Material consumed for sales order

Hello,
Is there any report to know the consumtion of raw materials for perticular sales order.
According to my knowledge I know the consumtion of raw materials for Production order(coois).
There is a option in COOIS -- sales order, but it's not showing any raw materials consumtion.
NOTE:- Our Business process 1) Va01 -- Sales order, 2) Co01 -- Production order(Manual-- we r not using MRP), 3)MIGO -- Goods Issue, 4) CO11N -- confirmation -- 5) MIGO - Goods Receipt.
w/regards
ram

HI Bishwanath,
I checked as you mentioned above, but I am not getting anything.
It's showing "there is no data for the selection".
Pls give me solution for this. it's an client requirement needed urgently.
w/regards
ram

Similar Messages

Material block for sales orders

Hello, people.
How can I block a given material only for inputting sales orders?
Regards,
Adriano Cardoso

hi
with reference to question i wil tel u exact answer.
step1: goto MM02->
enter material -> goto SALES ORG1 tab , in this u have the option called DCHAIN SPECIFICATION STATUS filed --- select the option " sales not allowed".
save the material.
step2: goto img screen
logistic general->material master->setting for key field->data relevant for SD->define sales status
goto order option select B-error.
any doubt please reply i wil tel u
regards
murali
Note: without solving ur answer donot select option like my question is solved option.

Report for Sales orders with the consumed credit limit value

Dear Gurus,
In my company, the credit check is at sales order level. We want a report which shows up the credit value consumed from the credit master by Sales order.
Going into the details, Say Credit limt is setup for a customer at Credit master for 10000 $.
I want a report showing Sales order 59235 has consumed 500 $, Sales order 59277 has consumed 1500 $, Sales order 59333 has consumed 2500 $.
Is their a report in standard SAP for the above functionality. If not, any ideas of how to achieve it?
Thank you for your responses.
Regards,

Hi,
Try the following transaction codes
S_ALR_87012218
FDK43
F.31
But if you want to a report like what you explained in thread i think in standard not available we need to develop a customized one.
Regards

Error reading material cost estimate for sales order (KE292)

Dear All,
I have an issue with billing. we are posting july month transactions, the material cost is maintained through MR21. When releasing billing document for accounting we are getting error message like"Error reading the material cost estimate for sales order "11"
Message no. KE292
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate item 000010 of sales order 11 by reading the corresponding product cost estimate.
However, no product cost estimate could be found for this sales order item.
The system accessed product costing for product AMLFP011011XX00P using costing key YB3 as defined in the
CO-PA Customizing settings.
System Response
The system cannot process the document any further.
Procedure
Check your Customizing settings."
We cross checked with other client as a current date and we ran cost estimate through CK40N with same material. and we posted entries. Here it is working fine. but in above process it is not working. Can you pls guide me where i missed.
Regards,
Nagaraju,

Hi,
When the Costing Key is assigned to the material types in the COPA customizing, then system expects Cost estimation when billing is released to Accounts.
If you dont run cost estimation but update the material master through MR21, system will not accept as in the Costing key configuration you must have selected the Current Standard price field for the valuation.
Hence, try to run cost estimation and then do releasing.
Thanks & Regards
Ravi Kumar

Planned material price in case of production order for sales order (MTO)

Hi,
In case of production orders created for sales order, the planned price for a component (BOM) material gets picked as per following:-
1. If there is no entry in EBEW for the component (that is, there is no previous GR for the component) for that sales order, then plan price is picked up on the basis of planned costing variant.
2. In case there is an entry for the component in EBEW (there has been a previous GR for the component with reference to the sale order) then the plan price for the component is taken from the EBEW table (first GR price) and system ignores the costing variant.
The above is as per my observation. Please validate if this is correct or not.
The requirement is that even if there has been a previous GR for the component (there is an existing entry in EBEW) the system should take the plan price on the basis of costing variant and not from the EBEW table.
How can this be achieved? Is there a user exit that can force the system to read the costing variant before looking into the EBEW table?
BR
Abhi

Hi Ajay,
Yes i had considered it but I'm not sure If it will help.
Because the main problem here is that system is ignoring the costing variant itself and instead picking the price from EBEW table. So changing the costing variant (validation variant) may not help.
Moreover i don't want to valuate with my own strategy. I want the plan price to be equal to standard price of material from material master. Basically MBEW instead of EBEW.
Any clues?
BR
Abhi

