Matching Shot Plug in for FCP 7???

HI,
Is there a piece of software or 3rd Party Plugin that lets you match one shot to another?
I have a wedding ceremony that was shot with 2 cameras. The main camera looks great. The color is fine.
The second Camera, B-Roll footage, looks a little off. I want to make it look like the 1st camera does.
In Premiere Pro they have something called RE:MATCH which will match one clip to another clip.
I was wonderng if you can get a plugin like this for FCP 7?
Thanks.
FCP 7
Mac Pro
Intel Xeon
10 Gb RAM

FCP has had 'Match Hue' in the Color Corrector 3 Way since version 4.5. Here's how to use it: http://www.kenstone.net/fcp_homepage/match_hue_fcp_5_balis.html
-DH

Similar Messages

Is there a good motion tracking plug-in for FCP-X?

The question is in the headline: Is there a good motion tracking plug-in for FCP-X?
You know, like when I want to blur out, say, a license plate number on a moving car.
I know of no plug-ins for FCP-X that will do this. Surely there's one out there.
And since you can't just export a sequence to Motion (like you could in FCP 7), how would one achieve this in FCP-X?

R&B wrote:
… And since you can't just export a sequence to Motion …
instead of selecting a clip or sequence in FCPX, you set the in/out points in the Export/Send it to Compressor dialog.
the exported mov can be tracked in Motion5 …-
aaaand finally re-imported into FCPX.
… not exactly as convenient as in the old FC/p , but the tracker in M5 offers, imho as a hobbyist, superb results.-

How to build a plug-in for FCP

I want to build an export plug-in for FCP. It is a little similar to Automatic duck export plug-in. I want to export sequence in my own format.
The version of Final Cut Pro is 6.0.
I downloaded FxPlug SDK, but it is only about video effect, not what i want.
And I didn’t find any other documents about how to build an export plug-in for FCP.
Who has some related documents or can support me on this?
I will pay for the help if i can afford it.

I don't own Automatic Duck so I don't know how that particular application goes about doing this, but the only way I can think of doing it is through a QuickTime Export Component.
http://developer.apple.com/documentation/QuickTime/Rm/ImportExport/DataExchange/ A-Intro/chapter1_section1.html

Free plug ins for fcp

so a few have suggested a couple free plug ins for the garbage point masks, and i do apreciate it, this question is in regards to free plugins in general.. how safe are they and the sites there found on? what are the chances ill ruin my new mac by putting them on my system, sorry to ask so much but im just trying to learn as i go,
thanks in advance
Brucey Bizzit

Many of the posters here author them -- some without cost and some sold.
Are the sites safe? From what?
Never heard of a plug in for FCP ruining a computer. If they don't work or cause issues, just trash them
Google: "free Final Cut Pro plug ins"
http://www.google.com/search?client=safari&rls=en-us&q=freefinal+cut+proplugins&ie=UTF-8&oe=UTF-8

Flash frame plug-in for FCP

Hello,
maybe somebody has a flash frame plug-in for FCP and could share it with me?

yes.
if you go here - http://www.mattias.nu/plugins/ you can download a FREE bundle of excellent fliters/transitions... one of which is a superb flashframe transition... i use it all the time!

How do you install "Twixtor" excellent Slow Motion plug in for FCP

Hi,
I have the Twixtor FxPlug Pro v5.0.1 but can't get to install it properly.
I have seen some posts in the web but for me there is no clue how to install it.
The installer installs it in the root of HD folder, but later they say you have to "move" it where the plug ins for FCP are.... which I don't know....
The only links I found of help, but in my case I could'n solve it, were:
http://www.cinema5d.com/viewtopic.php?f=24&t=21416&start=0&st=0&sk=t&sd=a
http://discussions.apple.com/message.jspa?messageID=3188319
Any one can help with this? THANKS!

installation instructions are all on there web site:
[plugin installation|http://www.geniusdv.com/newsand_tutorials/2008/01/where_to_put_plug_ins_in_final_cutpro.php]

Is There A Noise Reduction Plug-in For FCP?

Wondering if I could find a plug-in for FCP5 or Color that will reduce the noise shot with high ISO in low light. Does anyone have a suggestion. Thanks!
Message was edited by: sburst7

I have found the 'Noise Reduction' in the CHV repair collection for FCP to be the best out of anything that I have ever tried. The noise reduction is fantastic and the sharpness loss is the best out everything I have seen.
http://www.chv-plugins.com/cms/Fx-Script/Repair-collection/Repair-collection.php
The default settings can be a little excessive, I almost always end up with a setting of 10 and 15 regardless of the footage.
Also, you can try grain reduction inside of colour - pair it with a vignette and alpha blend to limit it to specific areas.
Cheers,
Liam.

