Materia transfer Procedure for asset  material within the plant

Hi
We need to set the process in SAP for asset material transfer from onle location to another within the plant and also send back defective one back to vendor.
Please suggest the procedure to do the same SAP.
Regards
venkat
Edited by: garapati on Feb 29, 2008 6:35 AM

hi,
clarify that material code is used or not.
if material code is used then use 301 mov type.
regards
points if solved/helpful
Edited by: RAMESH ARORA on Feb 29, 2008 12:04 PM

Similar Messages

  • Create fixed assets from within the transaction for creating the purchase order

    Hello All,
    I have gone through the notes on help.sap.com related to automatic creation of asset master record at the time of creating purchase order.  I am not sure how do we achieve this?
    Link to the notes on help.sap.com
    SAP Library - Asset Accounting (FI-AA)
    Any suggesstions from the expert group is appreciated.
    Thank you,
    Vinay

    Hi Vinay
    I know there is a feature whereby you assign asset classes per material group and then you create assets from within the PO. I never used it though
    Let me tell you one thing or rather ask you. Will you as a finance consultant be willing to let a MM guy create the assets??
    Or will a MM guy be willing to create it?? If you allow them, you should be ready for surprises.
    Honestly, this is a feature not worth exploring unless a FI guy is willing to create the PO. I would suggest the creation of asset masters should be with FI only
    Br. Ajay M

  • Material transfer procedure from Valuated Plant to Non- valuated plant

    Material transfer procedure from valuated plant to Non valuated plant through MIGO - MVT. 303 (Remove from Storage ) & reveiving through MIGO - Mvt. 305 (stock in Place )
    By using above method can we indetify stock of same material in cost centre wise and WBS - Project - code wise in MMBE.

    Hi
    same material but Qty. wise post  in defferent project code (two or three )  and cost centre. but in MMBE we can see only Qty. not project code wise or cost centre wise.
    After few days If we want ot issue mateiral against Prioject then how can we identify the project code.

  • QM for asset material.

    Dear expert,
    How to do QM for asset material?.Actually we have a z report and accepted quantity is zero after QM.Is there any customization for it?
    Regards
    Tanmoy_mm

    HI
    For MM reports
    You can create one material code Non Valuated  for asset ,
    and use it in Purchase order , along with asset master, as it is Non Valuated so no accounting Entries are there.
    Vipin

  • What is the procedure for storing iPads over the summer

    What is the procedure for storing iPads over the summer

    Lock them up in a cart. Power off completely. If you don't have enough iPad carts any secure area will do - see environmental requirements below.  You will just have to recharge each one next fall as they will not retain enough power to turn back on.
    Operating temperature: 32° to 95° F (0° to 35° C)
    Nonoperating temperature: -4° to 113° F (-20° to 45° C)
    Relative humidity: 5% to 95% noncondensing
    Maximum operating altitude: 10,000 feet (3000 m)

  • Release procedure for Purch Org at each plant level different release Proce

    Hi gurus,
    1.What is the difference b/w Centralized purchasing organization and Decentralized organization?
    2.How to maintain the Release procedure for Purch Org at each plant level different release Procedure or Release codes?
    Regards,
    Hariprasad

    Hi,
    The solution for your second question is as follows.
    1. go to spro- material managment -purchasing -POrelease prcedure for po--- define release procedure.
    2.  Create release grp, release codes & release indicators. Assign release codes to release grp.
    3. Create release strategies.In the release strategies in classification define one of the characteristics as purchase organzation  & the other as plant and define the values. You may put other parameters as per your requirements.
    Regards
    MG

  • Creating Transfer Order for a Material document

    Hi,
    I am transferring the Unrestricted stock from one material to another material through Movement type 309.
    I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storage types or storage bins, then I need to perform LT06. Instead of doing BDC recording I am using L_TO_CREATE_MULTIPLE function module for creating the TO. I am passing all the necessary values to this FM. TO is getting created but the Material document is not reflecting in that TO.
    As per the configuration, movement type 309 will create the posting change only not the Transfer Requirement.
    Does anybody have encountered the same problem?. If so please let me know how you have resolved the issue.
    Regards,
    Kishore.

