srm -rf /tmp/user1
Many thanks to @neirbowj for the analysis of why the migration failed!

Go get a powered USB hub and try that. Lion may have issued a fix for devices drawing too much power, by cutting them off.

Match Merge error after migrated to OWB 10.1.0.4

Similar Messages

Maybe you are looking for