Material definition

Hi,
Our company sell car parts. But we have our electronic parts catalog - a software which display our stock and other usefull things. We sell this electronic part catalog to our customer for a very low price. This thing is not important...
The problem is that I have to create a material for billing this electronic catalog.
So, can anyone tell me, when I create a new material in MM01 what should I put on:
- Material Group
- General item category group
- Item category group from material master
- Account assignment group for this material
- Material Pricing Group
I have defined G/L accounts. After creating material what should I have to do in VKOA? How to creata a new Account key? Which conditon type I have to use?
All clues, helpfull answers, ideas will be rewarded.
Thank you.

hi,
Our company sell car parts. But we have our electronic parts catalog - a software which display our stock and other usefull things. We sell this electronic part catalog to our customer for a very low price. This thing is not important...
The problem is that I have to create a material for billing this electronic catalog.
So, can anyone tell me, when I create a new material in MM01 what should I put on:
- Material Group
i dont think so material group is important
- General item category group
ofcourse general item category is imp for sales procc of this material
- Item category group from material master
with the help of item cate group only system can understand that what type of material (is it sub for del billing or etc) so it is imp
- Account assignment group for this material
i dont think so this is important
- Material Pricing Group
ya material pricing group shd also be maintained
I have defined G/L accounts. After creating material what should I have to do in VKOA? How to creata a new Account key? Which conditon type I have to use?
you no need to do any thing for material in VKOA as it is used to combine the sales organisation and G/L account and account keys.
already the acctng keys are assigned in pricing procedure.
just we have to maintain the comb

Similar Messages

  • Frequency dependent reactance in material definitions

    I am trying to run a simulation for a material with a frequency dependent reactance. However, when I attempt to enter a variable for the frequency in the material definition I receive the following errors:
    Global Definitions
    9:50:04 PM   frq - Equation Error: Variable not found '_FREQ'
    EM Structure 1
    9:50:04 PM   STACKUP.SUB : Error evaluating parameter 'React' (Equation Error: Variable 'frq' is not valid). (Click for help.)
    In both global definitions and schematics, I have tried establishing a variable for frequency as suggested in the examples by assigning frq<<_FREQ. I also created an equation to use for the reactance, ex.  x(f) = (2*_PI*f). I then entered x(frq) for the reactance in the impedance defintion of the Material Defs tab of the enclosure properties. These simulations were attempted using AXIEM.
    Any help would be greatly appreciated.
    Solved!
    Go to Solution.

    There are some capabilities to make some materials frequency dependent for AXIEM.  
    Please see the attached project.   Output equations write some equations and are plotted to help define the equations.  the STACKUP does NOT use these it is just for debugging purposes. 
    Then for some parameters you can enter a frequency dependency, this example is doing this for Er and TanD.
    I am not sure exactly which parameter you want to make frequency dependent, I am pretty sure you can set this for the ResSQ, and React.  
    This should get you going. 
    Attachments:
    FreqDepMatl.zip ‏21 KB

  • Materialized view refresh is very slow in production

    Hi,
    I am using Oracle 10.2.0.4.0 version and facing problem in Materialized view refresh in production.
    There is a set of Materialized views (15 Mviews) are refreshed through refresh group in production every week or adhoc basis. And for refreshing it is taking 5hrs. I have refreshed the same set of Materialized views multiple times in development environment through refresh group but it got refreshed within 3min. The structure of materialized base tables, type of materialized view refresh, materialized definition and volume of base tables are same between development and production. The production disk space also larger than development. But I am not sure why in production the refresh is very slow compare to development. As this is very critical can some one help on this?
    Thanks is advance.
    - Gopinath.

