Matching IOS capwap flash image file with Wlc image file

Hello to all Wireless Expert
My question will perhaps seems a little bit obvious for some of you, but here it is :)
I'd like to understand the relation between the Capwap IOS image file that I can see while typing 'dir flash' on an AP, and the version a WLC gives to that AP when joining it. My wlc is running 7.4.100 and on the AP's flash (2602i):
MYCAPWAPAP#dir flash:
Directory of flash:/
    2  -rwx       75095  Oct 23 2014 07:54:43 +00:00  event.log
    3  -rwx         280  Oct 23 2014 07:57:35 +00:00  lwapp_officeextend.cfg
    4  -rwx       49372  Oct 23 2014 09:37:14 +00:00  lwapp_non_apspecific_reap.cfg
    5  -rwx       95008  Oct 23 2014 07:54:34 +00:00  lwapp_reap.cfg.bak
   10  drwx        2048  Oct 23 2014 07:54:33 +00:00  ap3g2-k9w8-mx.152-4.JB6
   51  drwx         128  Oct 23 2014 07:57:38 +00:00  configs
   52  -rwx          64  Oct 23 2014 07:54:34 +00:00  sensord_CSPRNG0
   53  -rwx          64  Oct 23 2014 07:54:34 +00:00  sensord_CSPRNG1
   77  -rwx       95008  Oct 23 2014 07:57:55 +00:00  lwapp_reap.cfg
    7  -rwx        7192  Oct 23 2014 09:36:56 +00:00  private-multiple-fs
   56  -rwx           0  Mar 26 2014 14:37:17 +00:00  ce
   13  drwx         448   Nov 9 2013 19:06:17 +00:00  ap3g2-rcvk9w8-mx
    8  -rwx       75303  Oct 22 2014 16:30:26 +00:00  event.capwap
   76  -rwx         230  Oct 23 2014 07:57:34 +00:00  env_vars
31739904 bytes total (10376704 bytes free)
Does it mean that the 7.4.100 image file is included in the ap3g2 file? In other word, where is stored the wlc firmware image on the AP? As an AP has a primary image and a backup one, it must be stored somewhere on it, or maybe I'm missing something here!
Thanks,
Theo

Hi Theo,
If you read this post you will understand the ap3g2 represent the AP platform.
https://supportforums.cisco.com/document/77131/understanding-access-point-ios-images
platform-featureset-tar.version.tar
ap1g1 - 700 series (702w beginning with 15.2(4)JB5)
ap1g2 - 1600 series
ap1g3 - 1530 series
ap3g2 - 3700/3600/2700/2600 series (3700 supported beginning with 15.2(4)JB; 2700 beginning with 15.2(4)JB5)
ap3g1 - 3500/1260 series
In lightweight mode, there is Recovery Imange & Full-image. (Recovery image has min files to boot the AP & discover a WLC, then  WLC will push the full image according to the software code running on WLC.
ap3g2-k9w8-mx.152-4.JB6
ap3g2-rcvk9w8-mx
In this case you can see some directories with the above name on your AP. So corresponding image should be within these sub-directories.
HTH
Rasika
**** Pls rate all useful responses ****

Similar Messages

  • Trouble converting powerpoint files with png images to pdf-Can someone help?

    Hello all,
    In my line of work, I create and modify large sized posters that are created in powerpoint. I would have the files print ready by converting them to pdf. I usually have little to no issues executing this. However, I have been dealing with an issue of converting ppt files with png images. The size of the ppt is typically a 42x56 file. The several ways to convert to pdf produces an error each time. Png images are very useful as they provide much clarity vs jpegs or tiffs. The 3 ways I have tried below are:
    A) File>Print>Adobe PDF>High Quality print settings/300dpi results to an error message that says:
         "Windows cannot print due to a problem with the current print setup. Try one of the following:
         *Check the printer by printing a test page from Windows.
         *Make sure the printer is turned on and online.
         *Reinstall the printer driver"
         A blank pdf opens up (Selected to open file after publishing)
    B) File>Save as> Change file type as a pdf results in nothing happening. No pdf is produced.
    C) Acrobat>Create PDF results to an error message that says: "An unexpected error occured. PDFMaker was unable to produce the Adobe PDF."
    Again, this all happens with ppt files with png images. I took out the png images and attempted to convert to pdf, and the pdf is produced! 
    Can anyone provide any assistance in creating pdfs with png images or what settings I need to adjust? I am able to covert every other image type (jpeg, tiff, bmp), except for png images.
    I am using Microsoft Office 2010 with Adobe Acrobat X on Windows 7 (This happened on Windows XP as well).

