Material Assurance Report

Hi,
Is there any Material Assurance Report in SAP which would tell me whether the materials are available for the Production Order (or rather several Production Orders at the same time).
Thanks,
JP

Hi
There is a provision through which you can get material availability for the production order.It is called pull list , it will show the requirement and availbaility of material.MF60
Try whether this can meet your requirement
hope this helps
regards
Prakash

Similar Messages

  • Material Ageing Report

    Hi
    I need the Material Ageing report as the given following requirement
    1) Material With GR Date
    2) The Ageing will be for 30, 60, 90, 180, 270, 360
    3) Material with Normal & Special Stock
    4) Material with the Split Valuation
    If any one have worked on this developement then Reply

    Hi,
    Check the report in t.codes MC.9,MC.A,MC.B & MC.C
    OR
    Go for development with  an ABAP report
    Regards,
    Biju K

  • Excess Material Consumption Report - For a Particular Period

    Hi,
    For a particular Time Period, say 30 days, I require excess material consumption report. This report is for the materials ( say ROH, or HALB) that are confirmed through co11n. Taking MTS into consideration with Strategy Group 40, please suggest a standard report (if there is any).
    Regards,
    Pavan

    The T code for viewing the standard report for
    Material Analysis - MCP5.
    Production Order - MCP3.
    Material Usage Analysis - MCRE.
    Please try it.
    Regards
    R.Brahmankar

  • Material consumption report for sales made artcle wise - help urgent

    Hi Folks,
    My client need a report which consist of
    The raw material consumption report
    1. Article wise (material group)
    2. QTY
    3. Value
    4. or all sales made for foreign customers
    5. Business area
    Please help me
    Thanks
    Narasim

    Hi,
    Check COOIS report.
    It will show the consumption order wise just filter Movement type 261.
    Regards,
    Shayam

  • Material Ageing Report Through ABAP( MC46 Tcode Wise)

    Hi,
    I want to develop report for Material Ageing Report which is similar to the Tcode MC46 but the problem is functional consultant told me about this tcode only and there is no such information regarding the specified tables which are to be used. I had searched in SDN also but i did not got the desired  information.
    Edited by: nav009 on Mar 11, 2010 12:31 PM

    Hi,
    After comparing the tcodes MC46 and MC50,i am able to trace out that data is coming from the MBEW table but the problem is the ageing logic works on As On Date and the data to be *picked Less Than Equal to Posting Date *.
    There is no such field present on which i can made this logic succesful.. i tried to develop the report through different tables also(BSIM,MSEG and MKPF) but the quantites and the amount is coming accurate after comparing it with the above mentioned Tcodes.
    Is there any other table through which this problm can be solved....?
    Edited by: nav009 on Mar 12, 2010 5:42 AM
    Edited by: nav009 on Mar 14, 2010 12:21 PM

  • To develope  material aging report

    hi
      i want to develope a material aging report plz tel floe for this one and tables
    thanks
    venkat
    Moderator Message: Please read the rules of Engagement. SCN is not here to your job for you Thread locked.
    Edited by: Neil Gardiner on Jun 15, 2011 3:52 PM

    Try this standard TC
    MC46 - Slow moving Items
    MC50 - Non Moving Items
    Thanks,
    Sankar M

  • What is material Yeilding report

    hi ,
        what is material yeilding report , is there any standard program for determing the same . If any one has the sample code for the same it will be of great use for me .
    thanks in advance ...

    Hello
    I am not sure if you saied "ExpectYieldVar" in production order/process order, you can Press F4 this field for SAP help, saied"Expected yield variance
    Specifies whether a yield variance is to be expected when the finished product is delivered to stock, as the result of confirmations that have already been entered.
    A yield deficit occurs during final confirmation of operations, as soon as a yield quantity is confirmed that is smaller than the planned order quantity. The confirmed scrap is not taken into account.
    A yield increment occurs during partial confirmation or final confirmation of operations, as soon as a yield quantity is confirmed that is greater than the planned order quantity. The confirmed scrap is not taken into account."
    also you can use COOIS report for order Yield in header level .
    Benny

