Material appearing in the another Storage Bin
Hi,
I have maintanined storage bin in material master (view:warehouse managment2) as "OPEN" for my material 78.59.32.1551.
After doing 105(MIGO),for my material 78.59.32.1551,when I checked stock by using tcode LS24,the material is showing in the another storage bin:04-DR-01 instead of "OPEN".
It should appear in the "OPEN". Am I right? If no ,please correct me .
Any solution???
With Regards,
Jaheer.
Uncheck negative stock for the storage type you are picking from. IMG - LE- WM-Master Data-Define Stg Type uncheck 'Allow Negative Stock'.
Similar Messages
-
Picking from another storage bin
During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.Hi,
With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
Thanks
Vinod. -
Not Printing the source storage bin in the layout
Hi Gurus
As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
Please help me,
Thanks in advance,sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working -
Transport the created Storage Bin Automatic from develop to quality LS10
Hello,
My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
Cheers,
MartaI could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
Thank you very much. -
Stock transfer from storage bin to another storage bin.
Hi,
i would like to know the method to be followed in order to transfer the materials from one storage bin to another within the warehouse and also within a storage type.
Also i would like to know how to transfer the material from one storage type to another.As everyone has mentioned above, to manually create TOs to transfer stock, use LT01 w/ movement type 999. However, this method is limited to a single material at a time.
Depending on your scenario, you may want to set up storage type replenishment - where you regularly restock a smaller warehouse location from a larger one:
Example: Small warehouse section with customer counter service & larger warehouse where bulk items and bulk quantities are stored
Not sure if this is your scenario or not, but here goes:
Requirement is to use the "Large, small" picking strategy for the receiving storage type.
Material master records in that storage type need minimum and control quantities maintained on the WH2 tab
Run (or schedule) program RLLNACH1 to automatically create transfer requirements to transfer stock from bulk storage to the smaller storage type - and then, depending on your config, either stop as TR or automatically post os TOs.
Good luck -
-ve stock in the pick storage bin
Hi All,
Here is the example that explains the problem we are having: If the outbound delivery has a quantity of 300, when processed using VL06P the TO is being created for 300 where as the actual available quantity in the pick bin is only 200. This is resulting in -ve availability stock at the pick storage type when we are checking in transaction LS26
What is required is create the TO for only the quantity that is available at the pick bin and avoid u2013ve stock at the pick storage type level
Can someone suggest what config is missing?
Thank youUncheck negative stock for the storage type you are picking from. IMG - LE- WM-Master Data-Define Stg Type uncheck 'Allow Negative Stock'.
-
WM::system is not placing the stock another storage bin
hi friends
system is not check fill the stock to another bin ..system is placing the stock in same bin...what are the cofiguration required?
with regards
dinesh
Edited by: code acess on Jun 15, 2011 10:47 AM
Edited by: code acess on Jun 15, 2011 10:48 AMhi SAP FC
Iam using putaway strategy is "L" ..storage is determing in the system ..every thing is working fine except placing stock to another bin
with regards
dinesh
Edited by: code acess on Jun 15, 2011 11:18 AM -
Material count by Storage BIN wise with WM impelementation
Hello,
Users are counting the materials storage-bin wise.
The issue is, there is no WM module, ONLY MM module is implemented.
Whether its possible to design a solution that will allow creation of Physical Inventory documents and performing the same storage bin-wise.
Since its not possible in standard , then whether the enhancement/development to be done or how it can be addressed?
Regards
Sapman manif any material is just stored in one bin, then you can enter this bin in the storage location view of material master.
MI31 selection screen allows you to create inventory documents for certain bins only.
Further you can sort the items in the inventory document by bin -
Storage bin - stock in the past
Hi gurus,
I just would like to know the material, batch and stock quantity I had in determinated storage bin, in the past, for example in May 31th 2008. The system can get me that information ?!
Thank you in advance,
MaiconHi,
As per my knowledge there's no such standard SAP transaction. In IM you have MB5B to get stock level on a particular day, but it has no counterpart in WM.
You can use your current stock level (e.g. LX02) for that bin and use LT22 to get all WM-material movements where the source / destination bin is fthe bin which is in question (download the reports in excel > work it up).
Or you can develop an own report...
BR
Csaba
Edited by: Csaba Szommer on Jun 19, 2008 3:59 PM -
Multiple storage bin for single material
Hi,
We wanted to assign multiple storage bins in the material master as the material is stored in mutilple storage bin in the same storage location. We are not using WM.