Block material for sales order

Dear All,
there is any transaction code to release the block material(for sales order) with refernce to specific plant.
i can do in CO06 but we can delete one by one.
but i want to delete all blocked material form 2008 to till date.
Regards
ajit

Actually i have created a numbers of order since 2006 to till date but delivery is still pending.
because of this material is blocked for specific order and i can not create order for particular material because its block,
i have around 100 orders.
i know that we can do through CO06.but i don't want to do one by one.
Regards
ajit

Invoiced blocked for sales order (configurable material external procurement )

Hello Expert
Configurable material external procurement
Invoiced blocked because ,"Error reading the material cost estimate for sales order "75501"
Message no. KE292
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate item
000010 of sales order 75501 by reading the corresponding product cost
estimate.
However, no product cost estimate could be found for this sales order
item.
The system accessed product costing for product 10820 using costing
key 002 as defined in the
CO-PA Customizing
settings.
System Response
The system cannot process the document any further.
Procedure
Check your Customizing settings.
Note:We can't run cost estimate and releasing it because it's a configurable material but external procurement. We place a purchse order based on configurable sales orser
Thanks
Parves

Hello Declan,
Thanks for your reply. Could you please give me the steps for Maintain the
sales order cost estimate?
Requirement: Customer service receive order with variant configuration product,
then MRP Crete PeReq, convert PO and
send to supplier .Supplier configure the product and direct delivery to
customer. Supplier sends an invoice to us. Then we send invoice to our customer
Thanks
Parves

Goods Receipt for sales order stock

Hi everybody,
I want to receive materials for sales order stock. what I did:
1- Created a Purchase order,
2- Account Assignment = C
3- went to MIGO
4- selected PO number
5- set movement type 101 / E
the SAP give error message that you have not planned 101 / E !!!!
I searched alot but couldn\t find the solution.

Hi Dear,
When you use C account assignment category, System will consume those materials/services for the respective sales order at the time goods receipt/service confirmation. There is no inventory possible when we use, account assignment C as a standard, If you want to make inventorize, we have to choose account assignment category M against sales order.
When we are procuring material against project, Account assignment Q-will be inventoried and P-will be consumed for respective cost object
Like the same M-will be inventoried and C--will be consumed for respective cost object
R,
Amala Srinivasa Rao

Sales Contract with Material Variant at Sales Order

We are producing fabric and using make to order in SAP. Our customer give us a commitment with qty and a fixed price for certain fabric in advance, then later they release order to us with specific qty per color. We want to use Sales Contract for the customer commitment and sales order when the customer release the order with color qty to us. We are putting color in the sales order in the material variant. However we are facing the following problem:
1. Let say we have a contract 1 with 100,000 yds of material A.
2. then we have a sales order 2 of 20,000 yds of material A with color Blue refering to contract1.
3. Somehow our factory over produced Material A color blue total 25,000 yds.
4. Then we have another sales order 3 of 5,000 yds of material A with color RED referring to contract 1.
5. MRP does not create plan order for RED material A because it is showing customer stock 25,000 with contract 1 and 20,000 consume by sales order 2 and 5,000 extra. however these 5,000 extra is blue is not red and cannot fulfill sales order 3.
Any idea how to solve this problem?
Tks,
Calvin Ngan

Hi Calvin,
I think if you define your material as configurable, it can solve your problem.
A car, for example, has a large number of options that need to be described wheras the order is created only at a model and variant level. Then you define values for characteristics, to allow you to select specific options, such as 'black' for paint.
So in your case you need to define characteristics of colour(or texture or thickness) or whatever differentiates each output and add optins for each of them.
These are asked for and stored both in your reciepts(stocks, Prod. orders, POs etc) and in your requirements(SO etc). Also MRP will differentiate between each characteristics while planning.
Hope this helps.
Thanks & Regards
Santanu Dawn

How settlement rule will be created for Sales order with cost object

Dear Experts,
We are using product cost by sales order with valuated stock. In addition we are not using COPA
We also consume some materials at sales order level and at the end of month we want to do the result analysis and settlement for the same amount. In this case can any on explain how system will behave regarding settlement of sales order cost and what entries will get pass in the system.
In our case we have done below activities...
we have created sales order,
All production order activities completed till final GRN including month end activities
Material consumption against sales order
Result analysis executed
At the time of sales order settlement, system throwing error (Sender doesn't have valid receiver, please create settlement rule for sender object)
Then i checked in sales order there sales order settlement rule not defined.
I guess this settlement rule need be generated by system automatically. If not, please let me know the process of it.

