Match not made in heaven!

I subscribed to iTunes Match a few years ago. In January of 2013, I did not renew my subscription as I left Apple to the land of Sony. Yesterday, I purchased a new iPod Touch looking forward to returning to the world of iTunes. Upon subscribing to Match again I have discovered all my music is literally gone, and the only songs available are those I purchased and none of my ripped CDs etc arethere anymore. Is this normal?

Hi,
Yes.
Once match expires you lose access to all music in the cloud except for iTunes Store purchases. It is up to you to make a back up of your music. The music needs to be in your iTunes library when you resubscribe to match.
Jim

Similar Messages

Maxtor 3200 v Apple Mac - a love not made in heaven!

I have a Maxtor Personal Storage 3200 external HD which I was using as a Time Machine. The ex-HD is connected to the Mac directly via a USB cable. Recently, the Time Machine has stopped backing up files full stop.
I have tried the following steps, but "com.apple.TimeMachine.plist" does not exist in the library and the Mac does not even recognise the ex-HD on the system.
Open Macintosh Hard Drive > Library > Preferences
Locate the "com.apple.TimeMachine.plist" file and delete it
Restart your computer
Open System Preferences (gear icon on the dock)
Click Time Machine
Setup Time Machine again by choosing your drive as the destination and click Use for Backups
Grateful for any other suggestions.

you are looking in the wrong library for the plist. you need the one at the top level of the drive, not in your home directory. but if the system does not see the drive the plist is not the problem - the drive is. do you see the drive in disk utility? if yes try repairing it with disk utility. repair disk, not permissions.

Apple TV says "you have not made any purchases" after country location change

I moved country from UK to Australia and changed my itunes as such, all my other devices have worked and have purchased iTunes Match again, however my Apple TV says "you have not made any purchases" in the purchased movies section, when I had quite few from the UK. I still have these on the laptop and can view them by home sharing but wanted these to be available on the Apple TV as I originally purchased them. Pease could someone help.

I moved country from UK to Australia and changed my itunes as such, all my other devices have worked and have purchased iTunes Match again, however my Apple TV says "you have not made any purchases" in the purchased movies section, when I had quite few from the UK. I still have these on the laptop and can view them by home sharing but wanted these to be available on the Apple TV as I originally purchased them. Pease could someone help.

"This accessory is not made to work with iPhone"

I have a first generation iphone. It recently started showing a message that reads:
This accessory is not made to work with iPhone
Would you like to turn on Airplane Mode to reduce audio interference?
You will not be able to make call during this mode
YES NO
There is no accessory in the phone. Any thoughts on how to stop this behavior?
I tried reloading the OS and it didn't help.

I was having the same problem and it was draining my battery! After reading a couple of threads I was resigned to take my 1st gen iphone to the genius bar to see if they could do something. Before going to the bar I took off my pics, videos, movies, podcasts, and some applications in preparation for my visit. That night the problem stopped. This had been happening for about 3-4 weeks so I could replicate at will. After removing things from the phone when I tried to replicate the problem it would not happen. So I then started to re-sync things one at a time. After re-syncing everything but the applications I still could not replicate the problem. My feeling is that one of the applications, or combinations of, was causing the issue. I have not re-synced all the applications at this time because I am happy to have my phone back. Hope this helps.

Iphone will not charge via usb-to-computer nor via brick; I've tested with two different cables. Just before this problem arose, I got messages similar to "This accessory is not made to work with iPhone."

Most of my concern is in the subject line. I probably should've saved some content to include here. Allow me to elaborate:
While traveling with the tiny brick, I got a message on my 3GS phone that "This accessory is not made to work with iPhone”; however, the charger was working fine with another phone and with an iPad.
I tested alternatives by removing and re-inserting the cable (obviously, as I tested other devices), changing wall receptacles, shutting the phone off (all the way), all to no avail.
When I got home, I plugged a different cable--one that was connected to my iMac rather than the brick--into the my 3GS; it still didn't charge.
So, I'm hypothesizing that perhaps some debris (from a pocket?) got into the charging receptacle of the 3GS and is disrupting the connection. Perhaps there are other hypotheses.
I am reluctant to do a reset, as (a) the problem doesn't appear to be a software issue (the phone and software are all working, though the charge is declining) and (b) I don't want to lose the contents before I can sync it (now that I'm home, again).
I'd welcome suggestions. Meanwhile, I suppose I shall e-mail photos and notes from the phone to myself before I lose the remaining charge.

