Material assigned to Class
Hi Experts,
Can someone tell me step by step procedure to assign class to any material. Please give T-Code also.
Full Points, if helped.
GR
create a class in CL02 it is a master data. the class is nothing but the group of characteristics.
theen go to MM01 and select classification view and maintain the class there.
since this is at client level this will be constant for all plants
reward if useful
sk
Similar Messages
-
Assigning valuation class when creating Material
Hi
I want assign "3100 -Trading Goods valuation class" to my material which i am creating. in Tr.code MMH1
In the accounting1 view, under the current valuation section, there are no options at all to select valuation class.
please help me figure out how to get the 3100 option into my valuation class.
i will send u a screen shot of my problem,if u need..gimme u r email id.
i will assign points
thankshi
u need to assign val classes to act cat ref.That act cat ref assign to mat type .
then syst automatically will give option of val class when ur creating mat of that mat type.
Log gen->mat master-> basic settings-> def att of mat type
here u assign act cat ref to mat type.
MM-> val & act assign ment -> act detr wth wizard-> def val class
here u assign val classes to act cat ref.
ok
if its ok
assign points
nani -
Assign Batch Class to Material - Using Upload
Hi All,
I have a requirement to assign batch class to material master (MM01 / MM02) - Classification view - Batch Class (022).
This assignment has to be done through a upload program (BDC / LSMW / BAPI). Can someone please suggest me the best possible option.
Note:
1. I don't want to assign batch characteristics values. Just wanted to assign batch class to material.
2. I have already created LSMW to load material master using LSMW direct input approach.
Thanks,
SomuHi Dev,
My existing LSMW was created using direct input approach which has no option to assign Batch Class to material.
So my thought is to create a separate program (LSMW / BDC / BAPI) to assign batch class to material.
Any best possible option please?
Thanks,
Somu -
How to assign a class to the material through ABAP code
Hi,
I am working on a transaction in ABAP which takes material name, material description and a class from the user. Now, after this much input I create the material, its configuration profile through the ABAP code. For this I know I have to make relevant entries in tables MARA, MAKT, CUCO.. and also check for the existence of the class in the table KLAH.
Now the point where I am stuck is that I am not able to get how to assign the class to the material through the code. I am able to get the internal class id from the table KLAH but I am not able to figure how the internal material number is being generated in the table INOB and i need this number as well as the internal class id number to insert a record in the table KSSK to show proper assignment.
Can anyone please suggest me some solutions?
Thanks....Hi,
I tried using BAPI_OBJCL_CREATE. In order to understand it functioning better I created a material and class (of type 300) through transactions MM01 and cl01 respectively. Then i created a report and called the FM BAPI_OBJCL_CREATE, gave the material name as the material above, table as MARA, class as the one i created above and class type 300. I even analysed the message of the table return (return-message) after executing the report. The messahe said assignment done. But when I checked mnaually in cl20n there was no assignment done to the required material. There was also no entry for the required material in the table INOB which I need.
Can anyoene tell me that where am i going wrong? Please do help. -
Material Master-Valuation class
Dear Friends,
Depends upon the material type valuation class value is fetched by the system......Can any1 explain how this happens?......where it is assigned?.....whrs the link?.......Thanks in advance......Hi saravana
Following the configuration path:
IMG>Materials Management>Valuation and Account Assignment-->Split Valuation without wizard
Here we will be assigning the valuation grp to the plant and give the G/L account also
Check the t.codes .OMWD, ,OMWB where assignment is done. Because of this only the valuation class will come in our MMR ->accounting tab 1
Regards
Srinath -
Tables for mm03 (specification-material assignment)
Hi All,
We have a need to find out which material masters are assigned to GCD (Global Chemical Database) specifications.what are the possibilities from Material master side.
Specification information (in tab "Spec assignment") on material master side is on a structure RCGMMJIOT. can anybody help with the table name for the corresponding structure.
