"Match Whole Keyword Only" BADLY needed!

In the current use of Smart Collections, one cannot set a search criteria for "Anna Haugen" and get ONLY the images that Anna Haugen is key-worded into. If one person in a photo has "Haugen" as part or all of a key-word, and another person has "Anna" as all or part of a keyword, THAT image will also be included, and there's no current way to block it. Period.
Unless, of course, you go through the collection every so often, find any new Anna or Haugen appearing, and figure out a way to use an exclamation point excluder to knock out ONLY that person and have no effect on Anna's photos.
Adobe, this is ABSURD! Nearly every other search system in the world allows quoting a word or series of words to require the return of ONLY results matching that specific sequence of letters. FREEBIE software can do this, why can't yours?
And further, you do NOT allow setting a criteria for a specific multiple-word keyword either ... thought you can stupid-search for it on the right-hand panel.
There's other weaknesses in your filtering, which by nature is quite arcane and shrouded in mystery. I don't have time for dealing with it, would you please fix the simple little problems?
Thank you ... um ... hello? Hello? ... dang, where's the "on" switch for this mike I wonder ...
Neil

rsilber wrote: Dear SSR, Thanks for the reply, but it poses some questions. ()How does one obtain the older Creative PlayCenter? (2)Does it mean uninstalling the current PlayCenter and then regenerating all the (my) 7000 entries? Does the printing feature on the older PlayCenter give any control over the font size and page arrangement?
I'm not sure if PlayCenter clashes with MediaSource, so you might have to uninstall it.
You have to install PC2 first, then the update 3.02.52. PlayCentre 3.02.52 (links are to Nomadness.net's download section)
The printed output was very basic with zero control if memory serves correct.
As for the WinAmp plugin, would I have to duplicate an MP3 library in WinAmp to get the HTML output?
No. It loads the library from your player. Plus you can control the display format of the queue, so have some control over the output.

Similar Messages

How do I set a form field to accept whole numbers only?

I am using Acrobat X.
I have a number of fields in a form that are used in a variety of calculations. It is the nature of these fields that they need to contain whole numbers only, no decimals.
On the "Format" tab, I have set the field format to "Number" and the number of decimal places to "0"
On the "Validate" Tab I have set the "Field Value is in Range" "From 0", "To 999"
This is to ensure that the field can only contain a maximum of a three digit number.
But this still allows the user to enter decimal places. This messes up my calculations so I want to limit the user's input to whole numbers.
How do I do that?
Thanks!
Steve

I apologize for being dense but I really do not know how to apply your solution. Taking the path you suggested there is nothing under Tools>Document Processing relating to Java scripts.
I presume that I have to save this part somewhere in Acrobat:
// Document-level function
function triDigKS() {
　　　 // Get all that is currently in the field
　　　 var val = AFMergeChange(event);
　　　 // Reject entry if anythig but digits
　　　 event.rc = AFExactMatch(/\d{0,3}/, val);
And then use the call out:
// Custom Keystroke script
triDigKS();
Somewhere else but I don't know where thos two places are. Do I use the callout in the validation tab, or somewhere else?
Thanks
Steve

I opened my computer and the whole top only shows web search, I can not find my bookmarks and I tried reloading firefox and still nothing but tab bar

Question
I opened my computer and the whole top only shows web search, I can not find my bookmarks and I tried reloading firefox and still nothing but tab bar. Tried f10, alt, nothing! Can I reload an old firefox? There is no firefox logo at top. When I rt click at top I see hide toolbar and leave full screen. To the right there is only a home sign. How can I get my BOOKMARKS ??????? I so need them and hate what ever this is that now shows up on firefox.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Why only BADI and not normal Z-Classes?

Usually an SAP program calls a BADI using a code
similar to:
CLASS CL_EXITHANDLER DEFINITION LOAD.
DATA MYEXIT TYPE REF TO IF_EX_BADINAME.
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
CHANGING INSTANCE = MYEXIT.
fetching instance of the BADI class
MYEXIT->BADIMETHOD calling the BADI method
EXPORTING.
IMPORTING.
It is recommended that the BADI we create also be called
the same way.. It would work juz fine if i create a
normal interface and class and call them from my
program.. If the BADI's are implemented by use of normal
Classes and Interfaces why should we go for BADI's and
why the special name 'BADI'?
Or is there any special functioning of a BADI? Does any
one know how BADI's exactly work and how they are
different from normal interfaces and classes? If anyone
has a link to some BADI reference material pls do provide
the link..
Thank you..

