Matchcode for clock/time

Hi all
I am writing a custom program and I have a time field in a table. I would like to add the SAP matchcode for time that show a clock that let the user choose hours minutes and seconds ... but I cannot find the name of that input help
can anybody help me please?
regards
Gabriele

Hi,
PARAMETERS : p_time TYPE DEMOTIME.
If you want time symbol you should create a screen. create the label and double click on the label just assign the Icon name as ICON_TIME. the label should show as a watch icon.
Regards,
Dhina,,
Edited by: Dhina DMD on Jun 3, 2011 2:36 PM

Similar Messages

Default Time for Clock Timer

Every time I go to set the time on the timer on my iPhone, it's at 1:30. At one point, in the past, wasn't there something where it would stay at the previous setting?
Is there a way to make it stay at the previous setting when the alarm goes off?

If your iphone is jailbroken ...
Open
//private/var/mobile/Library/Preferences/com.apple.mobiletimer.plist
Then modify the TIMER_INTERVAL value to a number of seconds of your desire. (note that the app only deals with minutes, so you'll have to set it to a multiplication of 60 sec, e.g. 0, 60, 120 etc')
You can use whatever property list viewer to do that.

Time reporting screen - additional fields for clock in/clock

Hi all, I have an issue with time reporting that I would appreciate your help in resolving. We would like to add additional fields for clock in/clock out data from external clocks. I think I saw it somewhere but now I cannot find it in the CAC2 configuration. Can you help? Thanks in advance, Maya

see if following link can help:
Custom field added to CATS but not showing in Data Entry View'

Clock/Timer/Alarm for iPad

I just got my new iPad and am disappointed it doesn't have the iPod clock/timer/alarm. Does anyone know of a good app that will turn my iPad off after a certain length of time? Like if I fall asleep using something on my iPad?

DaddyOFTheMacDaddy wrote:
Check the app store. The one I use most is 'ambiance', but there are several clock (free) apps available that do specifically what you're asking.
Good luck
They don't run in the background.

How to calculate for diffrent time zones

I have a simple clock that shows the current time using the
get.Time command. My problem is this. I'm in the central time zone.
So to calculate Pacific time I subtract 2 hours from hours like so
"hours = mydate.getHours() - 2 ;" So if it is 2pm central it
should be 12pm in the pacific. Doing my method will show that it is
12am when it is not. How can I fix this? Thanks in advance. Below
is my code. I'm hoping that with a fix I can do the same for other
time zones.
Attach Code
mydate = new Date();
seconds = mydate.getSeconds();
minutes = mydate.getMinutes();
hours = mydate.getHours()-2;
day = mydate.getDay();
date = mydate.getDate();
month = mydate.getMonth();
year = mydate.getFullYear();
if (hours>12) {
hours = hours-12;
ampm = "PM";
} else {
ampm = "AM";
if (hours == 0) {
hours = 12;
if (minutes<10) {
minutes = "0"+minutes;
if (seconds<10) {
seconds = "0"+seconds;
if (day==0){
day = "Sunday"
} else if (day==1){
day = "Monday"
} else if (day==2){
day = "Tuesday"
} else if (day==3){
day = "Wednesday"
} else if (day==4){
day = "Thursday"
} else if (day==5){
day = "Friday"
} else if (day==6){
day = "Saturday"
if (month==0){
month = "January"
} else if (month==1){
month = "February"
} else if (month==2){
month = "March"
} else if (month==3){
month = "April"
} else if (month==4){
month = "May"
} else if (month==5){
month = "June"
} else if (month==6){
month = "July"
} else if (month==7){
month = "August"
} else if (month==8){
month = "September"
} else if (month==9){
month = "October"
} else if (month==10){
month = "November"
} else if (month==11){
month = "December"
time = ((hours) + ":" + (minutes) + ":" + (seconds) + " " +
(ampm));
datefinal = ((day) + " " + (date) + " " + (month) + " " +
(year));

Hi
When you use any of the Date functions in Flash its
referenced to the LOCAL SYSTEM Time/Date.
So when you have a visitor in London it shows their time
LOCAL SYSTEM (PC) time and in Sydney it shows their LOCAL SYSTEM
(PC) time etc, etc. No need to calculate anything.
Hope it helps