    Is it fast refresh Mviews? If yes, then check size of materialized view logs. Also check is any other mviews registered on those tables and not refreshing.
    select log_owner, master, log_table, REFRESH_method, version,
           owner, name as ragistered_snapshot, snapshot_site, current_snapshots last_refresh_time, sl.snapshot_id
    from dba_snapshot_logs sl,
         dba_registered_snapshots rs
    where sl.snapshot_id = rs.snapshot_id (+)
    order by 1,2,3 
    ;

  • Vendor confirmation best practice or whitepaper

    Do anyone have a best practice document or whitepaper from SAP or customer? I would be appreciated.
    Thanks.

    Hi Ranjan,
    As far as best practice for confirmation creation goes , it should be decided by who is the goods recipient , what access the goods recipient have and  and what type of material it is , direct or indirect ..
    Ideally  for most of Indirect procurement where requestor is creating a cart for himself or his department and would be reciving the good/ service himself , he/she should do the confirmation in SRM.
    In case of direct material definitely GR  need to be done in the ECC.
    Thanks
    Iftekhar Alam

  • Best practice for confirmation creation?

    Dear Experts,
    I would like to have your opinion on best practices for confirmation creation in classic scenario. Whether most organizations  prefer to create confirmation in SRM or ECC? One advantage of confirmation creation in SRM is that you can avail different workflow scenario, while ECC MM does not support any workflow or release strategy for confirmation/goods receipt.
    Your input on it will be highly appreciated.
    Regards,
    Ranjan

    Hi Ranjan,
    As far as best practice for confirmation creation goes , it should be decided by who is the goods recipient , what access the goods recipient have and  and what type of material it is , direct or indirect ..
    Ideally  for most of Indirect procurement where requestor is creating a cart for himself or his department and would be reciving the good/ service himself , he/she should do the confirmation in SRM.
    In case of direct material definitely GR  need to be done in the ECC.
    Thanks
    Iftekhar Alam

  • Reg: Cannot Importing B2mml XSD's successfully into PI External defnitions

    Hi! PI Team,
    I would like to know one interesting topic about B2MML structures. Here as per my requirement we are trying to integrate MES application with ECC by means of PI 7.1. For that I received List of XSD's with B2MML Strucutures.  on ECC side we are going for control reciepe for Process Order. and IDOC for Material Master.
    ISSUE::
    Even though as per my knowledge we cannot import successfully those b2mml xsd's into PI successfully I tried Since I received XSD's at MES appliction side I tried to import those XSD's into PI External Defnition
    I tried actually importing Materialdefinition xsd but I got an error instead of fields for each and every field I am getting that
    <b> Material Definition and as a type as APLLICATION error instead of xsd:: string or  something else.
    Can any one help me  out regarding this and how to import those structures succesfully and also let me know or provide the links if you are having XI scenarios for MES and ECC integration
    Note::</b>  I already gone through few B2mml links but i didn;t found any ans in those.
    Regards::
    Amar Srinivas Eli
    Edited by: Amar Srinivas Eli on Aug 30, 2009 12:52 AM

    Hi!
    Thanks for your immediate reponse but these are not the right one because I zip file which I received from the client contains nearly lots of XSD's but which when I am imporing into PI I getting in this form
    I am getting for field names Instead of Field Names as MAterial Definition and type as Applciation some thing..
    Pelase let me know whether I need to change my XSD or not ? If yes How to change ? or else plse gudie  me in a right way ?
    Regards:
    Amar Srinivas Eli

