Material Configuration from Agreement

Hello Specialists,
My Customer is using Materials with Configuration in Material Master as basic.
He uses also Contracts (Agreements) for this material with Configuration but with different characteristic-Data.
In Sales Order a Purchase Requisition is created and this agreement is used as source of supply.
Now the Configuration characteristic-Data from the Material Master is automaticly placed into the PR Configuration, but we need the characteristic-Data from the Contract.
How is it possible to get the different Configuration characteristic-Data from the Contract  into the PR Configuration?
Regards
Wolfgang

Hello Specialists,
My Customer is using Materials with Configuration in Material Master as basic.
He uses also Contracts (Agreements) for this material with Configuration but with different characteristic-Data.
In Sales Order a Purchase Requisition is created and this agreement is used as source of supply.
Now the Configuration characteristic-Data from the Material Master is automaticly placed into the PR Configuration, but we need the characteristic-Data from the Contract.
How is it possible to get the different Configuration characteristic-Data from the Contract  into the PR Configuration?
Regards
Wolfgang

Similar Messages

  • Problem when filling material configuration from webmethods

    Hi,
      We are using Webmethods SAP adapter to create a sales order using BAPI. The order is getting created but I was not able to see the configuration of the material. But when I try it in SAP it is working fine and I am getting the configuration. Please suggest me what I should do.
    Thanks,
    Sarath.

    Hi Brijesh,
    Check the Number Ranges maintained for reservations and PRs..generated for Network. There is some inconsistency in your system in retriving from the data base in T-code CJ20N . This type of errors occur for different T-Codes like CJ20N, ML81N....
    Check the SAP Notes relevant to the error message in CJ20N.
    Regards,
    Hari

  • Is it Possible to delete the configuration from a Material Variant?

    Hi,
    Can you delete the configuration from a Material Variant and then reconfigure the part in MM02?

    Hi
    Once we created variant we can't delete it,
    Regards,
    srihari

  • Configurable material in scheduling agreement

    When I use DS scheduling agreement with LPN as item category with configurable material, I cannot input value for configuration. But if I use normal TAN instead of LPN, I can input value for configuration.
    Why?
    Does SAP do not allow configurable material in scheduling agreement or quantity contract?
    Thanks in advance for any suggestion.

    Deat Amy,
    Please check the item category settings related  to configuration through VOV7 transaction.
    Go to VOV7 transaction then select item category LPN then go in to the detain here you check the configuration related settings under Bill Of Material /Configuration tab.
    If want you refer the standard Config.at Mat.Levl itemcategory TAC settings, same way you can do settings for your item category then try.
    Note:- Not advaisable to change the standard one, so you copy the standard itemcategories do the changes,
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Nov 13, 2008 5:20 AM

  • Take back the exploded material Items from variant configuration

    Hi All,
    Can any one of you please tell me how to get back the exploded material Items from variant configuration? I was looking for a function module which takes me to CU50 and once user finishes the configuration process. I would like to take back all the exploded Items to my application.
    Thank you in advance...
    Regards,
    Santosh

    Hi,
    Create SPK at plant 1000 with below settings,
    Plant =1000
    Spy type= 70
    Proc type= E
    Special proc type= E
    Activate " withdrawl .alter.plat" check box
    Issuing plant = 2000
    Assign the Same SPK for component in plant 1000 at MRP view  not for Header material.
    And Run the MRP  for Header material at plant 1000 and check ths requirement would have creatd for Component at plant 2000 .
    I hope this will solve your problem.
    Pradeep

  • Problem on Material Replication from R/3 to EBP

    Hi friends,
        I am having a problem on Material replication from R/3 to EBP. I had configured all the required settings in EBP as well as in R/3. Whenever we are starting initial loading R3AS I am getting outbound queues in EBP instead of R/3. I am getting the error like 'The current application triggered a termination'. I could able to replicate Vendor and Locations from R/3 to EBP. If anybody can solve this problem.
    Thanx in advance.
    Raj

    Hi Ahmed,
        Could you please elaborate. I am getting runtime error as 'Message_Type_X' (The current application triggered as termination with a short dump).
    Thanks
    Raj

