Material Conversion Error

Hi gurus,
i have executed a query and i have tried to drill on material then i got an error saying that
internal system error....BMG135
which says material conversion settings not found...
how to solve this error and fix so that i can see the material in my report.
thanks
Neel

Hi,
take a look
0MATERIAL conversion exit
execute report (transaction se38) RSCC_V_TMCNV helps.
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
oss note 555675
Solution
Make the settings for the material number conversion.
In BW Release 2.1C, the settings are maintained for the material number conversion via report RSCC_V_TMCNV.
As of BW Release 3.0A, the settings are maintained for the material number conversion via transaction OMSL.
Select the same settings as the settings made in the OLTP system.
Note that you must also perform the setting in client 000 if the error occurred while you were importing a transport request.
hope this helps.
Go to transaction OMSL in BW and set the length of material number same as that in transaction OMSL in R/3, should resolve the problem.
hope it helps
Regards,
San!
Message was edited by: San!

Similar Messages

  • Open PO LSMW Quantity conversion error in net price calculation

    Hi gurus,
    I encountered an error as I was tring to upload purchase orders - "Quantity conversion error in net price calculation". What does this mean and how do I fix this?
    Please help
    Thanks

    Hi Jürgen,
    Where in the Material Master can I find the conversion ratio between both units?
    Also, I am trying to upload POs for Spare Parts and that's when I get the error. But when I try to use other materials like FGs, everything is ok. I can proceed with the upload without any problem
    Please help

  • ME21N--Quantity conversion error in net price calculation

    Hi MM experts,
    Issue: while creating PO, when attempting to add the net price for line item. but system removes the cost and gives the follow error message says "Quantity conversion error in net price calculation".
    The system was not able to convert the order unit into the purchase order price unit. Possible reasons:
    i) the conversion results in a net price that is too high, or
    ii) the conversion factor for the units has not been properly maintained.
    iii) Check whether the units of measure and their conversion factor are correct.
    I have checked material master>unit of measure> 1 PL = 22 KG maintained.
    Can you please tell me how to resolve this issue?
    Appreciated early response.
    Thanks in advance.
    Suresh

    Hi Suresh,
    Please check on Material Master Data - Accounting 1 tab - Price Unit
    Moshe

  • Quantity Conversion Error in Net Price Calculation

    We are currently using SRM 5.0 ECS where we created a material PO and had a problem with the product not having the language E maintain in the material master. This caused the PO to have status of "error in process"  Once we fixed this issue and tried to reprocess the PO we're not getting the following error message in the Application Monitor:
    No Instance of Object type PurchaseOrder has been created. External Reference
    Puchase Order still contains faulty Items
    Quantity Conversion Error in Net Price Calculation
    Has anyone seen this or know what we can do to resolve this so that the PO gets replicated in R3?
    Thanks in advance.

    Hi Robert,
    Regarding this backend error E 212 06 Quantity conversion error in net
    price calculation.         
    This error is because in the PO Order price unit is empty. And          
    quantity is null. So, please enter the quantity and order price unit          
    for this PO and order the PO again. Or you can retransfer the      
    PO manually using the FM BBP_PD_PO_TRANSFER_EXEC. (for this fm you need       
    to input the PO header guid, which you will get it from tx.BBP_PD             
    by providing PO number and object type as BUS2201).
    This has worked for other customers.
    Hope this helps,
    Kind Regards,
    Matthew

  • Unit Conversion Error in Direct Input

    Hi Experts,
    I am getting a error "E MG                  427: Conversion error: field BMMH6-MEINH; content PAK" When I am uploading Alt. UoM using BMHH6 structure in Direct Input. I checked value for UoM in converted data it is "PAC". I think system is internally converting it to PAK so the error is coming.
    Please let me know what need to be done to avoid this error.
    Thanks in Advance..
    <i>-Harkamal</i>

    HI
    If u r giving alternate UOM in Material Master.
    first u need difine the conversion factor.
    in basic data view u will have addtional data tab.
    in that u need to define conversion factors first.
    regards,
    raghu

  • Conversion error in company code currency for general costs activity

    PS Experts,
    Please guide me in the following , The below message appeared when i created a customer project in CJ20N in our new DEV server
    This is the scenario
    Create customer project with 3 WBSE, each one has 3 NTW and 3 activities, i maintained the cost with currency same as project curr and company code currency in the first two act.
    in the third activity (General act)  in cost tab i put a currency is different than project currency& company code currency and tried to save the project, the message appears.
    note: Company code curr same as projet curr & controlling area curr
    Is there any setting is missing in customizing
    Conversion error in company code currency for general costs activity 0010
    Message no. CK443
    Diagnosis
    For cost activity 0010, a conversion error occurred in the currency of the company code to which the material is assigned.
    Procedure
    Check the global settings in Customizing to be sure the exchange rate for conversion into the company code currency is correct
    Thanks