Thanks in advanceHI Vibhuti,
More detailed information about EHS tables are as follows
Description--> Table Name
Specification Header ESTRH
Identifiers ESTRI
Identifier - Regulatory list assignment ESTRL
Referencing in specifications ESTRR
Specification - Material assignment ESTMJ
Specification status assignment ESTST
Specification - Value Assignment Type Assignment (Property tree) ESTVH
Value assignment Item (e.g. composition values) ESTVP
Shadow table for AUSP (Characteristic values) ESTAUSP
Additional Information: Value Assignment Assessment ESTDR
Additional Information: Value Assignment Source ESTDS
Additional Information: Value Assignment Usage ESTDU
Additional Information - User-Defined Text ESTDF
Value assignment table (Classes) ESTVA
I hope this complete list may will be helpful for you.
Regards
Amol -
Assigning of Classes to superior classes Using SXDA_Tools...Urgent
Hi All,
I have a requirement in which i have to create classes(Material classes, CL01) and subclasses for them. In the second step i will have to assign the created sub classes to their respective superior classes.
I could create classes using batch input program "RCCLBI01" and object type BUS1003 from transaction SDXA_TOOLS.
However i am not sure how to assign the created classes to their respective superior class. Does anyone know any direct input program or batch input programs to assign a class to its superior class ??See [http://forums.sun.com/thread.jspa?threadID=5333060&tstart=0]. In general, if you use third-party libraries in your code, you should include these libraries in Javadoc's classpath option when generating documentation.
-
Is it Possible to assign Valuation class without accounting view in MM
Hi all,
I have check my client system for materials having without accounting view while checking in table mbew for this material having valuation class.can anyelse say is it possible to assign valuation class without having accounting view.
Advance thanks,
rarajaHello ,
It is not possible to have a valuation class without accounting view.
There is some mistake that you are possibly making . pls check the same .Pls check if u r viewing the material master at the correct plant level .Also if you say that in MBEW valuation class exists , find out l the corresponding valuation level, the see the material master at the same level . You will definitely find the accounting view.
Regards
Anis -
Different material- same valuation class-same movement type - but should hi
dear all,
Different material- same valuation class-same movement type - but should hit different gl account.
the requirement is the materials are different but having same valuation class. Now during issue certain gl account are hitting because of val grp code, account modifier and account determination in mov type. Now my question is can i use same movement type and hit different gl account for materials having same val class???
It is possible??Hi,
In OBYC, we maintain G/L account for the transaction key (for ex: GBB) for the combination of Val. grouping code, Valuation class & account modifier (ex: VBR - determined via mov.type).
As per your requirement, Materials have the same valuation class and you are using the same mov.type for Goods Issue, so only option is to use different val.grouping code (which is assigned to a valuation area).
So in short, you can trigger different G/L for the different materials with same val class, mov.type only if the Plant - valuation area is different.
If the Plant is same then system will always determine the same G/L even though materials are different.
Hope it is clear.
Thanks & Regards, -
How to get ATINN value based on material number and Class Type ?
I have below SELECT stmt code which gives the correct value of atwrt based on materil no and ATINN.
However in quality system, it is failing because in quality system "atinn" value is not 0000000381. It is different.
So how can I get ATINN(Internal characteristic) value based on material number and Class Type?
-Obtain the batch characterstic value for the Material******************
SELECT atwrt
UP TO 1 ROWS
INTO v_charvalue
FROM ausp
WHERE objek = mcha-matnr
AND atinn = '0000000381' " 'US80_FRENCH_ON_LABEL'
AND klart = '001'.
THANKS N ADVANCE.Hi SAm,
use the Below function module to get the Atinn for Atwrt for thr Class and MAterial combination..
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
classtype = '023' "Class type
object = w_object "Material number with Leading zeros
no_value_descript = 'X' "Default X
objecttable = 'MCH1' "Table name Mara or MCH1 or MARC
TABLES
t_class = t_class "It return the Batch class available for the above combination
t_objectdata = t_char "Return Batch characteristics(ATWRT) and their value ATINN in this table
EXCEPTIONS
no_classification = 1
no_classtypes = 2
invalid_class_type = 3
OTHERS = 4.