[SOLVED] Getting freezes after using dwm for some time and exiting it

Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
This is my /var/log/Xorg.0.log
[ 7.573]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.573] X Protocol Version 11, Revision 0
[ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
[ 7.574] Build Date: 01 July 2013 10:48:42AM
[ 7.574]
[ 7.574] Current version of pixman: 0.30.0
[ 7.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
[ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.575] (==) No Layout section. Using the first Screen section.
[ 7.575] (==) No screen section available. Using defaults.
[ 7.575] (**) |-->Screen "Default Screen Section" (0)
[ 7.575] (**) | |-->Monitor "<default monitor>"
[ 7.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.575] (==) Automatically adding devices
[ 7.575] (==) Automatically enabling devices
[ 7.575] (==) Automatically adding GPU devices
[ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.578] Entry deleted from font path.
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.578] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.578] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.578] (II) Loader magic: 0x7fdc20
[ 7.578] (II) Module ABI versions:
[ 7.578] X.Org ANSI C Emulation: 0.4
[ 7.578] X.Org Video Driver: 14.1
[ 7.578] X.Org XInput driver : 19.1
[ 7.578] X.Org Server Extension : 7.0
[ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.580] Initializing built-in extension Generic Event Extension
[ 7.580] Initializing built-in extension SHAPE
[ 7.580] Initializing built-in extension MIT-SHM
[ 7.580] Initializing built-in extension XInputExtension
[ 7.580] Initializing built-in extension XTEST
[ 7.580] Initializing built-in extension BIG-REQUESTS
[ 7.580] Initializing built-in extension SYNC
[ 7.580] Initializing built-in extension XKEYBOARD
[ 7.580] Initializing built-in extension XC-MISC
[ 7.580] Initializing built-in extension SECURITY
[ 7.580] Initializing built-in extension XINERAMA
[ 7.580] Initializing built-in extension XFIXES
[ 7.580] Initializing built-in extension RENDER
[ 7.581] Initializing built-in extension RANDR
[ 7.581] Initializing built-in extension COMPOSITE
[ 7.581] Initializing built-in extension DAMAGE
[ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.581] Initializing built-in extension DOUBLE-BUFFER
[ 7.581] Initializing built-in extension RECORD
[ 7.581] Initializing built-in extension DPMS
[ 7.581] Initializing built-in extension X-Resource
[ 7.581] Initializing built-in extension XVideo
[ 7.581] Initializing built-in extension XVideo-MotionCompensation
[ 7.582] Initializing built-in extension XFree86-VidModeExtension
[ 7.583] Initializing built-in extension XFree86-DGA
[ 7.583] Initializing built-in extension XFree86-DRI
[ 7.584] Initializing built-in extension DRI2
[ 7.584] (II) LoadModule: "glx"
[ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.586] (II) Module glx: vendor="X.Org Foundation"
[ 7.586] compiled for 1.14.2, module version = 1.0.0
[ 7.586] ABI class: X.Org Server Extension, version 7.0
[ 7.586] (==) AIGLX enabled
[ 7.587] Loading extension GLX
[ 7.587] (==) Matched intel as autoconfigured driver 0
[ 7.587] (==) Matched nouveau as autoconfigured driver 1
[ 7.587] (==) Matched nvidia as autoconfigured driver 2
[ 7.587] (==) Matched nv as autoconfigured driver 3
[ 7.587] (==) Matched intel as autoconfigured driver 4
[ 7.587] (==) Matched vesa as autoconfigured driver 5
[ 7.587] (==) Matched modesetting as autoconfigured driver 6
[ 7.587] (==) Matched fbdev as autoconfigured driver 7
[ 7.587] (==) Assigned the driver to the xf86ConfigLayout
[ 7.587] (II) LoadModule: "intel"
[ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.592] (II) Module intel: vendor="X.Org Foundation"
[ 7.592] compiled for 1.14.2, module version = 2.21.12
[ 7.592] Module class: X.Org Video Driver
[ 7.592] ABI class: X.Org Video Driver, version 14.1
[ 7.592] (II) LoadModule: "nouveau"
[ 7.592] (WW) Warning, couldn't open module nouveau
[ 7.592] (II) UnloadModule: "nouveau"
[ 7.592] (II) Unloading nouveau
[ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nvidia"