Dusan,
The whole idea of BADI is to add value to the standard processing. I went through the weblog you have mentioned.
What the author of the weblog is doing is to create a new BADR, no doubt about it. However, if you have observer it closely he is calling it from a user exit (Function module). That means, whether its a standard BADI or a custom BADI, we are still dependent on the standard code to provide a user exit. Now assume a case, where you don't have a user exit, what are you going to do by creating a custom BADI, you cannot call that anyways.
So, my point of view is, for this thread's question - BADI vs Z-Classes - These are two different things. You can implement a standard / custom BADI only when there a provision made by the SAP Developers. Where as Custom classes are specific to my functionality and I can use it as it is applicable.
Now, coming to weblog's point of creating a custom BADI - If I have to create a custom BADI, I can as well create a custom class and a custom interface and implement that in the user exit (Function) provided. Technically I don't have to create a BADI. And the custom class will still serve the same purpose. As I have an interface, every programmer using this interface can have their own implementation, so it doesn't mandate me to create my own BADI.
Your thought's please?
regards,
Ravi

My iphone5 was stolen.. pls help how to deactivate it? badly need your help..

My iphone5 was stolen.. i was slept on the bus, pls help how to deactivate it? badly need your help.. its only two months on me

What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Animation problem ( badly needs) ?

Hello,
Sorry i 'm posting again and again. because nobody couldn't respond . I badly need this application to be run. Here is what am doing. First applet should start and display '+'( by painting) after keypressed(eg spacebar) then sleep for a while and paint rectangles and next arrow then sleep and etc . this goes on until i keypressed again. Here is that i wrote code , could u please check and modify it. Where i stucked is that KeyPressed code is not working. Please see the code modify it wherever is necessary.
Thanks in advance,
- Balaji
import java.awt.*;
import java.awt.event.*;
import java.applet.Applet;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Color;
import java.awt.Rectangle;
import java.awt.GradientPaint;
import java.awt.geom.GeneralPath;
import java.awt.Polygon;
//<applet code="ExptA4.class" width=300 height=300></applet>
public class ExptA4 extends Applet implements Runnable {
     Thread animator;
     Dimension appSize;
     boolean frozen = false;
     int appWidth = 1000, appHeight = 800;
     int delay = 500;
     java.awt.geom.Ellipse2D.Double circle;
     public void init(){
          appSize = new Dimension(appWidth,appHeight);
          this.setSize(appSize);
         addKeyListener(new KeyAdapter(){
              public void keyPressed(KeyEvent e){
              ExptA4 exptA4 = (ExptA4) e.getSource();
              if (e.getKeyCode() == KeyEvent.VK_SPACE)
                   System.out.println("in the keypressed method ");
              }// end of if
              } // end of keyPressed method
     } // end of init
     public void start(){
          if(frozen)
           { // do nothing
          else
             if(animator == null) {
                       animator = new Thread(this);
            animator.start();
           } // end of else
           requestFocus();
     } // end of start
     public void stop(){
          // stop the animation thread
          animator = null ;
     } // end of stop
     public void run(){
          Thread.currentThread().setPriority(Thread.MIN_PRIORITY);
          while(Thread.currentThread() == animator)
                  repaint();
                  try {
                 Thread.sleep(5400);
                   } catch (InterruptedException e) {
                         break;
     } // end of run
     public void paint(Graphics g){
          Graphics2D g2 = (Graphics2D)g;
        Rectangle leftRect,rightRect,plus_horz,plus_vert;
        Polygon downArrow = new Polygon();
       // drawing the plus
       int xHPoint = 440,yHPoint = 350, widthP = 30, heightP = 30;
       plus_horz = new Rectangle(xHPoint,yHPoint,widthP,heightP-27);
       plus_vert = new Rectangle(xHPoint+10,yHPoint-10,widthP-17,heightP-10);
       // black interior
        g2.setColor(Color.black);
        g2.fill(plus_horz);
        // black border
        g2.setColor(Color.black);
        g2.draw(plus_horz);
       // black interior
        g2.setColor(Color.black);
        g2.fill(plus_vert);
        // black border
        g2.setColor(Color.black);
        g2.draw(plus_vert);
           try{
                 Thread.sleep(4000);
             } catch (InterruptedException ie)
       // drawing the Rectangle
            leftRect = new Rectangle(300,300,100,100);
         rightRect = new Rectangle(500,300,100,100);
         // white interior
        g2.setColor(Color.white);
        g2.fill(leftRect);
        // black border
        g2.setColor(Color.black);
        g2.draw(leftRect);
        // white interior
        g2.setColor(Color.white);
        g2.fill(rightRect);
        // black border
        g2.setColor(Color.black);
        g2.draw(rightRect);
       try{
                 Thread.sleep(4000);
             } catch (InterruptedException ie)
       // drawing downArrow
        int xPointA = 340,yPointA = 340, widthA = 30, heightA = 30;
         downArrow.addPoint(xPointA,yPointA);
        downArrow.addPoint(xPointA+25,yPointA-25);
        downArrow.addPoint(xPointA+13,yPointA-25);
        downArrow.addPoint(xPointA+13,yPointA-75);
        downArrow.addPoint(xPointA-13,yPointA-75);
        downArrow.addPoint(xPointA-13,yPointA-25);
        downArrow.addPoint(xPointA-25,yPointA-25);
        g2.setColor(Color.white);
        g2.fill(downArrow);
        // black border
        g2.setColor(Color.black);
        g2.draw(downArrow);
       try{
                 Thread.sleep(4000);
             } catch (InterruptedException ie)
   // drawing circle
       int xPoint = 340,yPoint = 340, width = 30, height = 30;
       circle = new java.awt.geom.Ellipse2D.Double(xPoint,yPoint,width,height);
        // black interior
        g2.setColor(Color.black);
        g2.fill(circle);
        // black border
        g2.setColor(Color.black);
        g2.draw(circle);
       try{
                 Thread.sleep(4000);
             } catch (InterruptedException ie)
     } // end of paint method
}

