Material cost by period  for WBS/ Project

Hi, I am working on one reporting requirement.
Requirement is like that material  actual cost & quantity  which issued to WBS/ Project in perticular period.
I am having some idea. Like COEP table via value type 4 I can fetch the actual cost for the porject.
How to fetch the cost for only material consumbed by proejct.
Please extend your help. so, I get more clear path to work ahead. 
Regards
Nitin P.

Hi,
Pls check Automatic Posting account (OBYC).
There is G/L account maintained againt Valuation Class in Transaction GBB.
When u assign material which is having maintained Valuation class , G/L account gets automatically picked up.
using this u can get values from COEP.
Regards,

Similar Messages

  • Table for WBS project status and budget.

    hi,
    i am being requested to have a report with project details with the PO and PR.
    but i were unable to find the table for the project status (TECO, REL) for a WBS element. may i know want table and what field they were being link?
    aside, may i know under what table does the "budget assigned" to a WBS element located at?
    thanks

    Hi Ben,
    in order to retrieve the status of a WBS element, please select into table JEST by object number (JEST-OBJNR = PRPS-OBJNR). This will give you an internal status code (JEST-STAT). Then go to table TJ02 with this internal code and select field TJ02-TXT04: this will give you the external status code.
    For the budget, go to tables COSP and COSS, selecting by object number (OBJNR).
    I hope this helps. Best regards,
    Alvaro

  • Different weights (man hours, material, costs) of/within different WBS sections

    Hi there,
    I am using Microsoft Project Standard 2010.
    Within some elements of my schedule I would like to weight by man-hours, within some by material and within some others again by cost.
    Also I would like to manually adjust the the weighting on the highest level of my schedule manually. E.g. WBS 01 20%, WBS 02 30% and so on.
    By now I have only found out about how to weight by "Work"; putting in man-hours and then using the weighted %Work Complete.
    But how about the other above mentioned weightings?
    Thanks in advance!

    hkd66,
    For work type resources the Work field is essentially man-hours and it sounds like you figured that out. For material resources, the metric is defined by the material label and the standard rate per the material label (e.g. "bricks" at $1.00/brick). Weighting
    by cost is something you must "back" into via the quantity. Cost type resources are of course direct cost entries. Is that what you mean by "some others"?
    Now the question comes, what exactly is your intent with regard to adjusting the weight at the highest level? Are you trying to set up the initial plan to achieve a certain man-hour and cost budget, or are you trying to achieve something else?
    Although it may appear that you can "weight" your schedule's man-hours by entering a value in the % Work Complete field at summary level, that is not the intent of that field, nor the best use for it. You will not be able to do a similar thing with the cost
    field. Summary lines are intended for summarizing the data of the subtasks under them, not for rolling data down to subtasks.
    We need to better understand what you are trying to accomplish (i.e. you end goal), before we can give you much guidance.
    John

  • Unable to caluclate cost in CJ20 for wbs and network level.

    Hi All,
    I have a query in the project Builder(CJ20N).
    I created Project>WBS Elements>Network> and posted costs via assigning activity.
    If I select an activity and go to edit>Costs,  the "calculate costs" option is activated.  ( I get "Message Costs were calculated: See menu Edit -> Costs -> Planned - Actual")
    And also I am able to view the cost in Edit>Costs> Plan/Actual.. "Activity/Element". Please see the screenshots of Plan /actual comparison.
    However if I select the WBS or Network and go to edit>Costs,  the "calculate costs" option is disabled (frozen) and also in the same path Plan/Actual> "activity/Element"  option is disabled (Frozen).
    Request you to review the attached screenshot and advise is there any way to defreeze the option "calculate costs" and view the costs in WBS and Network level?

    Hi,
    why you want to see plan cost in project builder CJ20n? any specific reason please let us know...
    every structure report having this kind of feather as CN41n/CNS41 then check these two report.
    and lots of hierarchical report is there for seeking plant cost in project as Gokul suggested above.
    so in project builder only plan VS actual cost can be look like by network activity.
    Regards,
    Sanjeev

  • Goods Receipt of BOM material- cost centre required for components

    I have created a subcontracting PO with a BOM material.
    When trying to post a Goods Receipt the components of the BOM material are required to have a cost centre assigned to them.
    The profit centre for the BOM material and components are the same. The BOM material does not require a cost centre to be entered in the Goods Receipt as the Profit Centre is allocated to account assignment tab.
    Why does the profit centre assigned to the components not default in the account assignment, why is the system asking for a cost centre?

    I receive this error when trying to post the material document:Field Cost Ctr is a required field for G/L account 1000 7023000200
    Message no. F5808
    Diagnosis
    The value for field "Cost Ctr" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "7023000200" in company code "1000" linked to the field selection for posting key "81".
    System Response
    Error
    Procedure
    It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Cost Ctr". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

  • How to upload and download Long text for WBS, Project, Network

    Hi all,
    I have two isssues.
    1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
    BAPI_PROJECTDEF_GETDETAIL
    BAPI_PROJECT_GETINFO
    BAPI_NETWORK_GETINFO
    BAPI_BUS2054_GETDATA
    I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
    The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
    2)  I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
    All help will be greatly appreciated and rewarded.
    Thanks & Regards,
    Rajanidhi Rajasekeran.

    One thread in the correct forum is good enough, no need to double post across ABAP forums.  Thanks.
    Regards,
    Rich Heilman

  • No standard cost estimate found for the material

    Hi,
    When we are trying to generate the bill systems throws the error as "no statandard cost estimate found" whereas the material is a kmat material.
    Actually as per the requirement we should not Run standard cost estimate for any material,we will update the standard price in MR21
    What are the settings that i need to do  to avoid the above error message while doing billing?
    Following error msg is appearing:-
    No standard cost estimate could be found for material "300000"
    Message no. K/834
    Diagnosis
    In Profitability Analysis, an attempt was made while valuating with material costing to read for material "123456" a standard cost estimate released on posting date "02.10.2008".
    The system has discovered that there are no error-free standard cost estimates released in plant "BP01" on the specific date "02.10.2008" for material "123456".
    The material cost estimate is accessed according to the CO-PA Customizing settings for costing key "YG1" under Define Access to Material Costing.
    Display Cost Estimate for Material
    Display Material Cost Estimate without Quantity Structure
    System Response
    It is not possible to process the document further.
    Procedure
    Check your system settings.
    Thanks
    Kishore

    Remove the Costing keys assignment in the step "assign costing keys to any
    characteristics" in COPA Configuration settings.