We want to resolve the issue without implementing WM.
Please advice where and how do we maintain the same.
In plant data / stor 1 view there is a provision for maintaining only one storage bin.
Thanks,
Reddyit is not possible without WM.
As workaround :
You either create for each storage bin a storage location,
or
you active batch management and let the batch work as bin. -
Copy of Storage bin while creating Material master
Hi,
When I am creating a material master by coping a existing Material Master (which has WM view and Storage bin maintained), system does not copy the same Storage bin to the material which is getting created
All the informations are copied except the Storage bin,
We need this for some business reason
Is this possibleHi,
We are creating the Material master copying exisiting material for Plant --> Warehouse --> Storage type -
Is it possible to Extend the Storage Bin Length from 10 Char to 25 Char
Dear Experts,
We have a Requirement for Extending the Storage Bin Length from 10 Character to 25 Character.
Question 1:
Is it possible to Extend or Not?
Question 2:
Even if we extend what will be Impact on the Current Storage Bin Numbers used now.
Thanks for your support in Advance.No, you can't change length for storage bin field in standard and also it is not suggestable to client. If client forcing on requirement, You can suggest like below.
create one more field for EXT.storage bin by using enhancement and do one customized report for show as , storage bin number+EXT.storage bin = actual storage bin.
For only client reference you do this report and in standard reports it will not show like this else tell to client ---> it is not possible, because it is replicating and using at different programmes. -
Change of storage bin while cancellation of production order.
Hi Gurus,
The problem is while confirming the order the stock for that order is consuming from one storage bin (say 1ECMEL) , but when I cancel the same production order the same stock was returning to another storage bin (say 1MD01A) instead of the 1ECMEL from which it is consumed.
We want to re-move the stock after cancellation of production order to the same storage bin that from which the stock was consumed during the confirmation.
Please advise...
Thank you.
Naveen.AHi,
Please check the material master (mm02) in that if u have maintain default storage location in purchasing view for raw materail and workscheduling viewe for fert system will consider that as default storage bin at the time of confirmation and also for cancelation.
Please try with this.
Regards,
Nilesh -
T.code for viewing stock at storage bin
Hi all,
What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
Regards,
ShailendraHi,
Following are the T-Codes:
LS26 Warehouse stocks per material
LI05 Inventory History for Storage Bin
LX02 Stock List
LX03 Bin Status Report
MB52 List fo warehouse stocks on hand
Regards,
Suresh' D. -
Dear All,
My request is like
in material master i have assigned Storage bin ( WH2 view ) but at the time of creating Transfer Order if user put different storage bin then system accept that at post the material to other storage bin .... ( not puting material in storage bin mentioned in material master)
i want to block the TO if user mention any different storage bin at the time of creating TO
PL. HELP
With best regards
SumanHi
Thanks for your reply
I mention X to Addn to stock but system give same error message
If you have st.pl.str. "Fixed bin", add.to ex.st. must be allowed
MY STORAGE TYPE SETTING ARE AS FOLLOWS
1. OUTAWAY STRATEGY: F
2. STOCK REMOVAL STRATEGY : F
3. TICK ON STOCK REMOVAL REQD CONFIR
4.TICK ON FULL STK RMVL REQD. ACT
5.TICK ON RETURM MATL TO SAME STORAGE BIN
6. TICK ON SUT CHECK ACTIVE
7. TICK ON STORG.SEC.CHECK ACTIVE
please give your valuable suggestion
wuth best regards
Suman
Maybe you are looking for
-
'Before' and 'after' screenshots
I published my site to a folder and one of the new pages looks crazy now- text different sizes, colours and out of alignment. As I'd like to know where to begin in correcting this, I've uploaded screenshots to: http://www.flickr.com/photos/greenmusic
-
Hi, Is it possible to download excel file on the server on a JSP page. Kindly advice. Thanks in advance.
-
Hi - I'm using flash catalyst 5.5 and have created a simple photo gallery. When I publish the file to swf I just get a empty white box. The file runs fine from catalyst and the html runs fine from the run local folder, just the swf I have a problem w
-
Logic keeps randomly quitting when I'm mixing or just listening to my project with no consistency. I've tried restarting it, closing all my other apps, and restarting my computer and none of it worked. I'm on Yosemite 10.10 and logic X. The crash rep
-
I have a new web page where the user wants to be able to check off lines on a very extensive list to reconcile them with a customer's report. I'm using a report like this: select DATE_INDEX, EQUIP_ID , DESCRIP, WT, HAUL_BY, FLAG from (