    Hello Kirankumar,
    It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
    Now when you create Transfer order for material document at that time you can assign SU number externally.
    Hope this helps.
    regards,
    Arif Mansuri

  • Pricing Procedure for Imported Material purchased from local vendor

    Dear SAP Experts,
    I have a scenario, where the Imported material is purchased from a local vendor.
    The local vendor passes on all the customs duty, CVD and all the related duties to the customer (us).
    All the duties including CVD in the form of Excise duty etc. have to be inventorized.
    How to map this in SAP?
    Thanks In Advance.
    Regards,
    Muthuraman.K

    HI,
    I have given the pricing procedure for TAXINN
    100     0     BASB     Base Amount                                         362
    110     0          Calculated Call     100       
    120     0          Sub total               
    250     0     JSRT     Service tax set off     100                                      VS7
    251     0     JEC3     A/P Ecs for Serv tax     250                                      VS8
    253     0     JES3     A/P SE cess serv tax     250                                      VSE
    258     0          Total Sevice Tax     250     253
    260     0     JSVD     IN:Service tax debit     250                                      ESE
    560     0     JMOP     IN: BED setoff %     120             X                         VS1
    561     0     JMOQ     IN: BED setoff Qty     120                                      JI2
    564     0     JSOP     IN: SED setoff %     120                                      VS1
    565     0     JSOQ     IN: SED setoff Qty     120                                      JI2
    570     0     JMIP     IN: BED inventory %     120             X
    571     0     JMIQ     IN: BED inventory Qt     120                                      NVV
    574     0     JSIP     IN SED inventory %     120                                      NVV
    575     0     JSIQ     IN SED inventory Qty     120
    578     0     JMX1     IN: A/P BED setoff     560     561
    580     0     JSX1     IN: A/P SED setoff     564     565
    581     0     JMX2     IN: A/P BED inventor     570     571
    583     0     JSX2     IN: A/P SED inventor     574     575
    584     0          Total excise duty setoff     578     580
    585     0          Total excise duty Inventory     581     583
    586     0          Total Excise Duty W/O ECess     584     585
    587     0     JECP     A/P Ecess set off %     584                                      VS2
    588     0     JECI     ECS inventory %     585                                      NVV
    589     0     JSEP     IN:A/P SEcess setoff     584                                      JI6
    590     0     JSEI     IN:A/P SEcess inv     585       
    591     0          Price     120     120
    600     0     JAOQ     IN: AED setoff Qty     120                                      VS2
    601     0     JAOP     IN: AED setoff %     120                                      VS2
    605     0     JAIQ     IN AED inventory Qty     120                                      NVV
    606     0     JAIP     IN AED inventory %     120                                      NVV
    U have to setup ur taxprocedure like this.In this the acct key is the main.IN OBCN ucreate the acct key & give them as non cenvatable.Then assign this acct key against the condition type in the TAXIIN.
    Then in FV11 create the condition records for the cond type.For the cond type the access sequence should be JTAX

  • Service PO for Asset material

    Hi
    I want to send an Asset material for service through service PO to a vendor for certain sort of service, after finishing the process at vendor , the same material should go to other plant in the same company but not to the issued plant. How can I do this.What is the business process to follow.
    Regards
    venkat
    Edited by: garapati on Mar 12, 2008 10:53 AM

    Hi,
    One thing you can do is, change delivery address at item level in PO.
    Hope I'm getting you right.
    Regards,
    Piyush

  • Error during Material Docuemnt cancellation for Asset

    Hi
    When I am trying to cancell  material receipt for asset using 122 movt type I am encountering the follwoing error
    No conversion Found for LOT to
    Message No. 8I171
    The UOM does not exist
    The UOM conversion does not exist in the material master for the material & UOM entered.
    I  have used a PO with acct assignment category A and Material code for this Asset procurement. LOT is defined in base Units of measurement already. In material master i have nothing entered in the additional data tab for alternate units and I have not used anything else as Ordering unit in purchasing view also. That is to say every where LOT is used. How to solve  this issue.
    Regards

    hi
    goto J1ID and here check the units given for chat id , remove it
    aslo if ur uing TAXINJ process then check the units in EXCISE TAX RATE
    regards
    kunal

  • Release procedure for ASSET

    Hi SAP guru
    I am having the requirement for release procedure as follows
    Purchase order with  Asset (Item category)   - Value  Up to 50,000/-  will be approved by GM
                                  Asset (Item category)   - Value  more than 50,000/-  will be approved by Chairman.
    Purchase order other than ASSET
                                                        Value  Up to 100,000/-  will be approved by GM
                                                        more than 100,000/-  will be approved by  Chairman.
    I checked in CEKKO, the field KNTTP - Account Assignment Category component is not available.
    Could you please tell me how to solve this issue?
    Good suggestion will be rewarded with full points.
    Thanks in advance
    Anand

    Hello Anand:
    The release strategy for PO only contain fields on the purchase order header (EKKO) and the account assignment is at item level (EKPO), however you can add the account assignment as customer field on structure CEKKO (CEKKOZZ structure) and fill the information on this field with the user exit M06E0004 (transactions SMOD, CMOD)
    Keep in mind that the CEKKO structure has the value of all the purchase order (CEKKO-GNETW), not item by item. It means that you could not check on the release strategy the value of all the assets included in the purchase order.
    Additionally check if there are cases in your installation where a purchase orders could contain several items for more that one account assignment.
    I hope this help, if you have any question please let me know it.
    Best regards,
    Jose Luis

  • Material Master views for every material type

    HI Expertis,
    I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
    As an example, for the material type "FGTR" what should be the required views to create material master?
    From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
    Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
    these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
    I would be gratefully thank u, if u can guided me on this matter.
    Thanx & Regards,
    Rashika.