  • Is it possible to automatically create new folder for each project?

    Hi! Here´s another (maybe stupid) question:
    I wonder if it's possible for Premiere to also automatically create a new folder on the harddrive when a new project is created. This to get all material, preview files etc for each project in a separate folder.
    It´s easy to forget to manually do this and I tend to end up with many projects and files in the same folder. Makes it hard when I want to "clean house" and delete some stuff and backup other.
    Thank's for any help with this!

    Everyone develops their own method of project organization,
    but this has worked for me through several versions of Premiere.
    I keep a 'Project Template' folder that contains all of the sub-directories
    that I will normally need for each job... Media, Approvals, Documents, Audio,
    Rendered Image Sequences, Still Images, Finals etc.
    This 'Project Template' folder also contains a template Premiere project that is
    pre-set with the interface settings, column layout and project folders I will always use...
    Audio (vo, music, sfx), Graphics (sequences, stills, titles, slates),
    Cuts (approval versions, finals, and broadcast distribution finals).
    When I start a new project I simply duplicate the entire 'Project Template' folder along
    with all of its contents, then rename the folder and Premiere project to suit the current job.

  • S_ALR_87013532 report -plan cost not rolling upto the WBS/Project level

    Dear All,
    Plan cost from production orders is not rolling up to the WBS/Project level in S_ALR_87013532 ( Plan/Actual Variance report).
    Where as plan cost from network is properly rolling up to the WBS/Project level in the above report. 
    Please suggest what could be the reason for this issue. Is any configuration needs to be done for this.
    Thanks & Regards,
    Vishal

    Dear sir,
    Thanks for the reply & sorry for late response from my side.
    OPSV settings are already maintained in our system.
    Some how i realized  later that cost are actaully getting rolled to the WBS level, but we have observed one more discrepancy.
    Example -
    Production order "X" value - 100 (  as seen through co03)
    Production order "X"value- 40 ( as seen through report s_alr_87013532).
    We found that  in report  s_alr_87013532 , although my total  producton order value of 100 is represented at the WBS /Project level, but at the production order level , it is showing value of 40. 
    On further analysis we found that for production order X
    Materail cost- 60
    Labour cost-40
    The material cost of 60  is not getting fetched against production order "X" in report " S_ALR_87013532".
    There are very few cases , where such discrepancy is seen.
    Kindly suggest.
    Regards,
    Vishal

  • Material item number for Settlement Material Cost

    Dear All,
    My client want to see the line items for settle Material i.e. he needs materials item number and qty for settled material cost in perticular project / WBS.
    Thanks and Regards,
    Atul R. Rajmane

    Dear Nitin,
    Thanks for Replay.
    CJI3 report give actual cost line item. For settle values its will show cost but not material number. My Client needs the material number and qty for settled value of material cost.
    Specifically, he need an WIP report which shown material number and qty berak for WIP amount of a specfic project/wbs.
    Thanks and Regards,
    Atul R. Rajmane

