Material booking in pm order -reg
Hi Gurus,
While making material booking in iw32->components tab,the following error appears;
Entry does not exist - check your entry - Error : 0058.
But the matcode is present in the respective plant.so what is the setings to be done to capture the matcode in
components tab.
Thanks in advance.
prabu
Hi,
[SAP Note 840850|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=840850]
[SAP Note 708266|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=708266]
[SAP Note 921751|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=921751]
All are with same message 0058. Please check all the notes.
Regards,
Maheswaran.
Edited by: Maheswaran.K on Jun 21, 2011 6:55 AM
Similar Messages
-
To book a production-order as finish
Hi,
I have the problem that that our (obsolete)production-orders still appears
in the dispo-list!
Now I read, that the Controlling have to "book" the production order as
finished (or similar else).
In which transaction-code(CO) can I book orders as "finished"!Hello
Check
Scheduling margin key
The float before production, float after production and the relea se period are defined in the scheduling margin key (Customizing for Shop Floor Control, by choosing Operations ® Scheduling ® Define Scheduling Margin Key) . The scheduling margin key is assigned to the material ( MRP area in the material master) and is transferred when the production order is created. These values can be changed in the production order.
When is an order scheduled?
When you create a production order it is always automatically scheduled. In the scheduling parameters (Customizing for Shop Floor Control by choosing Operations ® Scheduling ® Define Scheduling Parameters) you can define that, after every change relevant to scheduling, the production order is also automatically rescheduled before saving ( Automatic scheduling indicator) .
reg -
Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.
Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise. -
How can I print a pages document in book format ..order?
How can I print a pages document in book format ..order?
This is usually a function of the driver you're using. Have you looked in the various PDEs for black and white or grayscale? What kind of printer are you using?
-
Raw Material Consumption to Process Orders
Hi Friends,
I need help with changing the way how we consume raw materials in our manufacturing organization.
Current Process:
A. Receive product A in Warehouse, movement type 101. Debit Inventory Account, and Credit GR/IR.
B. Move product A to a storage location (out of Warehouseu2019s custody). Movement type 311. No impact to P&L, as no accounting entries.
C. Consume product A in a u2018Process Orderu2019 from that storage location 311. Debit Consumption Account, and Credit Inventory Account.
Product A is listed in Bill of Materials and has to be issued to process orders for final consumption u2013 to give production variance as we are on standard costing system.
Desired Process:
We want to have stronger controls in our organization. We want to hit P&L in step B, as soon as Warehouse issues items out. This can be done using movement type 201 GI for Cost Center.
But we also desire to see final consumption happening in process orders, as all our BOMs and standard costs account for the consumption of product A.
Please advice how do we issue items to a process order that have already been issued to a Cost Center. What is it that I am missing?
Thanks,
Meet AI believe we will stick with our current process. See Ajay's reply on the link below:
Raw Material Consumption to Process Orders
Thanks and regards,
Meet A. -
How to check the analysis of material determination in sales order
hi,
We are trying to create a sale order with material determination. Material determination analysis is on. After switching this on while adding a new line item, in an existing sales order, we are able to do analysis as the system itself takes us to analysis screen. But once the document is saved, we need analysis to be done at material determination for the determined materials , something similar to pricing or account determination analysis.Please help
Regards,
Aparna.Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore -
How to change the status of material while creating sales order via BDC
Hai.
In BDC while creating sales order( va01 posting ) it is stucking up in middle saying material is new. I.e Sales order (va01) is not getting created because of material status is new . I want to create sales order (va01) even material status is new.
pls give me out the solution. Points will be rewarded.
thanks & regards,
sami.Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore -
How to block material issuing after sales order invoiced?
As the subject mentioned, could be a possible to block material issuing since sales order invoiced, or
in the another words, after the sales order completed?
Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
forbidden?
Thanks in advanced,
Zhou ZhenDear Friend
A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
That means the order 10000 is closed
Case 1
Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
Case2
But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
But you can test it if it throws any warning message we can try to convert that error
But in case 2 it is not happening(even warning is not there)
Regards
Raja -
How to change material discription at sales order item level ?
Dear Gurus,
We have some requirement need to change material description at sales order item level , but in system it is in disable mode how to change that into change mode in sales order item level?
Thanks in advance
Regards
VenkatNot possible in SAP Standard.
Instead why not create a Customer Material Info Record in T-Code - VD51?
Alternatively it the requirement to change the Description is only for few Sales Order then create a Text ID & Enter the Description in Text Feild. Then in Smartform program wrie a code which will check for Material Description in the Text first & if not found then take from normal material Description in Sales Order.
But Customer Material info Record seems to be the best solution.
Hope this helps,
Thanks,
Jignesh Mehta -
How to restrict the entry of same material twice on the order
HI,
How to restrict the entry of same material twice on the order before saving the Order ?
I do not want my users to enter the same material as two different line items in the order.
Any inputs wud b appreciatedHi Vam,
For this you need to take the help of an ABAPer . Ask him to modify the user exit and add the logic.
