Material based on SLED

HI All ,
                To maintain stock of material based on SLED , check the following :
a ) Remaining shelf life in PO
b ) SLED in PO
c ) SLED at GR
regards
deepu

Hi,
To maintain SLED
1)Activate for the plant and m,ovement type
2)Maintain  remining self life in Material master plant stock view
3)Must be maintained in PO
4)Enter the expiry date or date of production in GR
Regards

Similar Messages

  • Picking Strategy based on SLED

    Hi All,
    I have a business requirement for picking of material for a specific Storage type indicator R03 based on SLED but in a manner as explained below.
    The material is currently lying in say 6 different storage types viz 021, 031, 101, 102, 103, and 030. Now, the user wanted to pick material with the lowest SLED across all the storage type mentioned above at the time of TO creation. So i tried using the EXIT MWMTO013, but then user later wanted to exclude some storage type (Storage type 101 in our case) as well for picking irrespective of SLED, which means they wanted to pick that stock of material which has the lowest SLED in Styp - 021,031,102,103,030 only and the system should not look into 101 even if the lowest SLED is lying there.
    All, i could thought was either we define those specific storage types in the OMLY transaction but suppose if any new storage types are created later and those are required for picking then we will have to maintain as well along with others so the search sequence will be as +++, 021, 031, 102, 103, 030 as the first, second,....storage type search for R03 storage type indicator.
    So, can anyone help in here if we can accommodate this request for picking the stock of any material based on lowest SLED from among st some storage types and not looking into others even though the lowest is lying in say 101(in our case). and without maintaining any data even if new storage types are created later.
    Any help would be highly appreciated.
    Thanks,

    Hi
    Both are having different meaning during search, if you maintain +++ then system search the Quant across the storage type (you can say at warehouse level) when you define 021, 031 then it will individually go and find from that storage type, in the above scenario (+++ will get satisfied first hence your second statement "but in a manner as the stock should be picked always first from 021 and then 031, then 030 and 102" doest not hold true in that case
    Take a scenario where your lowest Quant exist in 031 as per SLED, and two Quant exist in 021 which are having different SLED which gets expired after the Quant from 031. What is ur expectation from the system in that case
    Either you can have SLED for the warehouse (across the storage type) or individually for a storage type or else you can go for custom code where based on +++ you will find all the Quant from the  LQUA across the storage type and then sort it based on Storage type+ SLED and then start allocating the Quant

  • How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

    Hi All,
    How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
    Assume Material is Pen.
    While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
    Kindly help me out.
    Thanks,
    Renjith Jose

    A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
    Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
    "Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
    hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
    Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

  • Pricing of material based on batch

    hello gurus,
    i have a question,here i have scenario in which i want to differentiate the price of the material based on batches.
    pls correct me if i have made some wrong,
    now v/05 i have created a table in which i have taken batch and material as my field
    and now in v/07 i have assigned to access sequence ahd this acess sequence i have added to PR00 condition type.
    now when i go to VK11 i tried to use the acess sequence and give price i get an error.
    pls if u give me some suggestions it will be a great help to me.

    what error do you get...?
    If you are pricing with regards to batch everytime a batch is over the PR00 record will expire. so every time you have a new batch you will have to have a new record. Sound very tedious.
    Let us know when and how exactly do you wish to achieve this..
    Regards

  • PO Release Strategy - Only for non material based

    Experts,
    I have a requirement to implement a release strategy for a single plant for POs for NON material based purchases ( only for using account assignments, cost centers etc).
    The release strategy I configured is working only for the specific plant I want... However, it works whether its a material based PO or a non material based PO.
    How do i get the strategy to work for only the service based purchases, and not the material ones?

    Thanks for the replies but I'm not sure if they are applicable...
    I did create a characterstic for item categories and added the one's I wanted to have... I did NOT include a blank because i thought that would make the difference between the material based PO and non PO. When we I create Po with material (even with no account assignment) it still goes through release.
    Any reason why that is?
    I dont believe the material group solution will not work either because we require material group for material and non material based POs..
    Side note - when i try to use CEKKO with KTTNP, i get a "KTTNP does not exist error." So i used EKPO - KTTNP... hopefully thats ok, but please let me know if its not.
    Edited by: farmerj3 on Jan 30, 2012 3:36 PM
    Edited by: farmerj3 on Jan 30, 2012 3:39 PM
    Edited by: farmerj3 on Jan 30, 2012 3:48 PM

  • How to create configuration of a variant material based on funciton module

    Hello, ABAP experts,
    I want to create configuration of a variant material based on FM ( MRP3 view, set configurable material and configure the variant ).
    I use fuction modules:
        CUXM_SET_CONFIGURATION
        CUCB_CONFIGURATION_TO_DB
    and subsequently commit work.
    But the data table was not updated, that is, MRP3 view is still empty.
    Can you give me a sample, tell me how to used these FMs.
    Thanks and BR.