[ 7.592] (WW) Warning, couldn't open module nvidia
[ 7.592] (II) UnloadModule: "nvidia"
[ 7.592] (II) Unloading nvidia
[ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nv"
[ 7.592] (WW) Warning, couldn't open module nv
[ 7.592] (II) UnloadModule: "nv"
[ 7.592] (II) Unloading nv
[ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.592] (II) LoadModule: "vesa"
[ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.593] (II) Module vesa: vendor="X.Org Foundation"
[ 7.593] compiled for 1.14.0, module version = 2.3.2
[ 7.593] Module class: X.Org Video Driver
[ 7.593] ABI class: X.Org Video Driver, version 14.1
[ 7.593] (II) LoadModule: "modesetting"
[ 7.593] (WW) Warning, couldn't open module modesetting
[ 7.593] (II) UnloadModule: "modesetting"
[ 7.593] (II) Unloading modesetting
[ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.593] (II) LoadModule: "fbdev"
[ 7.593] (WW) Warning, couldn't open module fbdev
[ 7.593] (II) UnloadModule: "fbdev"
[ 7.593] (II) Unloading fbdev
[ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 7.594] (II) VESA: driver for VESA chipsets: vesa
[ 7.594] (++) using VT number 1
[ 7.594] (WW) Falling back to old probe method for vesa
[ 7.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.594] (==) intel(0): RGB weight 888
[ 7.594] (==) intel(0): Default visual is TrueColor
[ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.594] (**) intel(0): Relaxed fencing enabled
[ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.594] (**) intel(0): Triple buffering? enabled
[ 7.594] (**) intel(0): Framebuffer tiled
[ 7.594] (**) intel(0): Pixmaps tiled
[ 7.594] (**) intel(0): 3D buffers tiled
[ 7.594] (**) intel(0): SwapBuffers wait enabled
[ 7.594] (==) intel(0): video overlay key set to 0x101fe
[ 7.594] (II) intel(0): Output eDP1 has no monitor section
[ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 7.596] (II) intel(0): Output VGA1 has no monitor section
[ 7.596] (II) intel(0): EDID for output eDP1
[ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 7.596] (II) intel(0): Year: 2012 Week: 0
[ 7.596] (II) intel(0): EDID Version: 1.4
[ 7.596] (II) intel(0): Digital Display Input
[ 7.596] (II) intel(0): 6 bits per channel
[ 7.596] (II) intel(0): Digital interface is DisplayPort
[ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 7.596] (II) intel(0): Gamma: 2.20
[ 7.596] (II) intel(0): No DPMS capabilities specified
[ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.596] (II) intel(0): First detailed timing is preferred mode
[ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 7.596] (II) intel(0): Manufacturer's mask: 0
[ 7.596] (II) intel(0): Supported detailed timing:
[ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 7.596] (II) intel(0): LG Display
[ 7.596] (II) intel(0): LP156WF4-SPB1
[ 7.596] (II) intel(0): EDID (in hex):
[ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
[ 7.596] (II) intel(0): 1c505400000001010101010101010101
[ 7.596] (II) intel(0): 010101010101e83580a8703816402024
[ 7.596] (II) intel(0): 550059c2100000180000000000000000
[ 7.596] (II) intel(0): 00000000000000000000000000fe004c
[ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
[ 7.596] (II) intel(0): 004c503135365746342d535042310069
[ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7.597] (II) intel(0): Printing probed modes for output eDP1
[ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.598] (II) intel(0): EDID for output VGA1
[ 7.598] (II) intel(0): Output eDP1 connected
[ 7.598] (II) intel(0): Output VGA1 disconnected
[ 7.598] (II) intel(0): Using exact sizes for initial modes
[ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.598] (==) intel(0): DPI set to (96, 96)
[ 7.598] (II) Loading sub module "fb"
[ 7.598] (II) LoadModule: "fb"
[ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.599] (II) Module fb: vendor="X.Org Foundation"
[ 7.599] compiled for 1.14.2, module version = 1.0.0
[ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.599] (II) Loading sub module "dri2"
[ 7.599] (II) LoadModule: "dri2"
[ 7.599] (II) Module "dri2" already built-in
[ 7.599] (II) UnloadModule: "vesa"
[ 7.599] (II) Unloading vesa
