Material BOM mass change error

Hi gurus,
When doing mass change of BOM via tcode CS20, i'm getting below error result.
The following messages were displayed:
Material BOM 00016478 : Delete Item(s)
   19760                                  STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
   0130 L 01/01/2002 12/31/9999              1.00 PC     >               1.00 PC
   No batch input data for screen SAPLSDDT 0010
   Folder created/extended
I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
Hope to hear advise from you all on how to deal with this.
Thanks and regards,
Chad

Dear,
Error message no is 00344 ?
Please refer the OSS note Note 493096 - CS20: No batch input data for screen SAPLCSDI and Note 180686 - For CS20
Regards,
R.Brahmankar

Similar Messages

Can't quey by Bom mass change No after implementing it.

when running Bom mass change , i cant query by its number ..is that acceptable ??

See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help.

Item range in BOM mass change

Does anyone know the criteria (item_id,creation_date,etc) by which Oracle interprets the Items from a given item range in BOM Mass change.

Purely alpha-numeric.
-Gerry

Material Master Mass Change

Hi Experts,
PLease explain me abt the mass change of Material Master.. the detailed steps to be followed for the change
I know the tcode MM17, please explain the process in that transaction

You also have tcode MASS for more mass modification.
Use object type BUS1001 and generate. Then you have to know the tables where the field you want to modify is.
Pick the fields in their folder and generate again. Then in selection pick the materials or use other selection criteria. Generate again.
In the upper side of the screen insert the data and click the button 'carry out a mass change'.
Save and leave.
Regards

FBL5 mass change error

Hello,
I am using t-code FBL5 to update the payment method to 'I' and want to set the Part bank type to use a specific bank account. I get an error that Field 'BSEG-BVTYP. does not exist in the screen SAPMF05L 1301' Mass change uses bdc to call FD02. When I go into FD02 to the additional data screen, the fields indeed does not show up (the field is on the screen but set to invisible).
Any ideas what needs to change to get this field to show up? Is this config or a program error/
thanks!
Brent

Are you sure you are changing the correct line item in this case?
Sorry - I was thinking of another transaction.
Rob
Message was edited by:
Rob Burbank

OCL 4.5.1: Mass Changes; error received when creating CDS

I receive the following error when attempting to create a Response Mass Change with the following criteria:
QG Name: XX
Question Name: YY (Single CHAR variable with default text, only one question specified)
Criteria:
Response, (<XX.YY$F> like '%±%')
Error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "RXC.RXCMCMCS", line 30
ORA-06512: at "RXC.RXCMCCRTCDS, line 1107
ORA-06512: at "RXC.RXCMCCRTCDS, line 1477
Any help is greatly appreciated.

Thanks Satish,
It seemed that this problem was going to go away on its own as we ceased to need the mass change. However, it has arisen again.
I have no problem creating a like set of criteria using responses. It is only when the special character is included in the filter that the error appears. It is somewhat odd as the character renders correctly in other areas of the interface, however, I begin to wonder if isn't still fundamentally a characterset issue.
Despite the efficiency of using the special character in the sql statement, I think I will need to simply define the change in another, probably more laborious manner to correct the problem.
Any further ideas are welcome.
Thanks again,
JK

Material to Material transfer - Mass Change

We have several items in stock which are semi finished material (HALB).We want to convert the same into Semi Finished.
We can do the transfer of the same thru T.Code MB1B and movement type 309.However, in such a scenario we can transfer only one by one material.
Can u pl guide me what to do if we want to transfer in mass from one material type to another.
With Rgds.,
Rakesh Kumar

Hi Rakesh,
there is no standard tranascation for this requirement,
you need to create BDC program or LSMW
pls refer below link for sample BDC program and details
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/program-loads-the-bill-of-material.htm
Regards,
Sankaran

Mass change of Vendor Line Items Payment Terms

Hi all
We are trying to make a mass change of payment terms for vendor line items. We have implemented the change required as per SAP note 640908. However when we try to do this not all payment terms are changed.
The log gives us the following error - 'Field BSEG-ZTERM. does not exist in the screen SAPMF05L 1302'.
Please how can we solve this error.
Many thanks
PRG

Hi,
According to note 640908:
" Notes on error handling:
    If the mass change does not occur as required even though you
    changed and activated all program parts, note that the error log
    for the mass change (Environment -> Mass change -> Error log of
    line item list) may contain useful information for error
    handling."
" Note: SAP cannot guarantee that the modified mass change will work
correctly even if you carry out all of the steps as described in the
manual tasks."
It is not planned to enter the payment terms by using of
the field payment term ZTERM but by using of the fields ZBD1T/ZBD1P and
ZBD2T/ZBD2P and ZBD3T.
With Best Regards,
Gladys Xing

Mass change in BOM - field "Relevant to sales"

Hi All,
How to do Mass change in BOM for the field "Relevant to sales" ?
Thanks.
Marianna

Hi,
Need to use CS02 recording in such a way that you can change every item in a particular BOM.
e.g. First get into HEader Material BOM (CS02), once you've General Item Overview screen, do NOT directly go to item details of any item.... first click on tab-'Position', enter either Item Number or Component or both and then go to item details to change the relevancy indicator. Once changed for a particular item, save the BOM & come out of it. Then try for next item & so on....
Again this is my initial thought, you need to try out few recording options like this and then chose the most suitable one. Take help from ABAP expert if any available.
Off-course, initiallly it would take time to set-up LSMW but later on just need to create a data-file & do the mass changes.
Hope it will help.
Regards,
Anup

