Material Blocked for Goods reciept during Physical inventory.

Dear All,
We are using Batch management .
While carrying out the Physical inventory, system allows the goods receipt for the materials existing in the physical inventory document,  As the new batch is created during the Goods receipt.
While creating the physical inventory we are putting the posting block and including all the existing batches available at that time.
Can anyone suggest anything so that the goods receipt can be stopped till the time difference is not posted in the system.

Dear Don,
Please explore the "Posting block" and  "Freeze book inventory"
checkbox in transaction MI01 .
Posting block Indicates that no goods movements involving the materials
listed in the physical inventory document can be posted for the duration
of a physical inventory count.
I hope this helps
Regards
V V

Similar Messages

  • How to set movement or transfer block during Physical Inventory

    Hello Team,
    I was wondering if someone could help with how to set
    Material Movement block for the entire plant during physical inventory.
    I will appreciate any input.

    The inventory process in general in equal.
    creating document - printing documents - counting - enter count - (recount) - post difference.
    It is just the step of creating documents which differs between MI01 and MI31.
    MI01 wants that the user to enters the material to be counted manually.
    While in MI31 you have a huge selection screen, that allows you to create inventory documents for several location at the same time, while SAP  takes the materials according to your selection criterias.
    MI31 can be executed to create the documents directly or by batch input, in earlier releases it was only possible thru batch input.

  • System message:Procurement of material&blocked for quality reasons(0006 883

    Hi Greetings!
    I have the following issue.
    I need to make the message "Procurement of material & blocked for quality reasons" as Error message . Message number - 00 06 883.
    This will not allow to create PO , if the "Blocking Function" - 02 "Block Request and Purchase order " is set in the QM info record.
    Even though i ahve set this message as "Error" in the configuration ( Materials Management --> Purchasing --> Define Attributes of System Messages), i am getting only warning message during PO creation.
    Can you please let me know if am missing any setting.
    Gobinathan G

    Dear sir,
    GO to material master of that item go to .. PURCHASING VIEW there is a Plant specific material status chk if that is 01- blocked for production 02- blocked for BOM chk and change it then system will allow you to purchase the parts.
    Kaustubh

  • Set Up Material Block for Invoice Verification

    Hi,
    Please share your experience for customization setting under General settings for material management "Set Up Material Block for Invoice Verification".
    When should we use " Material is bloked at first read" and "Material is blocked when invoice is posted".
    Does it improve MIRO transaction performance if we chnage the setting from " Material is bloked at first read" to "Material is blocked when invoice is posted"?
    Thanks & Regards,
    AG

    Hi,
    Set Up Material Block for Invoice Verification
    Use: -
       In this step, you specify at what point materials are blocked in Invoice Verification:
       o   During the allocation phase, all materials present in the invoice are blocked.
       o   During simulation or posting, materials whose stocks are to be changed are blocked and are read again.
       o   Materials whose stocks are to be changed, are blocked and are read again when you post.
       When you post directly to a material, the given material is blocked immediately in all settings.
    Standard settings: -
    In the standard system, materials are blocked during the allocation phase.
    It is suggested to block materials during allocation phase itself, so that user has not to enter all the details and then get block error at the time of Simulation or Posting. Also it improves the performance since all these transactions need not to be carried out and system informs initially that materials are blocked.
    Also refer SAPNote 210828 - Material blocks in logistics invoice verification

  • Default check on the 'Posting block' check box in the Physical Inventory

    I am looking for a default check on the 'Posting block' check box in the Physical Inventory document for T-code MI01 or MI31. Can anyone help in this?

    Thanks for your reply. Can you send me the detail process how to do it through Transaction Variant.
    Regards,
    Tt

  • Transaction code for mass creation of physical Inventory document

    what is the transaction code for mass creation of physical Inventory document.

    MI31 is the transaction to create hundreds of physical inventory documents for annual inventory at a time.
    MICN can create several documents at a time for cycle count.
    Just look in the menu of phyiscal inventory into the knot Sessions, there are even more e.g. for counting of own stock a customer and vendor location, for vendor stock at own location etc.

  • Material Block For Procurement

    Hi Experts,
    Here we have one requirement to block material for procurement only.
    Stock at Plant should be process in normal for issue and consumption .
    In MRP 1 view i tried with Plant-sp.matl status as 01 but it block the material for procurement as well warehose movements too.
    It is very urgent.
    Thanks in advance
    Chetan Mistry

    Dear Vishal,
    There is only three types are there as below
    01     Blocked for procment/whse
    02     Blocked for task list/BOM
    99     Complete Block
    How can i config new option for material block for payment only.
    Thanks
    Chetan Mistry

  • SAP Standard script name for Goods reciept.

    SAP Standard script name for Goods reciept.