[ 7.599] (==) Depth 24 pixmap format is 32 bpp
[ 7.599] (II) intel(0): [DRI2] Setup complete
[ 7.599] (II) intel(0): [DRI2] DRI driver: i965
[ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 7.599] (II) UXA(0): Driver registered support for the following operations:
[ 7.599] (II) solid
[ 7.599] (II) copy
[ 7.599] (II) composite (RENDER acceleration)
[ 7.599] (II) put_image
[ 7.599] (II) get_image
[ 7.599] (==) intel(0): Backing store disabled
[ 7.599] (==) intel(0): Silken mouse enabled
[ 7.600] (II) intel(0): Initializing HW Cursor
[ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.600] (==) intel(0): DPMS enabled
[ 7.600] (==) intel(0): Intel XvMC decoder enabled
[ 7.600] (II) intel(0): Set up textured video
[ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
[ 7.600] (==) intel(0): hotplug detection: "enabled"
[ 7.613] (--) RandR disabled
[ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.634] (II) AIGLX: Loaded and initialized i965
[ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.669] (II) LoadModule: "evdev"
[ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.670] (II) Module evdev: vendor="X.Org Foundation"
[ 7.670] compiled for 1.14.2, module version = 2.8.1
[ 7.670] Module class: X.Org XInput Driver
[ 7.670] ABI class: X.Org XInput driver, version 19.1
[ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.670] (**) Video Bus: always reports core events
[ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.670] (--) evdev: Video Bus: Found keys
[ 7.670] (II) evdev: Video Bus: Configuring as keyboard
[ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7.670] (**) Option "xkb_rules" "evdev"
[ 7.670] (**) Option "xkb_model" "pc104"
[ 7.670] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.684] (**) Video Bus: always reports core events
[ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.684] (--) evdev: Video Bus: Found keys
[ 7.684] (II) evdev: Video Bus: Configuring as keyboard
[ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
[ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.684] (**) Option "xkb_rules" "evdev"
[ 7.684] (**) Option "xkb_model" "pc104"
[ 7.684] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Power Button'
[ 7.685] (**) Power Button: always reports core events
[ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.685] (--) evdev: Power Button: Found keys
[ 7.685] (II) evdev: Power Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 7.685] (II) No input driver specified, ignoring this device.
[ 7.685] (II) This device may have been added with another device file.
[ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.685] (**) Sleep Button: always reports core events
[ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.685] (--) evdev: Sleep Button: Found keys
[ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
[ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
[ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.686] (II) No input driver specified, ignoring this device.
[ 7.686] (II) This device may have been added with another device file.
[ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7.687] (II) LoadModule: "synaptics"
[ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.687] compiled for 1.14.1, module version = 1.7.1
[ 7.687] Module class: X.Org XInput Driver
[ 7.687] ABI class: X.Org XInput driver, version 19.1
[ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.687] (**) Option "Device" "/dev/input/event7"
[ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7.810] (**) Option "TapButton1" "1"
[ 7.810] (**) Option "TapButton2" "2"
[ 7.810] (**) Option "TapButton3" "3"
[ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
[ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 7.853] (II) No input driver specified, ignoring this device.
[ 7.853] (II) This device may have been added with another device file.
Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
In case it's of any use, this is my # uname -a
Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
Any ideas or advice to point me in the right direction would be very much appreciated.
Thanks in advance.
Last edited by contiver (2013-08-16 20:25:34)

