Material can only be use once on Purchase order

Dear SAPfans,
can we set the material only be use once in purchase order and cannot use for the second time in one plant?

hi Nizam,
If I am not wrong then you mean to say in 1 PO for one plant material should be entered once only
like say you have plant A and plant B and Material XYZ so in po material should be entered as
XYZ         Plant A
XYZ         Plant B
and it should not happen like
XYZ         Plant A
XYZ         Plant B
XYZ         Plant A
XYZ         Plant B
right????
As far as i know this is not possible we can not restrict this

Similar Messages

I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its sasy the cose can only be used once. I dont have the movie and now i cant get it at all.

I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its says the code can only be used once. I dont have the movie and now i cant get it at all. i paid for it when i bought the movie but now i dont own it at all. i feel cheated, somebody please help!

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Condition type PR00 can only be used once

Hi Experts,
Im faced with a strange problem. Request your help in resolving it.
I tried to create my own pricing procedure by copying from RVAA01. Then i deleted all the steps and created my own steps. But when im trying to save the document, it says PR00 can only be used once. I deleted this condition type and tried to save it, it again says K004 can only be used once. Even after deleting all the earlier conditions which i copied from RVAA01, why am i getting this error.
Your help is most appreciated.
Warm regards,
Sarat.

You have deleted a row (i.e. condition type, say PR00).
After that click icon "Save".
Then when you create condition type PR00, system shall accept it.
Currently, you are deleting a condition type (PR00) but it is still "in memory" of the pricing procedure. You can not create the same condition type more than once in a pricing procedure. Therefore you can not create PR00 again & you are getting the error message.
First remove PR00 from the memory of the pricing procedure by clicking "Save", & then you can re-enter the same cond type.

Alternatives can only be used once?

Hi
In the Adobe form when creating an alternative I've discovered that it can only be used once.
Is this correct?
I've created an alternative e.g. name = FLAG_IS_X condition flag = X.
When I use the alternative 'FLAG_IS_X' the first time it works as required.
However, when I use it a second time on the form it does not work at all.
Does this mean that a different alternative with the same condition has to be created even though the condition you want to use is the same?
Thanks

Hey,
Well I stumble it seems on the same 'issue' . I have 3 master pages and have the requirement to put a watermark on it depending on the status. The first master is in portrait and contains the contact details, the second master page contains the line items and is in landscape and the third one contains the totals and is back portrait.
First I had only one alternative and used it on the 3 masterpage to check if the watermark had to be printed. In this case it was only correct for the first page (contact-info) the rest all received the mark although they should not.
Then I made 3 altenatives (one for each type of master page) all checking the same condition.
This way it was correct for page 1 (contacts), the first page of the items (the two others had the watermark although they should not - so not correct) and the last page with the totals.
In my case the contacts-page and totals-page can only have a page-count of 1 but I'm almost sure that if they could have a page count of 2 or more then only the first page would be correctly printed.
Is this a bug you think?
Faaiez,
Did you find in the end a workaround for this?
Otto.
Any suggestion of how I could handle this with scripting (no experience with scripting though)
Anyway tnx already for all the input !!
best regards,
Bart V.

Survey portlets that can only be used once

All, I would like to create a survey portlet (or use an existing one) to do the following:
1) A user could define the criteria of the survey through a simple interface (i.e. data form)
2) The end user would see the survey on their default home page (this part is pretty simple).
3) Once the user responds to the survey, the survey portlet is replaced on the users home page by the results of the survey and the user can no longer respond to the survey (enforce a "respond-once" policy).
Questions: Does a portlet like this already exist? If so, where can I find it? If not, what is the easiest solution for creating this type of functionality?
Thanks,
Jon.

Hello, Not sure if this functionality already exists or not, but what you can try doing is this.
1. create a group with all users who are to take the survey
2. set permissions on the survey portlet to only allow people in this group to take the survey
3. With the assumption that you're dumping this data to a database table, create a trigger that will remove the user from the group when the user does a submit. (you can get the current user using portal.wwctx_api.get_user in the trigger). I can not think of it right now, but there are api's which you can call to remove a user from a group.
I hope this helps.

Solution to buttons only being used once?

Howdy.
I've been using Captivate 4 for several E-Learning type (10 x 50page) modules recently and have hit a rather hefty wall of frustration.
- I have several interactive sections within a Captivate module and several slides have clickable areas and text entry boxes in them.
- I have a very basic navigation image button sitting at the bottom right hand corner of the screen for 'next slide'
(and for the most part this is all thats needed)
- However, there are several slides where multiple actions must take place to proceed to the next slide, and I would like the users to 'scan' through these steps if they wanted by using the button sitting at the bottom right hand corner. Unfortunatley I have found that if I have the image button set to 'Continue' it will proceed to the need action, text-entry, click box etc (which is what I want) but the button can only be used once, meaning they can't 'Continue' passed and onto the next interaction, but the next slide (Not what I want) and therefore skipping several steps.
Is this 'one-time only' button usage a normal function ? (or one that can be altered ?)
Skipping through several steps smoothly on the one slide via image button would be Extremely helpful to this module! It seems that placing many copies of the same button at each interval might have been a solution, but it wasn't (and also an extreme pain in the A.)
Has anyone had solutions to a similar issue ? (the best I could come up with was 'Going Home')
I get the feeling there is a simple solution hiding around the corner (please prove me right!)
Any help would be most appreciated.
CP.