hi ,
here is modified code . I kept all sleep methods in the run method.
But the problem is i couldn't get any response from the keyboard.
What i need is that whenever key presses then animation should starts.
please help me in this regard.i 'm putting my code here, please modify
it according to my requirements. Once again i badly need this one to be run. i really appreciate if anyone help in this one.
Thanks,
-balaji
import java.awt.*;
import java.awt.event.*;
import java.applet.Applet;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Color;
import java.awt.Rectangle;
import java.awt.GradientPaint;
import java.awt.geom.GeneralPath;
import java.awt.Polygon;
//<applet code="ExptA5.class" width=300 height=300></applet>
public class ExptA5 extends Applet implements Runnable,KeyListener {
     Thread animator;
     Dimension appSize;
     boolean frozen = false;
     int appWidth = 1000, appHeight = 800;
     int delay = 500;
// drawing circle and arrow.
     DrawCircle circle = new DrawCircle();
    DrawArrow downArrow = new DrawArrow();
     public void init(){
        // setting dimension for applet
          appSize = new Dimension(appWidth,appHeight);
          this.setSize(appSize);
          // adding key listener
         addKeyListener(this);
     } // end of init
// to activate keys
     public void keyPressed(KeyEvent e ){
          System.out.println("in the keypressed method ");
          ExptA5 exptA5 = (ExptA5) e.getSource();
    // when space bar presses then start the thread and animation starts
          if( e.getKeyCode() == KeyEvent.VK_SPACE)
           if ( Thread.currentThread() == animator)
                 exptA5.animator.start();
          } // end of if
     } // end of keyPressed
// other key methods
     public void keyTyped(KeyEvent e){}
     public void keyReleased(KeyEvent e){}
     // applet starts and animation starts .
     public void start(){
          if(frozen)
           { // do nothing
          else
             if(animator == null) {
                       animator = new Thread(this);
            animator.start();
           } // end of else
     } // end of start
     public void stop(){
          // stop the animation thread
          animator = null ;
     } // end of stop
     public void run(){
          Thread.currentThread().setPriority(Thread.MIN_PRIORITY);
          while(Thread.currentThread() == animator)
          try {
             Graphics g = getGraphics();
               Graphics2D g2 = (Graphics2D)g;
              // drawing arrow which is calling from other class
             downArrow.drawPoly(g2);
             // sleeps for a while
             Thread.sleep(5400);
                // drawing circle which is calling from other class
                circle.drawCircle(g2);
                // sleeps for a while
             Thread.sleep(5400);
             repaint();
                   } catch (InterruptedException e) {
                         break;
     } // end of run
     public void paint(Graphics g){
     } // end of paint method
// drawing circle
public class DrawCircle{
   java.awt.geom.Ellipse2D.Double circle;
   public void drawCircle(Graphics2D g2)
          int xPoint = 340,yPoint = 340, width = 30, height = 30;
      circle = new java.awt.geom.Ellipse2D.Double(xPoint,yPoint,width,height);
      // black interior
      g2.setColor(Color.black);
      g2.fill(circle);
        // black border
      g2.setColor(Color.black);
      g2.draw(circle);
// drawing Arrow
public class DrawArrow{
      Polygon downArrow = new Polygon();
   public void drawPoly(Graphics2D g2)
          // drawing downArrow
        int xPointA = 340,yPointA = 340, widthA = 30, heightA = 30;
         downArrow.addPoint(xPointA,yPointA);
        downArrow.addPoint(xPointA+25,yPointA-25);
        downArrow.addPoint(xPointA+13,yPointA-25);
        downArrow.addPoint(xPointA+13,yPointA-75);
        downArrow.addPoint(xPointA-13,yPointA-75);
        downArrow.addPoint(xPointA-13,yPointA-25);
        downArrow.addPoint(xPointA-25,yPointA-25);
        g2.setColor(Color.white);
        g2.fill(downArrow);
        // black border
        g2.setColor(Color.black);
        g2.draw(downArrow);
}