I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
but it didn't work for me.
Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
BUG: unable to handle kernel paging request at ffffc90014ce8000
IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
Call Trace:
[<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
[<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
[<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
[<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
[<ffffffff813200bd>] redraw_screen+0x17d/0x240
[<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
[<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
[<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
[<ffffffff8130b407>] tty_ioctl+0x277/0xb90
[<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
[<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
[<ffffffff8117328e>] ? ____fput+0xe/0x10
[<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
[<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
[<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP <ffff8800797efaa8>
CR2: ffffc90014ce8000
---[ end trace aff6cb5ad5097aef ]---

Eth0 is being up and down for several time during boot

My wicd doesn't connect to eth0 on the first attempt after boot up. It is configured to eth0 always have a higher priority to connect.
My dmesg shows that eth0 being up and down for several time during boot. I have e1000e in my MODULES list.
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK=""
TIMEZONE="Asia/Hong_Kong"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MOD_AUTOLOAD="yes"
MODULES=(acpi-cpufreq fuse tp_smapi vboxdrv e1000e)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="antony-tp"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="yes"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(!hwclock syslog-ng dbus !network !dhcpcd rpcbind acpid @wicd nfs-common netfs @crond cups @laptop-mode @alsa @sensors ntpd @slim bluetooth)
Here is a segment of my dmesg
[ 2.759302] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.759304] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.759338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.759348] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.759467] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 2.766107] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.766808] ACPI: AC Adapter [AC] (on-line)
[ 2.776492] wmi: Mapper loaded
[ 2.777212] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.777781] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.777783] ACPI: Thermal Zone [THM0] (66 C)
[ 2.778291] iTCO_vendor_support: vendor-support=0
[ 2.780137] ACPI: Battery Slot [BAT0] (battery present)
[ 2.780958] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.781462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.781547] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.781919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.783139] cfg80211: Calling CRDA to update world regulatory domain
[ 2.789182] [drm] Initialized drm 1.1.0 20060810
[ 2.789538] hub 4-1:1.0: USB hub found
[ 2.789616] hub 4-1:1.0: 8 ports detected
[ 2.792925] Non-volatile memory driver v1.3
[ 2.795877] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.795879] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.795881] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown
[ 2.795882] thinkpad_acpi: Lenovo ThinkPad X220, model 4290NL5
[ 2.797236] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.797352] thinkpad_acpi: radio switch found; radios are enabled
[ 2.797466] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 2.799752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.800067] Registered led device: tpacpi::thinklight
[ 2.800091] Registered led device: tpacpi::power
[ 2.800106] Registered led device: tpacpi::standby
[ 2.800120] Registered led device: tpacpi::thinkvantage
[ 2.800192] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.800254] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.801077] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.801162] sdhci: Secure Digital Host Controller Interface driver
[ 2.801164] sdhci: Copyright(c) Pierre Ossman
[ 2.801707] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.801709] Copyright(c) 2003-2011 Intel Corporation
[ 2.801744] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.801753] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 2.801789] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 2.801791] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005abc000
[ 2.801793] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 2.801877] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[ 2.801913] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.801962] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 2.802045] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 2.802067] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.802107] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 2.802118] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
[ 2.802188] Registered led device: mmc0::
[ 2.803329] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 2.815226] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 2.815229] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 2.815231] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 2.815247] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 2.845674] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 2.845820] Registered led device: phy0-led
[ 2.850630] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.862431] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.943648] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:26
[ 2.943651] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.943712] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.943734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.943739] mei 0000:00:16.0: setting latency timer to 64
[ 2.943817] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 2.944502] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.945021] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.946341] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
[ 2.946452] watchdog: error registering /dev/watchdog (err=-16).
[ 2.946523] mei: unable to register watchdog device.
[ 2.946598] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.946692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.946734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.948359] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.948422] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 2.948444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.022245] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
[ 3.172080] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[ 3.274597] Bluetooth: Core ver 2.16
[ 3.274611] NET: Registered protocol family 31
[ 3.274612] Bluetooth: HCI device and connection manager initialized
[ 3.274614] Bluetooth: HCI socket layer initialized
[ 3.274614] Bluetooth: L2CAP socket layer initialized
[ 3.274618] Bluetooth: SCO socket layer initialized
[ 3.275535] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.276006] usbcore: registered new interface driver btusb
[ 3.338454] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
[ 3.444567] Linux media interface: v0.10
[ 3.447387] Linux video capture interface: v2.00
[ 3.448573] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[ 3.448671] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.2/input0
[ 3.448690] usbcore: registered new interface driver usbhid
[ 3.448691] usbhid: USB HID core driver
[ 3.449136] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 3.450945] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[ 3.450987] usbcore: registered new interface driver uvcvideo
[ 3.450988] USB Video Class driver (1.1.1)
[ 3.484049] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 3.491137] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.491298] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 3.491486] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 3.491637] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.491709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.491765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.492050] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492053] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492059] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.492062] i915 0000:00:02.0: setting latency timer to 64
[ 3.538056] mtrr: no more MTRRs available
[ 3.538058] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.538266] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 3.538270] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.538271] [drm] Driver supports precise vblank timestamp query.
[ 3.538292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.664501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
[ 3.664518] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.716317] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 4.407165] fbcon: inteldrmfb (fb0) is primary device
[ 4.575259] Console: switching to colour frame buffer device 170x48
[ 4.577042] fb0: inteldrmfb frame buffer device
[ 4.577043] drm: registered panic notifier
[ 4.607860] acpi device:01: registered as cooling_device4
[ 4.607985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 4.608039] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.608122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.757243] EXT4-fs (sda3): re-mounted. Opts: discard
[ 4.765917] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
[ 4.776777] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k SS
[ 5.099467] NET: Registered protocol family 10
[ 6.048650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.098038] Bluetooth: RFCOMM TTY layer initialized
[ 6.098055] Bluetooth: RFCOMM socket layer initialized
[ 6.098057] Bluetooth: RFCOMM ver 1.11
[ 6.278766] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.278893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.568639] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.568775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.684082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.176563] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.226662] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.227110] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.229345] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.490618] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 10.817814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.819315] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.186166] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 11.186292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 11.313367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.665342] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.717591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.718042] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.964795] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.811264] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
[ 13.826031] EXT4-fs (sda4): re-mounted. Opts: discard,commit=0
[ 15.178905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.180472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.663056] eth0: no IPv6 routers present
Any hint for tracing the root of this problem? Thank you very much!

