Matching Route Patterns with standard Local Route group and Specific Route Group

Hi
I have a customer with CUCM 8.6 with few branches
couple of branches in UK and few in Europe and middle east.
I configured route patterns with Standard local route group, but using their own Voice gateway, everything was working fine until adding the recent branch with matching pattern
UK has a mobile pattern with 9.07XXXXXXXXX (11 digits)
One Branch has a mobile with 9.07XXXXXXXX (10 digits)
When branch call 907X..(10digit) number there was a delay and I ticked the Urgent priority to process it quicker, but later realized the UK branch cannot dial 907x.. (11Digit) mobile.
I created Route List for branch and added the 10 digit pattern to that but still the UK cannot call 11 digit. so i believe when you call out it will check the pattern first and the Route-List and Route-Group and gateway play a part.
Is there a way to get 07 -10digit call out quickly also allowing the 07 -11digit pattern as well ( without changing the T302 timer)
Really appreciate your support
thanks
shameer

Yes, they key to managing overlapping centralized dial plans is to be really good with patterns, partitions, and CSSs. You can have 3 different 9.0[2-9]XX-[2-9]XX-XXXX patterns and assign them a different partition, and then assign that to the branch CSS. This will only work if each Branch has a different CSS.
For example:
9.0[2-9]XX-[2-9]XX-XXXX @ Egypt-PT ->Routes to Local route group of Egypt.
9.0[2-9]XX-[2-9]XX-XXX @ UK-PT -> Routes to Local route group of UK
9.0[2-9]XX-[2-9]XX-XXX @ Germany-PT -> Routes to Local Route group of Germany.
//PT = partition//
Then have Egypt-CSS that contains 9.0[2-9]XX-[2-9]XX-XXXX @ Egypt-PT.
UK-CSS contains 9.0[2-9]XX-[2-9]XX-XXX @ UK-PT
Germany- CSS contains 9.0[2-9]XX-[2-9]XX-XXX @ UK-PT
The other patterns will be invisible to your sites because they are in a different partition that is not in their CSS. 2 overlapping patterns in the same PT will cause you to wait for the inter-digit timeout unless you press #.
Thanks,
Frank

Similar Messages

Route Pattern with Pause in CUCM 10.5

Dear Experts,
I need to create a route pattern with a pause to dial a secondary number.
the customer is forwarding international calls to tollfree number, then the user is dialling the international number.
He is requesting to make it as one step, dial the prefix and international number at the same time.
the pattern is 44.00!
44 will be transformed to the toll free number, and the rest is the international number.
Any idea
thank in advance
Regards
Anas

Jonathan is correct (+5) - Route pattern and neither the translation pattern would not be able to do that. Tried in my lab CUCM 10.5, it doesn't recognizes comma as a valid entry :
You can configure pause in the pots dial-peer by comma, but I doubt it will be helpful here.
-Terry

Route pattern with called party transformations

HI All,
i wanto to add route pattern with transformation
i want to add RP with 9.001! predot
and want to convert to 9.01017! with called party transformations.
How we replace ! ? i've tried and it's error with message
Called Party Transform Mask - allowed characters are numeric (0-9),plus (+),asterisk (*),pound (#),X.
I've give screen shot for the configuration
Please anybody help.
Thanks in advance
Regards,
ATommy

You can create the RP with 9001.! and in the called party, discard predot and prefix 901017.
see below screenshot:

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

Can I get an Ipad with wifi and cellular but no contract with a carrier in the US? I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

Can I get an Ipad with wifi and cellular but no contract with a carrier in the US? I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

Yes you can. All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries

Customer Groups and Customer Credit Groups

Hello
I was going through the documentation for Credit Management, but I was confused on what the difference was between customer groups and customer CREDIT Groups.. both of them sort of have the same definition, then what is the difference ?
Please help me out.
Regards,

Hi Raj,
For your info :
The <b>credit group</b> groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the automatic credit check.
Default settings
The following credit groups are contained in the standard SAP R/3 System:
01 = credit group for sales order
02 = credit group for delivery
03 = credit group for goods issue
Actions
1. Check whether you can use the credit groups in the standard system.
2. If you need to create new credit groups, enter an alphanumeric key with two characters and a descripion for the credit group.
A <b>customer group</b> tells to which a customer can belongs to.
You specify the customer group for sales data in the customer master record for each sales area.
The SAP System copies this specification automatically into the sales documents at header and item level. Here, you will find the customer group on the detail screen for general business data.
Actions
1. Specify an alphanumeric key which can have up to 2 characters and a description for the customer groups.
2. Make sure that the customer groups are entered in the customer master records.
Hope it helps. Pl reward if useful.
Thanks & Regards
Sadhu Kishore

Add field group and Logical field group for ANLU

Hi all,
On my project, the table ANLU is containing many specifics fields.
I would like to know how I could add a field group and logical field group corresponding to this specifics fields on ANLU, in order to be taking into account on my validation rule ?
On the GGB0, Asset Accounting / master data, the check point includes the ANLU on the table fields. But, once my rule created, when I want to activate it on the TCODE OACV, the field group proposed don't include data from ANLU (only ANLA and ANLB)
I found out the TCODE OAVM listing all different field linked to the field group. Does it possible to manage this view ?
please help me !!