Hi there
In addition to what Lilybiri offered, here is another thought.
All interactive objects such as Click Boxes, Buttons, Text Entry Boxes and Question Slides will normally Pause playback until the end user interacts with them. Then they normally follow whatever action has been assigned to them.
I might suggest setting the pause point very late in the slide time for your button. Either that or configure it so it isn't even available to be clicked until after the user has interacted with the last element. Then make the Button available. Before then you could insert a dimmed or "grayed out" button in its place as an image to indicate it's there, but not active.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Can only open firefox once, have to restart to open more than one browser. can't upload any pictures the box doesn't pop up, my browser settings are diff now

Firefox just changed out of nowhere. I can only open firefox once... I used to have atleast 2 browsers up using them both on different sites, but now I can't have but one firefox browser up (not tabs, but firefox pages) Also when I am trying to upload images on ebay or any other site nothing happens... nothing pops up. I click it over and over and nothing even pops up. This is exactly what happens with the firefox browser in my first question... I can click the firefox icon a million times and nothing comes up. My tabs are all gone and it doesn't show anything like I had before this all changed? Did I reset everything some how? I do not recall clicking anything to go back... I do remember clicking an update because it kept poping up so I did it and that is the last thing I remember before this happened! UGHHH!

As I asked previously are you able to have tabs open as a window by using the right clicking option ?
When you close Firefox you should use
*'''Firefox button -> File -> Exit '''
Are you doing that ?
I suspect what may be happening is Firefox is hanging as it closes down.
* see [[Firefox hangs or is not responding - How to fix#w_firefox-hangs-when-you-quit-it]]_firefox-hangs-when-you-quit-it
* this explains how to check & if necessary kill the process [["Firefox is already running but is not responding" error message - How to fix it#w_end-firefox-processes]]_end-firefox-processes
A related possible problem is that you may have built up many copies of the restore files. These are stored in the Firefox profile. The easiest method of finding the profile location istouse
*use '''Firefox button -> Help -> Troubleshooting Information <br /> -> [Show Folder]'''
*see [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
You need to look for the files ''sessionstore.js'' and numbered duplicates of that. Delete them.
* see http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files

Item category S can only be used with account assignment category

Hello Gurus,
When i tried to create a PO then error "Item category S can only be used with account assignment category" is coming
for my plant and material.
Could you please tell me where i have to maintain the setting of account assignement for a plant or material.
In TA:-OMG0 item catergory S is maintained for a account assignement F but still this issue is coming.
I think there is a problem in plant or a material.
Please help me.
BR

Hi,
How you are creating PO ,so that you have error "Item category S can only be used with account assignment category"
Check what t.code used for your PO creation and what document type used for your PO creation- which result defaulting item category S which in turn asking for with account assignment category.
Cross check transaction variant or screen variant used for your PO creation!
Regards,
Biju K

HT1420 I've had two laptops die within the last seven months. Last time I had to deauthorize all five and re-up; now I need to do it again but I understand it can only be done once every 12 months. Is there any other way to just deauthorize the ones that

I've had two lapstops die within the last seven months. Last time I had to "deauthorize" all five computers, then re-up, since I couldn't deauthorize from the dead laptop. Now I need to go through it all again, but I understand that this can only be done once every 12 months. What else can I do? Can I get into the account and just deauhorize the dead computer?

You can try contacting Apple and explain that you have been using Windows PCs that last only a few months before failing. Perhaps they will make an exception to the 12 month wait.

I am trying to authorise my new macbook air and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer

I am trying to authorise my new macbook air for i-tunes and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer

Always remember to 'de-authorize' you computer when selling or sending for service. If sending for repairs you might not get the same mother board or HD back and some how this counts as an authorized computer against your count.
MJ

GroupLayout can only be used with one Container at a time

Dear all,
I am a beginner so please don't throw rocks at me...
I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second frame extends from JFrame). Both frames are created using the designer in NetBeans, so the code for creating the GUI is automatically generated by NetBeans, so both frames use the same layout (GroupLayout).
Here is the code of the button from the main frame to start the second one:
private void manageCustomersActionPerformed(java.awt.event.ActionEvent evt) {
        // TODO add your handling code here:
        CustomerGUI custGUI1=new CustomerGUI();//CustomerGUI is the second frame
        custGUI1.setVisible(true);
}When I press this button from the main frame I get this runtime exception: Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: GroupLayout can only be used with one Container at a time. The second frame is not opened.
How should I handle this?
What I want to do: I want to have a main frame, from which I can start additional ones (the main frame must be always opened, while the additional ones can be closed after performing certain actions). I read a little about internal frames and I think this can be a solution, but I must edit the existing design...
Thank you
With respect,
Don
Edited by: don1983p on Dec 16, 2008 2:21 AM