Try to clean the 30-pin receiver slot either by blowing air into it or using a microfiber cloth. If the problem persists, based on what you've already said, I'd say the problem is most likely hardware, and would need to be replaced or repaired. I hope your iPhone is still under the 1-Year Manufacturer Warranty, or if applicaable extended warranty. You can check by calling AppleCare National iPhone Technical Support at 1 (800) 694-7466.

Access Not Made (Initialized Field)

Hello Experts,
I have come across a generic problem. I have defined a new field (material Type - MTART) in the field catalog and included the same in the new condition table (Country / Destination country / Material type / Cust tax cla / Material tax cla ). The condition table is included in the already defined access sequence. This access seuqnce is assigned to the tax conditn type ZWST.
A condition record maintained for the conditon type ZWST for newly defined access. When I create a sales order, the ZWST condition type is not picking up the record maintained for this access. Error message - 102 Access not made (Initialized field)
Subsequently, thecondition value from the next access is picked up.
Question - Did I miss any step during creation of a new field in the field catalog?
Thanks in advance for your kind help. Be assured to get the full points if answered satisfactorily.

Hi
Error message - 102 Access not made (Initialized field)
If you are getting this msg in a sales order in the analysis why a particular condition type value has not been picked
Then this will not be a Error message and also not warning message
There will be a yellow exclamatory mark
Access not made (Initialized field) conceptually means
Suppose if you maintain a condition record say a condition type ZR00 for a sales org 1000 and DC 10 for a material X the price is Rs1000
Now in sales order the value for ZR00 is not coming and the message is Access not made (Initialized field)
This means that in the sales order either sales org is not 1000 or DC is not 10
Simply it means that condition record is maintained for sales org 1000 and DC 10 but your sales order is not created for those data
hence the access is not executed because the initialized fields sales org 1000 and DC 10 is missing
Hope you are getting my point
If it is understood then you can analyze your sales order and solve your error
Reply whether this input has been useful to you
Regards
Raja

In April 3o,2012 and May 9,2012 some purchases of $38.75 and $24.51 were made and they were not made by me because i never spend that much. Thing is that on February 7,2012 my ipod was stolen and i havn´t gotten it back since, i need to know who did this!

In April 3o,2012 and May 9,2012 some purchases of $38.75 and $24.51 were made and they were not made by me because i never spend that much. Thing is that on February 7,2012 my ipod was stolen and i havn´t gotten it back since, i know have a new ipod and have made some purchases but never that much. I need to know who did this !!!!!!

The most immediate thing you need to do is to call your credit card company and report the unauthorized charges. Your card company can contact Apple if they need additional information.
Next, log into your iTunes Store account and see if the purchases are reflected in the Purchase History. If they are, immediately change the password to your iTunes Store account, making sure it's not something easily guessed or looked up. Then go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Whether or not they'll do anything for you I don't know, particularly if you didn't change the password after your iPod was stolen.
If the charges are not reflected in the Purchase History, then it's most likely a fraudulent charge to your credit card directly rather than an unauthorized purchase through your iTunes Store account in which case it will be up to your bank to handle.
Regards.

After 2.0 upgrade: "This accessory not made..." error

I upgraded my iPhone to 2.0 today, and ever since the error:
"This accessory is not made to work with the iPhone" constantly (well, at random, frequent intervals) appears, together with the annoying offer to turn on airplane mode. Nothing is plugged in at the time.
I have tried using an air duster to check that there is no lint in the docking port.
This started happening exactly at the time that I upgraded the firmware.
Has anyone else had similar problems?

I experienced this before and I did a restore on my iPhone but didn't resolve the issue, I had to send my phone in for service.

ITunes match not updating on devices

Help. Please.
itunes match not updating. iTunes on computer has appropriate songs/ albums. But on iPhone and ipad changes do not appear. I have tried holding down shift key when turning off iTunes Match, signing out of iTunes Store, then quitting itunes. I then start itunes, sign into store, then turn on iTunes match and it goes through lengthy scanning, hours, and I am left with the matching page showing the three stages of iTunes Match greyed out, with a button offering me to start it again. Re
i have repeated this process several times, switching off iTunes Match on devices before starting iTunes Match on compute - same problem. I have changed albums while iTunes Match is on, as recommended by apple's webpage.
please advise on how to update iTunes match so this change on computer also happens on devices. Thank you in advance
xen

Dear Jim
thank you so much. Thank you for your quick reply, sorry I did not respond sooner, but I wanted to make sure it worked before replying, hence I had to wait for iTunes Match to do its thing.
You are are a genius Jim, so a big thank you.
So in a nutshell for all, Jim's solution works for those who have gone over their 25,000 limit by mistake, and are unable to update match, you can with Jim's solution, delete stuff in the iTunes Match cloud and in effect have your original iTunes Match library as you want it.
Thank you Jim
Xen