  • Process SFCs

    Hi Expe'rts,
    I am new to SAP ME. I am trying to build a demo project in ME. I have followed the instructions as per the ME help and training manual.
    configurations done:
    I have created master data (material, BOM, routing, work centre, resource) and sent it to ME.
    Created production order, sent to ME - POIT
    MIGO - GI done ( 261)
    received the inventory in ME using inventory ID
    released the shop order in shop order release - SFCs generated as per config in next number maintenance.
    POD configured - standard POD
    Issue that i am facing is
    1) when i am processing the SFCs in POD, i see always the SFC status in In Queue though i have selected start and complete button and after entering some assembly data.  Why the SFC status does not change to done or completed and not moving automatically to the next operation as mentioned in routing. Also sometimes, when i select the complete button, i am getting an error message 12001 (VALID_FROM is missing). what is the reason for this error
    2) when i am trying to log an NC in a POD, in the NC client page, after i select the ADD button, i get VALID_FROM is missing error.
    3) I am not able to see any operation level confirmation and inventory reduction getting updated in ERP though i have done the necessary changes in colloborative directive maintenance in transport parameters. Should we have to mention anything in input parameters thatwe configure in transport parameters url.
    4) Also i am trying to set up some data to be collected during assembly and the necessary configs done in data collection maintenance, certification maintenance, user cert assignment and material maintenance. but i am not able to see the datas in POD.
    Kindly clarify the above doubts.
    Thanks
    S.Mahalakshmi

    Hello Mahalakshmi,
    1) SFCs in the Task List (Start has not been performed) are in status "In Queue" or "New". After Start, the SFCs will appear in the Active Work List and the status will "Active". After Complete, the SFCs change the Status to either "In Queue" at the next operation or to "Done" if the last operation has been completed. There are few more SFC states, but that is the general idea.
    2) No idea.
    3) If every thing is setup correctly, ME will send the yield confirmation after Complete at the operation (to the corresponding ERP reporting step). ME will report only inventory reduction for GI with movement 311, not for 261.
    4) You have to configure Data Type (Maintenance / Product Configuration / Data Type Maintenance) for Category Assembly. Then you have to add the Assembly Data Type either to the BOM component or to the material definition (tab Build / Data to Collect on Assembly).
    I hope that helps.
    Best Regards,
    Miguel

  • Setting the color of 3D EM Structures

    i have no issues setting the color i like for the 2D layer drawings. 
    and they are also correct on the 3D of the schematic layout
    however my problem is in setting the color in 3D layer for EM structures. They seem to be different.
    I tried setting the color of my material definitions (topmetal) under the material definitions tab of the STACKUP.
    but the color does not correctly translate in the 3D EM structure.
    please advise.

    i got it correctly setting the color of the 2D and 3D for EM structures by following your suggestion in setting the COLOR KEY. that's new to me. thanks
    but my major problem is still unsolved where the color settings of my 2D/3D schematic layouts is different from 2D/3D EM structure layout. I always set the color in the LPF file. for my case for example, my topmetal is defined in lpf as RED. but then when i draw shapes in 2D EM structure, the color for this topmetal layer becomes BLUE...quite lost on this because there's only 1 way to set the color in LPF under "General, Drawing layer 2d"...

  • Datei löschen?

    Kann Adobe AAMupdater Datei "CSU Tracker.mtl" gelöscht werden? Nimmt 815 GB Speicher ein. Die  Datei ist scheinbar beim Wechsel auf OS X 10.10.1 gebildet worden und belegt meine Festplatte.

    Niemals von dieser CSU Datei gehört.  
    mtl Dateien:
    Materials that describe the visual aspects of the polygons are stored in external .mtl files. More than one external MTL material file may be referenced from within the OBJ file. The .mtl file may contain one or more named material definitions.

  • Takes along time to view a materialized view definition

    Hi,
    Using owb 11.2.0.3 and takes a long time to see any materialized view definition which is based on a particular table (talking a few minutes compared to over a minute compared to seconds
    to see other mview definitions.
    platform aix.
    8 million rows in base table.
    Thoughts as to why this would be case?
    Thanks

    user5716448 wrote:
    Hi,
    Using owb 11.2.0.3 and takes a long time to see any materialized view definition which is based on a particular table (talking a few minutes compared to over a minute compared to seconds
    to see other mview definitions.
    platform aix.
    8 million rows in base table.
    Thoughts as to why this would be case?
    Thanks
    post actual EXPLAIN PLAN

