Material-certificate Profile.

Where do you get the relaionship between material and its certificate profile ?
Thanks in advance,
Kishan

hi kishan,
go throught this link,
[link|http://help.sap.com/saphelp_45b/helpdata/en/2d/3511dd448c11d189420000e829fbbd/frameset.htm]
[ link1|http://help.sap.com/saphelp_45b/helpdata/en/2d/3511dd448c11d189420000e829fbbd/frameset.htm]
Regards,
sandeep
Edited by: Sandeep patel on Jul 15, 2008 12:48 PM

Similar Messages

  • Single material mtutiple Certificate profile.

    How to system will select automatically certificate profile for a particular inspection lot. On the other way for one material more than one certificate profile for different inspection type will be assign in system.

    Its certainly depends upon the Material-Inspection lot origin & Inspection type combination for a certificate profile .
    A combination of origin and inspection type can only appear once in the list for a material while assigning to a certificate profile.
    When a Inspection lot is created system check the MaterialInspection lot origin-Inspection type ---Certificate profile combination.

  • Link between Material code, Customer & Certificate Profile (Quality)

    Hi All
    I develop one smart form for quality certificate.
    But I am not able to find out the link between Material, Customer & Certificate profile.
    In which table these all data are storing.
    On the basis of above condition MIC will print on Quality certificate.
    Regards
    ARK

    It should be posted in QM forum, isn't it?  Anyway, try this.
    First you get the profile schema in table T683 (configuration of profile schema in Quality Management -> Quality certificates -> Certification Profile -> Profile determination -> Define schema for profile determination).  Standard one is QC0001.
    Then you use function call V61I_CERT_PROFILE_FINDING with parameter (standard routine for finding certificate profile.  Unless you have the user exit, this routine should work):
    I_APPLICATION = QC
    I_DATE = current date or whatever date (i.e., delivery date in outbound delivery)
    I_DIALOG = leave blank
    I_HEADER_COMMUNICATION => here you can put in your customer, material, plant ; depend on your access sequence
    I_SCHEME = value from table T683
    You will get the output in table E_KONDI which give you data of condition rec. no, certification type, profile and version.
    Then you can use certification type, profile and version to select the characteristics from QCVM.
    Hope it helps.

  • Creating certificate profile

    Hi all,
    Please tell me what are the mandatory fields in the creation of profile ?
    what are the diff. config. settings?
    thnx

    Steps in IMG
    Certificate type can be crated for identification, hence you can crate type in img (Quality ManagementQuality CertificatesCertificate ProfileDefine Certificate Types)which you can assign a status profile if required.
    Define a form which you can use the std one
    Define Data Origin and Profile Determination u2013 this I think std can be used unless you want to defer  SAP std. This will help to choose a certificate profile incase if you have more than one for a particular combination
    Transaction
    In QC01 use the certificate type created and enter a name for profile.
    Give the name of form.
    Click on characteristics overview button and enter the details. and then the release the profile
    In QC15 assign the material to certificate.
    Try and come back

  • Problem in certificate profile assignment during QC15

    Dear SAP Gurus,
    1.In Development server while assignment of certificate profile  we can see the combination of Material/Plant.
    2. In production server  while assignment of certificate profile  we cannot see the combination of Material/Plant.
    Can anybody please suggest the solution.
    Regards
    Debjeet

    we have only  three options
    1)material/customer
    2)material
    3)Material Group  where is Material/Plant option i conn't get

  • No certificate profile found

    Hi Everyone,
    I am trying to generate certificates when we do a post goods issue for an outbound delivery.
    When I go to vl03n and go to extras, delivery output, header; I see two entries one for LQCA and one for LQCB.  both have a red status and the processing log states that "No certificate profile was found".
    I used QC03 and did a search using assignment on the certificate profile field and entered the material number that is on the outbound delivery.
    the system pops up a window that shows that material assigned to a Cert. profile on 4/2/2008.  The outbound delivery is for 4/16/2008.
    Any idea what I should be looking for?
    Thanks,
    Mike

    Hi Mike,
    Please check the Validity Period of CErtificate Profile and assignment.
    You may create a new asssignment is QC15 for the combinations of Plant/Material etc.
    Thanks and regards
    Murugesan

  • Certificate profile

    How to prevent erase of certificate to sign and encrypt? I've not found in restriction the setting for save certificate.