    >I have a 48 slide presentation that has a small .png image in the "slide
    >master" so it will show up on every page.
    PowerPoint only has to store one instance of the image even thought it is
    displayed on multiple slides. But Acrobat can't do the same, the image has
    to be stored for every page that it appears on, so that would explain the
    larger file size.
    Acrobat is supposed to be able to optimize the storage of common background
    images (at least that's the message I see when I do a "Save as..."), but I
    have yet to see it to work. Maybe it depends on the application the orginal
    file is created in and the PDF conversion method used.
    Adding the image into a PDF file later as a watermark instead may be a way
    to keep the size down (then it really only does store the object once),
    though I believe that watermark images will appear in front of everything
    else on the page (not sure if that's a problem for you, it depends on
    whether any text or objects in the presentation ever appear in front of the
    image).
    What are the dimensions and resolution of the image in PowerPoint? You may
    be able to go as low as 75 dpi and not notice a difference, it depends on
    whether the image contains any areas of high contrast or text.

  • I just got a new macbook pro, i had cs6 on my old macbook, i downloaded cs6 on my new computer today. When I open my illustrator files with vector images they appear blurry on the new computer. I have had this issue in the past and I don't

    i just got a new macbook pro, i had cs6 on my old macbook, i downloaded cs6 on my new computer today. When I open my illustrator files with vector images they appear blurry on the new computer. I have had this issue in the past and I don't

    cnsst,
    Are we talking Edit>Preferences>General>Anti-Aliased Artwork?

  • Where does Lightroom put HDR in the grid view? Is there anyway to have Lightroom stack the HDR file with the source files?

    I can't decipher where (and why) the program is putting the HDR image in the grid. I stack all of my HDR source images so they are easy to track and manage. Other apps/plugins allow you to stack resulting images with their source image. That would be great if there's a way to set that in LR preferences.

    Thanks, but this doesn't really answer the question about stacking the HDR file with the source files. Yes, it does put the file in the same folder, however many of my folders have 100s of images (that often look similar) and as far as I can tell, LR places them randomly in the sort order. It doesn't appear to put them at the beginning or end of the sort (usually by date), but somewhere randomly in the middle. Even if it could be made clear what method it is using to sort them, that would help locate one file among hundreds.
    Ideally, however it should allow you to stack with the stacked source files. Is there anyway to do this? If not, is it a feature that could be requested?

  • Hi i have a learning HTML file with a data file include a swf files how can i open it in my ipad?

    hi i have a learning HTML file with a data file include a swf files how can i open it in my ipad?

    iPad do not support flash natively.
    Look in the app store, some browsers do support flash with limited functionality.

  • Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

    Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

    Hello Fellow iBook Authors!
    Today I received the same error that you all have been discussing.  I tried selecting the DRM
    and this did not work for me, though I'm glad it did for some.  Here's what I did as a work-around. . .
    Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v.  I added an image and extended the length or timing of the image to span the length of the audio file.  Then exported as an .mov.  I then opened QuickTime and opened the file and exported the file to iTunes. 
    You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file.  Does this make sense?  I hope this helps, at least in the short-term.
    Michael Williams

  • Connect the music file with the artwork file post-computer-crash?