  • Variant Matching - Function module to obtain material no from Char Values

    Hi,
    We are not using standard functionality.
    We have a set of characteristic names & values. Our aim is to fetch material number from these. (Variant matching part of CU50)
    We have tried debugging but in vain.
    In the MRP 3 view of these material masters, characteristic values are maintained (under configurable material)
    Please suggest some function modules or table names for fetching material number from characteristics.
    Regards,
    Mahesh Patil

    Hi Mahesh ,
    try out below functional module , may be its of your use.
    CAVC_C_TYPE_MATCHING
    regards
    Ritesh

  • MM-SRV: Adopt Material Group from Service Master instead of default in SPRO

    At my current client we are encountering a problem when creating requisitions for services.  When the system was originally configured years ago, a default value for material group was entered in the IMG under:
    Logistics > Materials Management > External Services Management > Source Determination and Default Values > For Client
    Field is "Default material group at item level" (V_T165-MATKL)
    Up to now this singular default value was fine because they only had one material group for services.  They are now wanting to further stratify their services spend, so there are now several additional values for Material Group that can (and are) used among their service master records.  Having a single default value for Material Group is resulting in incorrect reporting of spend per Material Group.
    I removed the default value in the config node stated above, but now the problem is that when creating a requisition line for services (item category D) in ME51N, no value for Material Group comes in at all, resulting in an error because Material Group is a mandatory field.  Making the field optional on the Field Selection Groups is not a valid solution, as they need Material Group for spend reporting.
    What we really need is for the Material Group to be automatically copied over from the service master data, in the same manner that this takes place for the material group contained in a material master.
    Is this possible?
    Thanks in advance,
    Jason

    Hi,
    Hi,
    1) If service master is used in the PO item, then the system will take the                    
    material group from the service master (AC01). 
    2) If no service master is maintained then the system will take the                 
    material group from the table T023. To be able to change this material group on services level - if you want a different material group on services level, you must set the field ESLL-MATKL for visible in the table control settings, and the change of the service group must be carried out manually.
    Please be advised that it is the standard behaviour that the material               
    group on service level is not updated automatically after you have                  
    changed the material group on purchasing level. The material group on               
    service level must be adjusted manually.                         
    3) By default for service lines the system will consider the material              
    group which is entered at the Item level.                                                                               
    Services can have different material groups, therefore you can change               
    the material group at service level. The material group in service line             
    can be different and always takes higher priority from the material                 
    group at the item level.        
    Regards,
    Edit

  • Use of Material price from material master in billing of material services

    Hi,
    In material consumption cycle when material service is billed, the rates/prices  that are used for billing
    come from the service column in service master  whereas the functionality requires to bill on the actual material rates From the material master in MM.
    How can i get this done.I have already tried with pricing procedure configuration.
    How can i use the material price for billing purpose.What exactly i need to do.
    Please assist.
    Regards
    RAMIT

    Hello colleagues,
    I am working on the same topic right now.
    I've done the following steps:
                                   1). Service Rule R24
                                   2). Default Material Service
                                   3). Mode 2 for a material in a material master data
                                   4). A condition table
                                   5). An access sequence for this condition table
                                   6). A condition type
                                   7). A pricing procedure: with the formula 510
    I have two questions:
    1). The system creates an invoice at cost zero when the calculation type of the condition is"Percentage" in the condition type.
    The system creates an invoice at cost nonzero - when the calculation type of the condition is "Quantity" in the condition type. In this case I define an amount for a material directly in the condition.
    I want to use a price of material based on a material master data. Could you please tell me what must I do for that?
    2). I don't maintain a material directly in a material consumption view: I create a good issues for a case and the system creates a record in a material consumption view. In this case the R24 doesn't work: a default material service isn't created by the system based on a material in a material consumption view. (R24 only works when a material is maintained directly in a material consumption view).
    Did somebody face with the issue? Do you have any idea how can I fix it?
    Thank you very much for your time.
    Kind Regards,
    Alexander.

