Matchcode with texts in Bex and without texts in Web

Dear all,
I've got one query with variable selections and especially for InfoObject "Catalog".
When I launch the query with Bex, the variable selection window appears, then I select the matchcode for "Catalog" and the values (keys and texts) appear.
When I launch the Web template based on this same Bex query, only the keys are available for the matchcode "Catalog". I can't see why there is no text.
Can anybody tell me what's wrong?

Hi Ric,
I have the same issue
Could you tell me how did you solved?
Thanks a lot!

Similar Messages

I receive an error message whenever I text recently entered contacts. It says the number is invalid. I have tried entering the number with the area code and without the area code.

I receive an error message whenever I try to send text messages to new contacts. It says the number is invalid and to enter a 10 digit number. I have tried entering the phone number with the area code and without the area code. Any ideas?

Same problem here. I've deleted the contact and had them text me, but when I try to text them back I get the same invalid number message! So frustrating! Please help!

I installed Mountain Lion and now some times when I start my mac it look with a black screen and white text. I'm really worry about it, can somebody help me?

I installed Mountain Lion in my IMac and now, some times, when I start up my mac it looks with a black screen and white text. I'm really worry about it, can somebody help me?

Don't worry, this is probably just Verbose Mode. It's perfectly harmless. If you're not specifically invoking it, than it's probably down to an unwanted setting in NVRAM. See this article on resetting NVRAM if it continues to bother you.

Text element with line item content and include text

Hi All,
How to write in smartform in single text element with line item content and include text.I am using this text element in table . Pls help me out. i am writing the include command in text element ,but this command is not enough for single line of text editor.
thanks ,
Rakesh singh

I have been pulling my hair out for a few days trying to find
this solution. This fixed my problems as well.
I was getting ready to scrap the Report Builder altogether
and move to SQL Server Reporting Services over this issue.
I'm running 7.0.2 also, that version alone fixed many small
issues like creating borders and such.
Thanks

Popup screen with two check box and a text area for the user to enter value

hi,
i have a requirement when a button is clicked a popup screen should appear with two check box and a text box where the user can enter a value.
is there any function module which has that functionality

Hello,
You can create a new screen and select the screen type as model dialog box.This will give you a pop-up screen and you can call this model dialog box screen in the PAI of the screen where the button is present.(At user-command).
case ok_code.
when 'BUTTON'.
call screen 200 starting at 10 10.
You can design the PBO of this pop-up screen as per your needs.
Regards,
Beejal
**Reward if this helps.

HT4528 I get texts to myself and double texts from everyone else on my iphone?

When I text I get texts to myself and double texts from everyone else responding to my texts on my iphone? Any suggestions on how to stop this?

Is it text or imessage?

Difference jb/w text symblosin script and standard text in scripts

hi to all
can u pols explain about the
difference b/w text symblos in script and standard text in scripts

hi
Default paragraph Paragraph set to * in standard text maintenance
If no form has been assigned to a text, the system automatically assigns the form SYSTEM, which contains minimal definitions for text formatting. There are two ways of formatting texts using forms: Use the standard text maintenance to enter and print the text.
Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).