    I want to retrieve artwork after restoring my computer?
    So my computer (where itunes app data was stored) and my external hardrive (where my itunes library was stored) crashed, but luckily I had my itunes library was stored on dropbox so I have that uploading to my revived computer!
    I have access to all my "old computer's" files (via a mounted image file that looks just like an external drive H: )
    The "old computer" itunes used my dropbox folder for the library (J:work\Dropbox\Allen's Transfer Folder\iTunes)
    my "New comuter" uses a local folder but the contents are exactly the same (C:\Companies\Dropbox\Allen's Transfer Folder\iTunes)
    How can I get the artwork data from my "old computer" onto my "new computer" so that itunes will connect the music file with the artwork file?
    is there a data file and will they automatically sync to the artwork if they are in different locations?
    Thank you for your help, Allen

    pfanzier wrote:
    … is there any reason i shouldn't delete the artwork folder?
    All of my music is from CDs, so all of my cover art are scanned images that I added to the music files in iTunes. My Album Artwork folder is heavily populated nonetheless. Thus, it stands to reason that if you delete the folder, just like every other default item in your iTunes folder it will be recreated when you launch iTunes. If I recall correctly, that folder also holds the data files for building your CoverFlow.
    pfanzier wrote:
    itunes only demarcates songs whose files are missing with an exclamation point after i click on the song. otherwise everything appears as normal. if i quit itunes and reopen it, nothing is marked with the exclamation point until i click on it.
    I personally have never had an issue with missing song links, but based on what I had read on the Macworld forums over the years, when links are lost, people start seeing /!\ next to several tracks in their iTunes library. Of course, most of the instances that I have read about have been after iTunes updates so perhaps it is during the library updating after a software update that causes the automatic detection of broken links. Otherwise, it does make sense that iTunes would not check a link until the user selects an unlinked song, because iTunes does not, and should not, scan your entire library for no apparent reason.

  • Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path

    Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path using any of these perfectly normal methods:
    1. double-click file in the Finder (e.g in a Folder on your Mac or on your Mac desktop etc.)
    2. select file and choose "File... Open" command-o in the Finder
    3. drag file to the application icon in the Finder.
    4. Select file in Bridge and double-click, choose File.. Open.. or Drag icon to InDesign icon in dock.
    If you try to open an ID file named with a "#", you will get an error message "Missing required parameter 'from' for event 'open.'"
    This happens to any InDesign file that has a "#" (pound sign, number sign, or hash) in the filename or in the file path (any parent folder).
    To reproduce
    Name an InDesign file Test#.idd Try to open it in the Finder or Bridge (as opposed to the "Open" dilaog of InDeisng itself).
    "Solution"
    The file WILL open using File... Open... command-o while in InDesign application.
    Rename the file or folders that have a "#" (shift-3) in the filename.
    Report to Adobe if it bugs you.
    This does not occur in "plain" Leopard 10.5 nor Tiger 10.4
    Untested in Panther or before and
    Untested with CS3 and earlier in Snow Leaopard.
    Anyone have those and want to try this... ?

    In case this really bothers you: we've added a workaround for this into Soxy. If you enable the option, these documents will open fine on double-click.
    You need Soxy 1.0.7 from:
    http://www.rorohiko.com/soxy
    Go to the 'Soxy' - 'Preferences' - 'Other' dialog window, and enable 'Open InDesign via Script'
    (Irrelevant background info (it's all invisible to the user): the workaround works by special-casing how Soxy opens documents in InDesign: instead of using AppleScript, Soxy will use ExtendScript to instruct InDesign to open the document - which works fine).

  • Creating IPA file with Multiple SWF files using ADT

    Iam successfully able to create ipa files using the ADT package but my next requirement is to create an IPA file with multiple swf files.I think it might be easy if your SWF files are regular the tough part is my swf file has lot of action script in it so the only option is to through the command prompt and using the ADT package of Adobe AIR.So now i have 10 SWF files like this and iam creating ipa file for each swf seperatly but now I want to put all of the swf files into one ipa file.Please let me know if i was not clear in my description