For user exit please go through the below link it will help you to resolve your issue.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Regards,
Krishna O
Edited by: Krishna O on Jun 3, 2010 12:29 PM -
Configurable material - Error converting plan order to production order CO6
While I am coverting planned order to production order with configurable material, I am getting the follwoing error:
You cannot make an assignment to make-to-order stock
Message no. CO684
As read in previous forum messages I am check settlement profile assigned for new order type (ZSD01) with standard sett profile (SD1) at OKO7 and set "Valid receivers" with value "1" in Order, Material, Profit.segment, Sales order and Order item.
Configurable material have item category group "0002", MRP type "PD", Lot size "EX", Strategy group "25" and "Individual requirements".
Sales order with configurable materiale have item category "TAC".
Where is the problem?
Thank you in advance
OscarHi,
There are some OSS Notes to address this problem..(OSS Note: 311651, 432109 etc..)
But all ae for older versions of SAP.
Regards,
Siva -
How can I sort all my books into title order?
Hi
I'm familiar with how to search for book titles but it would be helpful if I could list all my books in alphabetical order. Does anyone know how to do this please?
Many thanks
RathiSee http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
You can look at this extension:
* SortPlaces: https://addons.mozilla.org/firefox/addon/9275 -
Function to find quantity of a material in Open sales Order in 4.5
hi ,
is there any function to find the total quantity of a material in open sales order for an input date in 4.5
RegardsI think you may find function <b>RV_BILLING_PRINT_VIEW</b> helpful. This is the function used by the standard SAP report <b>RVADIN01</b> to assemble all the information needed to print a Sales Order. The structure and table output by this function contain all the information in the header and line items of the Sales Order.
To watch this function in action, set a break point on this function (line 1075 of RVADIN01 in my system) and print a Sales Order (SO).
I use VF31 to print an arbitrary SO during testing.
Your company may have altered the standard print configuration for sales orders in SAP. If so, you will need to note the output type of your test Sales Order in VF31 and use Transaction <b>V/83</b> to determine which program is being used to print that type of SO. -
Capture u201CInstallation Chargesu201D of a material sold in Sales Order
Hi SD Gurus,
We have requirement to capture u201CInstallation Chargesu201D of a material sold in Sales Order. The charges are quantity based and shall be shown separately in sale order & invoice. This charge shall be treated as additional revenue (with separate revenue G/L Account) and shall be maintained as optional. If included as a condition type, we do not want the item totals of the materials to be affected by this condition.
In the existing pricing procedure, the material price field is made mandatory. We tried to enter it as a service line item and entered the u201CInstallation Chargesu201D with a new condition type with new revenue G/L Account. But it insists for a price for the material due the mentioned configuration.
Request your valuable suggestion in achieving this requirement.
Regards,
VikrantHi,
You can achieve this functionality using the Bill of Material concept.
Create the material and its BOM. In the BOM, include the main material and the service. (Case A)
Also maintain an alternative BOM for the same material, the BOM being the material itself and nothing else. (CaseB)
Make the parent item relevant for pricing and child items not relevant for pricing
In sales order, give the main material, so the sales material and service will come.
In Case A, maintain a condition type with a reqmt routine saying that the condition will be valid only if the BOM contains the service item. Maintain the condition record. So, if the BOM contains the material and its service, this condition type will come else it will not come.
If you don't want to charge the service, replace the BOM of case A with the alternative BOM maintained for the material to go to case B.In case B, this extra condition type will not come. Hence only the price of the main material will come.
Hope this helps u -
Change material code in process order or delete process order
Hi experts,
While creating a process order in COR1 transaction code, wrong material code was entered.
Can we change the material code in process order. If not, what is the complete procedure to cancel or delete the process order.
Request you to revert.
Thanks in Advance.
Regards,
Farha.Dear ,
One the Process Order has been created with any material either it is wrong code or correct code , it can not be deleted .If it wrong code , then do not perfom goods Issue -MIGO-261 or through Backflash and also operation confirmation etc .
If Goods Issue , Confirmation happend then you need to reverse those txn once again .
In that case the best oiption will be goto COR2-Enter the Process Order -Select Process Order from Header -Restrict Processing -Choose Technically Complete .
Now , once you did TECO , then there will not be any farther txanationl posting like Goods Issue , confirmation will not be possible .Likewise , you can also Lock or make set CLOSE from COR2 in case there is no WIP , Variance .
Hope this is clear
Regards
JH
Maybe you are looking for
-
Itunes will not recognize my ipod nano
i plug my ipod nano into my computer and itunes pops up and tells me it has detected an ipod (which is not visible on the left side tab) and tells me there is a problem. It told me to connect my ipod again and try again. I did. It did not work. the s
-
I currently have a mbp 2.3 gighuz intel core 7 16 gig of ram with two internal hard drives ( took super drive out) which for a video editor like myself is a dream I can edit video anywhere, my question can I order a new mbp with 2 internal flash driv
-
Hello if anyone could help?? Ok, have a new i pod nano and everthing works fine. However downloaded a music video through I tunes store that is sitting in my I Tunes library. However when I go to synch it to the player an error icon appears (round
-
Hello Friends, I have a doubt in creating job schedule. I created a stored proecedure for a particular process and i would like to execute that sp every 5 secs. i created a job scheduler and submitted that but could not able to run that. Can anyone t
-
Cannot open pdf files after installing app
I have installed the adobe reader app on my tablet but when I try to open a pdf file it downloads and when I try to open it from my downloads it says cannot open file. Please help!