  • Raw material cost report for production of finished produt.?(urgent..REWARD

    Hi,
    any one can help in this issue.
    i am not getting the raw materila cost & manfacture conversion cost for  for the bom of FG - SFG - SFG - SFG- RAW
    FG - finished goods,
    SFG - semi finished goods
    RAW - raw material.
    plz provide the solution.
    raw material  and manfacture conversion cost is calculated in PERFORM z_process_data. subroutine.
    REPORT z_co_production_cost_nsk.
    TABLES: afko, bkpf, t001w , caufv.
    TYPE-POOLS: kkblo,
                slis.
    DATA: d_datefrom LIKE sy-datum,
          d_dateto LIKE sy-datum,
          d_repid LIKE sy-repid,
          d_uname LIKE sy-uname,
          d_returncode TYPE i,
          d_tabix TYPE i,
          d_kokrs LIKE tka01-kokrs,
          d_waers LIKE tka01-waers,
          wa_fieldcatalog TYPE slis_fieldcat_main,
          wa_listevents TYPE slis_alv_event,
          wa_listlayout TYPE slis_layout_alv,
          wa_print_info TYPE slis_print_alv,
          wa_listheader TYPE slis_listheader,
          d_headerlines TYPE i.
    DATA: BEGIN OF t_caufv OCCURS 0,
            aufnr TYPE caufv-aufnr,
            werks TYPE caufv-werks,
            objnr TYPE covp-objnr,
            gamng TYPE caufv-gamng,
            plnbez TYPE caufv-plnbez,
            rsnum TYPE caufv-rsnum,
          END OF t_caufv.
    *Added by Anand Bothra on 24/11/2003
    DATA: t_ab_caufv LIKE t_caufv OCCURS 0 WITH HEADER LINE.
    DATA: t_temp_caufv LIKE t_caufv OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF t_afpo OCCURS 0,
            aufnr TYPE afpo-aufnr,
            posnr TYPE afpo-posnr,
            wemng TYPE afpo-wemng,
            amein TYPE afpo-amein,
            charg TYPE afpo-charg,
          END OF t_afpo.
    DATA: BEGIN OF t_afpo1 OCCURS 0,
            aufnr TYPE afpo-aufnr,
            refaufnr TYPE afpo-aufnr,
            objnr TYPE caufv-objnr,
            rsnum TYPE afko-rsnum,
            wemng TYPE afpo-wemng,
            werks TYPE afpo-dwerk,
            charg TYPE afpo-charg,
          END OF t_afpo1.
    DATA: BEGIN OF t_makt OCCURS 0,
            matnr TYPE makt-matnr,
            maktx TYPE makt-maktx,
          END OF t_makt.
    DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv,
          t_listevents TYPE slis_t_event,
          t_sortsequence TYPE slis_t_sortinfo_alv,
          t_listheader TYPE slis_t_listheader.
    DATA: BEGIN OF t_production_costs OCCURS 0,
            objnr TYPE covp-objnr,       " Object Number
            kstar TYPE covp-kstar,       " Cost Element
            wkgbtr TYPE covp-wkgbtr,     " Cost of Line Item in CO area curr
            mbgbtr TYPE covp-mbgbtr,     " Quantity of Line Item
            matnr TYPE covp-matnr,       " Material Number
            kokrs TYPE covp-kokrs,       " Controlling Area
            belnr TYPE covp-belnr,       " Cost Accounting Document
            buzei TYPE covp-buzei,       " Item Number in Document
          END OF t_production_costs.
    DATA: BEGIN OF t_production_costs1 OCCURS 0,
            objnr TYPE covp-objnr,       " Object Number
            kstar TYPE covp-kstar,       " Cost Element
            wkgbtr TYPE covp-wkgbtr,     " Cost of Line Item in CO area curr
            mbgbtr TYPE covp-mbgbtr,     " Quantity of Line Item
            kokrs TYPE covp-kokrs,       " Controlling Area
            belnr TYPE covp-belnr,       " Cost Accounting Document
            buzei TYPE covp-buzei,       " Item Number in Document
          END OF t_production_costs1.
    DATA t_production_costs2 LIKE t_production_costs1
         OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF t_suborders OCCURS 0,
            aufnr TYPE caufv-aufnr,
            prevaufnr TYPE caufv-aufnr,
            objnr TYPE covp-objnr,
            rsnum TYPE caufv-rsnum,
          END OF t_suborders.
    DATA: BEGIN OF t_outputtab OCCURS 0,
            plnbez LIKE afko-plnbez,             " Material Number
            objnr LIKE caufv-objnr,              " Object Number
            maktx LIKE makt-maktx,               " Material Description
            charg LIKE afpo-charg,               " Batch Number
            aufnr LIKE afko-aufnr,               " Production Order Number
            gamng LIKE caufv-gamng,              " Total Order Quantity
            wemng LIKE afpo-wemng,               " Goods Receipt Quantity
            amein LIKE afpo-amein,               " Unit of Measure
            yield TYPE p DECIMALS 2,             " Percentage Yield
            totalrmcost TYPE p DECIMALS 2,       " Total Raw Material Cost
            totalpmcost TYPE p DECIMALS 2,       " Total Packing Mat. Cost
            mfgconvcost TYPE p DECIMALS 2,       " Manu. Conversion Cost
            pkgconvcost TYPE p DECIMALS 2,       " Packing Conv. Cost
            rmperunit TYPE p DECIMALS 2,         " Raw Cost per unit
            pmperunit TYPE p DECIMALS 2,         " Pack Mat cost per unit
            ccperunit TYPE p DECIMALS 2,         " Conv Cost per unit
            totperunit TYPE p DECIMALS 2,        " Total Cost per unit
            waers LIKE tka01-waers,              " Currency Key for CO Area
          END OF t_outputtab.
    *Added by Anand Bothra on 24/11/2003.
    DATA: t_ab_outputtab LIKE t_outputtab OCCURS 0 WITH HEADER LINE,
          t_temp_outputtab LIKE t_outputtab OCCURS 0 WITH HEADER LINE.
    BEGIN OF INSERTION VIP110703
    DATA:wa_prev_outputtab LIKE LINE OF t_outputtab,
         wa_production_costs LIKE LINE OF t_production_costs.
    DATA:prev_totmatqty TYPE p DECIMALS 2,
         prev_tot_mfgconv_cst TYPE p DECIMALS 2,
         grand_mat_qty TYPE p DECIMALS 2 ,
         tmp_aufnr TYPE caufv-aufnr.
    DATA: BEGIN OF t_suborders_propcost OCCURS 0,
            aufnr TYPE caufv-aufnr,
            prevaufnr TYPE caufv-aufnr,
            objnr TYPE covp-objnr,
            rsnum TYPE caufv-rsnum,
            proprmcost TYPE p DECIMALS 2,
            prop_mfg_convcost TYPE p DECIMALS 2,
          END OF t_suborders_propcost.
    DATA: wa_suborders LIKE LINE OF t_suborders.
    END   OF INSERTION VIP110703
    BEGIN OF INSERTION VIP111003
    DATA: prev_aufnr TYPE caufv-aufnr,
          prev_matnr TYPE mara-matnr,
          curr_matnr TYPE mara-matnr.
    DATA: bln_suborder ,
          ratio TYPE p DECIMALS 5.
    BEGIN OF INSERTION VIP111003
    *Added by Anand Bothra on 28/11/2003
    DATA: d_flag TYPE c.
    SELECTION-SCREEN BEGIN OF BLOCK zblock1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_plnbez FOR afko-plnbez,