    I think you are trying to explain how to load two swf's one with action
    script and loading an other swf file which should be non action script.If
    you read my requirement carefully.I have all the same type of swf's and
    these swf are automatically created as a form of output for xcelsius dash
    board software.Iam capable of creating individialu ipa files from these swf
    files.So when I try to combine the same kind of swf files the first error
    its giving is the file name which I have used in the xml.in the main file
    name for the swf file its not considering the two swf file name in the
    initial window.so the adt package in the command line is not understanding
    the file name from the xml and the command prompt and giving error this swf
    file does not exist.So please consider how to combine two swf files with AS3
    into one ipa file.These swf files are not editable,Let me know if you find
    any idea to achieve this

  • Cannot open a a file with a specific file name

    I have 1 person who cannot open or save a file with a specific file name on his computer.  If he does it at another computer he is fine, no one else has this issue.  The error he gets when trying to open the file is { Cannot create file:missingperson.pdf. Right-click the folder you want to create the file in, and then click Properties on the shortcut menu to check your permissions for the folder}
    Any ideas on how to resove this.  He gets this file sent to him on a regular basis, and cannot have the file name changed.
    Thank you

    I have run across something similar.  Assuming that this PDF they are getting through email is the same name, then this is how I fixed my problem.
    When you get a file in an email and open it, it writes that file to the Temporary Internet Files folder.  Lets assume the file name is filename.pdf  If you open a file from email with the same name at a later time, it creates a file called filename(1).pdf.  Open a file with the same name again, it creates filename(2).pdf, and so on.  Once you get to filename(99).pdf, it will start giving you a lot of trouble.  When I cleared out those filename.pdf's, everything went back to normal.
    Hope this helps.

  • One of my imacs are saving all my files with a capitalized file extension?!

    one of my imacs are saving all my files with a capitalized file extension?! For example: .psd is .PSD this really suck because I keep getting to versions of all my files. Can someone please assist me in fixing this. Thanks! -derek

    Welcome to Apple Discussions!
    Did you format your hard disk on that Mac any differently?

  • How I can combine pdf file with other pdf file

    How I can combine pdf file with other pdf file ?

    Or from Adobe Reader via https://createpdf.acrobat.com/

  • Update jar file with modified class files

    hi all,
    I'm developing a jar utility for updating a jar file with modified class files as of now i have reached a point where in i can browse files and set it to required location
    i.e i have developed a swings GUI application using JfileChooser and browse the files ..now my requirement is to update the jar files with modified class file
    GUI looks like below
    ....enter the modified class file ----> d:\c.class
    ....enter the jar file path ---> d:\a.jar
                                                          update button now i have the requirement as
    1> when i click on the update button ,my jar file (a.jar) should get updated with the latest class file (c.class)
    can u help me to achieve this requirement.???
    im stuck with this,,,if u can provide me wit the code for updating jar file with latest class file...it will really be helpful
    if u can help me with the code on click on update button it will be really helpful
    Thanks and expecting a faster response from u all java experts....

