Matchcode problem with different GUI versions

We have upgraded most users to SAP GUI for Windows 640 Final Release. After this upgrade we have encountered an error in the matchcode lookups that the last character in most fields is being dropped so that when the lookup is performed it has an incomplete field for inquiry. Example:; in Sales Office we put in SO20, but when it uses this it drops the last character and performs the lookup with SO2 only.
However, SAP Frontend for Windows 620 Final release, the GUI prior to updating machines does not have the matchcode problem and works correctly.
I hope I have explained this adequately, any help is appreciated.

Hi,
I have this problem during the upgrade, I could not exactly figure it out what will be problem, but i upgrade my SAPGui frontend to 7.10 patch level 3, after that the problem found solved.
SAPGui 7.10 have backward compatiability, so it will work fine with 6.40 version
a®

Similar Messages

Problems with Itunes New Version?

Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0

There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Is Anyone Having Problems with the newer version of Firefox?

I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English

Sounds like this issue:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]]

Problem with the Arabic vowelization in V 4.0 although we didn't face this problem with the previous versions ,so please fix it up quickly

There is a problem with the arabic vowelization in the browser version 4.0 although we didn't face this problem with the previous versions ,so please fix it up quickly because it affects on our work

Do you have an Arabic version of Firefox installed which isn't displaying the vowelization correctly, or are you trying to read it using an English language version?
There are a few add-ons for Arabic which might possibly help here: [https://addons.mozilla.org/en-US/firefox/search/?q=arabic&cat=all&x=0&y=0 Arabic add-ons]

Problem with the active version of the transfer rule ABAP program with sour

Hi,
I have a problem with the active version of the transfer rule ABAP program with source system EXCEL.
The system does not react to changes done in the transfer rule coding. For FISCPER I have hardcoded the result 'BABABA' and still the results delivered are those from the CSV.
Resetting the system buffers does not help. The problem is systematic in combination with source system EXCEL (i.e. not only 1 InfoSource). Checking the active program Extras->Display Program shows the coding (result='BABABA') being there, but
as stated, the system does not produce the result BABABA, but instead the result of the CSV.
It seems as if the original version from the very first activation of the transfer rule program remains somewhere and continues to be used. Does anybody know how to flush it out and get the system to actually use the coding appearing as the active program.
I have posted an OSS note, but SAP takes it time to answer and I am under time pressure so I figured that maybe one of you know who to solve it before SAP does.
Greetings and thanks,
Martin

Hi martin,
just try to go out the RSA1 and then return to your infopac. ...
sometimes there some "cache" trouble

Setup Central Contract Management SRM 7.01 with differing release versions

Hello experts,
OSS note 1268821 explains how to configure the central contract management between a SRM 7.0 and an ERP 6.04. So far so good, but how should it be handled if there are differing release versions such as ERP 6.04 and ERP 6.03? I guess that a technical split (xml services/ ALE distribution) is necessary?
Assuming that there are some backends with differing release versions and in some cases with differing master data (not supported by central master data client) would you always go via PI? Independent of release version, technology and master data.
Could you give some further detailed informations how to configure such a scenario? What has to be done to transfer existing contracts from an ERP 6.04 into SRM CM component (migration concept)?
Thanks!!!
KR Thorsten

Hi Thorsten
The minimal ECC version is 6.0 EHP4, Central Contracts require certain business functions in ECC to be activated and as these are included within ECC EHP4 you won't have these available in lower version. Therefore you won't be able to operate central contracts in such an ECC system.
You would either have to go with patching these systems or go with GOA's for these systems.
Operating central contracts via PI or SOA i believe provide almost similar functionality. SOA however requires an SRM EHP1 system and ECC EHP5 back-end to operate whilst central contracts configured via PI can be operated onwards from an SRM 7.0 and EHP4 system.
I can't help you on your migration issue, maybe someone else can.
Kind regards,
Tim

Problem with Silverlight 5, version 4 worked great on my IMAC.

Problem with Silverlight 5, version 4 worked great on my IMAC. Since I updated all my movies shutter or they stop to refresh. No one from Netflix or Microsoft can solve this problem. Please advise if there is a fix, maybe drop the silverlight plugin and contract with Flash Player plugin it works with everything.
Please don't advise me to uninstall and re-install the silverlight plugin I wrote a paper on un-installinging this plugin.
Please advise, I know there is an army of frusrated Netfix members out there.

The solution is to download and install the latest version of Flip4Mac, which now includes a Silverlight component:
http://dynamic.telestream.net/downloads/download-flip4macwmv.htm
But the latest news is that Microsoft will probably abandon Silverlight in favour of HTML5:
http://www.appleinsider.com/articles/10/10/29/apples_ios_pushes_microsoft_to_dia l_down_silverlight_for_html5.html and
http://www.bbc.co.uk/news/technology-11673384
If you want to remove Silverlight the instructions are here:
http://support.microsoft.com/kb/970064

I've run into a problem with my trail version of Adobe Premier 13, and it appears to be a major one.