    Hi Yassin,
    I believe you have maintained exchange rates for rate type M as per your config in OPSB.
    Now do one thing, maintain the conversion rate for P for those currencies in OB08 and then save your project.
    This will solve your problem.
    Regards,
    Kabir

  • Conversion error in module API6850_HDR_PROD_MAP, field API6850_HDR-WEIGHTUN

    Hi All,
    While transferring materials form ECC to GTS (Sandbox), i am receiving the above mentioned error.
    Conversion error in module API6850_HDR_PROD_MAP, field API6850_HDR-WEIGHTUNIT_ISO, value LBR.
    As per standard , In the ISO code for US pound its mentioned as LBR in both ECC and GTS
    But  within material master we generally use LB as US pound.
    Can anyone please let us know how we can solve this one?
    Regards
    Proloy

    Hello Proloy,
    UoM handling is often issue within material transfer.
    You have generally 2 options:
    1. In GTS maintain via TA CUNI your LB as is in your feeder. I would suggest to adjust GTS customizing with your ERP. Just do Utilities --> Adjustment and your RFC to feeder.
    2. Or you can map your LB to GTS LBR via user exit.
    Cheers,
    Gabriel.

  • HTTP-Receiver: Code page conversion error from UTF-8 to ISO-8859-1

    Hello experts,
    In one of our interfaces we are using the payload manipulation of the HTTP receiver channel to change the payload code page from UTF-8 to ISO-8859-1. And from time to time we are facing the following error:
    u201CCode page conversion error UTF-8 from system code page to code page ISO-8859-1u201D
    Iu2019m quite sure that this error occurs because of non-ISO-8859-1 characters in the processed message. And here comes my question:
    Is it possible to change the error behaviour of the code page converter, so that the error will be ignored?
    Perhaps the converter could replace the disruptive character with e.g. u201C#u201D?
    Thank you in advance.
    Best regards,
    Thomas

    Hello.
    I'm not 100% sure if this will help, but it's a good Reading material on the subject (:
    [How to Work with Character Encodings in Process Integration (NW7.0)|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42]
    The part of the XSLT / Java mapping might come in handy in your situation.
    you can check for problematic chars in the code.
    Good luck,
    Imanuel Rahamim.

  • Quantity conversion error

    Hi,
    In me21n transaction , I am trying to create an purchase order for a specific material. But I get an error saying ''Quantity conversion error in net price calculation'' . I have checked the quantity conversion for that material but it seem to be right. Do anybody have any solution for this?
    Regards,
    Bhagyashree

    Hi Andy,
    Check the below document which helps u...
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20report%20data%20in%20alternate%20units%20of%20measure
    Also check these threads:
    /thread/366900 [original link is broken]
    Quantity Conversion Function Module
    Unit of measure
    Hope these helps u...
    Regards,
    KK.

  • How to custom a conversion error in JSF page in JDeveloper

    According to the book "Core JavaServer Faces" p213 (fifth edition), if I add the following line to messages.properties file, and specifiy it in the faces-config.xml and .jsp file, then the displayed conversion error message should be my tailored one instead of the default. However, I still get the default error message. Besides, I didn't find "CONVERSION" variable in UIInput class. Is the book wrong? And what's the correct way?
    javax.faces.component.UIInput.CONVERSION=Please correct your input

    I didn't choose any special in JDeveloper IDE. I just selected "new" to create a file called "message.properties" and put the line there. I didn't specify converters excepts declaring the type in the Jave Beans. I guess the converting is done by the JSF framework automatically. It must be a JSF converter since I created the page as a JSF page.

  • What does the "conversion error" I get when converting a pdf file to Microsoft word?

    What is the "conversion error" I get when converfting a pdf file to aMicrosoft word?