    Please find my query in bolds...i have written the partial code now,i need some help now
    hope u guys can help me out...
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.io.File;
    public class FileExplorer extends JDialog implements ActionListener
         JTextField txtLocation_class;
         JButton btnBrowse_class;
         JLabel label_class;
         JTextField txtLocation_jar;
         JButton btnBrowse_jar;
         JLabel label_jar;
         JButton updatebutton;
         public FileExplorer()
                   setSize(600,300);
                   //for class files
                   label_class = new JLabel("Please select Modified Class File");
                   txtLocation_class= new JTextField(20);
                   btnBrowse_class = new JButton("Browse");
                   btnBrowse_class.addActionListener(this);
                   //for jar files               
                   label_jar = new JLabel(" Please select the Jar file");
                   txtLocation_jar= new JTextField(20);
                   btnBrowse_jar = new JButton("Browse");
                   btnBrowse_jar.addActionListener(this);
                   ActionListener updateListener = new ActionListener(){
                    public void actionPerformed(ActionEvent ae){
                     if(ae.getActionCommand().equalsIgnoreCase("Update")){               
                      System.out.println("ae.getActionCommand() :: "+ae.getActionCommand());
                      System.out.println("Update Button is pressed");               
                    *//Query :how do i access FilePath and FilePath1 here which*
    *                // has been set in public void actionPerformed(ActionEvent ae)*
    *                //method below*
    *                // FilePath  ---??*
    *                // FilePath1  ---??*
    *                // how do i access the above 2 parameters*
    *                //Query :on click of update button i have to pass*
    *                //two parameters FilePath and FilePath1 to*
    *                //perform some functionality. please help me*
    *                //to achieve this..how do i access Filepath and Filepath1*
    *                //here which has been set below.*
                     } // end of if               
                   } // end of actionPerformed
                };// end of ActionListener
                  updatebutton = new JButton("Update");
                  updatebutton.addActionListener(updateListener);
                   //adding to the panel               
                   JPanel pnl = new JPanel();
                   pnl.add(label_class);
                   pnl.add(txtLocation_class);
                   pnl.add(btnBrowse_class);
                   pnl.add(label_jar);
                   pnl.add(txtLocation_jar);
                   pnl.add(btnBrowse_jar);
                  pnl.add(updatebutton);
                   getContentPane().add(pnl);                         
         public void actionPerformed(ActionEvent ae)
              Object obj=ae.getSource();
              if(obj==btnBrowse_class)
                   final JFileChooser fcstudent = new JFileChooser();
                   int rtrnval = fcstudent.showOpenDialog(this);
                   if(rtrnval==JFileChooser.APPROVE_OPTION)
                        try
                             File file=fcstudent.getSelectedFile();                         
                             String path = file.getPath();
                             System.out.println("This is Path:"+path);
                             txtLocation_class.setText(""+path);
                             String FilePath=txtLocation_class.getText();
                             System.out.println("FilePath is ::"+FilePath);                                        
                        catch(Exception ex)               
                             ex.printStackTrace();
              }else if(obj==btnBrowse_jar){
                             final JFileChooser fcstudent = new JFileChooser();
                             int rtrnval = fcstudent.showOpenDialog(this);
                             if(rtrnval==JFileChooser.APPROVE_OPTION)
                                  try
                                       File file=fcstudent.getSelectedFile();                         
                                       String path1 = file.getPath();
                                       System.out.println("This is Path:"+path1);
                                       txtLocation_jar.setText(""+path1);
                                       String FilePath1=txtLocation_jar.getText();
                                       System.out.println("FilePath is ::"+FilePath1);                                        
                                  catch(Exception ex)               
                                       ex.printStackTrace();
         public static void main(String arg[]){
                   FileExplorer Exm= new FileExplorer();
                   Exm.setVisible(true);
    }

  • How do I stop Apple Script from leaving a Text.txt file with each image downloaded using Photo Downloader in Adobe Photoshop CS4_Bridge???

    I use Adobe Photoshop CS4_Bridge _Photo Downloader to import images from CF Cards into my 11" Mac Book Air.  I have an issue with the Text files
    that seem to accompany each and every image that I do not need.  How do I stop Apple Script (which I assume is the culprit in this case)  from interferring with this process.

    Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
    If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
    Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
    Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
    Download iWebBackup Here
    You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
    http://iWebFAQ.com

  • Issue of importing MS WORD file with inline images in 5.5 that did not exist in 5

    Briefly, all of the files I created from dropping in MS WORD files with images look exactly the same in ID 5 as they do in WORD.
    When I tried importing the same WORD files in ID 5.5, they look screwed up. For example, in WORD and CS5, the images were perfectly sized and aligned to fit the margins  Then, on exporting to various formats (eg., PDF, EPUB), the program hangs around the 85% completion mark, and I have to manually end the program. I have mixed graphic formats on the images, JPG, GIF, and PNG, if that makes any difference.
    Thanks.
    PS: This input box will not accept hard returns - only manual line breaks. Is that normal?

    I forgot to say that all of the same images in 5.5 are shown in various sizes. Resizing the frames manually, and then clicking on "Fit contents to frame," will of course, correct the problem, but it is frustrating to do.

Maybe you are looking for