    When I call FM , CUXM_GET_CONFIGURATION, the SUBRC = 0, but ET_RETURN get two messages: CUXM1-001 , Overwriting existing configuration, and CUXM1-007, Configuration in target system is consistent and complete.
    Can you give me a sample ?

  • Reg. Usage of finding Highest Material based on BOM items/Components

    Dear Experts,
    My requirement is that i need to explore the highest level of material based on BOM item / components as input criteria.
    I am using FM 'CS_WHERE_USED_MAT' to get the header BOM based on BOM item. But i need to get the header BOM based on BOM item as input criteria and check whether the Material Type of Header BOM is 'FERT' (Finished goods). Else, i need to get the next highest level of BOM based on Header BOM got in the previous step and check whether Header BOM is 'FERT'. Else, i need to continue to explore the next highest level of BOM. Kindly let me know the logic i need to use or any FM / BAPI available provided by SAP. Kindly help me in the above regard.
    Regards,
    Ramesh Manoharan
    Edited by: ramesh.manoharan on Jan 18, 2010 6:55 AM

    closing the thread

  • How to fetch the current stock of material based on Plant?

    Hi Experts,
    Could any one tell how do i need to get the current stock data of the material based on Plant.
    Thanks in advance.
    Regards,
    Abdur Rafique

    Hi ,
    MBEW stores the value of particular stock . T-code to find stock MMBE compare both wiht table and tcode.
    please let me know if you still find any issues .
    Thanks and regards,
    Rajeshwar

  • Availability of material based on the shipping conditions

    Dear Friends,
    Please mail to me how to configure the availability of material based on the shipping conditions?
    That is when we give the shipping condition in the sales order (va01) for example by air 1 day, by road 5 days and by water 6 days. The system should automatically give the availability of the material based on the shipping conditions we give in the sales order (va01).
    With regards

    vamsi krishna wrote:>
    > Dear Friends,
    > Please mail to me how to configure the availability of material based on the shipping conditions?
    > That is when we give the shipping condition in the sales order (va01) for example by air 1 day, by road 5 days and by water 6 days. The system should automatically give the availability of the material based on the shipping conditions we give in the sales order (va01).
    > With regards
    Hi Vamsi,
    Could not understand your query fully.
    See material availability check is carried out for the requested delivery date or else the system proposes one.
    The time you are talking about By Air 1 day and so on is not taken into consideration while carrying out material check for that is transportation time after goods are released from the Plant.
    owever if you need to configure the transportation time you need to go to
    Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define shipping types
    Here you can define shipping types what you said by AIR by Truck or whatever you need.
    To specify the time you need to go to SPRO
    Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define Routes and Stages
    Here you specify the Transit Duration Transit Lead time and so on which will be taken as a input for determining material lead time by that shipping type.
    Hope it helps.
    Post if u need furthur clarifications.
    Request you to reward points if helpful.
    Thanks & regards
    Abhishek Swarup

  • ABC analysis for material based on the volume of sales

    Hi,
    Can we have an option of categorising a material according to the sales volume and generate reports.
    Eg;
    Mat1 -Class A >Rs 100000 of sales
    Mat2 -Class B >Rs 50000 of sales
    Mat3 -Class C >Rs 25000 of sales.
    Awaiting your valuable inputs.
    Regarsd,
    Phani Prasad

    vamsi krishna wrote:>
    > Dear Friends,
    > Please mail to me how to configure the availability of material based on the shipping conditions?
    > That is when we give the shipping condition in the sales order (va01) for example by air 1 day, by road 5 days and by water 6 days. The system should automatically give the availability of the material based on the shipping conditions we give in the sales order (va01).
    > With regards
    Hi Vamsi,
    Could not understand your query fully.
    See material availability check is carried out for the requested delivery date or else the system proposes one.
    The time you are talking about By Air 1 day and so on is not taken into consideration while carrying out material check for that is transportation time after goods are released from the Plant.
    owever if you need to configure the transportation time you need to go to
    Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define shipping types
    Here you can define shipping types what you said by AIR by Truck or whatever you need.
    To specify the time you need to go to SPRO
    Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define Routes and Stages
    Here you specify the Transit Duration Transit Lead time and so on which will be taken as a input for determining material lead time by that shipping type.
    Hope it helps.
    Post if u need furthur clarifications.
    Request you to reward points if helpful.
    Thanks & regards
    Abhishek Swarup