                    s_aufnr FOR afko-aufnr,
    "Added By Vivek on 29.11.2005
                    s_auart FOR caufv-auart obligatory.
    PARAMETERS p_werks LIKE t001w-werks OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK zblock1.
    SELECTION-SCREEN BEGIN OF BLOCK zblock2 WITH FRAME TITLE text-002.
    SELECT-OPTIONS: s_monat FOR bkpf-monat NO-EXTENSION OBLIGATORY.
    PARAMETERS p_gjahr LIKE bkpf-gjahr OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK zblock2.
    SELECTION-SCREEN BEGIN OF BLOCK zblock3 WITH FRAME TITLE text-022.
    PARAMETERS: p_detsum RADIOBUTTON GROUP rad,
                p_sum RADIOBUTTON GROUP rad.
    SELECTION-SCREEN END OF BLOCK zblock3.
    INITIALIZATION.
      d_repid = sy-repid.
      d_uname = sy-uname.
    p_werks = 'G001'.
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT SCREEN.
       IF screen-name EQ 'P_WERKS'.
         screen-input = 0.
         MODIFY SCREEN.
       ENDIF.
    ENDLOOP.
    AT SELECTION-SCREEN ON s_monat.
      IF s_monat-high IS INITIAL.
        IF NOT ( s_monat-low BETWEEN 1 AND 12 ).
          MESSAGE e398(00) WITH text-023 text-024 space space.
        ENDIF.
      ELSE.
        IF ( ( s_monat-low LT 1 ) OR ( s_monat-high GT 12 ) ).
          MESSAGE e398(00) WITH text-023 text-024 text-025 space.
        ENDIF.
      ENDIF.
    START-OF-SELECTION.
      PERFORM z_get_period_dates.
      PERFORM z_select_prod_orders.
      PERFORM z_select_prod_costs.
      PERFORM z_select_addl_prod_costs.
      PERFORM z_select_mat_desc.
    END-OF-SELECTION.
      IF d_returncode EQ 0.
        PERFORM z_process_data.
    *Added by Anand Bothra on 24/11/2004.
        PERFORM z_select_to_print.
        PERFORM z_prepare_fieldcat.
        PERFORM z_get_alv_events.
        PERFORM z_define_sortsequence.
        PERFORM z_define_layout.
        PERFORM z_display_list.
    *Added by Anand Botra on 25/11/2003.
        PERFORM z_export_to_excel.
        PERFORM z_send_mail_and_download.
      ELSE.
        MESSAGE i017(p5).
      ENDIF.
    *&      Form  Z_GET_PERIOD_DATES
          text
    -->  p1        text
    <--  p2        text
    FORM z_get_period_dates.
    Determine the date range from the fiscal period range and
    fiscal year entered on the selection screen
      DATA: d_firstdate LIKE sy-datum,
            d_lastdate LIKE sy-datum,
            t_dates LIKE scscp_period_str OCCURS 0 WITH HEADER LINE.
      CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
        EXPORTING
          i_gjahr        = p_gjahr
          i_periv        = 'V3'
        IMPORTING
          e_first_day    = d_firstdate
          e_last_day     = d_lastdate
        EXCEPTIONS
          input_false    = 1
          t009_notfound  = 2
          t009b_notfound = 3
          OTHERS         = 4.
      CALL FUNCTION 'CSCP_PARA1_GET_PERIODS'
        EXPORTING
          i_datuv    = d_firstdate
          i_datub    = d_lastdate
          i_timeunit = 'M'
        TABLES
          et_dates   = t_dates.
      SORT t_dates BY sindex.
      DELETE t_dates INDEX 1.
      LOOP AT t_dates.
        SUBTRACT: 1 FROM t_dates-sindex,
                  1 FROM t_dates-datub.
        MODIFY t_dates TRANSPORTING sindex datub.
      ENDLOOP.
      CLEAR: d_datefrom,
             t_dates.
      READ TABLE t_dates WITH KEY sindex = s_monat-low.
      d_datefrom = t_dates-datuv.
      CLEAR d_dateto.
      IF s_monat-high IS INITIAL.
        d_dateto = t_dates-datub.
      ELSE.
        CLEAR t_dates.
        READ TABLE t_dates WITH KEY sindex = s_monat-high.
        d_dateto = t_dates-datub.
      ENDIF.
    ENDFORM.                    " Z_GET_PERIOD_DATES
    *&      Form  Z_SELECT_PROD_ORDERS
          text
    -->  p1        text
    <--  p2        text
    FORM z_select_prod_orders.
    Select all production orders as per the selection criteria provided
      DATA: d_dlv_code LIKE jstat-stat,
            d_teco_code LIKE jstat-stat,
            t_status LIKE jstat OCCURS 0 WITH HEADER LINE.
      SELECT SINGLE name1 INTO t001w-name1 FROM t001w WHERE werks = p_werks.
    if s_plnbez-low eq space and s_plnbez-high eq space.
    endif.
      SELECT aufnr werks objnr gamng rsnum plnbez
      INTO CORRESPONDING FIELDS OF
      TABLE t_caufv FROM caufv
      WHERE aufnr IN s_aufnr
    AND   auart IN ('PP01', 'LL02') : BY VIVEK
      AND   auart in s_auart " Added By Vivek on 29.11.2005
      AND   werks = p_werks
      AND   plnbez IN s_plnbez
      AND   getri BETWEEN d_datefrom AND d_dateto
      ORDER BY aufnr.
      d_returncode = sy-subrc.
      IF d_returncode NE 0.
        STOP.
      ENDIF.
    Filter out only those production orders that have a status
    DLV (Delivered) or TECO (Technically Confirmed).
      CLEAR: d_dlv_code,
             d_teco_code.
      PERFORM z_get_status_code USING 'DLV' CHANGING d_dlv_code.
      PERFORM z_get_status_code USING 'TECO' CHANGING d_teco_code.
      LOOP AT t_caufv.
        REFRESH t_status.
        CALL FUNCTION 'STATUS_READ'
             EXPORTING
              CLIENT           = SY-MANDT
                  objnr            = t_caufv-objnr
                 only_active      = 'X'
         IMPORTING
              OBTYP            =
              STSMA            =
              STONR            =
            TABLES
                 status           = t_status
            EXCEPTIONS
                 object_not_found = 1
                 OTHERS           = 2
        IF sy-subrc EQ 0.
          CLEAR t_status.
          READ TABLE t_status WITH KEY stat = d_dlv_code.
          IF sy-subrc NE 0.
            CLEAR t_status.
            READ TABLE t_status WITH KEY stat = d_teco_code.
            IF sy-subrc NE 0.
              DELETE t_caufv.
            ENDIF.
          ENDIF.
        ELSE.
          DELETE t_caufv.
        ENDIF.
      ENDLOOP.
      IF t_caufv[] IS INITIAL.
        d_returncode = 4.
        STOP.
      ENDIF.
    Added by Anand Bothra on 24/11/2003**********
      t_ab_caufv[] = t_caufv[].
    Added by Anand Bothra on 28/11/2003.
      IF ( s_plnbez-low EQ space AND s_plnbez-high EQ space ).
        IF ( s_aufnr-low EQ space AND s_aufnr-high EQ space ).
          d_flag = 'N'.
        ELSE.
          d_flag = 'Y'.
        ENDIF.
      ELSE.
        d_flag = 'Y'.
      ENDIF.
      IF d_flag = 'Y'.
    Added by Anand Bothra on 21/11/2003.**********
    *Get the batch number of the entered order
        DATA: itab_afpo LIKE afpo OCCURS 100 WITH HEADER LINE.
        DATA: BEGIN OF t_ab_charg OCCURS 0,
    *Added by Anand on 27/11/2003
                aufnr LIKE afpo-aufnr,