Hi ...
If you have moved the Safari application from the Applications folder, move it back.
As far as the cache goes, there's a work around for that when you can't empty the Safari cache from the menu bar.
Go to ~/Library/Caches/com.aple.Safari.Cache.db. Move the Cache.db file to the Trash.
Try Safari.
Mac OS X (10.7.2) < from your profile
If that is corrrect, you need to update your system software. Click your Apple menu icon top left in your screen. From the drop down menu click Software
Update ...
~ (Tilde) character represents the Home folder.
For Lion v10.7x: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

Flash Flip Clock Timer

Hi all,
I am looking to develop a flip clock timer to place on a
company website to show when some software will be made available
(basically a release count down timer). I have seen a similar style
of what I am looking to do
here.
Although the one I want to create should count down not display the
time.
The reason for my post is I have no idea where to start and
was hoping someone could point me in the right direction to a
tutorial or provide a small sample fla.
Kind regards
David.

that's going to require some advanced scripting and i don't
know of any tutorials. i made something similar with numbers
flipping like an old-time scoreboard.
you'll need to tween the _yscale and _y property of the
number lower halves to give the appearance of flipping
numbers.

How do i make a clock/timer that can be reset to zero?

I need to make this clock/timer to run my control off of. To be more detailed I need to ouput a steadily increasing voltage slowly over a period of time. I have my DAQ assist set up to output a voltage to my device but i can't figure out how to make the timer/clock correctly.

It seems you simply want to update the ramp at a constant dt, why would you need to reset anything?
There are two main ways to do this:
software timed: use a loop with a given delay and write single points to the output.
hardware timed: setup timing for your task and send the entire ramp to the hardware. It will do the rest. No extra code needed.
LabVIEW Champion . Do more with less code and in less time .

Application for multiple times zones?

I have a world edition and travel quite a bit. Anyone know of any application out there that allows one to schedule events in more than one time zone? What would be best is a program that allows me to enter something in my calendar that then allows me to select which time zone that event will occur in. Barring that perhaps there is a clock program that allows me to at least see three or more times simultaneously.

There is no software that I no of (RIM should take notice as it's a problem with the device itself).
I have faced the same problem and I can give you half a solution. What I do is enter the apointment based on the + or minus of the GMT schedule for the time zone I'm going to be in. Of course it will be incorrect in your present time zone. However, when you change the BB clock for the new time zone all your appointments will show up at the correct time.
Good Luck,
jmcohen

ESS Timesheet error with Clock Times

Hi everyone,
Has anyone seen this issue? (ERP 6.0, EP 7):
Timesheet data entry profile is configured 'With Clock Times' and WITHOUT 'Release on Saving'. On the daily view of the timesheet, when clock times are entered and Refresh or Review is depressed, the number of hours is populated and the following error displays:
"Number of hours not valid when Start Time and End Time are entered"
This only displays:
- when the profile is configured without 'Release on Saving' checked. When it IS checked, the error goes away.
- from the daily view (no clock times on the Weekly View)
- in the portal timesheet, not via CAT2 in ECC
Any suggestions?
Thanks!
Message was edited by:
Frederic Wood

<u>Without checking 'Release on saving':</u> The system checks the number of hours value with the corresponding hours mentioned in IT0007.
<u>On checking 'Release on saving':</u> It overwrites the number of hours stored in IT0007 in the back end system.
This happens because this option has dependency with 'With Clock times' option. For this option, the system automatically deducts unpaid breaks, as determined in the employees's work schedule, when calculating the number of hours.
If this helps, pl do reward.
Thanks
Narasimha

About +ive Time Mgmt with Clock Time .

