Material Creation Date and Time

Hi,
Is there any place which stores the material creation date and time. We have checked table MARA, but that only has the creation date of the material, but does not give the material creation time. We have checked table CDHDR, but that only seems to have the material change date and time.
From where can we retrieve the material creation date and time.
Thanks and Regards,
John

Actually, CDHDR and CDPOS will have the value. The CDHDR record will be marked as a 'U" record but look at the corresponding CDPOS record for MARA and it will be marked as an 'I' record.

Similar Messages

Automator- create file names with creation date and time

I have photo files that I want to rename with a base name, plus a sequential number, based on the creation date (and ideally time). It appears that Automator does not honor the time of the source file when date stamping a new set of files. If there is anyway to use date + time so I can recreate a date_timestamp in addition to a base filename, that would be great.

Hi Nikhil_BI_Dev,
According to your description, you find your report runs properly in BIDS but shows blank after deploying onto report server. Right?
In this scenario, it might be the issue on retrieving data in SQL 2005. Here is a thread with same issue, please refer to the link below:
Detail report is blank after deploying
Reference:
Using SQL Server 2005 Reporting Services with SQL Server 2005 Express Edition
If you have any question, please feel fee to ask.
Best Regards,
Simon Hou

How to find the shipping point creation Date and time

Hi All,
Could you please help to solve this issue.
Some of the users created shipping point, Now I have to find out in which date and time the shipping points were created, is there any table to find. please help me.
Regards,
Muralikrishna

hi Murali,
first define and assign shipping point in enterprise sructure in define shipping point EC07 and assign in OVXC
goto OVL2 and assign the shipping points
The following are used for the shipping point determination:
1. Shipping conditions - Proposed from CMR. The entry in VOV8 for the sales document type if there overwrites the entry in the shipping conditions mainatined in the CMR.
2. Loading group - Proposed from the material master record.
3. Plant - proposed from CMIR - if not found then CMR - if not found then MMR.
But you should first define and assign the shipping point in the "enterprise structure" otherwise you will not be able to do the shipping point determination.
IMG - logistics execution - shipping - basic shipping functions - shipping point & goods receiving point determination - assign shipping points.
Shipping point definition:
IMG - enterprise structure - definition - logistics execution - define, copy, delete, check shipping point. You have to define the shipping point here for the particular plant.
Shipping point assignment:
IMG - enterprise structure - assignment - logistics execution - assign shipping point to plant. Here select your plant and assign the shipping point to the same.
hope this helps,
cheers,
Hema.

Sort by Creation Date and TIME!

I need to sort hundreds of images taken by three photographers and on six different cameras. I sort by Image Date, but it keeps each photographers images together, seems to sort by DATE only, then by file name.
I have used iView Media Pro to sort this way and it is a GREAT way to organize this type of work. Is there a way to refine how Aperture 1.5.1 does this type of sort?
At this point, my option appears to be to export my final picks, then resort and rename them in iView Media Pro.

In the browser section, I clicked on the list view (control-L is the shortcut) and then clicked on the "Image Date" header, and saw all my images sorted by date AND time. Is this what you're looking for? If all the photographers shot on the same date and time, then they'd be intermingled I suppose, but if the times were separated, this should work. Give it a shot anyway.
Mark

Created date and time

Hi experts,
How can i view the created Time & date of a sales order and its invoice.And also the changed time and date.
Many Thanks In advance.
Abhishek

Hi,
Goto the T.Code "SE11/SE16".
Enter the table name as "VBAK".
Enter your sales order number into the field "VBELN" and then Execute.
Get the Created date from the field "ERDAT" and time from the field "ERZET".
Next for getting the creation date and time for Billing document,goto the table "VBRK".
Pass the billing document number.Execute.
Get the Created date from the field "ERDAT" and time from the field "ERZET".
For getting the changed details,there are different ways.
One such easiest way is goto the T.Code "VA03",Enter your order number.
Click on Environment-->Changes.
Select "Overview" and "Additional Info".
Execute.
Select your entry and click on choose.
Here you will get the date and time.
The similar thing is for billing document changes also use teh T.Code "VF03".
Or one more way is pass the Order number preceeded by two 0's into the field "Object Id" in the table "CDPOS" and then execute.
Get teh Changenr.
Pass the same to "CDHDR" table to get the UDATE and UTIME.
Regards,
Krishna.

