Material 02003 has been excluded

Hi
I amfacing any issue when ia m creating quotation.
While putting Material, error message is coming that "Material 0200-07443 has been excluded"
Whay it is coming?
What setting i need to check and modify for exclusion condition in system & resolve this issue
Vicky

Hi,
It means listing/exclusion is activated and the material is in exclusion list. In OV04 we activate/deactivate Listing/exclusion.
have you checked this as suggested above by raja
pls deactive the listing and exclusion procedure for QT(quotation)and see whether you can able to create quotation for that particular material
regards
senya
Edited by: senya_1111 on Aug 3, 2009 9:18 AM

Similar Messages

Standard report to show Raw Material which has been consume

Hi,
My plant controller would like to know for particular of raw material has been consume by which style number for particular period of time. Example:- Material A has been consume by style number A - 6 pc, B - 4 pc and C - 2 pc
Do SAP has standard report to display all this information.
Pls. help.

Hi,
Use t-code COOIS and follow below activities -
List - Documented goods movement ---> production order ---> plant ---> Execute
All the components will appear with movement type 261 and 101.
select only 261 movement type materials.
These are your RAW material which has been consumed against subjected production order.
Thanks,
Rampreet Jaiswal

Time Machine has been excluding items for hours... and counting!

I have been using time capsule for several years now. But today I brought a new hard drive to use with Time Machine. It's a Western Digital My Book Network drive.
Plugged it in selected the new disk and started to back up. For hours now it has been 'Excluding items..'. It has apparently excluded over 5 million items! Why is it doing this?
I've checked the list of files to exclude and it's just set to exclude the desktop and the Downloads folder.
I don't understand why it has been excluding items so long. Nothing had been copied to the external disk yet. If anyone could help me I'd be much apreciative!
Thanks, George!

georgeShawkins wrote:
Well now I have this new hard drive
You may avoid some confusion and/or problems by not calling it that. It's a +Network Attached Storage+ (NAS) device, or +network drive.+ Yes, it contains a hard drive, but OSX handles it very differently for many purposes. You've already seen that you can't format it via Disk Utility, for example.
I'd rather not have erase the whole disk and put the wanted data back onto it.
If you can copy that 50GB elsewhere temporarily, erase the drive, then copy it back, that may be much faster and easier than deleting the Backups.backupdb folder. It contains at least several hundred thousand, perhaps over a million items, that OSX must delete one at a time. It may also have permissions or other problems.
Erasing, however, takes only a few moments.
This is why we recommend giving Time Machine its own, exclusive space. See #3 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
Are you putting other things on the network drive? If so, you may have problems there, too, as Time Machine will eventually use all the empty space available to it.
Those backups will be inside a rather odd container called a +sparse bundle.+ If you're really on Leopard, as per your signature, you can limit the maximum size of the sparse bundle, per #A8 of Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
But since you've posted in the +Snow Leopard+ Time Machine forum, if you're on 10.6.3 or later, that won't "stick," so you may want to see if you can partition the network drive via WD's software (another thing you can't do on a network drive via +Disk Utility,+ unfortunately).

How can I know the new Material Master has been created?

Does anyone have been tried about how to trigger the new Material Master has been created at a time interaval(maybe an hour or a day)?
I want to transfer the new Material Master within a given period from SAP R/3 4.6C to .NET Application through standard BAPI or RFC and .NET Connector 2.0. How can I do?
Any suggestion is wellcome. Thank You.

Thank you Jiri Ehrlich for answering my question..
I choose the third way as you suggest..
".. 3) Create your own ABAP function to export whole Material Master, call this function from your .NET application and do synchronizing on .NET side (so your .NET application will be RFC client).."
I've tried RFC that retrieve Material Detail by using BAPI_MATERIAL_GETLIST. It works fine but if I want to retrive the new Material or modified within a given period of time(for example 15 or 30 minutes). How I can do? Is there any standard BAPI or RFC to call from .NET or I have to write new RFC.
I have little background of ABAP so help me please. If I have to create new RFC, is there any ABAP Function to call or which table I can retrive those information.
Anyone can suggest?? Thanks in advance

Return Delivery when the material document has been archived

Hi There,
We have a situation in which we need to return some consignment material to a vendor because we don't need it anymore. We have 74 units in unrestricted stock. The thing is that the PO's material documents have been archived. This causes we can't do the return delivery using MIGO transaction.
Could someone tell me what options do I have?
Thanks for your help.
Luis

Hi,
You can create a return purchase order to do that, just flag the checkbox "Return" in the PO item line.
Good luck
Tao

Material has been excluded.

