Material / contract classification system
Hi,
Does anybody know which table has the information that says if a contract or material has the classification system activated.
Thanx
Hi,
You can search an object in class using transaction CL30N and CL31, but you need to know at least the class name or the characteristics for the object.
Phyllis.
Similar Messages
-
Function to remove a material in classification system
Hi Folks!
I'm seeking a function that removes a material from a class belonging to a vendor from the classification system.
Thanks in advance for your help.
Regards,
Gilberto LiHi Folks!
Thanks for your replies, I really appreciate your help.
I was looking for the BAPI: BAPI_OBJCL_DELETE
However im having some trouble to make it work. I read the documentation, and I think this should work.
The problem I'm having is filling the BAPI:
I don't know if you have worked with this BAPI but I don't get what to pass to the parameters:
I'm doing as following, for the field:
OBJECTKEY: I'm passing the material number.
OBJECTTABLE: I'm passing 'LFA1'.
CLASNUM: I'm passing the name of the class, for example 'MATSERVPROVEEDOR'.
CLASSTYPE: I'm passing '010' that means vendor class.
What I don't understand neither is where to pass the vendor number so it only removes the material from the vendor. Another thing also is they KeyDate, don't really know what date I should pass?
After testing with no success on objectkey passing the material number I passed to the ObjectKey the vendor number, but the result was the deletion of the entire class and its values, and that wasn't what I expected, I only want to remove some values of the class, not the entire class.
Any help would be really appreciated.
Thanks Again.
Regards,
Gilberto Li.
Message was edited by: Gilberto Li -
Material Management/ Classification System
Hello
When I look materials by class and I display the materials but when I want to select two or more materials for copy, I get the following message:
Message no. CL479
This application can only copy one object from the search result.
Select one object to copy.
If you want to copy more than one object from the class in Variant Configuration, you must set the Multiple selection indicator in the additional data for the class.
So, I need to know how set the multiple selection indicator in the additional data for the class. I need help with that.Hi Expwrts,
I have this exact problem in transaction SQ01. When i use the F4 button, choose "Materials for class" tab and when i try to select more then one material from the list i found i get the above message.
does any one knows how to make it possible to choose more then one material?
thanks in advance
yoni -
Reference class In the classification system for a material.
Hi All,
I would like to know What is meant by reference class in classification system for a material? If we are using a variant configuration scenario expalin in context to the classification systme used in this.Hi
I am not sure of anything called as Reference class but definately we have Reference charecteristics inthe SCE application. Below is the brief description of the Reference charecteristics- see the link below
http://help.sap.com/saphelp_crm40/helpdata/en/8a/dff538b0bd4606e10000000a114084/content.htm
Corresponding to R/3 Master data is maintained in the R/3 database.
Please let me know if yoy need any more info
thanks -
Change documents of material master classification class type 001 and 300
Dear guru ,
I want to see the history of change documents of material master classification using MM02.
The system allow to see the history only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
I must do some settings or the function for these class type arenu2019t available ?
Thanks.Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks. -
Multiple class types for material master classification display default.
Hello,
We are running on R/3 4.7. We use several different class types for our material masters (001 and Z01). The problem this creates is the end user having to constantly tell the system which class type to use when going to the classification screen for different materials with different class types. If a user views one material's classification page with a particular class type (001) then looks at another material with a different class type (Z01) the system tries to pull in information from the last materials class type (001). The system tells the user there are no assignments for the class (001) in the material their viewing but there is one for class type (Z01). The user then has to select the class type that applies to the material master their trying to view. Is there a way for the system to automatically see when a material has only one class type assigned to it for it to automatically default it in without the user having to specify the class type?
Thanks,
JRWHi,
Check the configuration, have you maintained default class type for material type.
Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
Edited by: P. Dhamane on Jun 4, 2010 3:21 PM -
Dear professionals,
Our client has this hierarchy for our materials:
Category (6 materials types)
-> Family (each material type has at least 2 families of materials)
-> Group (each family has at least 10 groups)
-> Subgroup (each subgroup has many subgroups)
We are doing the Classification System and each level is a Characteristic, this four characteristic are going to be assigned to a Class. So, we need to be able to search materials by any of those characteristics, but with the standar classification only allow to search by the category or subgroup, not for all of them.