I’ve run into a problem with my trail version of Adobe Premier 13, and it appears to be a major one. Here’s what happened. Yesterday when I turned on the computer, I got a prompt asking if I wanted to link my Adobe Lightroom with Adobe Premier. I “x’d” the prompt but then the computer went into a “do not turn off” mode. 45 minutes later the computer was still prompting me not to turn it off. Thinking that the computer was hung up I did turn it off. Then I turned it back on, went to Adobe Lightroom to discover that all my work from the past three-to four years had disappeared.
At this point I am afraid to mess with Adobe Premier, so it’s still on my computer. I used Windows 7, Photoshop CS3 and Lightroom 4. Do you think if I uninstalled my trial version of Adobe Premier 13, my work on Lightroom would return? Or is it lost?
Thanks to any who offer suggestions.
Bert Gildart

Bert Gildart
I was unaware that you could establish any direct linkage between Lightroom and Premiere Elements. Are you sure that the association was to be for Photoshop CS3 and Lightroom?
Have you tried to do a System Restore to a point before you installed Premiere Elements 13 or before you OK'd whatever this Lightroom linkage was?
Have you asked your question in the Adobe Lightroom Forum, asking about recovery of work lost from Lightroom? Have you found any traces of your lost Lightroom work in the Recycle Bin?
ATR

Sqljdbc4 driver problem with the latest version of java (java6 update9)

Hi all, sorry for my ingles.Need help with a problem, I have to connect to sql server 2008 from Java, I had install the Java SE Development Kit 6u22, and when the upgrade to the 6u29, the driver stopped working, they let the following example:
public static Connection getConnection(String db_connect_string,String jdbcDriver)
Connection conn = null;
try {
Class.forName(jdbcDriver);
conn = DriverManager.getConnection(db_connect_string); //when you run this line, does nothing mores, nor throws errors
} catch (Exception e) {
System.out.println("Error de conexion." + e.getMessage());
return conn;
uninstall update29, and install that before and had returned to work. Still do not know how to solve this problem with the latest version of java. Any ideas?.
Thanks.

You are not the only one.
MS SQL JDBC does not work with 1.6.0_29?

After ugrading to Firefox 4, I can not go to my job e-mail website. I get the message: ssl_error_renegotiation_not_allowed. No problem with the old version of Firefox. Can I have the old version of Firefox back?

After ugrading to Firefox 4, I can't go to my job e-mail website. I get the message: ssl_error_renegotiation_not_allowed. No problem with the old version of Firefox. Can I have the old version of Firefox back?

See:
*https://wiki.mozilla.org/Security:Renegotiation

Is anyone having problems with the latest version of iTunes?

is anyone having problems with the latest version of ITunes?

Dwayne3333 wrote:
is anyone having problems with the latest version of ITunes?
What a vague and useless question.
A search of the forums would have revealed issues that others are having.
Why does it matter though? Are you having issues? If not.. why would you care?

How do I fix the problems with the newest version of firefox

I a having a major problem with the newest version of firefox and I am not happy with it. I did everything that I am supposed to do with the reset, but it is still not working correctly. It has a lot of no responses and freezing up problems.
How do I fix this problem?

You didn't provide any information about your Firefox setup. Can you do that and paste it in a new reply?
*Navigate to <code>about:support</code> via Address Bar
*Click the button that says <code>Copy text to clipboard</code>
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
Can you try to start Firefox in Safe Mode to see if Firefox opens and works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Hold the SHIFT/Option key while opening Firefox
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.

Purchased 2 iphone 5's. Both have cracked the screen in the first week. Never had this problem with the previous versions iphones being so fragile.

I purchased 2 iphone 5's. One for my husband and one for me. Both have cracked the screen in the first week. I even have a case on mine. Never had this problem with the previous versions iphones being so fragile. Has anyone else experienced this?

Tests by some of the web sites and magazines claim that the iPhone 5 is in fact more rugged than previous models. That doesn't obviate the possibility of an assembly defect that would make yours more susceptible to damage, but if you dropped or impacted them and they cracked, then your warranty will not apply and you'll have to pay for replacement, either the AppleCare+ "deductible", if you purchased AppleCare+ with your iPhone, or Apple's normal out-of-warranty replacement charge.
You can of course make an appointment at an Apple Store, explain the situation, and hope that there's something they can do for you. Don't count on it, though.
Regards.

Matchcode problem with different GUI versions

Similar Messages

Maybe you are looking for