Text Symbols
Text symbols acquire their values as a result of explicit assignment. To interactively assign text symbols, in the text editor choose Include  Symbols  Text. This method is available for all text symbols belonging to a text module as well as those of the associated form. Values defined in this way are lost when the transaction is left. If you want to print the text module again, then you must enter the symbol values again. The purpose of the DEFINE command is to provide a means of making this value assignment a permanent part of the text, so that the values are available again when the text module is called again. This command can also be used to re-assign a new value to a text symbol half-way through the text. Syntax: /: DEFINE &symbol_name& = 'value'
/: DEFINE &subject& = 'Your letter of 7/3/95' The value assigned can have a maximal length of 60 characters. It may itself contain other symbols. A symbol contained within the value assigned to another symbol is not replaced with its own value at the point at which the DEFINE command is executed. Rather, this replacement is made when the symbol defined in the DEFINE command is called in the text.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& = 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPscript If, however, the DEFINE command is written using the ':=' character rather than the '=' character, then any symbol contained within the value being assigned is replaced immediately with its current value. The assignment to the target symbol is made only after all symbols in the value string are replaced with their values. The total length of the value string may not exceed 80 characters. The target symbol must be a text symbol, as before.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& := 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPmail
Inserting Text Symbols
Procedure
Inserting a Text Symbol
1. Choose Insert → Symbols → Text.
2. Place the cursor on the desired text symbol.
3. Choose Choose.
4. The system inserts the text symbol.
Editing the Value of a Text Symbol
1. Choose Insert → Symbols → Text.
2. Choose Edit value bearbeiten. The dialog window Value definition for symbol <text symbol> appears.
3. Enter the appropriate value definition.
4. Choose Continue. In the dialog window Text symbols the specified value appears after the name of the text symbol.
5. Choose Continue.
Deleting all Text Symbol Values
1. Choose Insert → Symbols → Text.
2. Choose Delete all values. The system deletes all defined values.
3. Choose Continue.
Using Formatting Options for Text Symbols
1. Choose Insert → Symbols → Text.
2. Choose Options. The dialog window Formatting options for <text symbol> appears.
3. Fill in the fields.
4. Choose Continue.
5. Choose Continue. The system executes the selected formatting option.
regards
ravish
plz reward points if helpful

Anyone able to run SOAP over SSL with Weblogic 5.1 and without purchasing third party tools??? If so, how???

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

Meaning of With Payment of Duty and Without Payment of duty

Dear All,
Can anybody please elaborate as to what is the difference between "With" and "Without" payment of duty. Also how the is the above helpful when i am using the tax codes of type CENVAT in any document.
Regards,
Rahul

Hi Rahul
without payment of duty is used for Export of Excisable Goods and sale of those goods which are exempt under certain excise notifications.
In export of excisable goods, we will not pay any duty to excise department but need to calculate to reflect in A.R.E. 1 report.
Regards
Kamlesh Vagal

Hi there. I having a problem with InDesign PDF interactive export. I would keep my text area style and not text area default style when I export the PDF. How could I do?

Could you help me?

Thanks for the answer Sumit Singh,
sorry but my problem keeps.
I create a simple text area and then trasform it in interactive text area, set it, apply my paragraph/character style and at the end export it in PDF (interactive).
I open the file with Adobe Acrobat, but when I customize it, words inside text area have stylized with default paragraph/character style.
How could I keep my style on export interactive text area?
Thanks a lot.

Rendering PDF with Windows.Data.Pdf and allowing text selection

Hi there,
I need to render a PDF and allow the user to select text on the PDF.
As I see, Windows.Data.Pdf does not support more than returning an image.
Even so, how can I achieve my goal? The Windows 8 app "Reader" has this capability but I don't understand how it works.
BTW: I have tested other renderers but they have rendering issues with some complex PDF content (complex: RTL).
Thanks,
Lidan

Hi Lidan,
Unfortunately, the built-in PDF feature has not provided select text on the PDF. You can send your request on UserVoice to ask public that API.
https://wpdev.uservoice.com/forums/110705-dev-platform.
Looking for a work around, you can use your favor search engine to look some third party library.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Add date to new text file name and generic text in body

Okay, I hope this is the right forum. To help manage and keep track of incoming assets/files and I created an Automator workflow with the following: "Get Selected Finder Items → Get Folder Contents → New Text File (w/Show this action when the workflow runs so I can give a unique name).
This creates a text file with the folder contents listed in the body.
I would like to know if I can do two things:
1. Automatically add a date/time stamp to the Save as field so it will automatically have a unique file name?
2. I also want to add text before the listed contents within the text file. (e.g.: Let's say the folder contents are Volumes/Mac HD/Generic_movie.mov. I want the final text to read:
"The following file has been moved to the local volume at: Volumes/Mac HD/Generic_movie.mov"
Is there a way to accomplish either one or both of these with Automator or AppleScripts?
Thanks.