How to check the date and time when a material is blocked

Hello,
Please tell me how can i check the date and time when a material is blocked or unblocked.
Regards,
Priyanka

Hi Pryianka,
Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
BR
Csaba

Material master data and Asset

Hello Guys
Considering the every material master data that I am buying will end up been an Asset in my company.
I would like to know how can I alredy related the material master data that I am creating with a possible hierarchy to make it esier at the time of creating the asset?
Some one could briefly explain to me how can I related the material master data and a creation of an asset in SAP?
thanks

Hi guys
Jignesh Thakkar
That was really good answer you gave it is according with the Help instruction that I read, but the main point for me is that I will not know the asset description or capitalized date or serial number, location, etcu2026 until I goods receipt the individual material creating serial nods and the equipment master data.
In this scenario from the equipment master data is there any way to create an Asset master data, create the asset master data with the information of the GR equipment master Data or populate the Asset AS01 with the equipment master data?
Otherwise I will need manually create the Asset and manually synchronize the equipment with the asset?
Thanks Guys it have been incredibly helpful this network I hope I can help some one in future as it have been helpful for me at the moment.
Carlos

How can you determine a file creation date and know if it's been altered since the creation date

I need to know how to determine a file creation date on an ipad. If someone creates a document/note on an ipad how can you tell when it was created and if it has been altered since?

Unless you are using a third party app that provides that functionality, in iOS the only thing youcan access is the last edit/save date and time, which is fairly evident in the user interface for documents and notes. Some apps that handle MS Office files may provide that, but ican't say first hand.

Po creation date and release date during print po.

hello all,
i want to add po creation date and changed on date,po releasing date in printout of po.
is there any standard settings available for this or i have to go for abaper help?
what is the table and field for these addition.
i know CDHDR and CDPOS TABLE USED FOR CHANGE IN PO.
REGARDS
SUMIT SIMRAN

HI,
There is no logic in this requirement, as we know everything is possible through ABAP, it doesn't mean we need to address each & everything asked by business.
PO contains number of fields and it is possible that the user can change many fields, if that is the case are we going to communicate to the supplier for each & every change?, i think that is useless for supplier also.
in standard SAP we have certain fields for which any changes made then system will trigger release process if any,
or system will generate the output again.
If the output is generated immediately after the change, then the output date & time itself is a change date. no need to mention again in the print output.
As a Consultant we need to convince the user , so that our effort can be used in a better way.
Thx
Raju

Dates and times in APO

Hi All
I am getting bit messed up with different dates and times in R/3 and APO. Could you please provide me some details on the relation and where these dates and times are maintained in APO and R/3
1. Transit Time:
Is it Total Replenishment time, Planned Delivery Time
Is it maintained in Purchase Infor Record or Transportation lane
2. Material Availability Date
Can PPDS works on MAD or only on Delivery Requirement date (as in RRP3)
3. Does PPDS Considers
Goods Issue Time, Goods Receipt time, Load Time / Pick Pack time for scheduling the order or for total duration of the order. As in DS it can show if the order can be on time or delayed with respect to delivery time! (in Network view of DS) so it considering the transit time and all other time maintained!
Please let me know how to straighten these things out!
Thank you in advance

RK,
However in RRP3 and Planning Book and DS board I am getting the delivery date only, Is there something I need to check on customizing for this, please suggest!
The date that is displayed in these screens is the requirement date used by planning.
Are you attempting to implement ATP in SCM? Delivery/transportation scheduling must be performed in SCM. During GATP, delivery date from ERP is passed to SCM. SCM performs scheduling and calculates the MAD. Without the scheduling, then delivery date = MAD. http://help.sap.com/saphelp_scm700_ehp02/helpdata/EN/05/f8923945b12c4de10000000a114084/frameset.htm
Best Regards,
DB49

Material creation date for perticular plant

Hello Experts,
I have four plant have a same material,so i want to see the material creation date by plantwise.Please suggest me where can i see the material creation date by plantwise? Bcz. I want to develop report for this.
Thanks & Regards,
Vinay

