Material(Article) locked after change

Hi All,
When i change any material (Article ) master through Tcode MM42 its getting locked forever. I am not able to edit the same material again, its giving me "The group data for the article 900000004 is locked by XYZ"
This problem is only in specific development client but in Qulaity server its working fine.
Regards,

Hello,
I can not tell you without connecting why it´s not working in both system. I would therefore advice you to open a ticket in the SAP Marketplace, so that someone can have a look at your system.
Best Regards,
Arminda

Similar Messages

I do not know what I should phone is locked after changing the operating system

I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

HT201232 I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I I do not know what I should phone is locked after cha

Send Apple your basic system information.
Apple is still waiting to receive the data. If you have already sent it from your device check again.

Sorry, this is a user to user forum and Apple can not be reached by posting here.
To get your phone unlocked officially, contact the original carrier and ask them to start the unlocking process. They will pass the info on to Apple, if unlocking is an option.
iPhone: About unlocking

Material locked after using IDOC_INPUT_MATMAS

Hi All
I have a program which uses function IDOC_INPUT_MATMAS for creating/changing material. After that it also tries to update "Legal Control" using a BDC on MM02 but then I get message M3 022 (Group data for material xxx locked by xxx). It looks like the function is not unlocking tables MARA and MBEW (I can see this on SM12).
I have already searched over the internet, SDN and services.sap but no luck so far.
Anyone has an idea about what could be wrong?
Best Regards,
Douglas

Hi
I can see that are locks for 4 tables:
MARA
MBEW
MARC
MVKE
Messages can be M3 022 (for MBEW) and M3 897 (for MARC).
Best Regards,
Douglas

How to stop material description changed after changing customer on SO

I have updated material description on a SO. However after changing the Sold-to, the material description refreshed back to original.
Anyone knows how to stop system to change material description back to default?

Hi
In standard SAP when we change sold to party in sale order system redetermine prices and taxes but this is new thing for me that system also redetermines material description. Amitesh Anand I have also chcked this in my system and material description is getting changed after changing the customer.
Field is VBAP-ARKTX and you can ask your ABAPER to write the code in userexit MV45AFZZ and
USEREXIT_PRICING_PREPARE_TKOMP. I have checked this system is calling this exit. Give it a try and update the status.
Thank$

HT5624 How do I update my Apple ID on iPad and iPhone after changing it?

How do I update my Apple ID email address on iPhone and iPad after changing the email but not password. I have verified my new email on iPhone iPad and iMac but settings on all for iCloud still show my old email address. I can't use anything now that needs my Apple ID

Hello there, Chivs86.
From what it sounds like you are wanting to sign out of iCloud with the "old" ID and sign in with the new. The following Knowledge Base article should help you with that issue:
iCloud: Features that work with one account at a time on iOS 5 and OS X Lion or later
http://support.apple.com/kb/TS4020
Specifically:
To change a secondary account to a primary account
iOS 5 or later:
Tap Settings > Mail, Contacts, Calendars.
Delete the secondary account.
Tap the Back button.
Tap iCloud.
Delete the primary account.
Add the secondary account that you want to be your primary account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Windows 7 desktop locks after 10 minutes idle - Policy setting?

Is there a policy setting to lock the desktop after a certain amount of idle time? I can't seem to find one, and searches on the web only seem to uncover lock up issues with software, rather than security policy settings.
Right now our Win 7 desktops lock after 10 minutes of inactivity (set by old IT staffer who is no longer here). This is way too short and we need to change it. However, I can't find where the setting is. The screensaver is disabled and the power settings are set to maximum. The only policy setting that looks like it could be what I'm looking for is "Microsoft network server: Amount of idle time required before suspending session", but that wasn't set to 10. I went and set it to 0 anyway and the desktop still locks after 10 mins.
Can someone point me in the right direction for this setting?
Thanks!

When you leave your computer, it’s best to start a screensaver that can only be turned off with a password.
On the Start menu, click Control
Panel.
Click Personalization, and then click Screen
Saver.
In the Wait box, choose 15 minutes
(or less)
Click On resume, display logon screen, and then click OK.
just try reverse , it may work !!!!!!!!!!!!! :)

Valuation class of material master to be changed

Hello,
My master data team has insereted a wrong valuation class in the material master record. Purchase order has been raised and a GR has been done for the same. SAP gives following steps to change the valuation class:
The valuation class cannot be changed, choose 'Display error'
Message no. M3368
"Diagnosis
You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
Valuated stocks in the current period or in the previous period
Open purchase orders or delivery schedule lines
Production orders for which a goods movement has already taken place
System response
Your change is reset by the system.
Procedure
If valuated stocks already exist, you can change the valuation class only as follows:
a) Post the stocks of the material to an interim account.
b) Change the valuation class in the material master record.
c) Post the stocks of the material back to their original account.
If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted."
My question is how do I post the stocks to an interim account since stock accounts are configured to post automatically?
If anyone knows how to manage the posting, please let me know.
Thanks
Keyur

Hi,
Make the movement with a movement type in MIGO that posts to the same account in FI for all Valuation classes.
After changing the Val. CLass then reverse the above movement.
Kind regards

Windows 7 locking after 1 minute

OK, so starting off, i have read over all of the other posts and have found none of them work.
My computer locks after 1 minute, this started today, i have not changed any settings, nor have I recently as I have had this computer for a while. I have looked at all of the settings and i have all of the sleep/hibernation functions turned off.
I have the "lock screen on wake up" function also turned off. I do however have it set to dim, and then turn off the display after 1 minute, but this has nothing to do with the sleep function. It does not dim the display before locking, only after,
as if it wasnt locked, please give me anything you can to help as this randomness is very irritating.