                charg LIKE afpo-charg,
                END OF t_ab_charg.
        LOOP AT t_caufv.
          SELECT aufnr charg FROM afpo INTO t_ab_charg WHERE aufnr =
      t_caufv-aufnr.
            APPEND t_ab_charg.
            CLEAR t_ab_charg.
          ENDSELECT.
        ENDLOOP.
    IF sy-subrc = 0.
       SELECT * FROM afpo INTO TABLE itab_afpo WHERE charg = d_ab_charg.
    ENDIF.
        LOOP AT t_ab_charg.
          SELECT * FROM afpo INTO itab_afpo WHERE charg = t_ab_charg-charg.
            APPEND itab_afpo.
            CLEAR itab_afpo.
          ENDSELECT.
        ENDLOOP.
        CLEAR t_caufv.
        REFRESH t_caufv.
    *Get all the orders with the same batch number.
        LOOP AT itab_afpo.
          SELECT aufnr werks objnr gamng rsnum plnbez
          INTO CORRESPONDING FIELDS OF
          t_caufv FROM caufv WHERE aufnr = itab_afpo-aufnr.
            APPEND t_caufv.
          ENDSELECT.
        ENDLOOP.
        CLEAR t_caufv.
        SORT t_caufv BY aufnr.
    delete adjacent duplicates from t_caufv comparing all fields.
      ENDIF.
      SELECT aufnr posnr wemng amein charg INTO TABLE t_afpo
      FROM afpo FOR ALL ENTRIES IN t_caufv
      WHERE aufnr = t_caufv-aufnr.
      d_returncode = sy-subrc.
      IF d_returncode NE 0.
        STOP.
      ENDIF.
      SORT t_afpo BY aufnr.
    ENDFORM.                    " Z_SELECT_PROD_ORDERS
    *&      Form  Z_SELECT_MAT_DESC
          text
    -->  p1        text
    <--  p2        text
    FORM z_select_mat_desc.
    Get the Description of all materials
      SELECT matnr maktx INTO TABLE t_makt FROM makt
      FOR ALL ENTRIES IN t_caufv
      WHERE matnr = t_caufv-plnbez
      AND   spras = sy-langu.
    ENDFORM.                    " Z_SELECT_MAT_DESC
    *&      Form  Z_PROCESS_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM z_process_data.
    Process the data from all production orders and prepare the output
    table for display appropriately
      DATA: d_mbgbtr TYPE p DECIMALS 3,
            loop_cnt TYPE i.
      REFRESH t_outputtab.
      LOOP AT t_caufv.
        CLEAR t_outputtab.
        MOVE-CORRESPONDING t_caufv TO t_outputtab.
        CLEAR t_makt.
        READ TABLE t_makt WITH KEY matnr = t_caufv-plnbez.
        IF sy-subrc EQ 0.
          MOVE t_makt-maktx TO t_outputtab-maktx.
        ENDIF.
        CLEAR t_afpo.
        READ TABLE t_afpo WITH KEY aufnr = t_caufv-aufnr.
        IF sy-subrc EQ 0.
          MOVE: t_afpo-wemng TO t_outputtab-wemng,
                t_afpo-amein TO t_outputtab-amein,
                t_afpo-charg TO t_outputtab-charg.
        ENDIF.
        IF t_outputtab-gamng NE 0.
          COMPUTE t_outputtab-yield =
          ( t_outputtab-wemng / t_outputtab-gamng ) * 100.
        ENDIF.
        APPEND t_outputtab.
      ENDLOOP.
      SORT t_production_costs BY objnr kstar.
      LOOP AT t_production_costs.
        AT NEW objnr.
          CLEAR: d_mbgbtr, d_tabix, t_outputtab.
          READ TABLE t_outputtab WITH KEY objnr = t_production_costs-objnr.
          MOVE sy-tabix TO d_tabix.
          " Add up the Raw Material and Manufacturing Conversion
          " Costs from the previous stage production order
          CLEAR loop_cnt .
          LOOP AT t_suborders WHERE aufnr = t_outputtab-aufnr.
         commented by anand bothra on 20/11/2003
            ADD 1 TO loop_cnt.
            IF loop_cnt > 1.
              EXIT.
            ENDIF.
            LOOP AT t_production_costs1 WHERE objnr = t_suborders-objnr.
              CASE t_production_costs1-kstar.
                WHEN '0005000000' OR '0005010000'.     " Raw Material Cost
    BEGIN OF deletion VIP110703
              ADD t_production_costs1-wkgbtr TO t_outputtab-totalrmcost.
    END   OF deletion VIP110703
                  ADD t_production_costs1-wkgbtr TO prev_totmatqty.
                WHEN '0000500100'.      " Manufacturing Conversion Cost
                  ADD t_production_costs1-wkgbtr TO prev_tot_mfgconv_cst.
    BEGIN OF deletion VIP110703
                ADD t_production_costs1-wkgbtr TO t_outputtab-mfgconvcost.
    END   OF deletion VIP110703
              ENDCASE.
            ENDLOOP.
    BEGIN OF INSERTION VIP110703
           READ TABLE t_production_costs INTO wa_production_costs
           WITH KEY objnr = t_production_costs-objnr
                      matnr = wa_prev_outputtab-plnbez.
           IF sy-subrc = 0.
             IF  ( wa_production_costs-mbgbtr NE
                                   wa_prev_outputtab-wemng )  .
               prev_totmatqty = ( prev_totmatqty /
                                  wa_prev_outputtab-wemng ) *
                                 wa_production_costs-mbgbtr.
               prev_tot_mfgconv_cst = ( prev_tot_mfgconv_cst /
                                  wa_prev_outputtab-wemng ) *
                                  wa_production_costs-mbgbtr.
             ENDIF.
           ENDIF.
           LOOP AT t_suborders_propcost
                   WHERE prevaufnr = wa_prev_outputtab-aufnr.
             t_suborders_propcost-proprmcost = prev_totmatqty.
             t_suborders_propcost-prop_mfg_convcost = prev_tot_mfgconv_cst
             MODIFY t_suborders_propcost.
           ENDLOOP.
           clear: prev_totmatqty,
                   prev_tot_mfgconv_cst.
    END   OF INSERTION VIP110703
    BEGIN OF INSERTION VIP111003
            CLEAR: wa_prev_outputtab,
                   wa_production_costs.
            READ TABLE t_outputtab INTO wa_prev_outputtab
            WITH KEY aufnr = t_suborders-prevaufnr.
            ratio = 1.
            IF sy-subrc = 0.
              READ TABLE t_production_costs INTO wa_production_costs
              WITH KEY objnr = t_outputtab-objnr
                         matnr = wa_prev_outputtab-plnbez.
              IF sy-subrc = 0.
                IF  ( wa_production_costs-mbgbtr NE
                                      wa_prev_outputtab-wemng ) .
                  ratio = wa_production_costs-mbgbtr /
                          wa_prev_outputtab-wemng.
                  prev_totmatqty = ( prev_totmatqty /
                                     wa_prev_outputtab-wemng ) *
                                    wa_production_costs-mbgbtr.
                  prev_tot_mfgconv_cst = ( prev_tot_mfgconv_cst /
                                     wa_prev_outputtab-wemng ) *
                                     wa_production_costs-mbgbtr.
                ENDIF.
              ENDIF.
            ENDIF.
            LOOP AT t_suborders_propcost
                    WHERE prevaufnr = wa_prev_outputtab-aufnr
                    AND aufnr = t_outputtab-aufnr.
