Material block for sales orders
Hello, people.
How can I block a given material only for inputting sales orders?
Regards,
Adriano Cardoso
hi
with reference to question i wil tel u exact answer.
step1: goto MM02->
enter material -> goto SALES ORG1 tab , in this u have the option called DCHAIN SPECIFICATION STATUS filed --- select the option " sales not allowed".
save the material.
step2: goto img screen
logistic general->material master->setting for key field->data relevant for SD->define sales status
goto order option select B-error.
any doubt please reply i wil tel u
regards
murali
Note: without solving ur answer donot select option like my question is solved option.
Similar Messages
-
Invoiced blocked for sales order (configurable material external procurement )
Hello Expert
Configurable material external procurement
Invoiced blocked because ,"Error reading the material cost estimate for sales order "75501"
Message no. KE292
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate item
000010 of sales order 75501 by reading the corresponding product cost
estimate.
However, no product cost estimate could be found for this sales order
item.
The system accessed product costing for product 10820 using costing
key 002 as defined in the
CO-PA Customizing
settings.
System Response
The system cannot process the document any further.
Procedure
Check your Customizing settings.
Note:We can't run cost estimate and releasing it because it's a configurable material but external procurement. We place a purchse order based on configurable sales orser
Thanks
ParvesHello Declan,
Thanks for your reply. Could you please give me the steps for Maintain the
sales order cost estimate?
Requirement: Customer service receive order with variant configuration product,
then MRP Crete PeReq, convert PO and
send to supplier .Supplier configure the product and direct delivery to
customer. Supplier sends an invoice to us. Then we send invoice to our customer
Thanks
Parves -
Setting up Billing Block for SALE ORDER during Invoice cancellation
Hi,
I have a requirement where in i need to set the billing block(VBAK-FAKSK) while saving Invoice cancellation document. Please suggest some user exit or BADI during Invoice save so that i can set the billing block in sale order header data.
Thanks in Advance,
Raghav
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Jan 12, 2011 2:59 PMHi,
You can try TCode V.00
This transaction when executed will give you the list of all the sales documents blocked for delivery per sales organization. There are various other criteria which might be useful. This transaction will allow you to edit each sales document.
If this is not the one that you want, then perhaps you might have to develop one.
Thanks
Mukund S -
VD05 - Customer master record blocked for sales orders and billing
Hi,
I have a scenario whereby I have blocked a customer master record for sales orders and billing using transaction VD05, but it still allows you to create sales orders and post billing documents.
What is the reason for this?
Regards
GandiHi,
Block the customer for the sales order, delivery and Billing for the specific sales area in vd05
and try out,
Regards
Pradeep BV. -
Customer block for sales orders
Dear SD Gurus,
The client wants for some orders to create for the customer with sales order block
For example customer 100 has sales order block but for sales order type XY00, sales order will be able to be created but for sales order type XY01, it should be able to be created.
How is it possible?
Best regards
John BlackHi,
For this you can create one sales order block under SPRO-IMG-Sales& Distribution-Sales-sales Documents-Define & assign reasons for blocking.
Assign this new block to those document types for which you want to block. Remaining document types can be processeed.
For this in XD05, you have to assign this order block created to the customer master.
100% it will work . Be happy buddy!!!
Rajesh G -
Credit limit Block for Sales Order.
Hi.
when customer will create Sales order, it should get blocked for Credit check.
& customer will realese it with VKM3 transaction for particular document type .
Where will i do the setting?
is it Delivery Block 01-Creit Limit check?
Reg,
AmolHi Amol,
You can gonfigure it from SD > Basic functions > credit management/risk management settings > credit management > define credit group and assign sales doc and delivery doc. addtionally, you need to maintain automatic credit control configuration and maintain it to customer specific from FD32 regarding of its credit control area.
Regards, -
Material block for sale in plant-storage location level
Dear experts,
Please help me how to block a material to sale in plant-storage location level.
Thank you.
Regards,
BadruddozaThe standard sales block (MVKE-VMSTA) in material master is valid for sales organisation / distribution channel combination (VKORG, VTWEG) - this means you cannot do it for Plant / SLoc combination,
What does it mean to block it at plant / sloc level? Generally in SO you do not specify the storage location. Or you are speaking about MRP also? In this case you could use SLoc-MRP (with proper availability check in delivery) for your material but the problem is that a plant might be assigned to several sales area and this SLoc would be hidden for them also.
Could you please specify what would you like to achieve, what sales block means according to you?
Regards,
Csaba -
Customer partner block for Sales order message error
HI Friends,
I am trying to get error message while creating Sales order, for a Partner (ZA) who is blocked in XD05.
I did blocking reasons and assigned it to Sales order type, but while creating sales order i am getting pop up of all ZA partners assigned in Customer master, but while selecting one of blocked customer system doesn't gives any message and allowes me to save the order.
How to get any message or error please suggest.
Regards,
Anil AgrawalHi Friends,
If i am doing same customisation for (SH) Ship tp party it is working but if for any ZA partner it is not can anyone suggest how to do it for ZA also.
Regards,
Anil Agrawal -
Dear All,
When ever two user create sales order with different user ID with same material system shows error that no availability can be carried out. But my user want to to show such message. How to resolve it.Dear Nitesh,
Include-MV45AFZZ
Userexit - USEREXIT_SAVE_DOCUMENT_PREPAR
Ask Technical person to write logic as per your requirement in that Exit
Hope it should help you
Regards,
Seegal -
Problem in changing Billing Block for sale order.
I need to change the Billing block of the particular sale order ,I am using BAPI_SALESORDER_CHANGE and populating sale order and billing block in the respective structure .The billing block is not getting changed.