  • Need FM to read classification deatils of a material based on classtype

    Hi All,
    i need FM to read classification deatils of a material based on classtype.
    ex: in mm02 if u enter any material number and enter, we ll see the material and below that class type (description as material class).Based on this class type i need fetch the classification data of a perticular material.
    kindly let me knoa ASAP.
    Thaks
    Sri

    Hello,
    Use the BAPI:
        CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
             EXPORTING
                  OBJECTKEY_IMP   = L_OBJECT " Material Number
                  OBJECTTABLE_IMP = L_OBJECTTABLE " MARA
                  CLASSTYPE_IMP   = L_CLASSTYPE
                  READ_VALUATIONS = 'X'
                  KEYDATE         = SY-DATUM
                  LANGUAGE        = SY-LANGU
             TABLES
                  ALLOCLIST       = L_ALLOC
                  ALLOCVALUESCHAR = L_VALUES_CHAR
                  ALLOCVALUESCURR = L_VALUES_CURR
                  ALLOCVALUESNUM  = L_VALUES_NUM
                  RETURN          = L_RETURN.
    Regards,
    Vasanth

  • Material based sales report

    Experts
    what is the standard report for
    sales report( material based ) for particular period .
    Regards

    Is LIS activated at your end?
    If yes, Use T-Code - MCTC.
    Also refer this path for other Standard Reports:
    SAP Menu - Logistics - Sales and Distribution - Sales Information System - Standard Analyses
    If LIS is not activated, you will go for a Z-Report Development.
    Also check standard report - VF05N, if it suits your requirement.
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Urgent issue REPORT FOR ALL MATERIAL BASED ON STOC TYPE

    Hi
    I want report for based on stock type
    i want to check the stock for all mterial with  stock type "quality inspction"
    i want that type of material documents
    is it possible to see the report
    regards sesidhar

    I CREATE material A...with out seleting QM view
    I create one more material B.... with select QM view
    both r ROH material type..
    when i caeate GR for material A. with stoc type 'QYALITY INSPECTION.. for this material system does not creat quality LOT....
    when i create GR for material B with stock type 'QYALITY INSPECTION.... for this material system created lot..
    but are GR done by 101 movement..
    but i want report for materials which are stock type QI...but does not display Material which r lot created...?
    is it possible..
    regards
    sesidhar

  • Payment for  material based on performance

    Dear Experts and MM Gurus,
    my requirement is explained below.
    1.Material is received and goods receipt is made . initially Payment is made for Excise Duty only.
    2. Material is posted to Stock with out any Value.
    3. Payment of material is based up on performance ,i.e number of heats it can with stand.
    eg: in po mentioned order is for 5000 Heats and cost per heat is 500 rupees. material code and ordered quantity is mentioned with Value . But This Value is used for only Excise Payment. Further invoices are paid based on performance report.
    Part payments are done based on the performance Report i.e number of heats material has acheived.
    how to work on this scenario.
    suggestions / comments are recommended.
    Thanks in advance.
    regards,
    injeti.

    Hi Sp
    the following reports help you for the requirement you asked
    Material Analysis(SIS) - MCTC
    Material Analysis(SIS) - MCTC
    Material Returns-Analysis - MC+M
    Material Analysis- Invoiced Sales - MC+Q
    In these following reports you can enter the material you need and the division and once you execute, sysetem will give the output of that material on the basis of the division
    Reward if useful
    Regards
    Srinath

  • How to calculate the Processing time for material based on its route ?

    Hello experts,
    I would like to calculate the Scheduled in-house production time based on route.
    Actually this is done in the prod. route in tcode CA02. (via menu Extras => scheduling => schedule).
    After getting the schedule table press the 'scheduling results' button I received the Processing time, Setup and teardown time,... Scheduled in-house production time.
    So I'm looking for a function or any tool to use it in report.
    thanks,
    Eli

    hi,
    from routing screen,extras>scheduling>schedule(give a variant name)>scheduling results>update material master.this writes the info in the temp file.use tcode CA96 to update material master.this updates lot size dependent in house production time in work scheduling view of material master and  deletes the lot size independent inhouse prod, time in MRP2 view.this tool gives more accurate results  for your  inhouse prod. time.
    > Hello experts,
    > I would like to calculate the Scheduled in-house
    > production time based on route.
    > Actually this is done in the prod. route in tcode
    > CA02. (via menu Extras => scheduling => schedule).
    > After getting the schedule table press the
    > 'scheduling results' button I received the Processing
    > time, Setup and teardown time,... Scheduled in-house
    > production time.
    > So I'm looking for a function or any tool to use it
    > in report.
    >
    > thanks,
    > Eli

Maybe you are looking for