Hi All,
I am getting an error while entering the material in the sales order.
I have checked in the Listing/Exclusion also.But still the error is coming as below.
Kindly help how to go about this.
Thanks,
Pavan.

Hi Jithendra,
Thanks for your prompt reply.Issue is in Production system and we need to create new Transport Request to remove the Exclusion procedure.
We will try the same once we spoke to the business user.
Thanks,
Pavan.

HT3625 My Macbook Air does not have this "Use audio for:" option, as it has been excluded from Airs for whatever reason. How do I change my audio output to input without this?

If I have to buy an audio-usb converter let me know.
Although if this is an option exclusive to Pros and I do, then this is a little ridiculous Mr. Ghost of Steve Jobs.
Especially considering how Airs don't have their own section here on the forums
Thank you for whoever responds! All the idiot "how to" links on Google have me a little frustrated

Nevermind, posted this in Air section
It didn't give me that option initially.

Extending a BOM that has been created and then deleted

Hello!
I have a BOM for a material that has been extended to several plants already.
This BOM should be the same for all plants, so I maintain through extenstion in CS07 for all other plants.
The problem is that someone created that same BOM for a new plant manually and did NOT use CS07 to extend it.
I deleted the BOM they created manually, hoping that I could recreate it using CS07 to extend it.
It won't let me. I get the error "BOM already exists for this material/plant/usage" when I try to extend it now for the new plant, even though I have deleted the BOM I am trying to re-create.
Is there any way that I can create the BOM for this new plant using an extension now? Or is this not possible in any way?
Thank you very much,
Stefani

Yay! Our Global Business Team did figure out how to fix this issue (thank you Julia Fox):
1.) We used CS02 to go into the BOM we wanted to delete and extend with the others.
We found the date it was first created and entered that date in "Valid From" field.
We left the Change Number blank.
2.) In CS02, we hit the green check icon, selected "Material BOM" and then "Delete".
This cleared out the change history that we did not clear out before when we used a change number to delete this BOM previously. That change history was what was preventing the extension of the plant's BOM from another after we deleted it with a change number.
3.) Then we were able to go into CS07 and extend the BOM to match the other BOMs, since the change history was deleted.
Thank you again Mariano for your help! We couldn't use Support Note #19006 you found because the BOM could still be displayed (because we deleted it with a change number).

Creating a Materialized View Log After the Data has been instered

Hi,
I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
The way the replication is intended to work is:
Oracle> Data inserted into table
Oracle> writes the vector data to the MVL
Script> Monitors the MVL and can see the changes being made to the Oracle Table
Script> Updates MySQL with the data and removes the rows from the MVL
MySQL is then used with other unix systems
Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

Activity 0010 has been assigned material components - Deletion not allowed

HI friends,
Even after deleting the material from the activity, the system is giving the following error message
Activity 0010 has been assigned material components - Deletion not allowed
The status of the activity is REL.
One purchase order already created for this WBS element.
The material found deleted from the activity but why it is giving the same message.
Activity 0010 has been assigned material components - Deletion not allowed
Edited by: M.Alagesan on Sep 13, 2010 1:15 PM

Is that material already consumed?
Generally when you try to delete the operation, it also deletes the dependencies of the activity, i.e., it deletes the components associated to that activity, if it is not issued to the order.
Check the details in your system.
Praveen

Material goes straight into 'unrestricted' even after QI has been setup

hi SAP gurus,
QI has been setup for this material, in the PO and also MIGO goods receipt, stock type has been defaulted to "QI" as well.
however after the GR has been posted and i checked MMBE, the stock went straight to "unrestriced".
how to i know if there's any user exit or setup in the QM that causes this?
thank you very much.

Hi,
Were you able to get an inspection lot for this GR? Is the Q-info record maintained for the material?
This could be another reason besides the 'Post to Inspection stock' activation.
ntn

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

Adobe Reader XI 11.0.07: font size in comments has been reduced to about 5pt with this update

Win7 x64/sp1 with many updates:
For the last few years, I have experienced major font problems with the comments, such as attempting to make a change in a font style causing Reader to lock up for about 3 or 4 minutes.
I allowed the update to 11.0.07 this am and the pdf I was working on, at length yesterday, now has the font size in the numerous comments I created reduced to about 5 pt. I know: that small isn't possible, but that's about what it looks like.
I believe that Adobe's quality control on Reader has been grossly lacking in the comments area. It has been suggested to me that I switch to PDF-XChange.
I will seriously consider it, because, as I open up pdfs from years past that I need to use for the material I'm working on, I see that the font size in all of those comments has been reduced drastically as well.
The only remedy that I can find is to open each comment individually and "Clear formatting."
That will amount to an enormous waste of time.
Please hire someone who is interested in quality control.