    Hello Atul,
    COA Profile
    A certificate profile controls inspection lot selection, the sequence of characteristics, and the characteristic data.COA Profile contains the List of MICs in desired sequence in which the result for them is supposed to be printed in the COA.
    Within the certificate profile, you determine the selection and sequence of the characteristics whose results are to be documented on the certificate. You can vary the origin and representation of the data for each characteristic. You can also withhold certain information from the certificate, if, for example, you do not want to reveal a certain measured value.
    At the header level of the certificate profile, you can define restrictions for selecting inspection lots and partial lots. For example, you may want to specify that only lots with a quality score of at least 80 are considered. At certificate creation, the system selects all inspection lots and partial lots for the material (and batch, if necessary) that meet the selection criteria and have a usage decision. The characteristics are then retrieved from the most recent inspection lot or partial lot in this list. (The lot creation date is the determining factor.)
    If further clarity required, pls let me know.
    Now towards your second question,,,,
    In COA Profile, you want to know what are the materials assigned,,,,
    Here are the options available....
    1. In COA profile QC02/QC03 screen there is a tab available named as "ASSIGNMENTS", just click on it and it will give you the details.
    2 The best way is Run trx QC17. and know the list.
    Regards,
    Shyamal

  • Regarding Certificate Profile

    My client want to have a tool which will have complete  overview of all certificate profile in the system.Is it possible to have an extraction out of SAP?Is there any such tool existing presently.If I have to create a new one any suggestion on how to map this such that I can have the overview of all certificate profile in the system.
    Please suggest.

    Hi,
    It does sound like your client is looking for not only certificate profile details, but indeed the records associated with it from wherever in the system.  The best way to do this wold be via a bespoke report “pulling in” all the required details they wish to look at. 
    Obviously the more details required, more fields you’ll need, sometimes depending on how much/level you want to see may require 2 reports.  However this will come out in your mapping and why the mapping is a crucial step.  I imagine most of the fields you require should be fairly standard and easy to identify as discussed, mostly in the QM area.  i.e.
    QCVK Certificate profile header 
    QCVM Certificate profile characteristic level
    QPMK Mic data including control indicators etc.
    QMSP    Material Spec.
    etc
    The other advantage of the bespoke report is you can apply specific “rules and formulas” to the output to help with analysis. (although that’s the programmers realm ).
    Regards

  • Delete the assignments for the certificate profile

    Hi Experts,
    Can anybody please tell me how to delete the assignments of material for the certificate profile.
    Regard
    Raja S

    Hi Shyamal,
    I Run Trx QC18 , Entered Key Combination, same as what I have entered at the time of assignment through QC15. In the next screen,  I entered the material code to delete from the Profile.& Execute
    But in next screen there was no combination of material & profile in line item.
    What to do.

  • Certificate Profile Assignment - QC15

    Hi All,
    Is there any standard object/Bapi/Idoc to create 'Certificate Profile Assingnment' for the t-code 'QC15'?
    Thanks in Advance.
    Senthil J

    we have only  three options
    1)material/customer
    2)material
    3)Material Group  where is Material/Plant option i conn't get

  • QM-How to add a New "Output Format" in Certificate Profile?

    Hello QM Functional Experts,
    Can any of you tell me how we can add a custom "Output Format" in the Certificate Profile (QC01/2/3). I tried the Configuration approach via QM-Quality Certificates-Certificate Profile-Define Data Origin. I do not see an option here to add a New Output Format.
    If this is posted in a wrong forum, I apologize. I am not able to find the correct forum for QM. Please redirect me and I will be glad to post it in the right forum.
    Thanks,
    Nagesh

    Hi,
    You can use the FM ..RV_MESSAGE_UPDATE..
    Thanks
    Naren

  • Change of unit in Certificate profile

    Dear Friends,
    I want to chane the unit of measurement in certificate profile from mg/kg to PPM, but system is showing error as
    "Unit mg/kg cannont be converted to unit PPM"
    Please giude, how to over come this error as I want to change the UOM in COA.
    Regards,
    Amit Shirsath.