              t_suborders_propcost-proprmcost = prev_totmatqty.
              t_suborders_propcost-prop_mfg_convcost = prev_tot_mfgconv_cst.
              MODIFY t_suborders_propcost.
            ENDLOOP.
    *Commented by Anand Bothra on 20/11/2003.
            CLEAR: prev_totmatqty,
                    prev_tot_mfgconv_cst.
    BEGIN OF INSERTION VIP111003
          ENDLOOP.
        ENDAT.
        AT END OF kstar.
          SUM.
          CASE t_production_costs-kstar.
            WHEN '0000500200'.    " Packing Conversion Costs
              t_outputtab-pkgconvcost = t_production_costs-wkgbtr.
            WHEN '0005000500'.   " Semi-Finished Cost/Quantity
              MOVE t_production_costs-mbgbtr TO d_mbgbtr.
            WHEN '0005050000' OR '0005050001' OR '0005050002'.
              " Packing Mat Costs
              ADD t_production_costs-wkgbtr TO t_outputtab-totalpmcost.
            WHEN '0005000000' OR '0005010000'.
              ADD t_production_costs-wkgbtr TO t_outputtab-totalrmcost.
            WHEN '0000500100'.      " Manufacturing Conversion Cost
              ADD t_production_costs-wkgbtr TO t_outputtab-mfgconvcost.
          ENDCASE.
        ENDAT.
        AT END OF objnr.
          MOVE d_waers TO t_outputtab-waers.
    Calculations for the Production Order
          " Determine the RM Cost/Unit and Mfg Conv Cost/Unit
          CLEAR t_afpo1.
          READ TABLE t_afpo1 WITH KEY aufnr = t_outputtab-aufnr.
          IF ( ( sy-subrc EQ 0 ) AND ( t_afpo1-wemng NE 0 ) ).
    BEGIN OF insertion VIP110703
           tmp_aufnr = t_production_costs-objnr+2(12).
           LOOP AT t_suborders_propcost
           WHERE aufnr = tmp_aufnr  .
            ADD t_suborders_propcost-proprmcost TO t_outputtab-totalrmcost
             ADD t_suborders_propcost-prop_mfg_convcost  TO
                  t_outputtab-mfgconvcost.
           ENDLOOP.
    END   OF insertion VIP110703
    BEGIN OF insertion VIP111003
            CLEAR: t_suborders_propcost , tmp_aufnr.
            READ TABLE t_suborders_propcost
            WITH KEY aufnr = t_outputtab-aufnr.
            IF sy-subrc = 0.
             t_suborders_propcost-proprmcost =
                 t_suborders_propcost-proprmcost * ratio.
              ADD t_suborders_propcost-proprmcost
                    TO t_outputtab-totalrmcost.
             t_suborders_propcost-prop_mfg_convcost =
                 t_suborders_propcost-prop_mfg_convcost * ratio.
              ADD t_suborders_propcost-prop_mfg_convcost
                   TO t_outputtab-mfgconvcost.
              tmp_aufnr = t_suborders_propcost-prevaufnr.
              bln_suborder = 'T'.
              WHILE bln_suborder = 'T'.
                CLEAR: t_suborders_propcost .
                READ TABLE t_suborders_propcost
                WITH KEY aufnr = tmp_aufnr.
                IF sy-subrc = 0.
                  t_suborders_propcost-proprmcost =
                    t_suborders_propcost-proprmcost * ratio.
                  ADD t_suborders_propcost-proprmcost
                        TO t_outputtab-totalrmcost.
                  t_suborders_propcost-prop_mfg_convcost =
                      t_suborders_propcost-prop_mfg_convcost * ratio.
                  ADD t_suborders_propcost-prop_mfg_convcost
                       TO t_outputtab-mfgconvcost.
                  tmp_aufnr = t_suborders_propcost-prevaufnr.
                ELSE.
                  bln_suborder = 'F'.
                  CLEAR tmp_aufnr.
                ENDIF.
              ENDWHILE.
            ENDIF.
    END   OF insertion VIP111003
    END   OF deletion VIP110703
           t_outputtab-mfgconvcost = ( t_outputtab-mfgconvcost /
                                       t_afpo1-wemng ) * d_mbgbtr.
           t_outputtab-totalrmcost = ( t_outputtab-totalrmcost /
                                       t_afpo1-wemng ) * d_mbgbtr.
    END   OF deletion VIP110703
          ENDIF.
          IF t_outputtab-wemng NE 0.
            t_outputtab-rmperunit = t_outputtab-totalrmcost /
                                    t_outputtab-wemng.
            " PM Cost Per Unit = Total PM Cost / Quantity Delivered
            t_outputtab-pmperunit = t_outputtab-totalpmcost
                                    / t_outputtab-wemng.
            " Conv Cost Cost Per Unit = (Manu Conv Cost + Pack Conv Cost)
            "                           / Qty Delv
            t_outputtab-ccperunit = ( t_outputtab-mfgconvcost
                                    + t_outputtab-pkgconvcost )
                                    / t_outputtab-wemng.
          ENDIF.
          " Total Cost Per Unit = (RM Cost per unit + PM Cost per Unit
          "                       + Conv Cost per unit)
          t_outputtab-totperunit = t_outputtab-rmperunit
                                   + t_outputtab-pmperunit
                                   + t_outputtab-ccperunit.
    Update the calculated values in the internal table
          CHECK d_tabix GT 0.
          MODIFY t_outputtab INDEX d_tabix
                             TRANSPORTING totalrmcost totalpmcost
                                          mfgconvcost pkgconvcost
                                          rmperunit pmperunit
                                          ccperunit totperunit waers.
    BEGIN OF DELETION VIP110703
         MOVE t_outputtab TO wa_prev_outputtab.
    END   OF DELETION VIP110703
        ENDAT.
      ENDLOOP.
    ENDFORM.                    " Z_PROCESS_DATA
    *&      Form  Z_DISPLAY_LIST
          text
    -->  p1        text
    <--  p2        text
    FORM z_display_list.
    Display the Report
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
          EXPORTING
            I_INTERFACE_CHECK        = ' '
             i_callback_program       = d_repid
            I_CALLBACK_PF_STATUS_SET = ' '
            I_CALLBACK_USER_COMMAND  = ' '
            I_STRUCTURE_NAME         =
             is_layout                = wa_listlayout
               it_fieldcat              = t_fieldcatalog
            IT_EXCLUDING             =
            IT_SPECIAL_GROUPS        =
               it_sort                  = t_sortsequence
            IT_FILTER                =
            IS_SEL_HIDE              =
            I_DEFAULT                = 'X'
            I_SAVE                   = ' '
            IS_VARIANT               = ' '
             it_events                = t_listevents
            IT_EVENT_EXIT            =
             is_print                 = wa_print_info
            IS_REPREP_ID             =
            I_SCREEN_START_COLUMN    = 0