Is a usb to 3 rca cable the only thing needed to see your mac on your tv?

Very self-explainatory, is a usb to 3 rca cable the only thing needed to see your mac on your tv?

Click, hold, and drag the window from your computer to the TV's desktop.

Thoughts on TCP/IP "Load only when needed"

Hello:
I've finally gotten DSL and was wondering what others thoughts are about the "Load only when needed" option in TCP/IP? Under dialup, it is best to keep this checked, but with broadband, I have read that you can keep it unchecked.
Just curious what others do in this situation?
TIA!

Gordon,
You got it in one.
Used to work a treat for me - I could run an applescript to fire up Outlook Express, send all the mail ready to be sent, which would start up Remote Access, I'd key the password, the mails would be sent and thescript would close OE and close the Remote Access connection. Couldn't use the script to fire up remote access cos it doesn't know when / if the connection has been established successfully.
This would sometimes be done over my mobile whilst in transit, so every second I was connected was costing me.
I suppose you could have "Load only when needed" set with broadband, the broadband would still be on and connected, but your Mac would have like an extra firewall until it decided to connect to the internet (but once you're connected you stay connected).

I get an "Exeeded Limit" error from iTunes Match, but I only have 18000 sings in my library. What might cause that?

I get an "Exeeded Limit" error from iTunes Match, but I only have 18000 sings in my library. What might cause that?

Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

A fu the whole page without the need to drag higeach tune ?

To drag a full page if itunes to a playlist is it possible to highlight the whole page without the need to highlight and drag each tune by usinf Ctrl?

CTRL+A, or Edit > Select All.
Either one will highlight everything in the current view, after which you can drag them all at once.

Searching for parent keywords only, Aperture 3

Hello everyone,
I want to search for images that have top-level keywords only, but not the child keywords. For example, if I have a 'birds' keyword with child keywords in it...
Birds
-Bald Eagle
-Heron
--Green Heron
--Blue Heron
-Pheasant
...if I keyword search for 'Birds', it brings up everything else in that birds category.
Normally this would be fine, but sometimes I don't know the name of birds in my photos, so I just assign them the generic keyword 'birds'. Occasionally, I would like to be able to go back to my 'birds' keyword, and find only those images that haven't been tagged with a deeper-level keyword.
Is this possible to do? I can't seem to find a way to do it. I appreciate any help.
-Jeff