FOR A PROJECT I NEED 2 PRINTER THAT IS NOT "MADE IN CHINA"

hi,
we are a engineering company based in TURKEY.
We got a projectabroad but they insist us not to use any "made in china" products even printers. we have to find 2 printers whicH is not made in China.
PLEASE CAN YOU DIRECT US SOME SELLERS OR HP PRODUCTION DEPARTMENT
THANKS IN ADVANCE
here is what they want:
1) Alarm/Event printer:
it shall be black and white letter quality laser printer.
it shall have a speed of 10 pm or greater in draft mode.
black ribbon (quantity 4)
the printer shall be HP Laser Jet or equal
WE CHOSE FOR THIS ONE : HP Q5401A LASERJET 4250 N
2) Color and report printer:
shall produce Ink Jet quality monochrome print at min. output rate of 10pm
shall also produce InkJet quality color prints with a min. resulation of 1200 dpi at min rate of 6 pm.
shall be RISC based and support ethernet connectivity
shall be supplied complete with a min of 128 MRAM interconnecting parallel cable and spare monochrome and color toner cartridges.
shall be HP INK JET Series
WE CHOSE FOR THIS ONE :HP CB041B OFFICE JET K1700 COLOUR INKJET
This question was solved.
View Solution.

Almost all HP printers are manufactured in China, Malaysia and Thailand and Mexico. Their serial Numbers will start with CN, MY, TH and MX respectively. I'm not sure of how to obtain printers from a specific location from any HP outlets. You'll probably have to go to the store and view the Serial number on the box before buying it.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Error 102 Access not made (initialized field) during pricing analysis in item level of Sales Order

Hi SAP Experts,
Good day!
I am facing an issue in Pricing Analysis of a Sales Order Item level which is Error 102 Access not made (initialized field).
Details for ZICT condition Type:
Access Details:
*ZINTER is originally used in billing and was decided to also use for order.
There is no problem involved in billing.
Please take note that I already found other discussions and an OSS Note regarding this issue and applied the suggested solution. But still I encounter an issue in the order created.
After implementation of the proposed solution which is moving Material type(MARA-MTART) and Valuation Class(MBEW-BKLAS) to the corresponding fields TKOMP-MTART and TKOMP-ZZBKLAS.
ZICT Condition Type details:
Access details:
As I mentioned above, I already followed steps in previous discussion. It seems odd that there is still a problem. Can you please enlightnen me up and advice if there are things that I still need to know.
I am hoping for your response and help with this matter.
*NOTE: The development Box that I am using is an ECC6 Upgrade development system

Hi Please find the attached screenshot. Hopefully this will be of help.

I installed itunes on anew computer. The store says i have not made any purchases but I have.

I installed itunes on a new computer.
I registered my apple id
the app store says I have not made any purchases.
i have made many.
How do I update apps?

You've checked the purchase history on your account e.g. you haven't made any in-app purchases and don't have any auto-renewing subscriptions ?
You can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material.

What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material. Apple does not make one this long. Is there a cable out there that is sturdy like this and is safe to use?

yes, but I'm trying to use my iPad to type notes (using pages) and I have the smart case which I use as a stand. I need a cable long enough to fit through the back of my desk and the charging brick for the iPad won't fit behind the desk. I have to put it on the floor and then the apple cables aren't long enough to reach.

HT5085 iTunes Match not upload songs.

iTunes Match not upload songs.
Done "Step 1: Gathering information about your iTunes library" and freeze.
Please advise how to solve this problem.

you are not alone
iTunes Match doesn't upload my songs?
Match process stalling out at end

This accessory is not made... error

Greeting folks,
My iPhone has been wacky! Out of nowhere it shut itself down whiel in the middle of a song. Then after I plugged it in for a while it finally came back on. However, now every few minutes or so the "This accessory is not made to work with iPhone" message comes up. The thing is, I have not been plugged into any accessory in weeks. And before you ask, yes I reset the phone.

Hey Jorva,
Try using a small brush, like a toothbrush, to remove any debris from the dock adapter.
What accessory did you have the iPhone plugged into? Did it have the "Works with iPhone" logo?
http://support.apple.com/kb/HT1665
If its not caused by debris, make a reservation to have a Mac Genius take a look at it.
http://www.apple.com/retail/
Jason

Match not made in heaven!

Similar Messages

Maybe you are looking for