HI kishore
the reason is that sale order always carry the revenue and production order and production period carry the cost .
cost you can settle to the Material and even management want to be settle the cost to material only in production order OR period
but in sales order when u sell the product it carry the revenue not the cost and management want see and analysis based on profitability segment are profit center level .
Prerequisites
If CO-PA is active, the system generates a settlement rule when you create the sales order. The settlement rule determines whether data is settled to other objects or other areas in Controlling. In accordance with this settlement rule, the relevant data is settled to CO-PA.
If CO-PA is not active, create a settlement rule. This settlement rule that you create manually normally contains a G/L account as a receiver (such as 399999). You can also settle costs and revenues or results analysis data to objects with revenue.
You can also settle the cost of sales calculated in results analysis to a fixed asset or a cost center. To do this, you must add to the allocation structure the results analysis cost elements under which the cost of sales is updated to the order.
The settlement rule includes a distribution rule for the sales order item. The distribution rule is made up of a settlement receiver, a settlement share, and a settlement type:
The settlement receiver (such as profitability segment or G/L account) specifies the object to which the actual costs and revenue of the sales order item are settled. The settlement receiver can be proposed through the settlement profile.
The settlement share defines the percentage or the equivalence numbers used to distribute the costs to the individual settlement receivers. The settlement share for sales order items is usually 100%. A settlement share of 100% is preset in the system.
The settlement type specifies full settlement of the sales order item. This ensures that all the data on the sales order is available for results analysis.
Settlement still takes place in each period. The revenues and the cost of sales are transferred to CO-PA by period, and the work in process and the reserves are transferred to FI.

RBA GATP check is not getting invoked for Sales Order

Hi Everyone,
RBA GATP check is not getting invoked for Sales order.
I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
I would expect that system would propose the same material in an alternate location where we have stock through RBA.
Request you to share ideas on this.
Regards,
Avijit Dutta

Hi Avijit,
You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
Thanks,
Bala.

In which table,i could find order quantity for sales order..??

In which table, i could find order quantity for sales order..??
and also in which table i could find delivery for sales order..
need help..??
Moderator message: please search.
Edited by: Thomas Zloch on Feb 23, 2012

Check the table AUFM.
Give the order number in AUFNR.
For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS).

How to check the analysis of material determination in sales order

hi,
We are trying to create a sale order with material determination. Material determination analysis is on. After switching this on while adding a new line item, in an existing sales order, we are able to do analysis as the system itself takes us to analysis screen. But once the document is saved, we need analysis to be done at material determination for the determined materials , something similar to pricing or account determination analysis.Please help
Regards,
Aparna.

Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore

How to block material issuing after sales order invoiced?

As the subject mentioned, could be a possible to block material issuing since sales order invoiced, or
in the another words, after the sales order completed?
Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
forbidden?
Thanks in advanced,
Zhou Zhen

Dear Friend
A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
That means the order 10000 is closed
Case 1
Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
Case2
But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
But you can test it if it throws any warning message we can try to convert that error
But in case 2 it is not happening(even warning is not there)
Regards
Raja

How to change material discription at sales order item level ?

Dear Gurus,
We have some requirement need to change material description at sales order item level , but in system it is in disable mode how to change that into change mode in sales order item level?
Thanks in advance
Regards
Venkat

Not possible in SAP Standard.
Instead why not create a Customer Material Info Record in T-Code - VD51?
Alternatively it the requirement to change the Description is only for few Sales Order then create a Text ID & Enter the Description in Text Feild. Then in Smartform program wrie a code which will check for Material Description in the Text first & if not found then take from normal material Description in Sales Order.
But Customer Material info Record seems to be the best solution.
Hope this helps,
Thanks,
Jignesh Mehta

Material consumed for sales order

Similar Messages

Maybe you are looking for