Regards,
Prabhudas -
Bom dia pessoal.
Gostaria de saber se alguem já passou pelo o problema abaixo.?
No ambiente de produção ao se criar um nota fiscal pela a J1B1N e ao começar a digitar alguns itens o sistema gerar o seguinte DUMP.
Versão: SAP ECC 6.0
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was no
caught in procedure "CHECK_NFENUM_NUMERIC" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "SAPLJ1BB2", the system attempted to access the field "J_1BDYDOC-NFENUM" using the length 0.
However, a partial field access with the length specification 0 is not allowed.
Já analisei o forum abaixo e verifiquei na tabela J_1BAMV e não esta para o Field Group 77 como Display.
A minha duvida é a seguinte realmente deve estar como Display ou existe uma nota da SAP a ser aplicada para resolver tal DUMP.?
Att;
Ângelo Junior
Edited by: Angelo Marinho Teixeira Junior on May 6, 2011 6:04 PMBom dia Angelo,
O detalhe não é só direção (entrada/saída), mas emissão (sua ou de terceiro).
Podemos emitir uma nota de entrada em nome de terceiro, neste caso é o ERP que deve numerar e enviar ao GRC/Sefaz... Sendo emissão de terceiro (saída ou entrada) é apenas para registro, basicamente esta a diferença.
Atenciosamente, Fernando Da Ró -
Assign several classes to multiple cells in a table?
Hello,
I've searched this forum and the Internet for hours, but haven't been able to find a solution for this very basic problem. I'm editing a large table with CSS class="basicTable" assigned to it. In my stylesheet there are two classes for cell properties:
num for cells that contain a number
alt for cells with an alternative background colour
I would now like to assign both classes to a group of cells <td class="num alt">...</td>, but not to the complete table. Is there any way to do this other than editing each individual cell? When I select one cell, I can edit the CSS class in the Tag Inspector. When I select multiple cells, all I see in the Tag Insector is the CSS class for the whole table, not for the cells I have selected.
I am editing several large tables each with up to 10 columns and 20 rows, some cells of which are merged. It is really time-consuming to go through each cell individually.
Has anybody ever encountered this issue?CSS styled Table Columns
http://alt-web.com/DEMOS/CSS-3-color-table.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
How to assign a class for different colored links
Hi. I'm new to CSS and HTML and Dreamweaver. I'm trying to
get links to be different colors within the same page. I have a
navbar with a CSS style that I've assigned colors to all my links
there. They work. But if I attempt to change the links in the main
content it screws up the navbar links.
So, now, I'm trying to assign the different colors to the
links in the main content. I have the link color down but I can't
seem to get the visited, hover, active to work.
So, I read somewhere you have to assign a class to be able to
have different colors for your links on the same page. There is a
class assigned to the links I want to change but it only assigns
the link color, not the visit,hover,active colors. I don't know
where I am supposed to put the code so that only the main content
links are changed. Here is what I came up with from reading and
studying. Can somebody tell me what's wrong with it and where I am
supposed to put what in each page? This is just a CSS style page I
made and I have no idea if I even did that right. Then, I can't
figure out how to tell each page to include it for that class only.
Thanks.
@charset "utf-8";
/* CSS Document */
<class="style49"
<style type="text/css">
a:link {color: #3333FF}
a:visited {color: #009900}
a:hover {color: #6600CC}
a:active {color: #FF0000}
</style> </class>Pseudo-classes and container styles are what you need - here
are some
tutorials.
http://www.thepattysite.com/linkstyles1.cfm
http://www.projectseven.com/tutorials/pseudoclasses/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Newbie744" <[email protected]> wrote in
message
news:fn3***$m6q$[email protected]..
> Hi. I'm new to CSS and HTML and Dreamweaver. I'm trying
to get links to
> be
> different colors within the same page. I have a navbar
with a CSS style
> that
> I've assigned colors to all my links there. They work.
