Materia master warehouse management view

Hi Experts
In OMS2 I have enabled the Warehouse Management view for ROH & HALB.
But In MM01 appears both warehouse management view 1 & 2.
How do i restrict it to appear view 1 only and not . Also how to control in the field reference for a specific plant only. I have assigned a new field reference #0009.
thanks
Edited by: SAP-MM1 on Aug 25, 2011 4:40 PM

Hello ,
For Field Reference please make sure you have maintained the following:
Txn OMSR
Eg Field MBEW - MTORG -> Selection group 128
in Txn OMS9
Field Selection group 128 Field reference 0009 -> Optional Entry
Txn OMSA
Plant 1000 -> Field reference 0009..
As for Views , you cant restrict by authorisation for just one view . You can restrict the wholw view by using Authorisatio Object M_MATE_STA. OR you can customise screens. Please look at note 44410
Regards
Amber

Similar Messages

Reg : Material warehouse management view 1 & 2

Hello All,
Using a Z-programI am extending the warehouse managemnt view for a single Plant, the view gets created successfully. But some how an Inactive version of Warehouse management view gets created for other plant also. How we can prevent the creation of this inactive view creation.
Please let me know your suggestion.
Regards,
Ravi Kasale.

from Note 545626 - FAQ: Data transfer problems:
Read the explanations in OSS Note 67616.
Bear in mind that, in the structure/table HEADDATA, the for BAPI methods StandardMaterial.SaveData (BAPI_MATERIAL_SAVEDATA) and StandardMaterial.SaveReplica (BAPI_MATERIAL_SAVEREPLICA) of the business object BUS1001006, you can select the required views and these correspond to the respective maintenance status.
In the segment E1MARAM of the MATMAS IDocs, you can assign the overall maintenance status in the field VPSTA.
Edited by: Jürgen L. on Jun 6, 2011 4:01 PM

Delete the warehouse management view and archive before deleting.

Hi All,
I have requirement like this where I need to delete the warehouse management view from about 40k records
also need to archive the materials in order for the views to truly be deleted, instead of just marked for deletion.
Could you please help me in proceeding with this.
Thanks,
Reddy

Hi,
in this way which I described you will delete the warehouse managment view for the material ( after that your material will no longer exist for that warehouse management organization data, but the other organization data for the material will exist). It's depend on where you are going to set the deletion flag for the material in MM06 before Archiving/Deletion with MM71
Regards Vassko!

Delete the warehouse management view archive the materials before deleting

Hi All,
I have requirement like this where I need to delete the warehouse management view from about 40k records
also need to archive the materials in order for the views to truly be deleted, instead of just marked for deletion.
Could you please help me in proceeding with this.
Thanks,
Reddy

Hi,
in this way which I described you will delete the warehouse managment view for the material ( after that your material will no longer exist for that warehouse management organization data, but the other organization data for the material will exist). It's depend on where you are going to set the deletion flag for the material in MM06 before Archiving/Deletion with MM71
Regards Vassko!

Material Master Data purchasing view

Hi, All,
I have question on material master data purchasing view. There are 2 indicators.
One is 'automatical purchase order', what effect if I tick this box? Another is 'Source List', what effect if I tick this box?
Thanks for your answer in advance

Defines that purchase orders are generated automatically when purchase requsisitions are converted into purchase orders.
Use
If this indicator is flagged, the system does not display the purchase orders on the screen before they are saved.
Dependencies
In the master record for the vendor with whom the material is ordered, the field "Automatic purchase order" must be flagged in the control data for the purchasing data.
If the source list is ticked, system expects a source list for the material with a vendor and it will not allow to create PO giving a error message,source not included despite of source list requirement if it is not created.
Regards,

Work scheduling view and warehouse management view

Can any one explain what is Work scheduling view and where it need to be extended fro raw material or Finished or Semi finished

Hi,
Work schedule is purl related to PP where as warehouse management related to warehouse
where it need to be extended fro raw material or Finished or Semi finishe
It can be for three
check following link also
[work schedule|http://www.sap-img.com/production/work-scheduling-view-in-material-master.htm]
Regards
Kailas Ugale

Problem in material master LSMW - Classification view

Hello all,
I have created LSMW for material master upload with standard input method. Material is getting created thr's this, but 'classification view' is not getting created only for some material groups. Functional consultant is saying that there is no such configuration exists in system regarding material groups.
Plz advice how to resolve this?.
Regards,
Aparna Gaikwad

I giveup now
You close my all doors by saying "All views r needed".
Now i would suggest if any help you can take
Expert Forums » SAP Solutions » ERP - Logistics Materials Management (MM)
There definatly you would be able to find some alternate solution.
Cheers
Amit.

Material Master, Warehouse mgmt2 tab, Issue in change in LE quantity

In the Material Master, in Warehouse mgmt2 tab, When I have tried to change the LE quantity in Palletization data section.
to 1763.68 lbs, it's not take 1763.68, but taking 1763.681.
Whenever I put the data with 2 decimal point, it take 3'rd digit also which is 1.
So a small difference of 0.001 is occuring.
How can we rectified this issue ?

Ya, Base unit is KG and WM unit is LB.
But in my issue, I am entering the quantity in the unit of LB.
i.e. if I am entering 1763.92 then it is in LB .
So I think conversion factor should not play any role in this case.