Hi Rob,
Can you tell me how can i solve this issue.
Runtime Errors         MOVE_TO_LIT_NOTALLOWED
Date and Time          09/11/2007 18:11:01
Short text
    Assignment error: A constant was meant to be overwritten.
Error analysis
    The field "<S1>" is to be assigned a new value although the field
    is partially or entirely protected against modifications.
    The following are protected against changes:
    - Character literals or numeric literals
    - Constants (CONSTANTS)
    - Parameters of the category IMPORTING REFERENCE for functions and
    methods
    - Untyped field symbols not yet assigned a field using ASSIGN
    - TABLES parameters if the actual parameter is protected against changes
    - USING reference parameters and CHANGING parameters for FORMs, if the
    actual parameter is protected against changes and
    - Accesses using field symbols if the field assigned using ASSIGN is
    protected (or partially protected, e.g. key components of an internal
    table with the type SORTED or HASHED TABLE) against changes
    - Accesses using references, if the field bound to the reference is
    protected (or partially protected) against changes
    - External write accesses to READ-ONLY attributes,
    - Content of a shared object area instance accessed using a shared lock
    (ATTACH_FOR_READ).
Thanks
Ashraf

Issue on profit center group and profit center group hierarchy

hi experts
I have a requirement where i have profit center,profit center group and profit center group hierarchy.
profit center group and profit center group hierarchy are same?if they are same how to get them into BI.if they are not same how to get them into BI
im using two datasources 2lis_11_vaitm and 2lis_12_vcitm,how to connect the profit center group and profit center group hierarchy with the datasources,My dataflow is on top of these datasources there are two write optimised dso and on top of those w-o dso there are std dso and on top of the std dso there is a infocube.on infocube there is multiprovider
Thanks,
sivaram

Hi Sivaram,
Profit Center would be an attribute of any object which is used in the 2lis datasources. maybe CO Order or WBS etc...from these objects Profit Center should be or could be made as navigational attribute.
Further you can load the master data and hierarchy from the datasource 0PROFIT_CTR_0106_HIER
Hope this helps.
Good Luck.
Vikram

Function module for Profit Center group and Cost Center group changes

All,
The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
Help is much appreciated.
Regards,
Hari

All,
The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
Help is much appreciated.
Regards,
Hari

Account Group and Cash Mgmnt group in vendor

Hi,
What the purpose of the "account group" and " Cash mgmnt group " when I create a Vendor using XK01.
Tks,
Sandra Amadi

Hi Sandra
Account group is basicaly use for segregarion of vendors based on their relation with Business. It is a purely business decission for easy and user freindly reports of and control of vendors.
find more at SAP help at beow link
http://help.sap.com/saphelp_47x200/helpdata/en/53/c98647ca3711d2b494006094b9114a/frameset.htm
In cash management, customers and vendors are allocated to planning groups by means of an entry made in the master record.
for example:
R1 Customers paying by bank collection
R2 Other domestic customers
R3 Customers abroad
R4 Affiliated company customers
R5 High risk customers
R6 Major customers
R7 Rental income
R8 Repayment of loans
E1 Domestic vendors
E2 Vendors abroad
E3 Affiliated company vendors
E4 Major vendors
E5 Personnel costs
E6 Taxes
E7 Investments
Hope this info will helpful for you.
best regards
S.Habib Pasha.

How to find screen group and subsequent screen group from program number

Hi all there,
Can anybody tell me how to find out screen group and subsequent screen group from program number.
I need it to find next screen number in VF01 transaction
I am doing recording in VF01 after entering delivery number which is on screen number 0102 and pressing enter sometime it goes to screen number 0103 and sometime it goes to screen number 0104
I wanted to find out on what condition it goes to these screen
Regards
Sagar

hi,
for konwing the screen flow you ...just use the press (ctrlshiftF5) now you will get the flow ...now just click on screen number 102 then go inside the PAI by double clicking on user command...
search for screen numbers 103 or 104 now check on what condition it will get tirrgered..
with regrads
janani

What is difference between user group and reference user group?

hi
guys,
what is difference between user group and reference user group?
your regards
p.suresh

Hi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM

Accoutning Groups and Profit centre groups

Hi All,
Please help me in this issues..
1) Is there any way to get all accounts in accounting group by specifying controll area and accounting group.
2) Is there any database table which stores accounting group and profit center group together.. or is there any way to pick accounting group for particular profit center group and vice versa..
please help me

Hi,
SETNODE and SETLEAF are the tables which contains All groups like Cost center, Profit Center and accounting groups etc and their related Cost center, profit center and Accounts.
By writing the Nested selects for this we can retrive all the accounts, CC's and Profit centers from it.
CC Group = '101' and PC Group = '0106' etc
Or you can use the following fun modules:
G_SET_TREE_IMPORT
G_SET_GET_ALL VALUES
Regards,
Anji

Table name for Internal order group and Profit center group

Hello Friends,
Could any one provide me the table for Internal order group and Profit center group.
We are developing new customized report and user requested internal order group and Profit center group in the selection criteria.
I have checked for this tables but found only these fields in structures.
Thanks in advance,
Ravi Kiran.

Or use FM [G_SET_TREE_IMPORT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=g_set_tree_import] to read the hierarchy/Group. (Read FM and FG documentation, you can also add break-point and call some S_ALRxxx transaction which use this FM for the objects you need).
Regards,
Raymond

Employee Group , Employee Sub Group and Pay Scale Group

Hi Experts,
In which table or feature we are grouping
Employee Group , Employee Sub Group and Pay Scale Group
Thanks in Advacne.
Regards,
IFF

Hi
All groupings are based on the SAP HR sub modules like for Time fro Personal work schedule we group in table V_001P_N
So for each sub module we have different table.
Please specify your exact requirement.
Thanks
Sheetal

Matching Route Patterns with standard Local Route group and Specific Route Group

Similar Messages

Maybe you are looking for