    Check this,it may help u
    Program:SAPM07DR
    Form: WESCHEINVERS3
    Regards

  • BAPI for goods reciept posting

    Hi,
         Can Any one provide me BAPI for goods reciept posting.
    Thanks.
    Moderator message: please try finding out yourself before asking.
    locked by: Thomas Zloch on Aug 17, 2010 10:55 AM

    HI,
         Have a look at
    BAPI_GOODSMVT_CREATE
    BAPI_ACC_GOODS_MOVEMENT_CHECK
    BAPI_ACC_GOODS_MOVEMENT_POST
    Regards,
    S.Velsankar
    Moderator message: please do not encourage laziness by replying to such questions!
    Edited by: Thomas Zloch on Aug 17, 2010 11:00 AM

  • Locking material movments during Physical Inventory

    Hi !!
        I went thru certain blogs on PI process but couldnt find mention of the Transaction code by which we can lock material movements posting during PI cycle .
    Please let me know how we can lock these movements  during PI cycle at a plant or storage location or material level or a combination of either of them .
    Regards

    HI
    Ramakrishna is correct, when u create material document for PI only there is check box you block those materials for further transactions untill PI is complete there is no seperate T-CODE to block materials while PI.
    Regards

  • Unblock Bins/Material during physical inventory

    Guys ,
                 Can anyone suggest me the necessary config to be maintained to make the unblock everytime even when a physical inventory document is created and inventory count is not completed ,.
    Thanks

    Hi
    If you want to unblock bins I assume you are talking about WM
    I do not think what you want to do is possible or advisable.
    In WM you cannot freeze the book inventory as you do in Imand so therefore the way to protect the integrity of the stock in the bins whilst it is being counted is to block them as WM does when an inventory count is activated.
    You could either create a count doc and save it but DO NOT activate it until you are ready to count it (this can be done in LX22) the block only occurs when the count is actually activated, alternatively delete the count document or finally complete the count
    I hope that this helps

  • Freeze inventory during Physical Inventory

    Hi,
    I am creating a physical inventory document with  'Freeze book inv. bal.' ticked in MI01. After document gets created,  I am expecting that the Physical inventory block field in material master is set to 'A' . However in my system it sets it to 'X' which then makes the inventory movement is not allowed even though I did not tick the 'Posting block'
    Is there any set up that I need to do to make the tick on Freeze book inv balance during MI01 to result in Physical Inventory Blcok field = A in material master
    Thank you.

    Hi,
    SPRO --> Material mnagemnet --> Inventory managemnet and phy Inventory --> physical Inventory --> Allow Freezing of Book Inventory Balance in Storage Location
    Check the check Box for store in the plant.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Outbound IDOC for Goods Reciepts (MBGMCR01)

    Hi All,
    We need to send outbound idoc for goods movement GR (Basic idoc type- MBGMCR01), the problem is how to trigger that idoc, through output type or is there any other way to do it,
    If it is through output type what all settings we need to configure for this.
    Thanks in Advance
    Regards
    Shazia

    Hi Shazia,
    Speaking in terms of EDI Idocs, system is not prepared for send Goods Receipts because normally is an incoming message not the opposite. All the output messages you can find are for printing purposes.
    So you need to configure everything for Output Determination and create a new function module to capture NAST message determination, retreive GR data, populate the Idoc and distribute it. Finally you have to create output process code, partner profile, port, rfc, distribution model, etc. etc.
    Your starting point is next IMG activities to configure new output type for EDI medium for application ME: Material Management>Invetory management and Physical inventory>Output Determination.
    Reward points if useful
    Roger

  • Fields For Good Reciept and Issed !

    Hi all,
    I want the fields for the goods reciept and good issued for getting the stock for a particular material as on to date (which is my selection screen) ...
    I have selected the sales data from the VBRK and VBRP tables which is for sales information and now i need to find out the Stock information. My Requirement is to maintain sales stock and to show the Turn Over Ratio ???
    Can you tell me the tables and the fields where i will get them ...
    I m calculating my Stock as:
    Stock (as on date) = Substracted Value (Reciepts - issues ) - current stock.

    In MSEG there is field for Sales order number as well as item number from that you can get the Goods issues quantity,similarly in MSEG you also have purchase order number and purchase order item numner from which you can get the goods purchased quantity by passing it to VBAP and EKPO respectively.
    Regards
    Mohamed Mansoor
    Message was edited by:
            Mohamed Mansoor Kasim

  • Btach determination during Physical inventory

    Hi Gurus,
    Just wanted to know that while carrying out Physical Inventory, batches are getting automatically determined when i am creating the document and later viewing it.
    Can it be elaborated?
    Regards,
    SS

    SAP searches for any batch for this material in the same storage location  that has stock and is not counted in the current fiscal year.
    with settings in the selection screen, you can even control to include batches of the same material and storage location that have zero stock
    and you can control to include even already counted batches to be counted again.

Maybe you are looking for

  • Performance problem with recordset object

    Hi, I have a performance problem with record set object. Is it true using RecordSet object as argument to the method will cause any perfomance degradation? here is my code. finStmtList = selectFinancialStatements(rs, shortFormat, latestOnly, true); I

  • HA Solution with J2EE and ABAP Stack

    In the Planning Guide is written that if DB2 data sharing is used, each application server connects to only one database server at any one time. There is a mechanism called sysplex failover that automatically redirects an application server to anothe

  • Assign string into variable

    Hi All! I''ve created global and lоcal variable with type - string How can I assign the value into variable in BR? I tried [Var_1] = "qwe"; or [Var_1] = @CONCATENATE (String_1, String_2) it doesn't work Regards Sasha

  • CanoScan Lide 70 and Twain 64-bit plugin

    Is there a downladable Twain driver which is 64-bit, for using CanoScan Lide70 in Photoshop CS6?

  • Update OS X 10.8.4

    after the last update (10.8.4) the performance of my macbook air mid 2012 has worsened. it's always hot and safari is to slow. in addition I can no longer see the external devices in the finder window (USB key, external HDD), although it is specified