Mass change in collective BOM's

Hello Experts,
I want to change the quantity of a single material in several BOM's already created in the system, there are atlest 2000 BOM's having the same qty of that material which i want to change.
I had a look to the MASS change option in the system but i was not able to resolve my problem.
Please Help.
Regards
Prashant

Hi,
Please try transaction CS20.
If resloved then let me know.
Regards,
Jigar

BOM sloc mass change

Hi Friends
In the BOMs for the components we want to change storage location.
There are so may BOMS in the plant,
How can we change in mass.
Regards,
srihari.M

Hi,
First create Working area with focus as BOM Items in OP77.
Then CEWB select the area you have created and give the list of material you want to change (in additional selection criteria) and execute. In material Planning Tab change the SLoc.
Also check the below link
[Changing the production storage location;
Regards
Vinod

Mass changes of BOM with ECM

Hi
I wanted to change into BOM by Cs20 Mass changes into BOM with ECR Number which is created throgh CC31 .
but system is not allowing me to do the same , pl tell me where is GAP.
Rgds
Pankaj Agarwal
Edited by: Csaba Szommer on Dec 28, 2011 10:43 PM

Hi Mario
For ECR i have done the same and even that is Released and also Status with ECO. but still System is showing the same.
Mario one more thing i have written on SDN pl have a look on Followup material , i have read about your post MRP-MPN.
we are also having the scenario of alternate Material Within the Bom and also wnat to be correct the Procurement Proposal.
how it will be helpfull by the MPN-MRP Set function. i am also searching the same thing into Follow up Material . pl have a look on that.
yours reply will be highly appericiable...
Rgds
Pankaj Agarwal

CEWB: BOM item Mass change new value Missing

Hi Guru's
When i plan to do BOM item lead time offset mass change in the (CEWB) Engineering Workbench,
i have selected the ITem and Column LT offset, and in entra when i select the mass change, system showing a error.
" no item selected", (new value and replace indicator is missing
.Can u help whether we need to apply any notes ?
Regards
GS
Edited by: GNANASEKARAN Suresh on Aug 1, 2011 4:40 AM
Edited by: GNANASEKARAN Suresh on Aug 1, 2011 4:51 AM

Upload screenshots of the step which you're taking in CEWB & the error you notice to some portal & paste the link here for a clear understanding.
Also which version of SAP you're working on & what is the support pack level ? (If you're not sure about it, then check with your system admin for the same).

Mass change of BOM item and BOM item catergory

Hello Everyone,
I have a need to complete a mass change of a BOM item with another, usually I use transaction CS20,this works o.k. but this time I'm also changing the material with a new item catergory, for example a stock item with a phantom item.
Does anyone have an idea how to complete this task.
Kind Regards
Frankie

Hello,
Thankyou very much for your reply.
I did try adding the new material using CS20 but all the BOM qty's are different and as you know you have to complete this field, so it would mean changing one at a time, I attacked this issue from a different angle and created an LSMW so I can Mass delete the parts but then use this program to change the BOM item to the new part.
Thanks again for your reply
Kind Regards
Frankie

Sales Order Material and its MOQ mass change

*The issue is related to our Spare parts Ordering process in our company.*
We have a concept of having 65 days of back orders. Hence there will be
lot many open orders in the system.
The Material code will be changed from (for eg) M01 to M02. Hence forth the Material (M01) ordered will
automatically changed to M02 through Material determination logic. But
for the 65 days back orders, it is very difficult to change the
material one by one in sales order. There may be more than 100 orders
for a material. Even if the MASS change option in Transaction VA05
doesn't address because of the following reasons;
1. The changed new material (M02) may have new price with new validity
periods, whereas the back orders will have old pricing dates. Its
difficult to change individually in the open orders.
2. Some materials may have partially delivered.
Similar to ECM changes, there will be MOQ changes which also needs to
be changed individually the order quantity in the old Open orders.
For example,
Initially the MOQ for a material in 10. Order inflow has happened based
on this MOQ.
Now if the MOQ is changed to 20, future orders are addressed. But for
the 65 day back orders, we need to manually open the individual sales
order and change the order quantity.
Hence we require a mass change option for the open orders as below:
1. For Material Changes (M01 to M02), I will give the list of orders and
the line items and Qty for M01. The program should reject the existing
line item for M01. An additional line item should be created with M02.
Also the pricing date should be changed.
2. For MOQ changes, I will give the list of orders and the line items
and Qty. The program should reject the existing line item for those
materials. An additional line item should be created with new Qty.
If the material is partially delivered, the the existing qty should be
updated to the extent it is delivered and the remaining qty should be
updated with new material or New MOQ.

You can use BAPI_SALESORDER_CHANGE.
1. Get the SO detail using BAPISDORDER_GETDETAILEDLIST.
2. MODIFY the ORDER_CFGS_* internal tables and update.
        CALL FUNCTION 'BAPISDORDER_GETDETAILEDLIST'
          TABLES
            order_cfgs_value   = gt_char
            order_cfgs_ref       = gt_char_ref
            order_cfgs_inst      = gt_char_ins.
        MODIFY gt_cfgs_*.
        CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
         TABLES
            order_cfgs_value   = gt_char
            order_cfgs_ref       = gt_char_ref
            order_cfgs_inst      = gt_char_ins.
Refer SAP note 549563.

Material BOM mass change error

Similar Messages

Maybe you are looking for