            I_SCREEN_START_LINE      = 0
            I_SCREEN_END_COLUMN      = 0
            I_SCREEN_END_LINE        = 0
            I_BYPASSING_BUFFER       =
            I_BUFFER_ACTIVE          =
       IMPORTING
            E_EXIT_CAUSED_BY_CALLER  =
            ES_EXIT_CAUSED_BY_USER   =
           TABLES
                t_outtab                 = t_outputtab
          EXCEPTIONS
               program_error            = 1
               OTHERS                   = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      SET PF-STATUS 'Z_AB_STANDARD'.
    ENDFORM.                    " Z_DISPLAY_LIST
    *&      Form  Z_FILL_FIELDCATALOG
          text
    -->  p1        text
    <--  p2        text
    FORM z_fill_fieldcatalog USING      p_rownum LIKE sy-curow
                                        p_colnum LIKE sy-cucol
                                        p_fieldname TYPE slis_fieldname
                                        p_tabname TYPE slis_tabname
                                        p_reffield TYPE dd03p-fieldname
                                        p_reftable TYPE dd03p-tabname
                                        p_qfield TYPE slis_fieldname
                                        p_qtab TYPE slis_tabname
                                        p_sum
                                        p_stext
                                        p_mtext
                                        p_ltext
                                        p_datatype
                                        p_outputlen.
    Prepare the fields for ALV list output
      CLEAR wa_fieldcatalog.
      wa_fieldcatalog-row_pos = p_rownum.
      wa_fieldcatalog-col_pos = p_colnum.
      wa_fieldcatalog-fieldname = p_fieldname.
      wa_fieldcatalog-tabname = p_tabname.
      wa_fieldcatalog-ref_fieldname = p_reffield.
      wa_fieldcatalog-ref_tabname = p_reftable.
      wa_fieldcatalog-qfieldname = p_qfield.
      wa_fieldcatalog-qtabname = p_qtab.
      wa_fieldcatalog-do_sum = p_sum.
      wa_fieldcatalog-seltext_s = p_stext.
      wa_fieldcatalog-seltext_m = p_mtext.
      wa_fieldcatalog-seltext_l = p_ltext.
      wa_fieldcatalog-datatype = p_datatype.
      wa_fieldcatalog-outputlen = p_outputlen.
      APPEND wa_fieldcatalog TO t_fieldcatalog.
    ENDFORM.                    " Z_FILL_FIELDCATALOG
    *&      Form  Z_PREPARE_FIELDCAT
          text
    -->  p1        text
    <--  p2        text
    FORM z_prepare_fieldcat.
    Append all the display fields into the field catalog internal table
    First Row
      PERFORM z_fill_fieldcatalog USING 1 1 'PLNBEZ' 'T_OUTPUTTAB'
                                        space 'AFKO' space space
                                        space space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 1 2 'MAKTX' 'T_OUTPUTTAB'
                                        space 'MAKT' space space
                                        space space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 1 3 'CHARG' 'T_OUTPUTTAB'
                                        space 'AFPO' space space
                                        space space space space space
                                        0.
    Second Row
      PERFORM z_fill_fieldcatalog USING 2 1 'AUFNR' 'T_OUTPUTTAB'
                                        space 'AFKO' space space
                                        space space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 2 2 'GAMNG' 'T_OUTPUTTAB'
                                        space 'CAUFV' 'AMEIN' space
                                        'X' space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 2 3 'WEMNG' 'T_OUTPUTTAB'
                                        space 'AFPO' 'AMEIN' space
                                        'X' space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 2 4 'AMEIN' 'T_OUTPUTTAB'
                                        space 'AFPO' space space
                                        space space space space space
                                        0.
      PERFORM z_fill_fieldcatalog USING 2 5 'YIELD' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-010 text-010 text-010
                                        'QUAN' 17.
    Third Row
      PERFORM z_fill_fieldcatalog USING 3 1 'TOTALRMCOST' 'T_OUTPUTTAB'
                                        space space space space
                                        'X' text-011 text-011 text-011
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 3 2 'TOTALPMCOST' 'T_OUTPUTTAB'
                                        space space space space
                                        'X' text-012 text-012 text-012
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 3 3 'MFGCONVCOST' 'T_OUTPUTTAB'
                                        space space space space
                                        'X' text-013 text-013 text-013
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 3 4 'PKGCONVCOST' 'T_OUTPUTTAB'
                                        space space space space
                                        'X' text-014 text-014 text-014
                                        'CURR' 21.
    Fourth Row
      PERFORM z_fill_fieldcatalog USING 4 1 'RMPERUNIT' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-015 text-015 text-015
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 4 2 'PMPERUNIT' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-016 text-016 text-016
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 4 3 'CCPERUNIT' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-017 text-017 text-017
                                        'CURR' 21.
      PERFORM z_fill_fieldcatalog USING 4 4 'TOTPERUNIT' 'T_OUTPUTTAB'
                                        space space space space
                                        space text-018 text-018 text-018
                                       'CURR' 21.
    ENDFORM.                    " Z_PREPARE_FIELDCAT
    *&      Form  Z_GET_ALV_EVENTS
          text
    -->  p1        text
    <--  p2        text
    FORM z_get_alv_events.
    Returns table of possible events for a list type
      REFRESH t_listevents.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE     = 0
          IMPORTING
               et_events       = t_listevents
          EXCEPTIONS
               list_type_wrong = 1
               OTHERS          = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        CLEAR: wa_listevents, d_tabix.
        READ TABLE t_listevents WITH KEY name = slis_ev_top_of_page
        INTO wa_listevents.
        d_tabix = sy-tabix.