I'm pretty sure Apple has actually improved the handling of parent keywords and the keyword hierarchy since 3.0 came out. It used to not really work at all.
Now it works as described in this thread. (Search on the parent keyword, and Aperture will find all images tagged with any of the children keywords.) This is, imho, very useful, and requires (I think) only one small user restriction to give Aperture the behavior most seem to expect from a nested (i.e.: hierarchical) keyword structure.
The "user restriction" is to give a special marker to parent keywords (to identify them as containers of keywords, separate from keywords), and to use these container keywords only as containers (that is, do not apply them to images).
I prefix all top-level containers with "aa.". This is arbitrary, but it has some reasons to recommend it:
. it forces the containers to the top of the keyword hierarchy
. it stands out without making the name harder to read at a glance
. the period allows one to double-click either the prefix or the suffix to select it in isolation
. it allows straightforward modification for hierarchy depth (see below).
In practice (using the example in this thread), the keyword hierarchy might be (as a starting point):
aa.Animals {top-level category}
bb.Birds {second-level category}
cc.Hawks {third-level category}
HawkUnspecified {child in third-level category}
HawkRedShouldered {child in third-level category}
HawkSharpshinned {child in third-level category}
{Etc.}
This immediately (afaict) solves several related usage problems. All hawk images show up when images are filtered for "Animals" or "Birds". One can easily search for "all hawks" or a specific hawk. One can easily tag hawks to be specified later, and easily recall those images. All the "Hawk" tags are gathered together alphabetically (as well as hierarchically) -- makes creating filters much easier. The Keyword HUD is much more useful as a reporting tool. (There is an added complexity: the keyword "HawkUnspecified" must be manually removed after the hawk is specified (a good use of a complex Smart Album).)
Additionally, this system allows for (IME) much easier maintenance of the Keyword list (renaming and moving).
#1 Keyword hint: use "{Option}+click" in the Filter HUD Keyword Rule to limit the selection to the clicked Keyword. Any time you filter on Keyword and don't get the result you expect, this is the first thing to check.
For me, Keyword use in Aperture is still very much a work in progress. Suggestions and comments are welcome.

Only BADi is used in enhancement spot when customer createion?

Only BADi is used in enhancement spot when customer createion?

Only BADi is used in enhancement spot when customer createion?

Regular expression-- How to match whole word

I use java.util.regex in my case,
my problem is following:
here is a sentence: "oRs As ordoRs"
i use this pattern: (?!\w)oRs(?<!\w)
the first word oRs should match, but why the third word also match?
Maybe my problem also could be scribled as following:
How to match whole word?

here is a sentence: "oRs As ordoRs"
i use this pattern: (?!\w)oRs(?<!\w)
the first word oRs should match, but why the third
word also match?What's even more interesting, there should be no matches at all! Just because the pattern is inherently inconsistent:
the (?!\w) requires the next char to be a non-letter, but
at the same time this char is reqired to be a letter 'o'.
The same thing in the end: the last char should be 's' but not a letter. So the pattern must match nothing.
Maybe my problem also could be scribled as following:
How to match whole word?It's simple, use word boundaries - either directed ( "\<" and
"\>") or undirected ("\b").
The word pattern will look like "\b\w+\b" or "\<\w+\>"
Test it here
http://jregex.sourceforge.net/demoapp.html

BAdI needed for transfer order split with the maxi.of 5 item level

Hi,
BAdI needed for transfer order split with the maximum of 5 item level.
If a transfer order contains 12 item level, three separate transfer order should be created with item level 5,5 and 2.
This transfer order is for the material which bound to flow to production from warehouse.
Can anyone explain the step by step procedure to implement this BAdI?
It would be great if the procedure is for New BAdI.
Thanks.

http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3430https [original link is broken] [original link is broken] [original link is broken]:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt

CUPC - CTL does not match the configured TFTP servers -- need reset!

Hi,
i have trouble with CUPC 8. Presence 8.0.4. I tested all things, but i'm unable find solution.
Client say: Phone initialization has occured. CTL reset required.[1002]. In the core log from the CUPC is:
provider-runner] [ConfigService] [CUCMConfigSubService.updateCTL(633)] - CTL does not match the configured TFTP servers -- need reset!
but i don't know which CTL, and why CUPC use CTL for accessing tftp. I'm not using secure connection to the CCM.
Solution from release notes:
http://www.cisco.com/en/US/docs/voice_ip_comm/cupc/8_0/english/release/notes/cupc80.html#wp248810 is not working.
Has anybody some idea?
Risa

Some details for my trouble. Integration from CUPS and CCM from system troubleshooter is ok.
CCM has device type CUSF. But CUPC is not able connect to this softphone. CUPC client show error message from my first post. And in the core log from the CUPC are messages about softphone and downloading configuration file, but tftp connection failed. Log contain messages: Supplied TFTP address 192.168.10.3 is not in the CTL. // CTL does not match the configured TFTP servers -- need reset!
(same situation with hostname of CCM)
From release notes and description of this situation I tried erase old configuration from PC, but nothing change - same trouble.
Has anybody some idea, which CTL is used for authenticate tftp.
Thanks for response.
Richard

"Match Whole Keyword Only" BADLY needed!

Similar Messages

Maybe you are looking for