  • Materialized view definition from export

    Hi,
    Long time Oracle developer, first time poking with imp - I'm trying to find the definition on a materialized view from the dmp file, using windows.
    I've used:
    imp userid=dev/pwd file=C:\OraExports\DEV.dmp  show=Y fromuser=devmgr touser=devmgr 2> c:\scott_all.txt
    but can't locate the object I'm looking for - only the synonym of the same name.
    Are snapshots included in a typical export? Any other suggestions for locating the SQL defn?
    Cheers,
    Scott

    Hi,
    What is the DB Version you are using. If its 9i there is some restriction with Export/Import. remove the cluse fromuser/touser and then Try.
    Materialized View Concepts and Architecture
    Are snapshots included in a typical export? Any other suggestions for locating the SQL defn?
    You can user the dbms_metadata.get_ddl for the Sql definition, If your DB is in 10g and Above Version you can use the Datapump Export/Import.
    HTH

  • Materialized View Definition

    Can we use PIVOT in Materialized View Definition ?
    Thanks
    Dheeraj

    782331 wrote:
    Can we use PIVOT in Materialized View Definition ?
    Thanks
    DheerajWhy not try it out and see?
    It should likely take you 1 minute to put together a simple test case.

  • Definition of reservation for material

    Dear All,
    can ne one provide me the definition of reservation for material .
    regards
    sap11

    Hi,
    A reservation is created for stock material if it is available.
    For more check the Links:
    http://www.sapbrainsonline.com/PROJECTS/FUNCTIONAL/create%20a%20reservation%20using%20transaction%20MB21.html
    http://www.scribd.com/doc/2229266/MM2007Reservation-Goods-Issue
    Regards,
    Biju K

  • Is the new feature of material status definition is supported in ASCP r12

    Hi all
    I am facing new requirement from Customer which is on R12.
    They have a warehouse which by definition is non Nettable. This  warehouse manage by locators.
    Customer requirement is that group of locators in the warehouse will be nettable despite that the warehouse it self set as non nettable.
    They can't set those locators in different nettable warehouse.
    My question is releated to the new feature of material status definition on R12 as a nominate for solution for this issue.
    As I saw I can set material status as nettable and assigned it to the locator.
    I haven't test it yet and I will appreciate your best practices /knowledge feedback  If this feature supported in ASCP
    Thank in Advance

    Hi,
    First of all, Warehouses cannot be nettable/non-nettable. I assume when you say warehouse you are referring to Sub-Inventory. You can only have a nettable/non-nettable sub-inventory.
    The precise answer to your query on material status is NO.
    As of now ASCP does not have the capability to plan based on the material statuses defined in source.
    ASCP do not collect the Material Status related information.
    You may refer to the following ER:
    Bug 17014198 : DATA COLLECTIONS NOT COLLECTING SUPPLIES FROM NON-NETTABLE SUBINVENTORY
    Hope that helps!!
    Regards,
    Mohan Balaji
    NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

  • Materialized view definition in oracle 9i

    How do we find the definiton (or the script) of a materialized view ? I am using oracle 9i and toad. The script tab of toad throws up the 'create table' script and not the original sql which defined the materialized view.
    Please help.

    You can use DBMS_METADATA :
    SCOTT@orcl SQL> create materialized view mv_emp
      2  refresh fast on demand with rowid
      3* as select empno,ename,job,sal from emp
    SCOTT@orcl SQL> /
    Materialized view created.
    SCOTT@orcl SQL> set long 100000
    SCOTT@orcl SQL> select DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW','MV_EMP','SCOTT') from dual
    SCOTT@orcl SQL> /
    DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW','MV_EMP','SCOTT')
      CREATE MATERIALIZED VIEW "SCOTT"."MV_EMP"
      ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOG
    GING
      STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
      PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
      TABLESPACE "USERS"
      BUILD IMMEDIATE
      USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
      STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
      PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
      TABLESPACE "USERS"
      REFRESH FAST ON DEMAND
      WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
      DISABLE QUERY REWRITE
      AS select empno,ename,job,sal from emp
    SCOTT@orcl SQL>                                                                               

Maybe you are looking for