So, we decided to do four characteristics:
1. Category
2. Category + Family
3. Category + Family + Group
4. Category + Family + Group + Subgroup.
With this system is possible to search materials by any characteristic. But the problem is : when I added in each category the families, some of the families has the same name and the system sent the message that is not possible to have valuos more than once. Message c1034.
I do not what to do, because this is the classification what our client needs.
Thank you.Technically did you use standard & separate fields to store this date, Family, groups, subgroups?
Edited by: satheesh on Jul 20, 2009 5:49 PM -
Classification system dependencies
Hi,
I've a problem with the "classification system dependencies", and I've already read to SAP LIBRARY
http://help.sap.com/saphelp_47x200/helpdata/en/ec/62aa64416a11d1896d0000e8322d00/frameset.htm
and
http://help.sap.com/saphelp_47x200/helpdata/en/24/4766a0416711d189ec0000e81ddfac/frameset.htm
Someone knows other links or example???
ThanksHi Arthur,
I couldn´t find the V_RCP_PP_CHCLREL. We´re on a 46C release! MAybe that reason why I could´nt found the view?
But, I think you didn´t understand me corrcectly. I´m not locking for a functionality which gives me all values of characteristic back. For this I could use CTMS_CHAR_VALUE_F4.
Instead I´m looking for a function module which filters all values of characterisitc with the object dependencies. For instance:
I´ve two characteristics with the following values:
CARTYPE ---> car | truck |
CARVENDOR ---> BMW | Mercedes Benz | Audi | Porsche | MAN | Scania |
Lets imagne these characterists are grouped together by a class named PRODUCT.
A material is classified with this class. If now the user selects as car type TRUCK he should only get the values MAN and SCANIA for the charac. CARVENDOR. This is already done in standard SAP classification at material master. My question is, how I can do that by myself in a own application.
Regards
Andy -
Classification System for Storage location
Hello,
I would like to know if you can apply the classification system (as we know it well from the material master), to classify the storage location configuration. I need this for a client who wants to analyze his information system with the possibility to drilldown the characterics of his storage locations. But to do this, he first would have to apply the classification system to these storage locations, but I can not figure out if it is possible, and where to customize it.
Thank you in advance for your help,
Dominik Ley
DTI Consultores
Chileyk,
perhaps it is even some kind of weird, but for 2 reasons I dared to make the question:
- Classification system is a cross-application component (Material Management, Project System, etc.), so why not for something like storage location.
- For Plants you DO HAVE this classification. Go to CL02 and have a look on matchcode of 'Class type' field. So, my idea was to check if there was something similar for storage location.
If you do have any other idea, or anyone else, I appreciate a lot your help.
Regards,
Dominik Ley -
Hello,
The classification system is implemented in R/3, for material, with around 16 class types, and 60 - 70 characteristics. The requirement for BW is to reproduce the classification system, but only for filtering purposes of material infoobject, when executing the reports.
One option is to have all the characteristics as display attributes, and filter them with the F4 help, in the matchode of the material of the variable entry screen. But they don't want to have a list of 70 display attributes, since it would be very complicated for the users to find the appropriate attribute.
The requirement is to be able to select a specific class type, and depending on the class type, get the list of display attributes assigned to that class type (that is, the characteristics assigned to the class type in R/3).
For example, class type AA has characteristics Colour and Size, and Class type BB has characteristics Measure, Function and Mechanism. The matchcode is opened, and then, it is possible to select the class type = AA, and then, only the attributes Colour and Size are available for filtering (but Measure, Function and Mechanism are not displayed). In summary, the same functionality as in R/3.
Does anyone know if it is possible to configure this in BW? Also, whatever solution or workaround is welcome.
Thanks in advance for your help
PatriciaHello Gert,
I know that functionality is available, and it allows to translate the characteristics of the class types in R/3 into attributes in BW, where they can be used as navigational attributes in the reporting.
However, my business requirement is to reproduce exactly the R/3 functionality of the classification in BW, but only with filtering purposes (our classification system in R/3 has 16 class types and 70 characteristics). I mean: I have the material in the variable entry screen; the matchcode is opened; then, the class type can be selected, and, depending on this value, the attributes to be filtered are different (exactly in the same way when you open the matchcode in R/3).