    Hi,
    You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T   .From this tables ,for each material type, you get all views.
    User department Maintenance status
    Work scheduling A
    Accounting B
    Classification C
    MRP D
    Purchasing E
    Production resources/tools F
    Costing G
    Basic data K
    Storage L
    Forecasting P
    Quality management Q
    Warehouse management S
    Sales V
    Plant stocks X
    Storage location stocks Z
    hopw this will help you.
    With Regards,
    Jaheer

  • Material item number for Settlement Material Cost

    Dear All,
    My client want to see the line items for settle Material i.e. he needs materials item number and qty for settled material cost in perticular project / WBS.
    Thanks and Regards,
    Atul R. Rajmane

    Dear Nitin,
    Thanks for Replay.
    CJI3 report give actual cost line item. For settle values its will show cost but not material number. My Client needs the material number and qty for settled value of material cost.
    Specifically, he need an WIP report which shown material number and qty berak for WIP amount of a specfic project/wbs.
    Thanks and Regards,
    Atul R. Rajmane

  • Material Search Help for VA01 - Material by Plant

    Hi Experts,
    I want to know how to find out the search help for that material in that tcode. Please tell me   in detail how to proceed with this and where to go with the modifications or enhancement.
    I am not familiar with user exits, so please help me.
    Regards,
    Bhaskar.

    Hi,
    you don't need any exit / badi.
    Go in VA02, in material number go in technical information : F1 ; F9
    You will show there is no search-help link to the field. So the search-help is taken from the data element.
    Go in SE11 and show the data element MATNR.
    In the thirth tab you will find the search-help link : S_MAT1.
    Go in SE11 and show the search help S_MAT1 (each time you could double click instead of reopen SE11).
    This is a group search, that means, it contains many search help.
    Copy a simple search help, modify as you would like.
    Add your own search help in the S_MAT1, and don't forget to link fields (parameters).
    You don't need any object key or user-exit.
    You will affect all the screen of SAP using this search-help S_MAT1.
    Regards
    Frédéric

  • SSO for various applications within the same portal

    Is it possible to implement SSO at the application level in an EP 7.0 environment?
    Ex:  One Portal with ESS and BI Functionality (BI is connected to the BI backend, ESS is connected to the ECC backend, but all of it exists within the same portal instance) in which the BI Explorer would rely on SSO, while the ESS would require a logon to the portal.  The initial page of the portal would not be a logon screen, but rather a menu screen
    Does this functionality exist?

    For our purposes, ESS would have to be authenticated (perferably through Active Directory), while BI Explorer wouldn't require "visible" authentication, BUT the question would be, could all of this exist on the same portal..
    I agree that it certainly wouldn't be user friendly to ask users to logon (using AD l/p) for certain parts but not others.  I think the solution would simply to have 2 portal instances (ESS/ECC = Logon/Password,  BI Portal = SSO), and to federate the BI to the ECC Portal. That way, if someone wanted to work in BI and only BI, they could go without logging on, but if they wanted to go to the ESS Portal they would have to logon BUT would be able to use both ESS and BI.
    This all stems from an effort to eliminate the neccessity of having to logon to a portal (for a small group of managers), but still maintaining a level of security for ALL users in regards to employee self-service

Maybe you are looking for

  • Excise invoice does not excist

    Dear SAP Gurus, While depot to depot stock transfer process @ the time for MIGO error came that EXcise invoice does not excist for suppying plant.Is we miss any configuration. With Regards Mukul Kumar

  • Array

    i get the following result when i try to run my program below. any help or suggestion will be appreciated. thanks again../Paul Can't make static reference to method boolean isOperator Can't make static reference to method boolean isInteger here's the

  • Order unit of material

    Hi Gurus, We want to change the material to put an order unit, but we have an exsiting PO using the base unit of this material and when we edit the material put an order unit the message come out "This order unit has been used already" I can't save w

  • V3xx calendar sync not supported in Leopard

    With Tiger, I had found a sync plugin that worked for the Motorola V3xx with the exception that calendar synchronization worked only for copying items from the phone to iCal, but not from iCal to the phone. I was looking forward to full functionality

  • Cannot resize project assets window

    I am unable to see the files in project assets window. The handle in the lower right corner shows up but when i try to drag the handle nothing happens.