Reg:Material Master Foriegn Trade view Update

Hai All,
I need to update the Material Master (mm02) transaction
In that foriegn trade view i need to update .
Is there any BAPI or Function module or any standard program is there?
Could you please help me out?
I need to update the Custon Tariff Prefe. In Foriegn trade view.
Please help me out.
Thanks & Regards,
S.Chaitanya.

Hi Chaitanya,
There is no separate function module tro only change the foreign trade information but the generic function module is
BAPI_MATERIAL_SAVEDATA
Regards,
Ravi

MM01 Create New Material Master without Basic view

Hi,
The SAP system allow us to create a new material master Purchasing View only (without Basic views). We execute T-code MM01, select Purchasing view only, enter the purchasing view data and save. Material master created with only the Purchasing view.
We want to control whereby Basic view must be created first before any plant/organisation material views (Sales, purchasing, Accouting etc) can be created. That means user cannot create Purchasing view ONLY if the Basic views is not created, can this be done??
best regards,

Hi,
For most of the standard SAP material types the basic data 1 view is configured as mandatory, but that can be turned off in the configuration. The first place I would look would be in SPRO under 'Logistics - General -> Material Master -> Basic Settings -> Material Types -> Define Attributes of material types'. In this transaction, highlight the material type being used and click on the magnifying glass. The section 'User departments' shows what views can be created for a material. You need to check 'Basic Data' is selected here.
If that isn't the problem, then I would suggest that you look at the screen sequence and also the field selection configuration for the material type, which you can find under 'Logistics - General -> Material Master -> Configuring the Material Master'. This configuration dictates what fields are shown on the material master and the status of each field, i.e. whether it is mandatory or not.

Material master - batch management not consistence with mara-xchpf

Dear Experts:
We have a problem that the user created a new material and only created Basic Data/Accounting/Costing View, inside these views there is no "check field" about "Batch management" but in table both of MARA / MARC the field XCHPF has value 'X' (checked).
in our system, there are 2 material no. has the same situation.
My question is why and how the field "batch management" has been checked and how can we remove it if there is no stocks, no open Doc and no any other transaction??
Thanks a lot.
SAP ECC 6.0

Hi Jürgen L.
Thanks again.
The problem is that we can't change the field "batch management", the material no. we have DOES NOT have Batch No., NO stock, the only docments we have are one PR and one PO, and all of them has the status deleted.
And I had tried to created a new material no. in our QAS, what we did to this new material no. is:
1. Use MM01 to created "Basic data 1" view refer to a "batch management" Material no. - Only Basic data 1 view and click save, nothing else.
2. Use MM01 again to create "General Plant data/Storage 1" view, but the field "Batch Management" is checked and unchangeable, I think this is not reasonable, and I dont know is there any other way I can change "batch management".
thanks.
Last update :
The issue is resolved:
2. Use MM01 again to create "General Plant data/Storage 1" view ,( the field "Batch Management" is checked and unchangeable), save material no.
3. Use MM02 to change "Batch management", now the field "batch management" is changeable.
Thanks you all
Edited by: KMateo on Apr 22, 2010 9:49 AM
Edited by: KMateo on Apr 26, 2010 5:59 AM

Change/ removal of Unit of Issue in Material master Work scheduling view

Hi,
Is there a way to remove Unit of Issue from Work scheduling view? it is giving error message as "this is being used in BOM". Even if we put deletion indicator also it is showing same error message.
Regards,
R. Srinivasan

Do a CS15 for the material in question and make sure you go in the BOM and select the material and click on delete/remove you can then do this.
I have tested it and it works.
Regards
Adeel

Can not see warehouse management data screens for material while extending.

I want to extend material for warehouse managment views.I can not see these views for the material in MM01.Looks like this is some thing to do with material type configuration.Can some one assist me how to do this?

1)Check whether the material exist for that plant and storage location which is assigned to warehouse number .
spro->enterprise structure->assignment->logistic execution->assign warehouse number to plant/sloc.
2) Check in OMS2 tcode in the material type setting WM view is selected.

Material master settings -- GR , Bipass PO

Hi,
Certain fields like QA control key i want to change in material master, accordingly certificate type should be asked in MIGO. not based on PO field settings. is it possible.

Hi,
You can specify which certificate type is required in material master Quality Management view and the system will ask during PO whether a certificate is received or not.This is based on material master settings only.The control key should be in such a way that it needs to support certificates.
Regards
Sreenath

Creating Material Master views

Hi Experts,
I am writing a program to upload material master views.
From that program i am getting the file as output and by using RMDATIND program(Direct input program) i am uploading that output file to that program and creates the material when it does not exists and if the material exists it will check the particular view that i want to upload.
In doing this i got one question that, i am checking the field VPSTA in MARA table for the views that are created to that material.
That field contains the values as EDALS.
E for PURCHASING VIEW
D for MRP VIEW
A for WORK SHEDULING VIEW
L for GENERAL PLANT DATA
S for WAREHOUSE MANAGEMENT VIEW
I want to know the characters for the other views also.
Can any one give information for that views.
Thanks,
Kruthik.

Hi,
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
Rgds,
PB

Materia master warehouse management view

Similar Messages

Maybe you are looking for