Hi SAP-HR Experts .
Plz give me idea about +ive Time Mgmt with Clock Time.
I maintained , Infotype 50 , (created from 01.04.2007)
When i tried to maintained Infotype 2011 . (from 01.04.2007) record is not created , it gives
warning (date is with in selection period) when i press Enter Key over it , No record is created in infotype 2011 .
I sat feature TMSTA = 1 .
In infotype 7 , i maintained Time Mgmt status = 1 .
I want to know what Time Evaluation Report (RPTIME00) will give to me ?
How do i confirm my self that now SAP-HR is running on +ive Time Mgmt with Clock Time.?
Please guide me ...
Regards : Rajneesh (9873607039)
Edited by: Rajneesh Kumar on Nov 18, 2008 6:02 AM

Hi Rajneesh,
When you run time evaluation through PT60 schema TM00 you will get the following:
1. Clock in and Clock out entry
All recorded time data documenting the actual attendance times or the actual absence times of employees.
Actual time has the opposite meaning of planned working time.
Example:
According to the work schedule, an employee is supposed to work from 8:00 a.m. to 5:00 p.m. on December 3, 1999 (planned working time). The actual time data (actual times) from this day is shown below:
8:00 a.m. to 2:30 p.m. Attendance
2:00 p.m. to 5:00 p.m. Absence - doctor's appointment
2. SKELETON TIME
skeleton time is a time account in which payment-related times of an employee are managed.
Skeleton time is determined in time evaluation.
Example:
Skeleton time in the standard SAP System consists of:
u2022     Attendance, absence, and off-site work within a contractual period (start and end of working time)
u2022     Overtime hours that exceed approved overtime
u2022     Paid break times
3. FLEXTIME
Working time pattern in which employees can individually determine their own start and end times, as long as a certain number of hours is worked within a defined period of time each day.
*4. FILL TIME
A specific period of working time described in time evaluation that lies within the contractual start and end of working time (excluding breaks).
If an employee works a flextime schedule and is also expected to be at work at certain times (core times), then fill time indicates the difference between the start and end of working time (without breaks) and the core times
5. PRODUCTIVE TIME
The usable working time for a resource. The system determines the productive time using the working time data and utilization rate for the resource as follows:
Productive time = (End of working time - start of working time - break
duration) x Rate of utilization / 100%.
You estimate the downtime at the resource using the utilization rate.
And the results of the following will depend on your settings...
Time evaluation will update the quotas and it will form time balances
I hope this information is enough to understand...for more clarifications revert to me..
Regards,
KPJ

Problem on Oracle11g2 RAC -- PRVF-5424 : Clock time offset check failed

I have a lot of file core wrrote every 6 hour and the same time of alert"node".log file show error about PRVF-5424 : Clock time offset check failed.
Yesterday I use this:
[root@hostname2 ~]# service ntpd stop
[root@hostname2 ~]# ntpdate
[root@hostname2 ~]# service ntpd start
in order to resolve but today the problem re-begin?
2013-04-17 20:23:06.063
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of 69695.6 that is beyond permissible limit of 1000.0 from NTP Time Server "******"
PRVF-5413 : Node "" has a time offset of 69940.6 that is beyond permissible limit of 1000.0 from NTP Time Server "**
2013-04-18 02:23:08.973
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of -1826.9 that is beyond permissible limit of 1000.0 from NTP Time Server "1***
PRVF-5413 : Node "" has a time offset of -1364.2 that is beyond permissible limit of 1000.0 from NTP Time Server "1**
2013-04-18 08:23:16.093
CRS-10051:CVU found following errors with Clusterware setup : PRVF-5424 : Clock time offset check failed
PRVF-5413 : Node "" has a time offset of -2698.5 that is beyond permissible limit of 1000.0 from NTP Time Server "1***
PRVF-5413 : Node "" has a time offset of -1998.7 that is beyond permissible limit of 1000.0 from NTP Time Server "1***

What is your OS name and version ?
In general you can solve these issues by configuring NTP service running on your cluster nodes to be synchronized with other NTP servers. For example on Linux please read "Oracle RAC and NTP" in http://www.oracle-base.com/articles/linux/linux-ntp-configuration.php#oracle-rac-and-ntp.
Edited by: P. Forstmann on 18 avr. 2013 13:35

"Waiting for real-time target (RT PXI target) to respond" error when the program waits interrupts

Hi there,
I have developed an application to detect interrupts generated by a electronic card and act in consequence. The program has been developed in labview but it calls a dll; that was created with labwindows. The dll is programmed to open the visa communication, enable events and install the interrupt handler and when an interrupt is detected, it reads the value of the different registers of the card and returns it to labview to visualize them.
The problem is that when the program waits for an interrupt, a prompt appears with the message "Waiting for real-time target (RT PXI target) to respond" and the only option I have is to click on the button to disconnect from the pxi or just wait. If I wait and I generate an interrupt, the prompt disappears and the application visualize the data like it was expected.
To wait for the interrupt the following code has been programmed in the function:
while (flag == 0)
Sleep (1000);
When an interrupt occurs, the value of flag changes to 1 and the function continue without any problem. I am not really sure, but probably here is the problem and probably this is not the best way to wait for an interrupt because the sleep function suspends the thread for the configured time, but at least the computing load in the PXI is between 0% and 1%. I was wondering if somebody knows how to wait for an interrupt without "lost" the communication with the PXI and if there is a better way to do it.
Any answer will be welcome and thanks for them,
Jaime
Solved!
Go to Solution.