I don't think Arthur Xie's response should be marked as the answer. This doesn't sound like it has any relevance to Craig's original question, and hasn't been corroborated by anyone. It threw me off the scent when I encountered the exact same
problem - Windows 7 locking me out after 1 minute and requiring password re-entry
It turns out that Ramesh's answer was the one that worked for me. Somehow my machine got set to wait 1 minute and "on resume, display logon screen" was ticked. Don't know how this happened.
I initially missed this, because the selected screensaver was "(none)", so I assumed all the settings on this page were irrelevant. It does raise the interesting usability point that a screen saver of "(none)" can still blank the screen, even
though the user hasn't purposely selected the "Blank" screensaver.

Why is my image more pixelated after changing the DPI?

I am creating a magazine for a university project and I have chosen 2 images to be included in one of my articles. I changed the DPI of both images in PhotoShop to 300 DPI and saved them before placing them into my InDesign document but they appear to be even more pixelated after this than what they were when I placed them straight from the internet. Will they be like this when I print it or does it only look pixelated on my screen? Any help?

What is the effective resolution in InDesign? (look into the link panel.) (BTW resolution of an image is measured in PPI, not in DPI!)
Is the link up to date?
How do you proof it? Did you turn on the high quality display?
What file type are you using?
What is the scaling factor of the image in InDesign?
How did you change the resolution in Photoshop? What was the first resolution, did you change the size of the image?

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

How can I allow the application to line through a field that has been locked after being digitally signed? We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?

You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

After changing my icloud email, i am not able to sign in on my iphone 4.

After changing my emial on apple,my phone lock the icloud and do not allow me to change my email on my phone. therefore i could not sync my apps to my itune.

John T Smith's linked solution worked for me.
Correct Answerby Romsinha on Apr 19, 2014 11:51 AM
Please navigate to C/Users/User Name/AppData/Local/Adobe/OOBE/opm.db and delete it(Windows).
Mac: ~/Library/Application Support/Adobe/OOBE/opm.db and trash it.
Enable user library: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.
Launch CC desktop and try to sign in.
The only thing I'd add is to remember to go to the Activity Monitor to quit Creative Cloud.

Problems with OEM after changing a database's hostname

I am having a whole pile of trouble after changing the hostname of an Oracle server 10g R1 -- it's actually 10.1.0.3.0 x86_64 on a Red Hat Enterprise Linux 4.0 server.
Specifically, I had a server called "foo" on which I installed 10g R1, with the SID and service ID both "BB8PROD". Then I realized that I had to rename the server to "bar", which I did (via /etc/sysconfig/network and /etc/hosts).
Then, I edited $ORACLE_HOME/network/admin/tnsnames.ora and $ORACLE_HOME/network/admin/listener.ora to reflect the new host names. I restarted the listener and the database, both of which came up fine.
However, when I start OEM via "emctl start dbconsole"), it still gives me the management URL of http://bar.domain.name:5500/em/. Obviously, that's the <i>old</i> hostname and not the new one. If I visit that URL (which I can keep alive via a CNAME in DNS), then I get the following message despite the instance running just fine in the background:
"Database: BB8PROD
The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
It seems that OEM doesn't know where to find the instance since I changed the name in the listener and tnsnames files. I've tried using <tt>emca -r</tt> to OEM start on the correct hostname (i.e., bar) but even when I do that, it still can't connect to the database.
I found this URL about changing port numbers and the associated XML files that OEM calls, but that didn't solve my issue. I've looked online for help, and most of the articles I've found are about 10g R2, where OEM seems easier to reconfigure.
So, when changing the hostname of a database, what am I supposed to do to OEM to have it recognize the changes?
Thanks!
Chris

Hello Dieter,
I do not have a direct answer to your question, however , I am using an ECC6 system and I checked the two tables that you mentioned (SRGBTBREL & SRRELROLES). SRRELROLES has 3.8 million entries and SRGBTBREL has 2700 entries.
I would talk to your authorizations people to see if there is a generation or maintenance step that needs to be performed.
Not a lot of help I know. Good luck
Greg Kern

While assigning batch material get locked in different plant.

Dear Guru,
After implementation ,frequently facing problem, In CO02 we are assigning the batch manually to the material but one material is configured with valuation type domestic / import. while assinging the bacth to the material system showes to another user who iis entering the same material in different plant is xxxx user is locked the material so u cant assign the batch, but batch we are maintiaining in material level. (batch maintianed in material level.)
currently we are going in sm12 transcationa and removing the lock, but we want to know why it is happening. what is the root cause for the error.
Please advice.
Thx
Nara

HI
It is Standard SAP at a time same material or its masters cannot be used by multiple users ids or with same user id also
system gives error material is locked.You can unlock it thru SM12 but be careful while soing so some the data which the another user using may be or may not be lost.
the better way is to ask the user to come out of that material or release it after doing his work
Regards
Anupam Sharma

Material(Article) locked after change

Similar Messages

Maybe you are looking for