  • Inventory Material Movement Report in R12.1.1

    Dear All,
    I am currently working in a implementation project. My client needs a Inventory Material Movement Report on Periodical Basis
    Report Should show : Item Name, Item Desc, Sub Inventory, UOM, Opening Stock of that period, Receipts for that Period, Adjustments and Closing Balance.
    Please suggest me how to go about this on the same. Please someone share the code if someone have any. What logic do i need to follow and where to pick the data.
    It is show stopper for us now as we do not have any standard report.
    Thanks,
    Addy

    Hi Aditya,
    You can find all the information you need in mtl_material_transactions table. If you need code combination id too, you can make use of a standard view CST_INV_DISTRIBUTION_V. Other than these, you can join these tables for other info..
    MTL_SYSTEM_ITEMS_B MTL,GL_CODE_COMBINATIONS GCC.
    In MMT, use qty <, > 0 for receipts and issues. use group by to get opening and closing balances.
    Regards,
    Siva Kumar.

  • Wrong result in DMBTR in material statement report

    Hi Gurus,
    I am creating Material Statement Report for that i am getting data from MSEG table. From this table i am taking two fields SALK3 and LBKUM  now division of this two field assigning in DMBTR
    like  WA_MSEGDATA-DMBTR  = ( ( WA_MSEGDATA-SALK3 / WA_MSEGDATA-LBKUM ) * WA_MSEGDATA-MENGE ).
    here  WA_MSEGDATA-SALK3  = 1,533.87   and WA_MSEGDATA-LBKUM = 2,442.000 and WA_MSEGDATA-MENGE = 1.000
    finally in  WA_MSEGDATA-DMBTR = 0.00
    every time i  am getting wrong answer in WA_MSEGDATA-DMBTR  Please Solve me This problem......
    My code is as under.....
    <<post only relevant portions of the code>>
    Edited by: kishan P on Jan 30, 2012 11:27 AM

    HI Mahi,
    As what I understand from your problem, please check sample code it is working fine.
    and take care after decimal how many digits you are looking for if you are using dmbtr type mseg-dmbtr then it will be of curr 13, 2 . you may check how many digits you require after decimal accordingly you define your data type for dmbtr.
    types: begin of ty_test,
           lv_salk3 type mseg-salk3 ,
           lv_lbkum type mseg-lbkum ,
           lv_menge type mseg-menge ,
           lv_dmbtr type mseg-dmbtr ,
          end of ty_test.
    data : it_test type table of ty_test,
           wa_test like line of it_test.
    select menge lbkum salk3 from mseg into table
        it_test up to 10 rows.
    delete it_test where lv_lbkum = '0.000'.
        loop at it_test into wa_test.
          wa_test-lv_dmbtr = ( wa_test-lv_salk3 / wa_test-lv_lbkum ) * wa_test-lv_menge.
          modify it_test from wa_test transporting lv_dmbtr.
        endloop.
        if sy-subrc = 0.
        endif.

  • Need monthly "material-wise" report on inventory status.

    Hi, gurus!Good Morning.
    I am pankaj recently i joined in SAP-MM.I have 4 yr.of domain exp.in SCM.
    Now,i allocate to one implementation project in Textile industory.Here there two plants,out of two GoLive of one plant has been done & in April-12 there is Golive of next plant.
    Now, i am working on some standered reports.here client wants monthly material wise inventory status report & Daily material movement report materialwise.
    i generate the report in" S_P00_07000139 "but it didn't show materialwise,it shows all material separate.
    Request to help on the same.
    Regards,
    Pankaj.