How do you install "Twixtor" plug in for FCP

Hello,
I think I have installed it properly, I'm not to sure... In FCP i click on "EFFECTS/Video Filters/RE: Vision Plug-in/ and I see
Twixtor 4
TWixtor 4.5 pro
Twixor 4.5 vector
but when i click it nothing happens... shouldn't a box pop in the viwer window unter the "Motion" tab?
I tried ReVision's support but their forum is confusing - so i thought to ask my fellow Mac friends!!!
LEt me know if there is a tutorial on installing it - and how can I tell and where do I look for to see it installed. I downloaded their tutorial but they assume u installed the program properly...
Regards,
Joey

Simon,
Mate you can do some pretty dope stuff with Twixtor it's a good plug in as for Shake I never used it but the check this out
http://www.revisionfx.com/rstwixtortutorials.htm
Downlaod the tutorial that is 215mb and read some of the stuff - it will give you an idea how sophisticated Twixtor is in terms of frames and so forth! I like it Im still messing around with it... the only thing I have an issue with is learning how to synch the audio & the lips movement of my characters so when i put it in slow mo everythings fits well... i hope that made sense...
My best,
Joey

Favorite 3rd Party Plug-ins for FCP X?

Hey, everyone.
I was wondering what are some 3rd party plug-ins that you folks are using that you recommend?
I'm using FCPeffects' Light Rays. Works well for me.
Thanks!

ShrinkRay from CrumplePop i cool.. and their splitscreen also..

SmartSound QuickTracks plug-in for CS4 now available

It has just come to my attention that SmartSound has released a new update for their QuickTracks for Premiere CS4. It's now on their site, HERE.
Note that the original plug-in for previous versions of PrPro (CS3 and earlier) and also most versions of PrE is there too.
If one needs a bit of background on SmartSound, this ARTICLE might give them some tips.
Hunt

Also, since SmartSound's Sonicfire 5 plug-in for FCP (Mac only) has been released, there is hope that this wonderful program will soon be a plug-in for PrPro too!!!!
Hunt

I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer. Any help is appreciated.

Russ and Luis,
I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in. Still no luck. I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support This is where it is supposed to be as far as I can figure out.
Another piece of the puzzle is that footage shot on a Canon C300 in 2013 and I reimported today and it DOES import into FCP10.1.3. Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX. The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
Any ideas? (screen shots below)
Thanks.
Peace, Huey
FYI Here is what Canon says
"There is another trick that works sometimes though. Try uninstalling the plugin and XF Utility. Then, install the latest XF Utility, followed by the plugin, in that order."
I did do this but no results. Otherwise they say I need to wait for a new plugin.
Here's 2014 Canon C300 files does NOT import to FCPX
Here's 2013 Canon C300 files does import into FCPX. I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that.

FCP plug in for specific effect

I want to know if there is a specific plug-in or effect I can create in FCP that will give me an effect that looks like a flare around a person or object.
The effect is a kind of radiating effect that goes all the way around the subject, and moves with the subject. I hope this makes sense.
Suggestons?
Thanks!

Oops, first let me say that I am running 5.0.2 - not 5.1.2 - so the Volumetrix FX probably wont' run on my ssytems. I did lookat their website and that is the effect that is cloes to waht I want. Now, on to rotoscoping - this is something I've heard about but do not fully understand. I know it is used alot, but I am not really familiar with how it is done. Suggestions on where to find info?
And any ideas for FCP 5.0.2?
Thanks!
Message was edited by: ArEss
Message was edited by: ArEss

Payment engine - Plug-In for own file format

Hi,
I developed a plug-in for the payment engine (2004C for Poland) which generally can be debugged/compared/deployed successfully.
But: Depending on choosing certain company databases, it's posible/not possible to run the project of the add-on from the debugging environment. If I choose one of the "incorrect" databases, starting the debugger using Visual Studio .NET 2003 succeeds, but I am getting two popup windows within the B1-GUI and one popup outside of B1:
1. window within B1: "Check database". To my mind, this popup is generated by the payment engine.
2.window within B1: "The database has been upgraded to a more recent version of the SAP Add-on, please upgrade the SAP Add-On on this computer to version 6.70.2.0"
At this time within Visual Studio, I can notice two exceptions thrown by a corresponding thread: First-chance exception at 0x7c812a5b in SBOAddOn.exe: Microsoft C++ exception: MalformedURLException @ 0x0112b6b4.
First-chance exception at 0x7c812a5b in SBOAddOn.exe: Microsoft C++ exception: [rethrow] @ 0x00000000.
3. window outside of B1: "SAP Add-On terminated due to required software update"
This means to me: The process of debugging starts as usual (successful). Thereby, the payment engine is started (successful). After that, it seems to me that the payment-engine is either comparing different library version of certain dll's / AddOn.exe as stated in SAP notice 1156374 or comparing information stored in the database table of the company and - due to the result -terminates. This behaviour seems depend on the selected company-database.
Did anyone notice a similar behaviour of payment-engine plug-ins? Is it possible to change data (within the company database or somewhere else) in order to be able to debug the affected company databases again?
Best regards,
Norbert
SAP - Notice: 1156374
Symptom
When you start an SAP addon, sometimes it will show an error message like this, "The Database was upgraded to a newer Version of the SAP Add-on; please perform an upgrade of the SAP Addons to Version X.XX.XX.XX on this
client also."
Cause and Prerequisites
Usually, an addon is comprised of two parts, addon exe with relevant dlls installed in addon folder and a BFAddonFramework.dll in windows' system32
folder which will provide common functionality for addons to connect with SBO and some other utilities like db operation, form operation etc.
As we will release a new addon patch only when there are bug fixes in this period, not all addons have relevant patch comforming to the patch No.
Some addons will do version check before starting up successfully, and this check will compare the version difference between addon and framework dll.
If they do not match, such a warning message will display. This is a friendly notification warning you that issue may occur when the versions do not match, but normally they can work properly with each other.
If we have framework changed a bit which will cause the incompatibility between addons and framework, we will release addons with relevant framework version. That is in our concern.
Solution
Normally, the error message will not affect the addon's behavior. You should just ignore it.