Hi,
Go to T.Code: MM60,Then enter your required plant and execute.
Now you can see the material with created date or last change date and who created.
If helpful then reward.
Regards,
Biju K
Message was edited by:
Bijay Kumar Barik

Automatic file generation using system date and time

Hi guys,
Iam trying to generate a path for file creation automatically using System date and time. I am running into errors with respect to special characters in filename. I am trying to parse the string to get date and time without the '/' and ':' but have not been successful. is there a better way to do it? Please help! I am trying to avoid a dialog box for user to enter a filename.
Thanks!
V
I may not be perfect, but I'm all I got!
Solved!
Go to Solution.

here is a little experiment .... building the path out of %m (month) %d (day) %(year) type stuff might help.
Attachments:
putting time in path.vi ‏7 KB

How to find the Date and Time of Modification of Column in aTable?

Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar M

I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

Can I print the date and time using aperture 4

Work inspectors require that I provide pictures with date and time of creation from the metadata info. I was looking at google searches and found Aperture with borderFX plug in might work. Can anyone confirm this is a fact? I would hate to pay for the software to find out this feature is not available during export.

BorderFX and Aperture are a great combination for framing and annotating your finished photos. I like to second Frank Caggiano's answer.
I am not sure from your post, if you already have Aperture, so just an add-on: BorderFX works also with iPhoto as an "Export" plug-in.
You can access it in the "File > Export" panel, when saving a photo.
If you do not own Aperture but iPhoto, you can try BorderFX first with iPhoto and see if it will suffice for your purposes. BorderFX is "Donation ware". You can try and explore it freely, before you donate.
BorderFX - iBorderFX iPhoto
An Example:

Date and Time adjustments for multiple photos

Hello, thanks for providing the space for new users, and thanks in advance for your assistance.
I am currently moving out of apple aperture/iphoto and across to lightroom 5.
The OCD part of me likes to have my library organized, and I noticed that when I transferred my library across it is in a bit of a mess, so I am currently in the process of organizing the library and cleaning it up (approximately 18000 photos)
Any how, I have almost settled on a folder structure (YYYY/MM - I feel for the number of photos I have trying to nut down to day might be to much - happy to receive advise on this also)
For the most part, the photos have correct date and time from the commencement of the digital era (for me 2006 onwards)
Photos pre 2006 are in negative form, and I am currently in process of having these scanned and imported into library, I have a batch done every month. Adjusting the date and time from the creation date is where I am running into trouble.
I have looked around the web and various forums to no avail.
Firstly, I organize the photos into the correct order. I then select the first photo and the then select the remaining photos. I then select the adjust date/time from the menu and select the first option, adjust to new date and time, lets say 01/01/1990 at 1200 PM.
The result I end up with is the first photo (the more selected photo if correct term) has 01/01/1990 @ 1200 as date and time, the remaining have 01/01/1990 as date (if I am lucky), and the times jump all over the place. Sometimes it wont even change the date time for the remaining photos.
What I am trying to achieve is either the same Date/Time for all the photos when I select a batch, or have them increment in time by a standard amount (i.e 1 minute (1200/1201/1202) or 1 second (1200:00/1200:01/1200:02)), and I just dont seem to be able to work this out to automatically do this, currently I have to achieve this by a manual adjusting each photo (some 200 at a time) which is really labor intensive
Thanks in advance, and hoping an easy solution
Regards
Dean

Thanks, that seemed to fix the problem.
Workflow is:
1) In grid view arrange photos in correct order
2) Rename photos with a name & sequence (i.e. photos-1), this appears to then keep the photos organized as how I had arranged in grid view
3) Export photos & delete original photos from my master library
4) Open exported photos in an EXIF editor and change date & time to a common format (I am currently using the seasons as a guide, i.e. the photos that I recall being taken in spring are dated the first day of spring, using noon as the time)
5) Import back to Lightroom and organizing as per my usual structure.
This has allowed me to easily batch change date and times, keeping the correct order and has drastically reduce my workload, thanks for the suggestion!

Material Creation Date and Time

Similar Messages

Maybe you are looking for