    Adobe reader with export to PDF
    Sent from my iPhone 5
    Marty Kennedy

  • Error while impdp: ORA-02374: conversion error loading table

    Hi,
    I am trying to convert the character set from WE8ISO8859P1 to AL32UTF8 using expdp/impdp. for this I first convert WE8ISO8859P1 to WE8MSWIN1252 in source DB to get rid of “lossy” data. I created new database(target) with character set AL32UTF8 and nls_length_semantics = ’CHAR’ and created all the tablespaces as in source DB with auoexend on. I took full export (expdp) of source DB excluding TABLESPACE,STATISTICS,INDEX,CONSTRAINT,REF_CONSTRAINT and imported using impdp to target DB. I found below error in the import log file:
    ORA-02374: conversion error loading table "SCTCVT"."SPRADDR_CVT"
    ORA-26093: input data column size (44) exceeds the maximum input size (40)
    ORA-02372: data for row: CONVERT_STREET_LINE1 : 0X'20202020202020202020202020202020202020202020202020'
    I checked with select query on both DBs with below results.
    source DB:
    04:58:42 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
    COUNT(*)
    74553
    target DB:
    04:59:24 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
    COUNT(*)
    74552
    please suggest me a solution to this.
    Thanks and Regards.
    Edited by: user12045167 on May 9, 2011 10:39 PM

    Thanks for your update maher.
    09:15:53 SQL> desc "SCTCVT"."SPRADDR_CVT"
    Name Null? Type
    SPRADDR_PIDM NUMBER(8)
    CONVERT_PIDM VARCHAR2(9 CHAR)
    SPRADDR_ATYP_CODE VARCHAR2(2 CHAR)
    CONVERT_ATYP_CODE VARCHAR2(2 CHAR)
    SPRADDR_SEQNO NUMBER(2)
    CONVERT_SEQNO VARCHAR2(2 CHAR)
    SPRADDR_FROM_DATE DATE
    CONVERT_FROM_DATE VARCHAR2(8 CHAR)
    SPRADDR_TO_DATE DATE
    CONVERT_TO_DATE VARCHAR2(8 CHAR)
    SPRADDR_STREET_LINE1 VARCHAR2(30 CHAR)
    CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)
    SPRADDR_STREET_LINE2 VARCHAR2(30 CHAR)
    CONVERT_STREET_LINE2 VARCHAR2(40 CHAR)
    SPRADDR_STREET_LINE3 VARCHAR2(30 CHAR)
    CONVERT_STREET_LINE3 VARCHAR2(40 CHAR)
    SPRADDR_CITY VARCHAR2(20 CHAR)
    CONVERT_CITY VARCHAR2(25 CHAR)
    SPRADDR_STAT_CODE VARCHAR2(3 CHAR)
    CONVERT_STAT_CODE VARCHAR2(25 CHAR)
    SPRADDR_ZIP VARCHAR2(10 CHAR)
    CONVERT_ZIP VARCHAR2(15 CHAR)
    SPRADDR_CNTY_CODE VARCHAR2(5 CHAR)
    CONVERT_CNTY_CODE VARCHAR2(5 CHAR)
    SPRADDR_NATN_CODE VARCHAR2(5 CHAR)
    CONVERT_NATN_CODE VARCHAR2(5 CHAR)
    SPRADDR_PHONE_AREA VARCHAR2(3 CHAR)
    CONVERT_PHONE_AREA VARCHAR2(3 CHAR)
    SPRADDR_PHONE_NUMBER VARCHAR2(7 CHAR)
    CONVERT_PHONE_NUMBER VARCHAR2(7 CHAR)
    SPRADDR_PHONE_EXT VARCHAR2(4 CHAR)
    CONVERT_PHONE_EXT VARCHAR2(4 CHAR)
    SPRADDR_STATUS_IND VARCHAR2(1 CHAR)
    CONVERT_STATUS_IND VARCHAR2(1 CHAR)
    SPRADDR_ACTIVITY_DATE DATE
    CONVERT_ACTIVITY_DATE VARCHAR2(8 CHAR)
    SPRADDR_USER VARCHAR2(30 CHAR)
    CONVERT_USER VARCHAR2(30 CHAR)
    SPRADDR_ASRC_CODE VARCHAR2(4 CHAR)
    CONVERT_ASRC_CODE VARCHAR2(4 CHAR)
    SPRADDR_DELIVERY_POINT NUMBER(2)
    CONVERT_DELIVERY_POINT VARCHAR2(2 CHAR)
    SPRADDR_CORRECTION_DIGIT NUMBER(1)
    CONVERT_CORRECTION_DIGIT VARCHAR2(1 CHAR)
    SPRADDR_CARRIER_ROUTE VARCHAR2(4 CHAR)
    CONVERT_CARRIER_ROUTE VARCHAR2(4 CHAR)
    SPRADDR_GST_TAX_ID VARCHAR2(15 CHAR)
    CONVERT_GST_TAX_ID VARCHAR2(15 CHAR)
    SPRADDR_REVIEWED_IND VARCHAR2(1 CHAR)
    CONVERT_REVIEWED_IND VARCHAR2(1 CHAR)
    SPRADDR_REVIEWED_USER VARCHAR2(30 CHAR)
    CONVERT_REVIEWED_USER VARCHAR2(30 CHAR)
    SPRADDR_DATA_ORIGIN VARCHAR2(30 CHAR)
    CONVERT_DATA_ORIGIN VARCHAR2(30 CHAR)
    SPRADDR_CVT_RECORD_ID NUMBER(8)
    SPRADDR_CVT_STATUS VARCHAR2(1 CHAR)
    SPRADDR_CVT_JOB_ID NUMBER(8)
    so here we can see its value is 40 (CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)).
    shall i go ahead altering the column?