But if I attempt
> to
> change the links in the main content it screws up the
navbar links.
>
> So, now, I'm trying to assign the different colors to
the links in the
> main
> content. I have the link color down but I can't seem to
get the visited,
> hover,
> active to work.
>
> So, I read somewhere you have to assign a class to be
able to have
> different
> colors for your links on the same page. There is a class
assigned to the
> links
> I want to change but it only assigns the link color, not
the
> visit,hover,active
> colors. I don't know where I am supposed to put the code
so that only
> the
> main content links are changed. Here is what I came up
with from reading
> and
> studying. Can somebody tell me what's wrong with it and
where I am
> supposed to
> put what in each page? This is just a CSS style page I
made and I have no
> idea
> if I even did that right. Then, I can't figure out how
to tell each page
> to
> include it for that class only.
>
> Thanks.
>
> @charset "utf-8";
> /* CSS Document */
> <class="style49"
> <style type="text/css">
> a:link {color: #3333FF}
> a:visited {color: #009900}
> a:hover {color: #6600CC}
> a:active {color: #FF0000}
> </style> </class>
>
>
> -
Assign Valuation Class to Company Code
Hi Gurus...
Quick Question: we are migrating from R3 to ECC 6. One of Treasury Management config points is Valuation Class definition. R3 used to have a config point in IMG called Assign Valuation Class to Company Code/Transaction Type. But I cannot find same in ECC6. Even CTRL-F does not help. Did it get moved and renamed?
Thanks,
JSHi,
Don't know the IMG path but what you can try:
1. Go to the required IMG transaction in R/3 and look up the table / view (click on a field in the IMG transaction / push F1 / click icon Technical Information)
2. In ECC 6 go to transaction SM30, fill in the table / view name from step 1
3. Click icon Customizing
4. In pop-up click Continue w/o Specifying Project
5. An overview appears with IMG config points where the specified table / view is maintained. Choose the appropiate one by double clicking.
Prerequisite is the existence of an IMG activity exists for object maintenance.
Regards,
Andre -
Material Assignment in Master recipe
Hi,
Is there any FM/BAPI to assign material into a master recipe? Currently, we are using BDC to call C202 transaction for this purpose. This process takes long time for material assignment which leads to performance issue.
Thanks in advance
Senthil Kumar AIn LSMW , object BUS1012 is offered for routing creation and change .
Unfortunately there is no object for master recipe creation & change and there is no standard batch input, nor BAPI/IDOC, nor direct input. You should create your own batch input or CATT.
Here is a possible procedure:
Please record a Batch-Input with transaction SHDB and try if this work. If not please try with TOFF as described in the notes.
Read carefully SAP note 142022.
Maybe you are looking for
-
Olp PC crashed, new PC now how do I get my music back?
Have new PC now. Saved all folders from old PC HDD. Will install iTunes 7.6 on new PC but how should I get my music back from the old PC's HDD? My iPod contains music purchased from iTunes, plus music from alot of CD's I own. WOuld like to recover mu
-
Error while posting goods receipt
Hi All, I am getting error message while posting goods receipt. The error says posting only possible 2007/06..... Thanks in advance kumar
-
So i just got my MSI Z77MA-G45 LGA 1155 Intel Motherboard z77 slotted it all together all seemed fine untill it wouldn't recognize my hard drive. I currently dont have a dvd drive at the moment so i put all the files of the win7 and msi drivers on t
-
Splash screen when running from shortcut
I have a web start app, version 1.2, with a custom splash screen and icon (2 entries in jnlp, one with type="splash"). This works just fine IF you run from the web page (I get a nice splash, followed by the "loading" window with my nice icon). If aft
-
SensMe "Content Transfer" on PC for USB
Hey Everyone, I have a DSX-S310BTX coming my way and I'm REALLY excited about it! While waiting for it to arrive, I decided to get a head start on getting the USB stick I plan to use in it up to speed. It's a generic 32 GB USB stick drive. I've downl