AndrewThompson64 wrote:
There are those that maintain that JFrame should never be extended. I am not convinced, but most cases where a JFrame is extended would be better coded as simply configuring the JFrame within the main(). GUI builders such as found in NetBeans seem to extend JFrame as a matter of course.I too am not rigorous or religious about this either, but try to adhere to this as a matter of practicality and convenience, I find that if I don't extend a JComponent but rather use composition rather than inheritance, it's much easier to use objects of my class when programming in Eclipse. For instance in Eclipse (and in most IDEs), if I type my object name and then a period, it will show all of the method's available for me to use on this object. If I subclass JPanel or JFrame, I'll see a gazillion methods most I don't want to see, and thus most are clutter. On the other hand if I use composition, I'll only see a small number of methods and these will be only the methods that I want to see and need to use.

Re: "Item category K can only be used without account assignment"

Hi,
while creating PO from PR the following error is coming.
"Item category K can only be used without account assignment"
How to solve this
Regards,

Hello,
Item category K cannot be used with an account assignment as the goods are not physically used in the company. The stock is stilla consignment stock and belongs to vendor. Using an account assignment will book the cost in the company's expenses.
use an account assignment if required when you transfer from consignment to own stock.
Hope this helps,
Regards,
VS

Fedex can only be used with dreamweaver using metric, not pounds (lbs)

Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
This as per their tier 2 tech suport.
They say I should just convert to metric, no joke!
Any ideas would be greatly appreaciated?
Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
Their note to me:
Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
              Silviu Ghimposanu (Adobe Business Catalyst Support)
              Apr 14 15:23
    Thanks for contacting us Michael
Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
He have added this to our internal bug tracker to be fixed for one of the future releases.
    I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
dimensions in pounds and not in KG
    Sorry for this inconvenience!
Kind regards,

If you're in US it will be in pounds. If your site is set any other country
in the rest of the world it will be metric. So BC or as you call it
Dreamweaver will look at the site country, which you set when creating the
site

How can I prevent any use to update Purchase order if status was "Approval"

I have some users can update any purchasing order update after "Approval"
Please I would any Purchasing oracle module expert to Assist me to get way to solve problem.
How can I prevent any use to update Purchase order if status was "Approval"?
Further Information :
Oracle Allpication Release : 11.5.9
Oracle Purchasing Module.
Oracle Data Base: 11i
Khaled,

Try writing a personalization on the PO screen that adds the following condition to the where clause
"and authorization_status !='APPROVED'
However, I will be careful with a blanket restriction like this. There are situations when you need to modify an existing PO. So you should code some exceptions for this rule.
Hope this helps,
Sandeep Gandhi

SubmitGenerateReportAsync Issue. Await operator can only be used with Async Method

Hi,
I am trying to submit a request to download keyword performance report using following .
var reportId =await SubmitGenerateReportAsync(reportRequest); its giving me error
The 'await' operator can only be used within an async method. Consider marking this method with the 'async' modifier and changing its return type to 'Task'.
Here is the SubmitGenerateReportAsync method. I am already using async in definition. Not sure what else is wrong.
private async Task<string> SubmitGenerateReportAsync(ReportRequest report)
var request = new SubmitGenerateReportRequest
ReportRequest = report
return (await Service.CallAsync((s, r) => s.SubmitGenerateReportAsync(r), request)).ReportRequestId;
Same issue with PollGenerateReportAsync
reportStatus =await PollGenerateReportAsync(reportId.ToString());
private async Task<ReportRequestStatus> PollGenerateReportAsync(string reportId)
var request = new PollGenerateReportRequest
ReportRequestId = reportId
return (await Service.CallAsync((s, r) => s.PollGenerateReportAsync(r), request)).ReportRequestStatus;
Let me know if its easy fix.

I fixed the link to our
code example which shows how to run such a report from the console. You would create async methods, run, and wait from within Main.
/// <summary>
/// The entry point for the console application.
/// </summary>
/// <param name="args">Arguments are not required for this example.</param>
public static void Main(string[] args)
var example = new KeywordPerformance();
Console.WriteLine(example.Description);
try
var authentication = new PasswordAuthentication(
"<UserNameGoesHere>",
"<PasswordGoesHere>");
// The OAuthHelper class is available for download with the BingAdsExamples solution.
// OAuthDesktopMobileImplicitGrant authentication = await OAuthHelper.AuthorizeImplicitly();
var authorizationData = new AuthorizationData
Authentication = authentication,
CustomerId = <CustomerIdGoesHere>,
AccountId = <AccountIdGoesHere>,
DeveloperToken = "<DeveloperTokenGoesHere>"
example.RunAsync(authorizationData).Wait();
catch (Exception ex)
Console.WriteLine(ex.Message);
Best regards,
Eric

Material can only be use once on Purchase order

Similar Messages

Maybe you are looking for