  • Material Determination error during Transaction DP90

    Dear Experts,
    I am configuring the Depot Repair scenario for a Hitech Industry.
    The Process is as follows;
    1. Ceating the  Notification
    2. Creating a repair order using Notificaion. and getting the repaired items in to the plant
    3. Creaing and confirming the service order and delivering the repaired product to the customer.
    4. Creating a Billing Request using service order during transaction DP90.
    I am facing the following error!!! -
    Material Determination error in the service order line item xxxxx/xx!!!!!!
    I have configured the DIP Profile YBR00099 as below.
    The characteristics Activity Number, Activity Type and Cost Elemnt were given the Material Determination Check.
    The source is---- " Actual Costs and Line Items " with 100 Percent, No sets are used for the source characteristics.
    In the Material Determination a Blank Item is used with a Check for the field " Material Direct"
    In the Material Determination Criteria for the Blank Material, it is configured as below;
    Activity Type            No Set Used - No Value used
    Activity NUmber        No Set Used - No Value used
    Cost Element           YBR-Material-01(Set values are 608110 and   * )
    Note : the above configuration was done using the Config guide AS IS.
    The material that was used in the Service order is not maintained in the  ODP1 transaction ---> Material Determination.. instead ,only a blank material is used and configured as above.
    The subsequent Process should continue as follows;
    5. After saving the billing request, two more line items are determined in the repair order.
    6. Debit memo is created using the repair order. where the Actual confirmed hours of service and spare parts confirmed if any are billed for the customer.
    Basically I am very much new to this RRB concept and I was facing the above error and could n't be able to proceed further.
    Please help me in this regard.
    BadariNath .G
    Answerthink India Limited, Hyd
    9989425075

    Material Determination error in the service order line item
    Check note 460415 and 545095
    thanks
    G. Lakshmipathi

  • Material statuses error message should go after entering Trackin No in PO

    Hi All,
    I have created one Material statuses with error message, I have created material with the use of that material statuses..
    Its working fine,At the creation of PR, PO I'm getting that Error message..
    My requirement is if I enter Requirement Tracking Number at item level of PR or PO means that Material statuses Error message should Go out and system has to allow to create PR or PO..
    Is it possible?? how to do it?? plz help me...
    Is it possible in standard SAp???
    thanks and regards
    rames reddy

    Hi,
    You can keep Requirement Tracking Number as Required Entry in field selection key (NBF or a copy of NBF as ZNBF) of PO document type in u201CReference data, itemu201D segment in following path:
    SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level
    And then assign field selection key to PO Document type and save.
    SPRO > Materials Management > Purchasing > Purchase Order > Define Document Types
    Now create PO with PO document type, system will ask you to enter Requirement Tracking Number in u201CItem Overviewu201D unless then you can save Purchase Order.
    The same you can do for PR document type by having a field selection key for PR document type.
    Regards,
    Biju K

  • Quantity conversion error in net price calculation in BAPI_PO_CREATE1

    I'm creating PO from BAPI_PO_CREATE1 .here i'm getting follwing error
    quantity conversion error in net price calculation.
    plz guide me to remove it.

    Are you using quantities directly entered by the user while calling the function to do the net price calculation? If that is the case, you should use FM CONVERSION_EXIT_ALPHA_INPUT to convert the quantity from the external format into the internal one!
    Another possibility is that some customizing is missing for converting quantities in different unit of measures (like the quantity in pieces is known, but the pricing calculation is being done on kilos.. but the convertion between these 2 unit of measures is missing).
    Good luck!

Maybe you are looking for