    Hi Amit,
    It doesn't seem to be possible.
    May be you need to create another MIC and do the re-assignments.
    Regards,
    Arpit

  • QM layout set QM_QCERT_01 for certificate profile

    Experts,
    I'm creating a certificate profile in QC01 and I want to assign form QM_QCERT_01 as a layout set. It's the standard SAP form for the quality certificate.
    But I get the error message: "Text QM_QCERT_OFF_SPEC_TEXT not available for layout set QM_QCERT_01" (Message no QC 094).
    Diagnosis: In the form QM_QCERT_01, a reference exists to text QM_QCERT_INSPECTION_METHOD (text ID ST, language EN). However, this text is not available in the current client. This may be due to one of the following reasons:
        o  The text is only available in the original client.
        o  The text is not available in either the original or the current client and should therefore be created.
    System Response: The text cannot be evaluated while the certificate is being created. Information and logical queries could be lost for this reason.
    Procedure: Check your entries in form QM_QCERT_01. If required, create the text QM_QCERT_INSPECTION_METHOD.
    If the text is only available in the original SAP client, copy it in all languages (if necessary) from the original client to the current client. To do this select Tools -> SAPscript -> Standard text -> Utilities -> Copy from client.
    How do I check if the text is available in the current client? How do I add or create the missing text?
    Thanks. Rgds

    If you are not sure then you can copy the std form and text in SPRO>QM->basic settings>
    Transfer QM Standard Texts  
    Transfer QM Forms.
    hence from 000 client this will be copied and then you can check it once again..if still problem persistis then it is sure that it is not available in std sytsme and you need to talk to ABAPer to cretae a text element  QM_QCERT_OFF_SPEC_TEXT .
    This may be created in your client and assigned to layout...just check

  • Idoc/BAPI for Certificate Profile creation

    Hi,
    Is there any Idoc/Bapi available for Certificate Profile creation (Transaction Code  QC01).
    Appreciate your Inputs.
    Thanks.
    Regards,
    Pc

    BAPI_USER_PROFILES_ASSIGN  Change User-Profile Assignments
    SUSR_BAPI_USER_PROFILES_ASSIGN  Methods of object USER
    Edited by: Mahalakshmi Padmanaban on Feb 15, 2008 1:51 AM

  • Upload certificate profile (QC01) USING LSMW?

    Hi,
    is there any bapi/ standard method / ale/idoc for upload certificate profile (tcode qc01)?
    thanks,
    abaper

    Hi,
    Pls check this Link Re: Certificate Profile QC01
    Note : Quality certifiactes which is important for business,there are two types.
    Incoming Certificate - while performing incoming inspection against MIGO (Vendor PO),quality inspector/engineer should prepare the certificate,this scenario is called Incoming certificate.
    Outgoing Certificate - while performing Final inspection against Prod.order or Sale order delivery,quality inspector/engineer should prepare the certificate,this scenario is called outgoing certificate.
    Quality certificate profile is mandatory with characterstics values.
    Thanks & Regards

Maybe you are looking for

  • Tables in report?????

    Hi, For out of stock report and report for listing goods receipt which tables are used and how should i use them.... Thanks Megha

  • Why are PDFs not opening?

    A course was published with several PDFs using Presenter 7. The PDFs open when viewed on the LMS. In an effort to decrease file size I've gone back into the course using a newly purchased version 8 and added PDFs that were lower in file size. The cou

  • Fixed Day in a week as Delivery date in Purchase Order.

    Dear All I have the below requirement For a material/ vendor combination users would like see  always a fixed day as delivery date in Purchase Order. For  example for a Material X and Vendor Y always Wednesday of the week should be delivery date. Whe

  • How can I consolidate (merge) two adobe ID's

    Sorry for putting this here - but the chat (which comes up after a maze in the helps) does not work for me - and there does not seem to be a forum for general questions or an Adobe e-mail address for help requests either. I have two ID's: one for for

  • Can I use Scalable Vector Graphics (.SVG) in RoboHelp 11 projects?

    I need to import .SVGs into my RoboHelp 11 HTML5 project, but that file type doesn't seem to be supported. I tried pasting the appropriate HTML code into a topic, but the SVG graphic doesn't show. Am I missing something, or is there a work-around?