    HI,
    No standard report will full fill your requirement
    you have develop Z with help of ABAp consultant
    for Material document table MKPF and MSEG
    and check following link also it will helpful to you
    [Opening Stock and Closing Stock fields and Calculation;
    Regards
    Kailas Ugale

  • Material aging report

    Hi everyone ,
    I have to develope material aging report, where client wants the output that they want to see is as fallows ..
    1) 12 Textbox with manual input in 6 textboxes.... i,e they have an existing local ERP report in which they will enter 6 textboxes manually
    Ex.. If they enter '0' they want 1 to be populate automatically and the data should be of 1 days back , If they enter '30'  in next textbox they want 31 to be populate automatically  and they want 1-31 days data , If they enter '48'  in next text box they want 49 to be populate automatically and they want 31-49 days data and so on .
    2..The thing is that how to give a 6 textboxes for the manual entry
    3..What are the inputs fields to be consider for the material aging will the 'LQUA' table fields work ... as i came to know there is  a standerd report  for Inventory Aging .....should i go for this.
    Thanks
    Srikanth

    Hi
    There is no standard report. z-report would be the solution.
    If you use, India Localization for subcontracting - J1IFR may help.
    Best regards
    Ramki

  • Customer Material Inventory Report

    Hi All,
    I would just like to ask if there is a tcode in sap or a report that shows a Customer Material inventory report.
    Thanks all

    Hi Rich,
    Thanks.
    May I ask further how do I go about the selection screen for MBBS.
    Best regards,
    Kevin

  • Material Consumption Report

    Hi Guys,
    I have to develop a custom report intended for use by our factories and is design to give them detail  information on raw materials actual usage relative to how much should have been used (standard usage) by an individual product or product group. 
    The column of the report that is probably the most challenging to determine by taking the BOM quantities for each product in the product group under consideration and multiplying them by the actual output achieved for the respective products in order obtain the standard usage. 
    I have been looking at doing the following. Substracting the fields of txn COR3(Display process order material list), from txn CORT(Process order confirmation display: goods movement). Is this the right approach.
    Any screens, transactions, tables, structures for me to do this report would be greatly appreciated.
    Thank you for the help.
    Sumit.

    Hi,
    Have you tried looking at the standard material consumption report - Transaction MCRE?
    Rgds.

  • Material Forecast Report

    Hi,
    Is there any Material Forecast - Report.
    We want the following columns
    Material no.
    Material Description
    Material Group
    Month Wise Forecast Values
    Please let me know if we can get any report with the above following values from Standard SAP.
    Also, if there is any other Forecast Report Available?

    You can try the below reports..
    ME2V  Goods Receipt Forecast
    MPBT   RMMDBTCH       Total Forecast In BATCH Mode
    MPR1   RMPR1001       Forecast Adopted from External Data
    MP00   MENULPRO       Material Forecast Menu
    MP32   SAPMM61W       Display Material Forecast
    MP33   SAPMM61W       Reprocess material forecast
    Hope it helps.
    Thanks,

  • Material Reconciliation report

    SAP offers a standard material reconciliation report MIRCMR. The pre-requisites being a reconciliation class - 50, a few characteristics and a PI sheet.
    I do not have PI sheet implemented. Is it possible to run this report without PI sheets? Moreover, I am unable to assign the reconciliation class to any of the component materials - neither in the BOM nor in the recipe. Is this normal?

    >
    Venkatesh Ramakrishnan Iyer wrote:
    > For instance, I want to compare planned vs actual consumption of components. If I assign the movement types in SPRO, where are the value fields linked to the parameter? There is one field at bottom of parameter configuration, but that is limited to table TC22's fields - which unfortunately does not have the fields that I need.
    >
    If that is all you want to do, then why don't you just use report COOIS - it will give you that.
    If you want to use the material reconciliation to do that, then just create a formula that takes the parameters PC_P01 and PC_P02 into condieration.
    I.e create a formula that does 'PC_P01 - PC_P02' and set the expected value to be 0 (not this is just an example - it is not realistic because it does not take cancellations into consideration)
    in customizing you have three customizing points - check under 'process data documentation / material reconciliation' in the pp-pi section.
    - create formula paramaters - if you need to create some use any of the PC_PXX as a reference - they are all the same - otherwise use the standard ones they should be sufficient
    - assign movement types to parameters - assign the above parameters to a movement type (or multiple)
    - create formulas - this is where you set up the calculation you want to do for your material reconciliation - this formula you will assign to the relevant characteristic in your 050 class
    hope this answers your questions

Maybe you are looking for