Hi Rohit Sh,,
Thanks for your answer. I have encountered a similar problem. While the font size of the comment created before the update remains unchanged, that of the comment created after the update reduce to about 5pt.
Then I tried to increase the Font Size from "Commenting" section under Edit->Preferences, the font size of both the old comments and new comments get increased. So, for example, suppose the desired font size is 10pt but the new comment look like 5pt, then when I update its value into 10pt again, nothing happened; when I change its value into 15pt, the old comment become 15pt and the new comment look like around 7-8pt; after this, if I change its value back to 10pt, the old comment would become 10pt as desired but the new comment now would become even smaller than 5pt. In conclusion, I can never make all comment have the consistent font sizes by changing the Font Size from "Commenting" section under Edit->Preferences, as it worked in the earlier version.
Please fix this. Thank you very much.

My iphone has been hacked?

My touch screen started malfunctioning about a week ago. Two days before, when I was viewing a photo on Facebook, the screen froze again. I then closed the Facebook apps and went back to the home screen. But the touch screen did not allow me to control it. I then turned off the screen and entered the lock screen. Just when the lock screen appears, password buttons were being pressed automatically as if it was entering some passwords. I had not touched the screen at all. It did not enter the correct button and when it failed, it tried again. I looked at the screen and noted that it tried several times of wrong input of the password, I forced off the phone and restarted it. Everything resumed normal and I thought it was just normal malfunctioning.
Yesterday morning, when I was reading Yahoo News on the iphone, the apps hanged. I closed the apps and intended to re-open it. But before I could attempt to press the apps button, the phone started to function by itself. The pull down menu was being dragged down, and scrolled through the list of emails and events. It pressed open my email list, and clicked onto one of my emails. The email it opened showed a hyperlink of a community which I was a member of, and required me to input a password. When it entered the page of password input, it stopped. I did not enter any p/w and close the mail apps. But once I closed the mail apps, the pull down menu was dragged down again, and the list was scrolled again, another email with hyperlink and p/w entry was required was opened. It stopped again when a password was prompt. This series happened several times in the roll. For reason of the pattern, and the password entry prompt, I was very sure that somebody was in control of my phone, wishing to get some of my passwords. I switched off the phone and restart. Everything seemed to have resumed normal. But after that, I removed a few newly installed apps.
This morning, some of my friends called me. They asked me why I did not reply to their WeChat messages. It appeared that I lost all incoming messages from last night onwards, except those in a group chat. I tested with several friends and it seemed that the problem is on me. The more scary thing is, I noted from one of my group chat that I typed a message "testing" to the group. The fact is, I did not type the message and in fact, I was on the phone at the material time.
Can some of the experts here please help me and let me know what's happening and what I should do? Will merely restore to factory setting helps the situation? I closed all cellular connection on my iphone now to protect all data inside.
PS Mine is a iPhone 5. I had not JB my phone. My phone was purchased direct from an authorised dealer accompanying a phone package plan. It is a genuine Apply Original product at its first release.

If the phone has been in your possession since you set it up and you did not hack or jailbreak it then it is not hacked.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Or take the phone to an apple store to have it checked out.

How can I see what, when and how much has been downloaded from the net?

I use a satellite internet service which limits me to only 200Mb of downloads in a 24 hr period. Should I go over, I am "locked out" of my internet service for the next 24 hr period. Lately I have been locked out without thinking I have downloaded anything. I am wondering if there is a place on the computer I can look to give me an idea what has been downloaded and when? I did change the Apple software update to not "automatically update important files" but I am wondering are there any other programs or anything the system may be downloading automatically without me knowing and what can be done to rectify it?
Thanks

Thanks for the thoughts. Here is some more for consideration. I was locked out yesterday and when I finally got out of "lock up" today, I went to my satellite internet provider's site to see how much and when it was downloaded. I booted my machine at about 10 AM yesterday and according to their site between 10 and 11 AM I downloaded 188MB of data. Then from 11 AM to Noon they said I downloaded another 28MB which then resulted in my being locked out of the internet until noon today. During that time I was on the net, I initiated no downloading from any site nor did I have any video streaming. What is frustrating is I have no idea what is being downloaded or how much. Most other days of the week it appears that downloaded material is 75Mb or less and I can remember generating the downloads.Looking at their site, the "downloading" of mystery material begins quickly after booting the computer which leads me to believe, as Kappy was saying, this is likely something like Apple Software updater or such set to "Download on Startup". I guess I'm not quite sure how to check to see what is set to "Download on Startup" and how to make sure nothing downloads at startup unless approved by me. Any thoughts?

Material 02003 has been excluded

Similar Messages

Maybe you are looking for