Thanks in advance
Patricia -
IDOC for sending material including classification data?
Hi everyone,
I'm just looking for an IDOC to send to an external system all data of certain materials but including classification system data, variant configuration data...
I have checked MATMAS0x but I am not sure if those IDOCs match with my requirement.
I would be very grateful if someone could please help me.
Thanks in advance and best regards,
BenHi,
CLFMAS01 Master object classification
CLFMAS02 Master object classification
STTMAT01 STTMAT: Material variants
BOMMAT01 Master BOM - material
BOMMAT02 Master BOM - material (2)
BOMMAT03 Material BOM (from 4.6B)
BOMMAT04 Material BOM with UPS Link
MATMAS01 Material Master
MATMAS02 Material Master
MATMAS03 Material Master
MATMAS04 Material Master
MATMAS0x with CLFMAS0x should solve your problem.
Regards,
Srilatha. -
Change History of Material master classification data
Dear all.
How can we see the change history of the Material master classification data.
Whether any standard report exists which can give this Change History data or whether we can find from any tables?
Please let me know your thoughts on this
Regards
Shyamchanges in values for a characteristic can be monitored in CL20N via menu Environment > Change documents
change history for classification is only stored if you activated this.
if it is not set active in your system, then see SAP Note 943559 - FAQ: Frequently asked questions about the classifctn. system
it has instruction how to active it. -
Material Master Classification view
Hi all,
I have some doubt in Material Master Classification view.
I want to know the Database Table name in which the field Class Number
is stored.
I know that these tables are stored in the stucture ( RMCLF
) during creation of material master.
Thanks in advanceKLART is for Class Type & not for Class number ...
also i need the table where i can see it ...
Thanks in advance -
Material Valuation type -system chooses different valuation type
Hello
I have an issue during MIGO with 261 mvt type for a material which has two Valuation types VA1 & VA2 for plant 1000.
when i want to use MIGO with all inputs for plant 1000 with Material A & VA1, system by default chooses a different Valuation type VAL5 which is assigned to the material A in Plant 2000. i am not able to select VAL1 or VAL2 for plant 1000 material A.
automatically VAL5 reappears & can not post the doc.......what might be the issue? where to check this?
Please revert back with your valid suggestions.
Regards
Bheemacheck your customizing in OMWC
click local definiitions
put the cursor onto your plant number
click local categories
you probably see there your VAL5 in column DVT Promo with a X next to it in column PrM
change the default and remove the X -
Hi. I've discovered a loop in my classification system. Class 'A' has a subordinated one, named 'B' and class 'B' has class 'A' as its subordinated, so there's a loop that blocks my classification system.
I can't break this loop. Any idea?
Best regardsHow did you do that? Because standard transactions like CLHP or CL22N don't allow recursive assignments.
See if you can use any of BAPI_CLASS* function modules.
Thanks,
Pranav
Maybe you are looking for
-
Hi! I've plugged my ipod nano into my computer and I'm getting an error message: "The iPod cannot be updated because there is not enough free space to hold all of the songs in the selected playlists" I've updated the iTunes software and when i drag s
-
Did you see the InDesign CS6 Sneak Peek ?
Okay, it's not certain that every shown feature will make it into CS6, but isn't it a lovely future ? http://tv.adobe.com/watch/max-2011-sneak-peeks/max-2011-sneak-peek-indesign-liquid-layout/ This stuff will change the landscape of desktop, web and
-
CREATIVE VISION: M 30GB (NO SOFTWARE)
My friend gave me a 30GB Creative Zen Vision:M & lost the software. It had been opened once. Can I somehow download the software (Installation CD)
-
Unable to install Solaris 10 for intel on IDE hard disk?
I was trying to install solaris on an 80 GB IDE HDD with AMD 32 bit ,XP2000 cpu, 1024 MB RAM using a DVD rom drive with the first/second solaris os install CD. BUT after 2nd CD , i got the message 'Short Read/Read Error' after the GRUB boot loader sc
-
Passing multiple parameter values to a detail report. How?
Help! I have a Summary report and a Detail report. Summary report has a parameter that may have multiple values (ie returning an array). I need to pass these values to the Detail report. Anybody has managed to do it? Thanks in advance... Inga