Hello Naity,
First of all, in which thread runs the waiting process? Is it scheduled in another thread than the function setting the flag?
It scheduled in the same thread that I use to configure the communications and configure the card. Anyway, here is the pseudo code of the function interrupt that I programmed under labwindows,.
char* interrupt(void)
1. Open visa communications
2.Install handler interrupt --> status = viInstallHandler (instr, VI_EVENT_PXI_INTR, IntrHandler, VI_NULL); // the function IntrHandler will be called when an interrupt occurs
3. Enable event PXI interrupt
4. Wait
while (flag == 0)
Sleep (1000);
5. Visualize the data coming from the interrupt (registers and values measured with the card)
6. Uninstall handler interrupt
7. Close visa session
The interrupt handler function IntrHandler is called immediately when an interrupt occurs and the pseudo code is like this
ViStatus _VI_FUNCH IntrHandler(ViSession instr, ViEventType etype, ViEvent event, ViAddr userhandle)
1. Disable some functions of the card to avoid damages.
2. Read registers and put them in a buffer
3. Change the value of flag ---> flag = 1;
In labview, I call the function interrupt with a call library function node (see the capture attached) and the program reads and saves the data from returned from the function.
Secondly, I am not sure this method is the most elegant. You could for example register an event with the function and, insteand of setting a flag to 1, trigger the event and schedule it in another thread (if the function is thread safe). This could reduce your CPU Load even more and seem a bit cleaner to me.
I've never used events before in labwindows but I will try to do it in this way. But anyway, I suppose that I should; somehow, wait the event to occurs in labview while the waiting for the event is programmed inside the dll...and probably the same prompt that i am trying to avoid is going to appear again, because I am not returning the "control" to labview (I mean, labview executes the dll and waits for the event to occur. Then the execution of the labview program is stopped in the call library function node executing the dll)
Third point, which environment of development are you using?
I am working with LV 2010 sp1 and Labwindows cv 10.0.1 and with the real time module.
I did also another test, I divided the program in different functions, one to initialize the communication, another to wait until a interrupt has been detected and the other to obtain the data from the interrupt and close communications. With labview I call first with the call library function node the function to initialize, later I call inside a while loop the wait function like this
int waitAseconds (double seconds, short stop_waiting)
if(flag==1 || stop_waiting == 1)
flag = 1; //to detect the stop_waiting button
printf("flagAA =1 stop waiting = %d time = %d\n", stop_waiting, clock());
return flag;
else
SleepUS(seconds*1000000);
//a++;
printf("flag a= %d stop waiting = %d time = %d\n", flag, stop_waiting, clock());
return flag;
and when the program detects an interrupt, the function returns to labview the flag and stops the loop. Finally, it reads the values and close communications.
In this way, the prompt appears but after running the application for 10 or 20 minutes and also i checked that there is a time gap between the executions in the loop.
Thanks for your reply and your help,
Jaime
Attachments:
capture.png ‏40 KB

Report governor? (CPU time, clock time, # rows, etc?)

Is there any sort of report "governor" function available in the
Reports Server or 9iAS (Portal) interface to the reports server
that would let me stop a report once it had used up a certain
amount of database CPU time or simply ran for too long ("wall
clock time")?
For certain times of the night (during data loads, etc.), I need
to be able to restrict some or all of our users from taking over
the CPU by running too many reports concurrently, reports with
too broad a set of parameters, etc. The SRW.SET_MAXROW
procedure might help a bit, but ideally I'd like to be able to
control this without having to change each report. (Also, I'd
like to be able to control this on a user-by-user, group-by-
group or time-of-day basis.)
TIA for any suggestions anyone can offer!
- Bill

hello,
there is no feature in oracle reports but you might look into
the database features, they might have something like that.
regards,
the oracle reports team --pw

Matchcode for clock/time

Similar Messages

Maybe you are looking for