    Hi Sai,
          You can try using MB51, use filter movement type 261. Add a filter for the posting date coverage.
    Then proceed. Click on the icon DETAIL LIST.
    Then click on the SUBTOTAL, add MATERIAL as a Criteria. The click the column AMOUNT IN LC.
    You should see the total issuances to per material.
    I hope this helps.
    Heinrick Palad

  • Report in SAP -cost of the material in different periods

    Hi,
    Is there a standard report in SAP which will give me the cost of the material in different periods.
    The issue is the material price is changed frequently for a perticular material "X''. I want to have a look at the cost of material in different periods.
    I can track the changes from MM03,but the user needs a feasible solution than this.
    Thanks
    Aravind

    Hi,
    I got the required from MBEWH table.
    Thanks
    Aravind

  • Project Commitment Cost not visible for Purchase Orders with Item Categry Q

    Hello All
    I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
    Request your help with this problem
    Regards
    Renjith

    Hello
    Could you please explain how to maintain that?
    Best Regards
    Renjith

  • Unit costing for materials assigned to activity - for material cost plannin

    The requirement is that material cost to the company will vary depending upon the project/customer. Eg.: Material cost = basic material cost + a % for P&F + 2 % for Clearance + a % for excise + 2 % for insurance + a % for Customs
    It can be a % or a lump-sum value. It can be all the components listed or part of them. This will be project specific.
    Hence the following preference for material cost planning is required:
    1. Material cost based on quotation or Purchase order - If quote/PO is not available, then
    2.Material cost based on unit costing done for the material in the project - If this is not available, then
    3. material cost from material master depending on price indicator i.e. Std cost or Moving average price
    We are working with valuated project stock.
    SAP Help says"
    "Prices are calculated in one of the following ways:
    u2022     Using the strategy in the valuation variant
    u2022     Manually, using the invoicing plan
    u2022     Using unit costing"
    But how to get the cost as per the priority required when these three options are there is not clear.
    I have tried to work with valuation variant in the costing variant assigned to Network. No valuation strategy explicitly refers to unit costing of material.
    During various testings, at times, unit costing of material gets updated as planned cost; at times not. What triggers in also not clear.
    Pl. clarify
    Thanks and regards
    A.Saravanan

    Hi All
    I have psoted to service market place and got the reply; we have implemented also.
    there were 2 suggestiosn:
    1. Valuation price with user exit - (EXIT_SAPLCK21_002) - This user exit has to be implemented; we have implemented - it is working. But this is taking effect when overhead calculation is done - this we rae managing that way now
    2. Alternatively you can try to use BAdI VALUATION_CK.: This BADI is not editable by us now; SAP has not released for our editing!
    The problem is solved although
    There is one more clarification  required:
    As SAP Help documentation: -> Unit costing is used instead of strategy sequence, but not in between steps of strategy.
    How to get this done ? right now we are using the strategy - inbetween steps of strategy with user exit
    Thanks and regards
    A.Saravanan

  • Cost report for the project

    Hi,
    Which report will show the material cost, Equipment cost, Resources cost & Activity cost for the Project.
    Prashant

    Hi,
    If you need actual cost, then CJI3 should be OK.
    Kind regards, Aleksandra

Maybe you are looking for

  • Photoshop CS5 problem - Is this Banding?

    Hi I am using Adobe lightroom 3.0.64 to process RAW photos from my Canon Camera. Then I touch up the pictures in Photoshop CS5. I have been working on some snooted background shots recently and I am experiencing a problem when I edit the photos in ph

  • How to find classes in a java package

    i am writing a java IDE. i want to extract all class names from a java package eg. java.lang (through coding). how can i do that. Thanks in advance

  • Dynamic Calc Member in formula not working

    Hello, I am having an issue trying to calculate a dynamic calc member in a calc script. Lets say this is our outline: OC_GRANDPA (Dynamic Calc) OC_PART1 (Dynamic Calc) (+) Child1 (Calculated at top of calc script - STORED member) (+) Child2 (Calculat

  • Display POPUP in MIGO

    Hi Gurus, i have requirement of displaying popup while saving MIGO. i have tried by implementing the user exit MB_CF001. but it gives a dump saying POSTING_ILLEGAL_STATEMENT can anyone guide me how to implement this? points will be rewarded.

  • How to use headphone jack as audio input

    I just bought a 13" Macbook Air.  I can not seem to find the setting to use my headphone jack as an audio input.  How do I get audio in to record with Quick Time and Garage band??  I am using a sound board that works fine with my 13" Macbook Pro.  I