I would like to know if I can do two things...
This might address your first concern:
*1) Get Selected Finder Items*
*2) Get Folder Contents*
*3) New Text File* -- select a destination folder and check *Show Action When Run*
*4) Rename Finder Items:*
Choose *Add Date or Time* from the popup
Date/Time: select Created, Modified, or Current - Format: *Month Day Year*
Where: *After name* - Separator: *Forward Slash*
Separator: Space - check *Use Leading Zeros* (optional)
*5) Rename Finder Items:*
Choose *Add Text* from the popup
Add: *" at"* -- put a leading space before "at" (without the quotes), and select *after name*.
*6) Rename Finder Items:*
Choose *Add Date or Time*
Date/Time: Current - Format: *Hour Minute Second*
Where: *After name* - Separator: Dash
Separator: Space - check *Use Leading Zeros* (strongly recommended)
+--- End of Workflow ---+
Save the workflow as an application and use it as a droplet. Drop a desired folder onto the saved applet and enter a name when the dialog appears. The new text file, which will be found in the destination folder, should be appended with a date and time stamp, e.g., *"My Folder List 7/8/2010 at 23-54-09"*
Tested using Mac OS 10.4.11 and Automator v. 1.0.5
Good luck; hope this helps.

Text arrays (variables) and Dynamic Text Box

Hello everyone. I have a text file (let's call it sample.txt)
that has numerous variables or arrays in this format:
&info=This is some information
&stuff=This is more stuff
&whatever=Even more stuff again....
Anyway, I need to load a particular variable via individual
buttons from this same sample.txt file into a dynamic text box
(let's call it dynText), and I am a bit lost as to how to do it.
Please provide me a solution thank you.
Glenn

Thank you very much, it's greatly appreciated. It worked
perfectly except that it does not like variables that begin with
numbers like:
&401_2b=401_2b
The above doesn't work, but if I do this...
&h401_2b=401_2b
Everything is fine. Problem being, I am generating the
variables via PHP and therefore cannot "change" them. Can you
provide me with a way that ActionScript can "see" the variable that
starts with a numeric value? Thanks for your time.
Glenn

How to open a PDF-File in a browser with 50% screen view and without any modification rights?

Hello everyone,
i have the following problem. I would like to open a PDF-file on my web-page in a new window but this file should be shown without any option to Print, Save, Copy or resizing option (Increase and Decrease in percentage size).
Is this actually possible. The perfect solution would be if the the buttons to print, save, copy, increase/decrease would not only be disabled but completely blinded out. My perfect solution would look like below so that the user can only navigate through the pages but he/she cannot do anything else.
Hopefully, someone can help me out.
Thank's a lot,
Jo

Hi Alexandre,
I don't think this is possible with the current APIs that
HTMLLoader exposes. (Unless webkit supports object tags that takes
the source data in base 64 encoded form, which I think is unlikely)
But it is a good feature to have. Please file a feature
request at
http://www.adobe.com/go/wish

Smart form Text module translation and Standard text

Hi i have a requirement in smartforms in which i need to create text modules and transtale into diffrent languages.
I have created text modules they are in my transport,
when i am translating through SE63 into target language it is not asking for any transport request , Can any one help me regarding how i can assign Transaltion thing to my transport.
Another thing is i require to use standard text, i am not much aware of it also as per my understanding i need to create it through SO10 Transaction , and i can use it in include text please correct me if i am wrong, i need this standart text also in two language but while creating standard text it is not asking transport request, and how i would convert standard text in diff lang and how can i assign to my transport.
Surely i would provide points for the valid reply.
Thanks in advance.

Hi Gudia San,
To transport Standard text, use the standard Report Program RSTXTRAN, execute it, on the selection screen, enter your standard text name as
Text key - name, press F8, it will display a ouput list. Now press F5 key and it will ask for transport request number.
Regards,
Abdul.
P.S: Rewards points, if useful!

Matchcode with texts in Bex and without texts in Web

Similar Messages

Maybe you are looking for