  • PRODUCTION order material configuration info

    HI,
    any one please let me know how can i get production order material configuration information.from which table we can get this info or is there any function module
    to get this info.
    Thanks & reagrds..
    Anil.T

    check this include Program , u will find out list of FMS
    <b>LCOOCCUXX</b>
    regards
    prabhu

  • Replicating of Material Master from ECC6.0 to SRM 5.0 in real-time

    Hi,
    I saw the URL on the steps to replicate Material Master from ECC to SRM:
    /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
    It requires to run transaction r3as to load the material.
    Can I check do we have to do this step periodically to pull material master from ECC?
    Is there anyway to have a real-time RFC whenever the material is created or changed?
    Thanks!
    WEi

    Hi all,
    Thanks for the answers. Has anyone successfully sync the new material creation to SRM after initial load by configuring the delta?
    What is the exact function module / Bdoc / idoc that sync the material master to SRM?
    If we want to cusomize our own filter criteria like exlude certain material groups and include only material starting with certain numbers, how can we do that?
    Thanks!
    Regards,
    Wei

  • Populating the configurator from install base!!

    HI All
    We have a requirement of
    Referencing the current product configuration from the Install Base and then populating it in Oracle Configurature , If any feature code is not populated due to any reason ,then we need to show those reason in the report .
    Do we have any stabdard API or concurrent program to this ??
    Or any program which does some part of the above requirement !??
    Pls help
    thanks
    naveen

    hi,
    To get one service customer created one order in CRM system (say A) and this order is came down to our system(say B) and we send it further to another system(say c). we got ok response from system whome we send the order i.e. (C), so in our system (B)we close the order.
    But unfortunately this order is failed in System C so we need to cancell this order. We cancelled the Order in system A but in our system(B) order is close so it is not possible to cancelled this order so we need to remove this item instance form install base.

  • ERROR -WHILE LOADING MATERIAL MASTER FROM A FLAT FILE

    HI GUYS ,
    I AM TRYING TO CREATE MATERIAL MASTER FROM A FROM FLAT FILE
    IAM GETTIGN AN ERROR MESSAGE
    'YOU HAVE NOT FULLY MAINTAINED THE DESCRIPTIONS'
    REQUIRE HELP ON THIS
    THANKS

    Hello Nishant
    All the inputs that are required to create a material in dialog (MM01) should be mandatory as well if you are going for LSMW or BAPI. Obviously your material requires a description (which will end up in MAKT). If you have this description in your flat file then there are additional (perhaps language-dependent) descriptions required.
    You could try to use BAPI_MATERIAL_SAVEDATA in your test environment to find out the minimum input that is required to create a material in R/3.
    You may also have a look at thread what are the parameters have to pass to bapi material creation?
    Regards
      Uwe

  • Replication of Customer and Material master from R/3 to CRM

    Hi
    Recently in our quality server basis administrator has made a client copy from production server after that customer master and material master are not flowing from R/3 to CRM, even sales orders were not getting copied from CRM to R/3 , i went through C71 BB config document and fixed the sales orders updation from CRM to R/3 but not able to resolve the problem of customer master and material master from ECC to CRM.
    I went to B09 BB document and all settings are fine.
    Using R3AS I have loaded following objects DNL_CUST_PROD0, PROD1, PROD3, SPROD , DNL_PLANT. and Material.
    I went to R3AM1 and checked the status as running or wait for each object.
    There are no filters in R3AC1 .
    Queue name withR3AD_MATERIA0000000001 has status SYSFAIL in SMQ2  .
    What can i do to resolve this problem.
    Please advice.
    Thanks,
    Vaishnavi

    Hello Vaishnavi,
    After the client copy , have you run txn:BDLS in order to change the LOGSYS in all relevant tables?
    You can run this txn in test mode as well to see the affected tables.
    Are you getting any dump on these load ?Check it in txn:ST22.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Error while importing configuration from NWDI into NWDS

    Hi All,
    I am working on customizing ESS applications. I am unable to import the configuration from NWDI to NWDS. When I select 'Remote' option and enter the user id and password for SLD, I get the following error:
    <b><b>HTTP response "Unauthorized" from CMS server</b></b>
    Any idea.
    Thanks,
    Tom

    HI Tom,
    Please check your username and password. It iseems it is incorrect.
    Try o login with same id and password on
    http://<server>:<port>/devinf
    Here, try to login on each link. i.e.
    CBS
    CMS
    SLD
    and DTR.
    It will ask for ID and password once again. Check whether it is working here.
    There might be possibilities That you ID is locked.
    Regards,
    Bhavik

Maybe you are looking for