Thanks
RaviTry to use CRM_STATUS_CHANGE_INTERN if it's system status
and CRM_STATUS_CHANGE_EXTERN if it is user status -
Material consumed for sales order
Hello,
Is there any report to know the consumtion of raw materials for perticular sales order.
According to my knowledge I know the consumtion of raw materials for Production order(coois).
There is a option in COOIS -- sales order, but it's not showing any raw materials consumtion.
NOTE:- Our Business process 1) Va01 -- Sales order, 2) Co01 -- Production order(Manual-- we r not using MRP), 3)MIGO -- Goods Issue, 4) CO11N -- confirmation -- 5) MIGO - Goods Receipt.
w/regards
ramHI Bishwanath,
I checked as you mentioned above, but I am not getting anything.
It's showing "there is no data for the selection".
Pls give me solution for this. it's an client requirement needed urgently.
w/regards
ram -
Retrigerring the delivery block for sales order after change.
Dear All,
I have a scenario, When we are creating FOC order, automatically Delivery Block is
appeared. After an authorised person releases the order, the Delivery is
made against it.
Now if the order is released and any amendment is made in the order, FOC
order should get back the Delivery Block status automatically.
Thanks,
Ani.Hello,
I have a scenario, When we are creating FOC order, automatically Delivery Block is
appeared. After an authorised person releases the order, the Delivery is
made against it. Now if the order is released and any amendment is made in the order, FOC
order should get back the Delivery Block status automatically.
The best option of meeting your requirement is using a User exit which would put a Delivery block when the Sales Order details are changes.
USER EXIT --> USEREXIT_SAVE_DOCUMENT_PREPARE
Kindly try out this exercise with the help of a ABAPer and close this thread if your query is answered.
Regards,
SARTHAK -
Credit block for Slaes Order on Days Basis
Hi SAP Gurus,
As my client requirement want Credit block for sales order with days basis.For example Customer has credit 5000 and 30 days.Even credit value not exceed on 31st day, But sales order has to block .
Please requesting to all kindly needful for me.Hi
Check payment terms in Customer master data, billing tab page. We can define payment terms. And if you want to block the customer use dynamic credit check.
Enter 5,000/- in maximum document value in FD32
For Credit management to be working
1. In def of SD type we need to speciy Automatic credit control in the field " Check Credit Limit"
2. In the defination of corresponding item category we have to check the field "Credit Active".
Award points if it is useful
Anil -
Block material for sales order
Dear All,
there is any transaction code to release the block material(for sales order) with refernce to specific plant.
i can do in CO06 but we can delete one by one.
but i want to delete all blocked material form 2008 to till date.
Regards
ajitActually i have created a numbers of order since 2006 to till date but delivery is still pending.
because of this material is blocked for specific order and i can not create order for particular material because its block,
i have around 100 orders.
i know that we can do through CO06.but i don't want to do one by one.
Regards
ajit -
User exit for Dlvy Block at header for sales order for Companycode & materl
Hi all,
I have a requirement. I need to apply a Delivery Block for all sales orders which fall
In a particualr company code "999" and if they have any configurable material in the item level.
When a Sales Order is generated, during the process of generation, I should
Write a loigc such that, if the sales orders fall in a particlar company code
Say for '999' and if they have a configurable material at item level,
I have to trigger an ABAP Proxy that goes and fetches a Yes/No value from an
External system. Based on this Flag value I h ave to then apply a delivery block for
The order at header level.
So I assume, I should put a logic in some user exit that gets triggered before order is saved.
And in that user exit I have to check if the Company Code of that order is '999' and if it has
Configurable product or not. If it satisfies the 2 conditions, I should, trigger this ABAP Proxy and
Based on the true/False value I have to set Delivery Block or do not set delivery block for the order
At header level.
So I think first I should figure out following things.
1) user exit ..where I should put the code to check conditions and to apply delivery block.
2) write a proxy and trigger that proxy in this user exit.
Coming to first part, which user exit should I use to set delivery block for the order
At header level. And how will I check for company code and config product?
Which variables of the SAP stnd pgm store Company Code and Config product values so that
I can check those variables for that values?
Please suggest and help me with this.
Any help will be highly appreciated.
Regards,
Sam1)go to the main program sapmv45a
include MV45AFZZ ->userexit_move_field_to_vbak
depending on ur conditions ...
keep a break-point in the form userexit_move_field_to_vbak ,and if it stops there Check for vbak-lifsk .
Write a condition to set the deliveryblock that is vbak-lifsk = 'xx'.
2)then regarding your second point ...what is the middle ware used to interact with legacy system
let me know
Maybe you are looking for
-
Configuring scenario to add Sender Party to a message from an IDoc
I want to make sure that when an IDoc is received in the XI system, the message Sender Party is populated. Currently I am trying to do this by associating the IDoc communication channel with a Business Service with a party. I was expecting that this
-
How Can I Combine SMS Messages from Previous Backups?
I have a Blackberry 8900, and I recently switched from the Storm. I made incremental weekly backups, however didn't notice my text messages were being deleted every 30 days and I need to restore/recreate them all on my phone for searching. How can
-
is scheduling only possible with adhoc reports? is there any other type of reports i can schedule?
-
I get the following error when trying to install Adobe AIR on a stand alone machine. How can I get around this? ADOBE AIR---Sorry, an error has occurred An error has occurred while installing AdobeAir. Installations may not be allowed by your adminis
-
hi, I have update statement like Update table_name a set sal = (select sal from sal_table b where a.empno = b.emp_no); when, i run this statement, it takes near by 20 minutes. and upto that time it lock's the table. Is it possible, i r