There are commercial plugins from DTP Tools and Markzware that will allow you to open a PDF and convert to .indd directly, but that's the only way to edit a PDF inside ID, and there may be some loss in translation.
You can export the images and the text from the PDF using Acrobat pro, then plalce the PDF into ID as a template on which to rebuild, or you can try to obtain the original files used to create the PDF. As a format, PDF is inteneded to be the final output, not subject to further editing.

Experimental WIC import plug-in for Photoshop

Hello,
For what it's worth, I've written a small import plug-in for Photoshop, that uses WIC codecs to access the image files and thus is compatible with manufacturer-provided decoders such as the Nikon NEF codec and the Canon CRW/CR2 codec. It should presumably work with the new Nikon NRW codec, supporting the Nikon P6000 camera, when it comes out.
This is an experimental plugin, provided on an "as-is" basis.
http://www.fastpictureviewer.com/bin/WICAcquirePlugIn-ALPHA.zip
There is no color-management support in this version, if you import, say, an image shot in Adobe RGB, you have to use "Edit->Assign Profile..." after importing to let Photoshop know about the image's profile. The plug-in was tested with CS3 but does not depends on anything except WIC, so it *may* work in other apps able to use Photoshop import plugins.

New cameras need a new plug-in. Adobe only updates the plug-in for the current version of elements. Since your Elements is one version out-of-date, your camera may be too new. Help / Updates in Elements should find the latest version of the plug-in that is still applicable.
If your camera is too new, then you’ll need to purchase an upgrade to PSE 11, or use the newest DNG Converter 7.3 to convert your NEFs to DNGs that will open in an older version of the plug-in.
You can find the various updates on http://www.adobe.com/downloads/updates using the dropdown list near the top.

Plug-in for StarTech Video Capture Card

StarTech'website shows their ECHDCAP ExpressCard video capture card supports Adobe Premiere CS5 plug-in for editing. I talked to a Tech at StarTech and he said the card should work with Premiere Pro CS5 & CS6 but StarTech doesn't support it, and he didn't know where I can get the Premiere SC5 plug-in. Does anyone know what plug-in StarTech is referring to, and where I can get it?
If anyone is currently using the ECHDCAP capture card or the StarTech USB3HDCAP Capture Device, please let me know how you got it working with Premiere Pro.

Ann & Bill,
I probably should have given you more information. This application is different than what I usually use Premiere for.
One of my hobbies is shooting long range rifles at 1,000 yards. I'm trying to capture the point of impact on steel targets 500 to 1,000 yards away. I've attached my XA10 to my Swarovski spotting scope so I can see the impact. I've been transferring the video from the XA10 to my computer through the USB port, then importing the video into Premiere and adding it to the sequence. By the time I get all this done, then scrub the video to find the frame with the initial BANG, then count 41 frames forward for 870 yards, then scrub the video again to find the impact point, the wind and several other conditions have changed which affect my next shot. this makes for a long and tedious day.
The bottom line is... I'm trying to streamline my workflow so I can capture the video from my XA10 straight to a Premiere sequence, then start scrubbing the video to find the point of impact.
The reason I'm using Premiere is because none of my other programs allow me to scrub with audio.
I would prefer not to spend $600 for a Maxtor MX02 Mini and ExpressCard adapter; especially since it requires 110 volts and that's not available at the shooting range.
If you know of another way to do this, or can recommend an inexpensive program that will allow me to capture audio and video from my XA10 and scrub it with audio, I'd sure appreciate hearing about it.
Thank you,
Brian Scura...

Matching Shot Plug in for FCP 7???

Similar Messages

Maybe you are looking for