Material cost not getting displayed in CN41N

Hi Gurus,
When we execute CN41N, Materials assigned to the Network activity are visible but the cost of each material is not getting displayed against it (under Proj. Cost Plan Column) and it is appearing as '0' whereas, it is appearing as an accumulated cost against the activity. I checked SAP notes for this problem, though I could see some notes which are very close to the problem but all are for Release 600 whereas we are using 604 (ECC 6.0). Have anyone encountered such problems or whether the cost will not appear against Material in CN41N.
Awaiting your valuable suggestions.
thanks in advance.
Vinodh

I have seen planned cost of material against material itself in structure report like CN41, CN41N under following conditions:-
1. Valuated Project Stock
2. Material is created using Reservation for WBS or PR+Res for WBS Procurement indicators.
3. Costing relevancy box ticked for material
4. Statistical Cost element exists for Inventory account.
I have not seen planned cost for non-stock item or material with res for network in project. This is purely based on my experience and I dont have any notes or help document to validate my statement.

Similar Messages

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Material no not getting displayed in ME53n

Hello All,
Theres a problem in some PRs.It is not displaying matrial no in ME53n whereas it is dispalying in ME23n.The material description is getting displayed.It is also making the material in Item tab(material data) to be in invisible mode.Is there any config setting done?
Thanks,
Rakesh.

Hi Rakesh ,
Check the Screen Layout of Purchase Req in SPRO :
Purchasing -> Purchase Requisition> Define Screen Layout at Document Level
Regards
Ramesh Ch

Material field not getting displayed on Material Data tab in ME51n or ME21N

Material Field was missing in ME51n/ME21n.
I went into SPRO ->PReq-> Define Screen Layout at Document Level and checked Optional for Material field. Now it's showing up on the ITEM overview section of the Preq.
But its still missing on Material Data tab in ME51n or ME21N but I can see the Material field on the Item Overiew section of the Req/PO Screen.
Where exactly do I make the settings for the item level in SPRO?

We use the Enjoy screens and document types for ME51N/ME21N pretty much out of the box. We do not have the material master number on any of the detailed item tabs either. I do not think you can show it in the details unless you activate the customer specific fields tab.
Regards

MD06 Issue - Planned orders not getting displayed

Hello,
Planned order with the exception "Newly created order proposal" does not get displayed in MD06 with the option "Only Unprocessed MRP Lists" in the processing indicator.
I am running MD06 report with the following parameters:
Plant
MRP Controller
Exeception Group - All exception selected except 8-Terminations
Processing indicator - Only unprocessed MRP LIsts, Only with new exceptions
My material which has a newly created planned order thorugh MRP run with exception "1 - Newly created order proposal" does not get displayed.
Only when I specify Only processed MRP lists or All MRP LIst in the processing indicator, this material gets displayed. The planned order is for a Stock Transfer order to this plant (receiving plant). How is the MRP LIst processed?
Please help me out with this issue.
Sincerely,
Ketan

Hi Ketan,
When you execute the MD06 report, you would find a column with the heading CI, if am right it would be just after the MRP cntlr, here you would find a Pencil & a tick mark. If you find them both, it means the row is unprocessed, but if you find only a tick mark it means that the row is processed.
So now check for the planned order, it would be just a tick mark & hence would be showing only for the processed MRP list or all MRP lists.
To process a row or unprocess, just click on the icon & it changes.
Check & revert if it answers your query.
Regards,
Vivek

Terms and conditions not getting displayed on the last page

Hi All,
I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
Can you please help me how to make the terms and conditions get printed on the back side of the last page.
Thanks,

I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.

Problem in BADI, error message not getting displayed

Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
           AND l_s_eban-matnr EQ space.
          MESSAGE e000(zm_msg) WITH 'You cannot create'
            'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Planned Independent Requirement Not getting displayed in MD04

Hi,
I am assigning material to nwa and doing advance procurement by using procurement type PIR. Reservation is getting created after release of activity but the same is not getting displayed in MD04.
The items of the reservation are getting displayed in MB23.
what could be the reason for this?
Regards,
B P Singh

Hi,
Planned Independent requirements (PI) are normally configured for consumption by 'Dependent' requirements. Hence the PIR would have been replaced by the reservation from 'dependent' requirement. You can test and verify the same in development system.
Regards
Murali

Fields not getting displayed in Sapscript

Hi Guyz,
I have a customized Sapscript form ZPV_INVOICE and its print program RVADIN01. This form outputs the Sales Invoice. When the print preview is triggered, Material number (MATNR) is not getting displayed on the form. However, when the form is debugged, MATNR values are properly fetched and showed (while debugging only, not in output).
Can somebody please let me know the reason, why the MATNR is not getting displayed on the output, even though it is showing values while debugging.
Thanks in advance !

Hi ,
Then check matnr field which is display is same what you are checking in debugging .
COnfirm the field and check whether data stays till end of module .
regards
Deepak.

Selection tet -description not getting displayed

Hi,
In abap program, the text for the selection text is not getting displayed. For ex. for field p_matnr which is nothing but mara-matnr, the text name Material number is not getting displayed and instead it shows p_matnr on the selection screen. I have activated the dictionary check box on the selection texts still it is not working. The strange part is the same Selection text 'P_MATNR' displays the text correctly in another report but on this report even if i uncheck and check the dictionary check box it does not display. Has soneone faced this before?
Thanks,
Prem

Hi.,
Try this.,
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c1 .
PARAMETERS : P_MATNR LIKE MARA-MATNR.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK 1.
INITIALIZATION.
c1 = 'Material Number:'.
hope this helps u.,
Thanks & Regards,
Kiran

Material Cost Not Shown in Production Order if planned with MD50

Hi,
We have run MRP MD50 for a sale order item ie FERT material which has BOM Items. All the stock of the BOM items is tranfered from Unrestricted Stock to Sales order stock. FERT ITEM planned order is converted to Production Order and all the BOM items sales order stock is issued against PO & Sales order no with Movement Type 261E.
After confirmation and goods receipt stock of FERT is shown under sales order Stock of Fert Material.
We can see the cost of operations but cost of materials consumed against the Production order is not displayed in Production order Cost analysis..How material cost can be displayed????
If i create PO with out refering the sale order that is normal process i can see the cost of materials triggering in Production Order.
Can we settle the varience when we are planning against sale order???
Some one Pl help us.
John

Dear,
Check your variant which showes the cost. See the following report
KKAC - For Sales Order with Assigned Orders or
KKBC_KUN - For Sales Order or
KOB1 - Actual Costs

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Material cost not getting displayed in CN41N

Similar Messages

Maybe you are looking for